| .. |
|
chip
|
SAMV7: Add PIO register definition header file
|
2015-03-08 17:34:26 -06:00 |
|
chip.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
Kconfig
|
SAMV7 Kconfig: Add peripheral selections
|
2015-03-05 13:51:39 -06:00 |
|
Make.defs
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
sam3u_gpio.h
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
sam3u_periphclks.h
|
Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips
|
2014-02-22 10:38:25 -06:00 |
|
sam3x_gpio.h
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
sam3x_periphclks.h
|
SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte
|
2014-09-08 06:14:59 -06:00 |
|
sam4cm_freerun.c
|
SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov.
|
2015-02-25 08:12:31 -06:00 |
|
sam4cm_freerun.h
|
SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov.
|
2015-02-25 08:12:31 -06:00 |
|
sam4cm_gpio.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4cm_oneshot.c
|
SAM4CM: Add support for tickless operation
|
2015-02-03 07:00:54 -06:00 |
|
sam4cm_oneshot.h
|
SAM4CM: Add support for tickless operation
|
2015-02-03 07:00:54 -06:00 |
|
sam4cm_periphclks.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4cm_supc.c
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4cm_supc.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4cm_tc.c
|
SAM4CM: Add support for tickless operation
|
2015-02-03 07:00:54 -06:00 |
|
sam4cm_tc.h
|
SAM4CM: Add support for tickless operation
|
2015-02-03 07:00:54 -06:00 |
|
sam4cm_tickless.c
|
Fix a compilation error. From Macs Neklyudov
|
2015-02-16 14:30:15 -06:00 |
|
sam4e_gpio.h
|
SAM4E: Pin multiplex definition header file
|
2014-02-21 18:10:53 -06:00 |
|
sam4e_periphclks.h
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
sam4l_clockconfig.c
|
Add support for the SAM4L Xplained Pro I/O1 module
|
2013-06-15 10:56:08 -06:00 |
|
sam4l_gpio.c
|
Fixes for more issues found by cppcheck
|
2014-11-24 17:00:26 -06:00 |
|
sam4l_gpio.h
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam4l_periphclks.c
|
Fix typo cloned to many files: SAM32 vs SAM34
|
2014-02-12 13:00:24 -06:00 |
|
sam4l_periphclks.h
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
|
sam4s_gpio.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam4s_periphclks.h
|
SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S
|
2014-11-16 06:43:08 -06:00 |
|
sam_aes.c
|
Move crypto header files from include/crypto to include/nuttx/crypto
|
2014-07-03 18:35:08 -06:00 |
|
sam_aes.h
|
Correct authorship on a few files
|
2014-07-03 18:28:26 -06:00 |
|
sam_allocateheap.c
|
SAMV71-XULT: Add heap allocation logic
|
2015-03-07 11:46:54 -06:00 |
|
sam_clockconfig.c
|
SAMV71: Add Supply Controller register definition header file
|
2015-03-06 15:27:51 -06:00 |
|
sam_clockconfig.h
|
Move SAM4L peripheral clock logic to a separate file
|
2013-06-05 18:48:30 -06:00 |
|
sam_cmcc.c
|
SAM4E CMCC: Fix some errors introducted in last check-in
|
2014-03-26 16:32:16 -06:00 |
|
sam_cmcc.h
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
sam_dmac.c
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
sam_dmac.h
|
SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts
|
2014-03-14 11:57:42 -06:00 |
|
sam_emac.c
|
SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing.
|
2015-02-10 11:10:55 -06:00 |
|
sam_emac.h
|
SAM4E-EK: Add support for PHY insterrupt
|
2014-10-24 12:28:57 -06:00 |
|
sam_gpio.c
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam_gpio.h
|
SAM3/4: Fix conditional compilation in GPIO IRQ logic
|
2014-10-24 10:44:43 -06:00 |
|
sam_gpioirq.c
|
Another fix to SAM3/4 GPIO IRQ issue
|
2014-10-24 10:55:52 -06:00 |
|
sam_hsmci.c
|
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
|
2014-08-21 11:16:55 -06:00 |
|
sam_hsmci.h
|
Rename sam3u/ architecture directories to sam34/ to include the SAM4L
|
2013-06-02 13:57:22 -06:00 |
|
sam_irq.c
|
SAMV7: Add interrupt-related logic
|
2015-03-07 11:16:44 -06:00 |
|
sam_lowputc.c
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam_lowputc.h
|
Rename sam3u/ architecture directories to sam34/ to include the SAM4L
|
2013-06-02 13:57:22 -06:00 |
|
sam_mpuinit.c
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_mpuinit.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_periphclks.h
|
Add support for the SAM4CM. From Max Neklyudov
|
2014-06-25 08:25:52 -06:00 |
|
sam_rtc.c
|
RTC: Remove all backdoor interfaces from rtc.h
|
2015-02-13 08:41:34 -06:00 |
|
sam_rtc.h
|
RTC: Remove all backdoor interfaces from rtc.h
|
2015-02-13 08:41:34 -06:00 |
|
sam_rtt.c
|
Eliminate some warnings
|
2015-02-25 08:05:35 -06:00 |
|
sam_rtt.h
|
Add SAM3/4 RTT driver. From Bob Doiron
|
2014-05-05 14:35:37 -06:00 |
|
sam_serial.c
|
Bringing PPPD yet closer to the NuttX coding style
|
2015-03-11 18:47:04 -06:00 |
|
sam_spi.c
|
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
|
2014-08-21 11:16:55 -06:00 |
|
sam_spi.h
|
Include chip/sam_spi.h in sam_spi.h
|
2015-03-20 11:09:36 -06:00 |
|
sam_start.c
|
Add new common lazy FPU state saving option for ARMv7-M. Not yet verified
|
2015-03-06 08:26:43 -06:00 |
|
sam_tc.c
|
Eliminate some warnings
|
2015-02-25 08:05:35 -06:00 |
|
sam_tc.h
|
Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)
|
2014-04-22 13:42:38 -06:00 |
|
sam_timerisr.c
|
SAMV71: Add PMC register definition header files
|
2015-03-06 14:58:13 -06:00 |
|
sam_udp.c
|
Rename kmalloc to kmm_malloc for consistency
|
2014-08-31 17:26:36 -06:00 |
|
sam_udp.h
|
Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments
|
2015-03-05 06:41:14 -06:00 |
|
sam_userspace.c
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_userspace.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_vectors.S
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
sam_wdt.c
|
Eliminate some warnings
|
2015-02-25 08:05:35 -06:00 |
|
sam_wdt.h
|
Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)
|
2014-04-22 13:42:38 -06:00 |
