nuttx/include/nuttx
2019-06-29 06:26:49 -06:00
..
1wire
analog Squashed commit of the following: 2019-05-21 18:57:54 -06:00
audio Fixes warnings from header files: 2018-11-09 09:10:28 -06:00
binfmt binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes. 2019-01-26 11:34:40 -06:00
can Squashed commit of the following: 2019-05-21 18:57:54 -06:00
contactless Merged in raiden00/nuttx_l0f0 (pull request #848) 2019-04-05 15:49:45 +00:00
crypto This change: 2018-12-19 08:42:48 -06:00
drivers Merged in raiden00/nuttx_pe (pull request #779) 2018-12-09 16:31:57 +00:00
eeprom drivers/eeprom/i2c_xx24xx.c and include/nuttx/eeprom/i2c_xx24xx.h: Add support to Microchip AT24CM02 2018-12-30 11:20:03 -06:00
fs Squashed commit of the following: 2019-05-21 18:57:54 -06:00
i2c include/nuttx/i2c/i2c_master.h: Fix a small typo. 2018-12-07 18:53:57 -06:00
input Squashed commit of the following: 2019-05-21 18:57:54 -06:00
ioexpander sched/signal and related changes to other OS subsystems. 2019-01-27 09:28:59 -06:00
lcd Squashed commit of the following: 2019-04-29 14:52:05 -06:00
leds
lib Re-verify ez80 build. Fixes to other ZiLOG architectures broke ez80 again. 2019-06-03 19:04:24 -06:00
mm mm/iob/iob_notifier.c: Don't check iob_navail in iob_notifier_setup to avoid a potential race condition. 2019-01-26 09:43:54 -06:00
modem
mtd Extends the MTD configdata device with the following features / additions: 2018-12-20 14:14:40 -06:00
net include/nuttx/net/bluetooth.h: Ignore content if CONFIG_NET_BLUETOOTH is not set. This is necessary because bt_hci.h content was previously comment out because it uses several compiler specific things include zero-dimensione arrays and uint64_t. Neither are supported by the C89 ZiLOG ZDS-II compiler. 2019-06-02 12:57:18 -06:00
nx graphics/nxterm: Add a new IOCTL that can be used to inform NxTerm that the size of a window has changed. 2019-05-16 13:12:24 -06:00
power drivers/power/pm_activity.c: Add pm_staycount API for get stay numbers. This function is currently not used and a waste of FLASH space. 2019-01-27 11:19:26 -06:00
sensors drivers/sensors/vl53l1x.c: Remove the VL53L1x driver. It does not compile. 2019-06-29 06:26:49 -06:00
serial Squashed commit of the following: 2019-05-21 18:57:54 -06:00
spi configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile. 2019-06-16 14:45:38 -06:00
syslog arch/arm/src/common/up_initialize.c: up_initialize.c needs to know about ramlog_consoleinit() 2019-05-04 18:28:43 -06:00
timers configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile. 2019-06-16 14:45:38 -06:00
usb drivers/usbmisc/fusb303.c: Toggle enable bit off/on after detaching 2019-05-31 07:40:06 -06:00
video Abandon attempt to get common data structures for NX and the raw framebuffer cursor interface. This backs out several changes. 2019-04-07 18:00:40 -06:00
wireless Merged in masayuki2009/nuttx.nuttx/add_wireless_gs2200m (pull request #908) 2019-06-18 12:44:03 +00:00
.gitignore
addrenv.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
arch.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
ascii.h
board.h arch/ and config/ files: All board interfaces (those starting with board_) must be defined in board-specific logic. Otherwise, they cannot be customized of specialized usage by different boards. The board_reset() interface was defined in architecture-specific logic that only called up_systemreset(). That is useless! 2019-03-25 11:12:38 -06:00
cache.h arch/: Unify the cache interface for all architectures 2019-03-19 10:37:13 -06:00
cancelpt.h
clock.h Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly). 2019-03-20 19:27:40 -06:00
compiler.h include/nuttx/compiler.h: Assume inline support if __STDC_VERSION__ not defined. 2019-03-19 10:07:52 -06:00
elf.h Merged in antmerlino/nuttx/elf-cplusplus-guard (pull request #826) 2019-02-19 15:24:25 +00:00
environ.h
envpath.h binfmt/ and libs/libc: Make exepath_*() more common: 2018-11-08 07:27:14 -06:00
init.h Squashed commit of the following: 2019-02-04 16:20:35 -06:00
irq.h include/nuttx/irq.h: Fix enter_critical_section/spin_lock_irqsave macro typo error and remove the duplicated inclusion of arch/irq.h 2019-01-27 11:21:03 -06:00
kmalloc.h
kthread.h
list.h include/nuttx/list.h: Fix some typos. 2019-01-29 07:37:22 -06:00
mmcsd.h
module.h
mqueue.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
mutex.h
nuttx.h
page.h
pgalloc.h
poff.h
progmem.h Merged in ebsong/nuttx (pull request #722) 2018-09-21 03:18:38 +00:00
pthread.h
random.h
sched_note.h
sched.h More ZNeo compile fixes: include/stdio.h: Another place where misuse of FAR makes a difference. include/nuttx/sched.h: Be consistent in use of WDOG_ID type. ZDS-II doesn't like auto-conversions of struct wdog_s * to WDOG_I (which is type struct wdog_s *). 2019-06-03 13:28:39 -06:00
scsi.h
sdio.h This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache(). 2018-11-20 14:03:42 -06:00
semaphore.h include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface. 2018-09-26 06:58:08 -06:00
signal.h Fix several ZNeo compile issues. There are more. Pthreads: Fix a could of places where FAR was added when it is not appropriate. This matters to ZNeo which depends on definitions of NEAR and FAR points. 2019-06-03 13:06:58 -06:00
spawn.h
spinlock.h Squashed commit of the following: 2019-03-04 14:22:50 -06:00
streams.h Restore lib_sprintf(). It was removed because I thought was not used. But I was wrong; there is logic in drivers/syslog that depends on lib_sprintf(). 2019-02-16 12:29:00 -06:00
symtab.h arch/arm/src/samd2l2 serial: Fix SAMD2L2 serial driver it needs sam_usart_enable() to work 2019-01-26 12:51:51 -06:00
time.h
tls.h
tree.h
userspace.h Squashed commit of the following: 2019-04-29 14:52:05 -06:00
vt100.h
wdog.h
wqueue.h include/nuttx/wqueue.h: Allow definitions even if work queues are not enabled. This solves build failures when work queues are not enabled. 2019-06-03 13:13:17 -06:00
zoneinfo.h