Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
a70ea9d3bc
Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev.
2017-01-30 07:26:38 -06:00
Alan Carvalho de Assis
c482437325
MMCSD_SDIO: Only wait for card ejected if card detection is supported
2017-01-26 07:44:17 -06:00
Gregory Nutt
ba2b345990
Remove a few remaining use of the obsolteted 'Compilation Switches' program section
2017-01-22 08:57:18 -06:00
Gregory Nutt
5e0c18b535
Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198 )
...
Adding missing CONFIG_ prefix
2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b
Adding missing CONFIG_ prefix
2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b
drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered.
2017-01-15 13:00:50 -06:00
Gregory Nutt
2d9668fbd2
Fix a typo in a comment
2017-01-12 16:24:41 -06:00
Aleksandr Vyhovanec
bf528f2071
packed_struct replaced by begin_packed_struct and end_packed_struct
2017-01-09 14:17:49 +03:00
David Sidrane
548108764a
BugFix:uart_ops_s portion of cdcacm will not be initalized with correct functions if CONFIG_SERIAL_DMA is lit.
...
This fixes the issses in a C99 compatible way
2016-12-17 04:29:41 -10:00
Gregory Nutt
4795d58e03
Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers.
2016-12-15 07:16:24 -06:00
Gregory Nutt
ca92ecafa7
MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine.
2016-12-14 17:44:12 -06:00
Gregory Nutt
f4f32bc740
MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines.
2016-12-14 17:04:27 -06:00
Alan Carvalho de Assis
3c4a8d05b0
MMC/SD SDIO driver: Change the endianess order to read the return of long response command
2016-12-14 14:17:52 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gong Darcy
44b7975a5e
SSD1306: Fix errors in SPI mode configuration
2016-12-04 10:07:46 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
ad3897531f
C5471 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 12:17:55 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
eba1e076ec
PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT
2016-12-03 09:50:14 -06:00
Gregory Nutt
bfa1da14e2
LM3S Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 08:32:49 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Janne Rosberg
8442bf66b9
usbhost_cdcacm: add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to supported class and proto
2016-11-30 12:20:23 -06:00
Janne Rosberg
4b282f219a
usbhost_composite: fix end offset in usbhost_copyinterface()
2016-11-30 12:18:23 -06:00
Gregory Nutt
96be43b270
drivers/net/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:44:23 -06:00
Gregory Nutt
1793c1f8e1
Trivial, cosmetic change
2016-11-29 15:03:51 -06:00
Gregory Nutt
9ee3f3b933
sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled.
2016-11-28 18:36:26 -06:00
Gregory Nutt
d65be718c2
sched_note: Extend OS instrumentation to include some SMP events.
2016-11-27 17:14:57 -06:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Wolfgang Reißnegger
88539a7497
USBMSC: Fix length of mode6 sense reply packet.
2016-11-18 17:23:21 -08:00
Gregory Nutt
cdbc66addd
Merge branch 'master' of bitbucket.org:nuttx/nuttx
2016-11-18 09:30:40 -06:00
Gregory Nutt
936b55f608
drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers.
2016-11-18 09:22:49 -06:00
Gregory Nutt
175ec43628
Merged in slorquet/nuttx/timerfixes (pull request #171 )
...
Timerfixes
2016-11-18 14:45:36 +00:00
Gregory Nutt
52560bba37
ENC28J60: Allow either HP or LP work queue to be used.
2016-11-18 08:41:27 -06:00
Sebastien Lorquet
5363d0619a
Fix warnings
2016-11-18 15:26:08 +01:00
Gregory Nutt
47b52a2633
Fix an error in manually bringing in Sebastien's changes; Update some comments.
2016-11-17 16:15:06 -06:00
Gregory Nutt
9acd57c819
Fix up some naming and update some comments.
2016-11-17 15:50:39 -06:00
Gregory Nutt
19c1c9d78b
All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems.
2016-11-17 15:03:31 -06:00
Sebastien Lorquet
197cec58d2
timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage.
2016-11-17 14:38:21 -06:00
Gregory Nutt
d4a048c0c6
Timer driver: Add hooks to support signal notification of timer expiration. Commented out because invasive interface changes would also be required to complete the implementation.
2016-11-17 12:41:11 -06:00
Gregory Nutt
ecb2d4cbc1
drivers/timer: Remove the TIOC_SETHANDLER IOCTL call. This calls directly from the timer driver into application code. That is non-standard, non-portable, and cannot be supported
2016-11-17 11:52:42 -06:00
Alan Carvalho de Assis
a6b7730f8c
Add Vishay VEML6070 driver and support for STM32F103-Minimum board
2016-11-13 11:44:28 -06:00
Marc Rechté
58c2cd2843
drivers/ioexpander: Add some debug output.
2016-11-08 07:46:25 -06:00
Gregory Nutt
b0dffdc2ca
Fix a number of header files with mismatched 'extern C {' and '}'
2016-11-05 07:25:05 -06:00
Gregory Nutt
6ff6cca1a0
Fix some mispellings of semaphore
2016-11-03 17:48:36 -06:00
Gregory Nutt
4fcbe8e410
drivers: Disable priority inheritance on all semaphores used for signaling
2016-11-03 11:00:47 -06:00
Gregory Nutt
47b043df1e
drivers/serial.c: Make sure that priority inheritance is not enabled for the signaling semaphores used in the serial driver.
2016-11-03 08:16:59 -06:00
Paul A. Patience
d89765e1d0
spi: Fix Kconfig warning
...
This commit moves the ARCH_HAVE_SPI options outside the check
for SPI. Those options don't depend on SPI, and Kconfig files
in arch/ enable them even if SPI isn't enabled.
Sourcing the driver's Kconfig in drivers/Kconfig only if
support for the driver is enabled prevents us from defining
these ARCH_HAVE options in the driver's Kconfig. We should
probably remove the other checks in drivers/Kconfig and check
if the drivers are enabled only in their Kconfig.
2016-11-02 13:16:12 -04:00
Gregory Nutt
8dd2494407
Review of last PR: Fix return value (ERROR is not a value return value in this context). Fix some spacing.
2016-11-01 15:13:09 -06:00
Aleksandr Vyhovanec
be1626ad7b
Added EEPROM timeout
2016-11-02 00:03:16 +03:00
Gregory Nutt
de6db52b52
Oops... Last commit had some garbage in the file
2016-10-24 15:36:11 -06:00
Gregory Nutt
3d4ce55ebd
Oops.. a couple of hunks failed in the last patch. Hope I got them fixed correctly.
2016-10-24 15:25:40 -06:00
Max Nekludov
146d7e7921
drivers/net/tun.c: Fix bug in TUN interface driver
2016-10-24 15:17:01 -06:00
Max Kriegleder
77e5115e23
syslog: Fixes required for file syslog output
2016-10-19 08:27:20 -06:00
Janne Rosberg
847d2b4218
usbhost/composite: fix compile; missing semicolons
2016-10-18 11:52:23 -06:00
Janne Rosberg
72f13db4bf
usbhost/enumerate: fix possible buffer overwrite
2016-10-18 08:15:19 -06:00
Gregory Nutt
6a0917ae7f
Eliminate warnings
2016-10-06 07:44:17 -06:00
Gregory Nutt
2da3da7fd6
Costmetic changes from review of last commit
2016-09-25 17:24:39 -06:00
Gregory Nutt
0908a6c6b9
Fix calculations using MSEC_PER_TICK. If USEC_PER_TICK is less than 1000, then MSEC_PER_TICK will be zero. It will be inaccurate in any case.
2016-09-25 08:17:33 -06:00
Alan Carvalho de Assis
61980caee5
drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project.
2016-09-16 12:45:53 -06:00
Gregory Nutt
de3e35f00a
include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique
2016-09-16 09:39:51 -06:00
Aleksandr Vyhovanec
b0f973d901
MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F.
2016-09-02 11:00:04 -06:00
Aleksandr Vyhovanec
3f40541b21
MTD: Fixed cloned typos in several FLASH drivers.
2016-09-02 07:27:57 -06:00
Gregory Nutt
7f6a403b96
USB host composite is at least partially functional. No longer depends on CONFIG_EXPERIMENTAL
2016-09-02 07:26:29 -06:00
Gregory Nutt
e958c32e4d
USB host composite: Using wrong interface number from interface descriptor.
2016-08-31 13:29:38 -06:00
Gregory Nutt
ebe829c4b9
USB host composite: A test should be <= not just <
2016-08-31 13:24:38 -06:00
Gregory Nutt
7ea9632592
Change the way that contactless IOCTL commands are defined. All IOCTL commands must be unique.
2016-08-31 11:30:22 -06:00
Gregory Nutt
4b0e8e56cf
Add contactless/ directory to Documentation
2016-08-31 10:58:08 -06:00
Gregory Nutt
7b75a32ca1
Improve some comments
2016-08-31 08:16:12 -06:00
Gregory Nutt
cb7c1c1f14
USB host composite: Add an option to permit support only a subset of the composite intefaces.
2016-08-31 07:56:27 -06:00
Sebastien Lorquet
1d1affdd2b
fix mfrc522
2016-08-31 13:46:27 +02:00
Sebastien Lorquet
d4048f3eeb
CL fixes
2016-08-31 13:41:49 +02:00
Sebastien Lorquet
90568f9e8f
Add CL make.defs
2016-08-31 13:25:21 +02:00
Sebastien Lorquet
e5ba71caf8
add cl kconfig
2016-08-31 13:24:19 +02:00
Sebastien Lorquet
3bf11c7203
Add contactless drivers, with renames
2016-08-31 13:20:53 +02:00
Sebastien Lorquet
3654b841bc
Move contactless drivers to their own directory
2016-08-31 13:08:58 +02:00
Gregory Nutt
aa0d1868f5
USB host composite: Fix places where the wrong pointer was used; Add a test for an error condition.
2016-08-30 13:58:01 -06:00
Gregory Nutt
ac623abc7d
USB host composite: Reosolves last remaining REVISIT design issues. Compiles clean with no errors and warning and is fully ready for testing.
2016-08-30 10:52:41 -06:00
Gregory Nutt
ee83e49f75
Update a comment
2016-08-29 15:43:11 -06:00
Gregory Nutt
1ce4db8008
USB host composite: Save some information that will be needed to create a class-specific configuration.
2016-08-29 15:02:15 -06:00
Gregory Nutt
f4f807100b
Update comment
2016-08-29 14:55:03 -06:00
Alpo Leinonen
7d5173ca09
USB host composite: Several syntactic errors fixed
2016-08-29 07:53:57 -06:00
Gregory Nutt
43abb7cb3a
Mark USB host compsite feature EXPERMENTAL; update ChangeLog
2016-08-28 14:51:55 -06:00
Gregory Nutt
31c364457a
CLASS_CONNECT needs to be called for each member of the composite.
2016-08-28 08:48:40 -06:00
Gregory Nutt
58b45d64d7
Fix composite connect method.
2016-08-28 08:33:38 -06:00
Gregory Nutt
5d4428be93
Add check of class ID in device scriptor header
2016-08-27 10:53:43 -06:00
Gregory Nutt
c973e0d3ba
Add the logic necessary to abstract the register lookup information for each candiate class
2016-08-27 10:31:18 -06:00
Gregory Nutt
2460d41ae0
Add more logic to the USB host composite wrapper.
2016-08-26 17:03:16 -06:00
Gregory Nutt
0860621e60
Fill one more case of 'Missing logic' in the USB host composite wrapper.
2016-08-26 12:34:58 -06:00
Gregory Nutt
3c0b287fe9
Fill in a little of the 'Missing logic' in the USB host composite wrapper.
2016-08-26 12:24:35 -06:00
Gregory Nutt
ea8ce7acb6
Trivial rename
2016-08-26 11:05:50 -06:00
Gregory Nutt
a228b0cc36
Add a little more meat to the still very USB host composite skeleton. Not quite so boney now.
2016-08-26 10:33:41 -06:00
Gregory Nutt
fa4e9e3c1c
Add a little more meat to the still very bony USB host composite skeleton.
2016-08-26 10:13:35 -06:00
Gregory Nutt
579e338cd3
Add a little more meat to the USB host composite skeleton. Still pretty bony.
2016-08-26 09:47:38 -06:00
Gregory Nutt
8a1d6c9ed8
Basic framework that might be used to add USB host support
2016-08-26 09:07:52 -06:00
Gregory Nutt
c51b642f81
Fix some driver return values. If sem_wait fails, the errcode is in errno, not the return value.
2016-08-25 07:15:59 -06:00
Alexander Entinger
221fcfd8f1
drivers/sensors: Add driver for the Bosch BMG160 3 axis gyroscop.
2016-08-24 09:41:04 -06:00
Alexander Entinger
0044910e33
drivers/sensors: Add driver for the LIS3DSH 3 axis accelerometer.
2016-08-24 08:28:45 -06:00
Beat Küng
dd1f679891
mtd: Add Fujistu MB85RS256B ramtron support
...
contributed by flatlevel from https://github.com/PX4/NuttX/pull/79
2016-08-23 18:27:04 +00:00
Entinger Alexander
b29287b022
drivers/sensors: Add driver for the MLX90393 3 axis magnetometer.
2016-08-23 10:48:08 -06:00
Entinger Alexander
338bf8c9e3
drivers/sensors: Add drvier for the LIS3MDL 3 axis magnetometer
2016-08-23 08:22:47 -06:00
Gregory Nutt
60b70f7dbb
Make xorshift128 re-entrant so that we do do have to suffer the overhad of serialization controls.
2016-08-21 07:47:53 -06:00
Gregory Nutt
6f833be9d5
Separate XorShift128 PRNG from /dev/urandom and make it generally available.
2016-08-20 11:36:02 -06:00
Gregory Nutt
cbebd9c99b
Lower case hex
2016-08-17 17:32:53 -06:00
Alan Carvalho de Assis
d3a5bd4ba0
drivers/audio/tonic.: Remove dependency on LIBM for creating a static table with frequencies notes.
2016-08-17 16:41:00 -06:00
Alan Carvalho de Assis
229a200734
Add NULL termination to tune string and fix missing break
2016-08-17 16:34:49 -06:00
Alan Carvalho de Assis
8b99dd4cdb
drivers/audio: Add Audio Tone Generator for NuttX
2016-08-16 13:20:05 -06:00
Piotr Mienkowski
053aea552f
Add support for SAMV7 DACC module
2016-08-15 08:00:36 -06:00
Gregory Nutt
32ebeb15b4
Trivial changes from review of PR 115
2016-08-14 13:47:07 -06:00
Gregory Nutt
ade02a513b
Merged in v01d/nuttx/ssd1306-128 (pull request #115 )
2016-08-14 13:42:24 -06:00
v01d
943c853939
semantic changes
2016-08-14 16:23:13 -03:00
v01d
02a7fd2430
Make OLED 132x64 use 128x64 for the time being
2016-08-14 14:54:58 -03:00
Gregory Nutt
4b582f0ae9
Fix some comments
2016-08-14 07:16:18 -06:00
Gregory Nutt
e963e8d879
Changes from review of PR 112
2016-08-13 16:53:23 -06:00
Gregory Nutt
72a2fed1d0
Merged in v01d/nuttx/ssd1306_fixes (pull request #112 )
...
SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes
2016-08-13 16:33:28 -06:00
v01d
21e930cdba
SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes
2016-08-13 19:20:20 -03:00
Gregory Nutt
ab16ad7530
Fix some bugs in the oneshot driver logic
2016-08-12 14:19:11 -06:00
Gregory Nutt
82b86cdcf3
oneshot interface: max_delay method should return time in a standard struct timespec form.
2016-08-12 11:33:10 -06:00
Gregory Nutt
89135c55e4
drivers/timer: Add an upper-half, oneshot timer character driver.
2016-08-12 10:40:07 -06:00
Gregory Nutt
caea59b340
SPI bit order: Add configuration setting to indicate if an architecture-specif SPI implementation does or does not support LSB bit order.
2016-08-08 12:21:20 -06:00
Gregory Nutt
6df28bc74e
Make bit-order SPI H/W feature configurable for better error detection
2016-08-08 11:54:13 -06:00
Gregory Nutt
21859af6d9
Add check of return value in drivers affected by last change: Report the error on a failure to set the bit order.
2016-08-08 08:40:37 -06:00
Gregory Nutt
7d4cb73bd6
STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers.
...
This change three things: (1) It adds HWFEAT_LSBFIRST as a new H/W feature. (2) It changes the implementations of SPI_SETBITS in the STM32 and EFM32 derivers so that negated bit numbers are simply errors and it adds the SPI_HWFEATURES method that can set the LSB bit order, and (3) It changes all calls with negative number of bits from all drivers: The number of bits is now always positive and SPI_HWFEATUREs is called with HWFEAT_LSBFIRST to set the bit order.
2016-08-08 08:28:13 -06:00
Gregory Nutt
9965cbe428
drivers/: Review and correct some stylistic inconsistencies
2016-08-07 09:43:48 -06:00
Alan Carvalho de Assis
10a7698112
drivers/wireless/mfrc522.c: Fix memory free command
2016-08-07 07:34:01 -06:00
Alan Carvalho de Assis
bfac90f720
Add MFRC522 RFID ISO14443 and Mifare transceiver driver
2016-08-06 08:45:52 -06:00
Gregory Nutt
83c7b4d5d6
SPI driver: Correct return value in case of a certain error condition
2016-08-06 08:07:30 -06:00
Gregory Nutt
50e9a5fa33
Add more options to spi_transfer
2016-08-05 13:22:18 -06:00
Gregory Nutt
5407a673fc
Tiva TM4C-1294 Launchpad: tiva_appinit.c is a better home for board_pwm_setup() vs. tiva_bringup.c
2016-08-05 13:05:41 -06:00
Gregory Nutt
7048d08123
drivers/spi: Add an SPI character driver that will permit access to the SPI bus for testing purposes. This driver is a simple wrapper around spi_transfer().
2016-08-05 11:07:35 -06:00
Gregory Nutt
7da67bc80a
drivers/spi: Add a helper function that encapsulates and manages a sequency of SPI transfers.
2016-08-05 10:23:04 -06:00
Gregory Nutt
3d5df2e5af
Extend I/O Expander interrupt controls; Add test of level sensitve interrupt to Simulated I/O expander
2016-08-04 16:19:52 -06:00
Gregory Nutt
1f9799b68d
I/O Expanders: Interrupt detection logic should not ignore the no-change case. Still need to handle level interrupts even with no change.
2016-08-03 13:10:20 -06:00
Gregory Nutt
803b540e8a
Fix various issues with I/O expander and GPIO lower half drivers from testing with simulated I/O expander
2016-08-03 12:46:54 -06:00
Gregory Nutt
778a8131bf
SIM: Add a simulated I/O Expander driver
2016-08-03 09:44:48 -06:00
Gregory Nutt
7ba445868c
KXJT9: In read(), return multiple samples if the user-provided buffer will hold multiple samples.
2016-08-02 17:32:47 -06:00
Gregory Nutt
30229c217b
Cosmetic changes
2016-08-02 10:46:19 -06:00
Gregory Nutt
c32d40fd7d
KXJT9 Accelerometer driver from the Motorola Moto Z MDK
2016-08-02 10:38:14 -06:00
Gregory Nutt
62bc64bc55
Back out last Makefile.unix change. After puzzling about this for a while, I moved the definitions to apps/Make.defs. Also includes some cosmetic changes to GPIO lower half driver comments.
2016-08-02 08:37:30 -06:00
Gregory Nutt
9685fd8c99
GPIO driver: Add an IOCTL to unregister a signal handler
2016-08-01 13:52:27 -06:00
Gregory Nutt
0f9fb09a53
GPIO driver: Add an IOCTL command to get the pin type
2016-08-01 12:09:00 -06:00
Gregory Nutt
d0f6a23a32
Ooops.. forgot to add files before last commit
2016-08-01 11:15:29 -06:00
Gregory Nutt
d47aa75669
Add PCF8574 I/O Expander driver. Some cleanup also of other expander drivers.
2016-08-01 11:10:11 -06:00
Gregory Nutt
e0f3df5d97
Remove another lingering kruft
2016-08-01 10:01:28 -06:00
Gregory Nutt
583dad647c
TCA64xx: Remove some unused kruft
2016-08-01 09:59:36 -06:00
Gregory Nutt
9d9ff44736
GPIO lower half: Add conditional logic to handle the case where the I/O expander does not support interrupts.
2016-08-01 09:06:58 -06:00
Gregory Nutt
bf60f11801
Remove some unnecessary header file inclusions
2016-08-01 08:55:13 -06:00
Gregory Nutt
3e79ffc6dd
Some updates to the last commit
2016-08-01 08:49:15 -06:00
Gregory Nutt
6090f69bfd
Add a GPIO lower-half driver that can be used to register a GPIO character driver for accessing pins on an I/O expander.
2016-08-01 08:43:10 -06:00
Gregory Nutt
91b1006d42
I/O Expander Interface: Add argument to interrupt callback. Add a method to detach the interrupt.
2016-08-01 07:26:04 -06:00
Gregory Nutt
fb84e51d5b
Minor improvements/fixes to the TCA64xx driver.
2016-08-01 06:48:05 -06:00
Gregory Nutt
c0b83cb4b4
First (untested) cut at a TCA64XX I/O Expander driver leverages from Project Ara
2016-07-31 19:52:44 -06:00
Gregory Nutt
8fab9fb00f
Rethink last commit -- probably going down the wrong path
2016-07-31 18:33:04 -06:00
Gregory Nutt
8a67509b34
I/O Expander: Encode and extend I/O expander options to include interrupt configuration.
2016-07-31 18:19:59 -06:00
Gregory Nutt
9f00d87c07
Another update to the I/O Expander skeleton.c file
2016-07-31 17:03:25 -06:00
Gregory Nutt
bbe7a97685
Remove a duplicated line
2016-07-31 16:41:12 -06:00
Gregory Nutt
b98a966135
Another update to the I/O Expander skeleton.c file
2016-07-31 16:39:44 -06:00
Gregory Nutt
c6d65b0943
Update I/O Expander skeleton.c file
2016-07-31 15:43:36 -06:00
Gregory Nutt
99843fe5fe
I/O Expander: Update skelton file
2016-07-31 14:42:30 -06:00
Gregory Nutt
becf7e70c4
Add an I/O Expander skelton driver
2016-07-31 11:52:59 -06:00
Gregory Nutt
5f9ee79298
I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h definitons. Add support for an attach() method that may be used when any subset of pin interrupts occur.
...
PCA9555 Driver: Replace the signalling logic with a simple callback using the new definitons of ioexpander.h. This repartitioning of functionality is necessary because (1) the I/O expander driver is the lower-lower part of any driver that uses GPIOs (include the GPIO driver itself) and should not be interacting directly with the much higher level application layer. And (2) in order to be compatible with the GPIO driver (and any arbitrary upper half driver), the PCA9555 should not directly signal, but should call back into the upper half. The upper half driver that interacts directly with the application is the appropriate place to be generating signal.
2016-07-31 11:09:47 -06:00
Gregory Nutt
79c8bb7ddf
Updae more comments
2016-07-27 08:03:09 -06:00
Gregory Nutt
59e0c4411f
Correct some comments
2016-07-26 13:39:20 -06:00
Gregory Nutt
0c7f5d62e4
More comments
2016-07-26 12:13:30 -06:00
Gregory Nutt
084d200a66
PTY: Cosmetic, update some comments
2016-07-26 10:09:35 -06:00
Gregory Nutt
eaaa69da0a
serial.c: Fix an error in FIONWRITE calculation
2016-07-26 06:47:53 -06:00
Gregory Nutt
e0b4a10dfa
drivers/serial/pty.c, serial.c, usbdev/cdcacm.c, include/nuttx/fs/ioctl.h: Fix FIONWRITE and add FIONSPACE. All implementations of FIONWRITE were wrong. FIONWRITE should return the number of bytes waiting in the outgoing send queue, not the free space. Rather, FIONSPACE should return the free space in the send queue.
2016-07-25 14:06:32 -06:00
Gregory Nutt
eb94cc5419
Update some comments
2016-07-24 12:48:37 -06:00
Wolfgang Reissnegger
4f83d58b24
USBMSC: Fix reversed logic on waiting for SCSI thread start.
...
The scsi thread was waiting for the wrong condition.
However, this was masked by the fact that the code creating the scsi thread
was also holding usbmsc_scsi_lock(priv) while initializing data, hence this
lock synchronized the scsi thread start with init completion.
2016-07-23 20:11:00 -07:00
Wolfgang Reissnegger
2974d2b07e
USBMSC: Add locks when removing request from queue.
2016-07-23 20:10:41 -07:00
Wolfgang Reissnegger
81f7758848
USBMSC: Fix usbtrace() string.
2016-07-23 20:10:20 -07:00
Gregory Nutt
2d92bffdcc
Trivial change left in editor
2016-07-23 13:53:37 -06:00
Gregory Nutt
a932578e76
GPIO driver: Add support for receiving signals from interrupt pins.
2016-07-23 13:53:06 -06:00
Gregory Nutt
9a8c3572db
serial.c: Fix a race condition noted by Stefan Kolb. Between the test if the TX buffer is full and entering a critical section, bytes may be removed from the TX buffer making the wait unnecessary. The unnecessary wait is an inefficiency, but not really a problem. But with USB CDC/ACM it can be a problem because the entire TX buffer may be emptied when we lose the race. If that happens that uart_putxmitchar() can hang waiting for data to be removed from an empty TX buffer.
2016-07-22 07:47:59 -06:00
Gregory Nutt
7370d3171a
Move include/nuttx/lib.h to include/nuttx/lib/lib.h
2016-07-21 14:05:44 -06:00
Gregory Nutt
23a876ab9c
Move include/nuttx/math.h to include/nuttx/lib/math.h
2016-07-21 13:58:09 -06:00
Gregory Nutt
10fff9011a
Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h
2016-07-21 13:34:54 -06:00
Gregory Nutt
ee9c66186c
ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers.
2016-07-20 14:02:18 -06:00
Gregory Nutt
46dbbe837e
rwbuffer.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:54:38 -06:00
Gregory Nutt
1b9b3a7b47
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425
can.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
2016-07-20 13:15:37 -06:00
Gregory Nutt
e73e82a923
Move prototypes of mkfifo2() from sys/stat.h and pipe2() from unistd.h. They are non-standard and should not be in such a public place. They are not in include/nuttx/fs/fs.h (which isn't a great place either).
2016-07-20 11:57:18 -06:00
Gregory Nutt
2cacc6204a
Kconfig: If Pseudo-terminals are enabled, then pipes must be selected as well
2016-07-19 14:26:40 -06:00
Gregory Nutt
318f34fb7d
Psuedo-terminal pipe size is now configurable
2016-07-19 14:26:41 -06:00
Gregory Nutt
b28fa8a609
Move pipe() and mkpipe() to nuttx/libc. Change syscalls to pipe2() and mkfifo2()
2016-07-19 14:15:26 -06:00
Gregory Nutt
671d7fae31
Add mkfifo2() and pipe2() which are just like mkfifo() and pipe(), but allow control of the size of the underlying, in-memory circular buffer
2016-07-19 13:51:05 -06:00
Gregory Nutt
9a44f3017b
Fix a few typos in the last commit
2016-07-19 13:40:54 -06:00
Gregory Nutt
d6bf67f9ff
Alloc different sizes for pipe and fifo buffers
2016-07-19 13:34:18 -06:00
Gregory Nutt
56582e2263
Update some comments
2016-07-19 10:40:23 -06:00
Gregory Nutt
8bf4684de8
Update some comments
2016-07-19 09:53:52 -06:00
Gregory Nutt
a4458c5016
PTY: Fix a race condition in test-fifo-empty-before-read logic
2016-07-19 06:45:02 -06:00
Gregory Nutt
d9fbf4c90f
Eliminate some warnings
2016-07-18 11:27:06 -06:00
Gregory Nutt
1660329d06
Rename up_rnginitialize to devrandom_register
2016-07-18 10:55:37 -06:00
Gregory Nutt
6194467c13
PTY: Fix termios read input processing.. what was I thinking? Also, if some data was read, pty_read() should not block on the empty FIFO.
2016-07-18 08:00:56 -06:00
Gregory Nutt
e0aaa168aa
/dev/urandom: Add option to replace software PRNG with hardware TRNG.
2016-07-18 07:03:47 -06:00
Gregory Nutt
bf25eef79f
Update comments in Kconfig
2016-07-18 06:43:08 -06:00
Ken Pettit
39174da3be
Remove naming conflict in drivers/mtd/filemntd.c
2016-07-17 20:19:44 -06:00
Gregory Nutt
1b7455c171
Update comments in a Kconfig
2016-07-17 11:09:01 -06:00
