Alin Jerpelea ffb4f00da9 Merged in alinjerpelea/nuttx (pull request #944) ...

drivers: sensors: add I2C Bosch BMP280 and I2C Asahi AK09911/AK09912 Compass Sensor

* drivers: sensors: add Bosch BMP280 Barometic Pressure Sensor

    add driver for the Bosch BMP280 barometic pressure sensor
    This sensor is connected over I2C bus

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: sensors: add Asahi AK09911/AK09912 Compass Sensor

    add driver for AK09911/AK09912 Compass sensor over I2C bus

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>

2019-07-10 11:31:36 +00:00

..

1wire

…

analog

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

audio

Fixes warnings from header files:

2018-11-09 09:10:28 -06:00

binfmt

binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes.

2019-01-26 11:34:40 -06:00

can

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

contactless

Merged in raiden00/nuttx_l0f0 (pull request #848)

2019-04-05 15:49:45 +00:00

crypto

This change:

2018-12-19 08:42:48 -06:00

drivers

Merged in raiden00/nuttx_pe (pull request #779)

2018-12-09 16:31:57 +00:00

eeprom

drivers/eeprom/i2c_xx24xx.c and include/nuttx/eeprom/i2c_xx24xx.h: Add support to Microchip AT24CM02

2018-12-30 11:20:03 -06:00

fs

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

i2c

include/nuttx/i2c/i2c_master.h: Fix a small typo.

2018-12-07 18:53:57 -06:00

input

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

ioexpander

sched/signal and related changes to other OS subsystems.

2019-01-27 09:28:59 -06:00

lcd

include/nuttx/video/edid.h: Move here from include/nuttx/lcd/edid.h

2019-07-07 18:19:01 -06:00

leds

…

lib

Re-verify ez80 build. Fixes to other ZiLOG architectures broke ez80 again.

2019-06-03 19:04:24 -06:00

mm

mm/iob/iob_notifier.c: Don't check iob_navail in iob_notifier_setup to avoid a potential race condition.

2019-01-26 09:43:54 -06:00

modem

…

mtd

Extends the MTD configdata device with the following features / additions:

2018-12-20 14:14:40 -06:00

net

include/nuttx/net/net.h: Fix some long lines.

2019-07-01 09:18:38 -06:00

nx

graphics/nxterm: Add a new IOCTL that can be used to inform NxTerm that the size of a window has changed.

2019-05-16 13:12:24 -06:00

power

drivers/power/pm_activity.c: Add pm_staycount API for get stay numbers. This function is currently not used and a waste of FLASH space.

2019-01-27 11:19:26 -06:00

sensors

Merged in alinjerpelea/nuttx (pull request #944)

2019-07-10 11:31:36 +00:00

serial

arch/arm/src/stm32f7/stm32_serial.c: This adds the ability to invert and swap RX/TX on STM32F7 UARTs. I added the TIOCGINVERT as well to reserve the IOCTL number, but did not implement it. This is the same as for TIOCGSINGLEWIRE.

2019-07-03 09:23:18 -06:00

spi

configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile.

2019-06-16 14:45:38 -06:00

syslog

arch/arm/src/common/up_initialize.c: up_initialize.c needs to know about ramlog_consoleinit()

2019-05-04 18:28:43 -06:00

timers

configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile.

2019-06-16 14:45:38 -06:00

usb

Still fixing new warnings found in build testing.

2019-07-01 15:56:34 -06:00

video

include/nuttx/video/edid.h: Remove unused hskew field. Original field ordering restore to match initializer.

2019-07-08 06:42:43 -06:00

wireless

Merged in masayuki2009/nuttx.nuttx/add_ch_setting (pull request #943)

2019-07-10 11:26:39 +00:00

.gitignore

…

addrenv.h

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

arch.h

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

ascii.h

…

board.h

arch/ and config/ files: All board interfaces (those starting with board_) must be defined in board-specific logic. Otherwise, they cannot be customized of specialized usage by different boards. The board_reset() interface was defined in architecture-specific logic that only called up_systemreset(). That is useless!

2019-03-25 11:12:38 -06:00

cache.h

arch/: Unify the cache interface for all architectures

2019-03-19 10:37:13 -06:00

cancelpt.h

…

clock.h

Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly).

2019-03-20 19:27:40 -06:00

compiler.h

include/nuttx/compiler.h: Assume inline support if __STDC_VERSION__ not defined.

2019-03-19 10:07:52 -06:00

elf.h

Merged in antmerlino/nuttx/elf-cplusplus-guard (pull request #826)

2019-02-19 15:24:25 +00:00

environ.h

…

envpath.h

binfmt/ and libs/libc: Make exepath_*() more common:

2018-11-08 07:27:14 -06:00

init.h

Squashed commit of the following:

2019-02-04 16:20:35 -06:00

irq.h

include/nuttx/irq.h: Fix enter_critical_section/spin_lock_irqsave macro typo error and remove the duplicated inclusion of arch/irq.h

2019-01-27 11:21:03 -06:00

kmalloc.h

…

kthread.h

…

list.h

include/nuttx/list.h: Fix some typos.

2019-01-29 07:37:22 -06:00

mmcsd.h

…

module.h

…

mqueue.h

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

mutex.h

…

nuttx.h

…

page.h

…

pgalloc.h

…

poff.h

…

progmem.h

…

pthread.h

…

random.h

…

sched_note.h

…

sched.h

More ZNeo compile fixes: include/stdio.h: Another place where misuse of FAR makes a difference. include/nuttx/sched.h: Be consistent in use of WDOG_ID type. ZDS-II doesn't like auto-conversions of struct wdog_s * to WDOG_I (which is type struct wdog_s *).

2019-06-03 13:28:39 -06:00

scsi.h

…

sdio.h

This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache().

2018-11-20 14:03:42 -06:00

semaphore.h

…

signal.h

Fix several ZNeo compile issues. There are more. Pthreads: Fix a could of places where FAR was added when it is not appropriate. This matters to ZNeo which depends on definitions of NEAR and FAR points.

2019-06-03 13:06:58 -06:00

spawn.h

…

spinlock.h

Squashed commit of the following:

2019-03-04 14:22:50 -06:00

streams.h

Restore lib_sprintf(). It was removed because I thought was not used. But I was wrong; there is logic in drivers/syslog that depends on lib_sprintf().

2019-02-16 12:29:00 -06:00

symtab.h

arch/arm/src/samd2l2 serial: Fix SAMD2L2 serial driver it needs sam_usart_enable() to work

2019-01-26 12:51:51 -06:00

time.h

…

tls.h

…

tree.h

…

userspace.h

Squashed commit of the following:

2019-04-29 14:52:05 -06:00

vt100.h

…

wdog.h

…

wqueue.h

This commit implements a proper version of SO_LINGER. Not sufficiently tested on initial commit.

2019-07-01 12:25:32 -06:00

zoneinfo.h

…