Commit Graph

38819 Commits

Author SHA1 Message Date
Matias N
1fa0aac36b nrf52: support configuring no console/serial 2020-10-30 19:58:26 -07:00
Nathan Hartman
4aa9b80d2b stm32 - Add register mappings for STM32G474 VREFBUF
arch/arm/src/stm32/hardware/stm32g47xxx_vrefbuf.h:

    * New file: Adds register definitions for the VREFBUF peripheral.
2020-10-30 19:57:54 -07:00
Yoshinori Sugino
106b140319 sched/signal/sig_default.c: Fix a comment 2020-10-30 19:57:06 -07:00
Yoshinori Sugino
834b74c786 sched/signal/sig_default.c: Fix a typo 2020-10-30 19:56:37 -07:00
Matias N
278e7af5e5 Add LCD character driver: allows interacting with LCD directly from userspace 2020-10-30 19:55:10 -07:00
Nathan Hartman
03e9f936d9 tiva/cc13x2_cc26x2: Fix syntax error
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_adi3_refsys.h:

    * Fix syntax error. The define ADI3_REFSYS_DCDCCTL0_VDDR_TRIM_MIN
      had an unintentional comment closing "*/" in the middle of its
      name.
2020-10-30 07:47:13 -07:00
Nathan Hartman
889353d102 tiva/cc13x2_cc26x2: Fix nxstyle errors
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_adi3_refsys.h:

    * Fix nxstyle errors.
2020-10-30 07:47:13 -07:00
Thomas Axelsson
9fb686aae0 syscall/syscall.csv: Increase number of arguments for prctl()
Handle PR_SET_NAME and PR_GET_NAME
2020-10-30 07:20:03 -07:00
Matias N
3f21d902bc sim: add LVGL configuration which uses the X11 framebuffer and mouse 2020-10-29 23:48:12 -07:00
Nathan Hartman
01fd55a0ac stm32/stm32_qencoder: Fix nxstyle errors
arch/arm/src/stm32/stm32_qencoder.c,
arch/arm/src/stm32/stm32_qencoder.h:

    * Fix nxstyle errors.
2020-10-29 23:50:36 -03:00
Matias N
4cbfbd0c74 nrf52_wdt: split into low-level API and watchdog driver lower-half
This separation allows to interact with the watchdog from OS code,
for example initiating the watchdog very early on boot. Moreover,
these changes make the lower-half driver support an already running
watchdog, which may happen if there's a bootloader which already
started it.
2020-10-29 20:17:33 -03:00
Bernd Walter
d6686b7409 s/BUSY/EBUSY typo fix, which ressulted in compile error 2020-10-30 07:19:34 +09:00
Matias N
99f56b89df nrf52832: add errata mitigation code for various RADIO issues 2020-10-29 10:38:42 -07:00
Juha Niskanen
cfa5b82e09 arch/arm/src/stm32l4/stm32l4_adc.c: fix copy-paste mistake with CONFIG_STM32L4_ADC1_DMA_CFG
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-29 06:32:00 -07:00
Xiang Xiao
e160bffe28 Remove all fclose with stdin, stdout and stderr
since it is wrong to close the builtin stream and specially note
https://pubs.opengroup.org/onlinepubs/9699919799/functions/fclose.html:

Since after the call to fclose() any use of stream results in
undefined behavior, fclose() should not be used on stdin, stdout,
or stderr except immediately before process termination (see XBD
Process Termination), so as to avoid triggering undefined behavior
in other standard interfaces that rely on these streams. If there
are any atexit() handlers registered by the application, such a
call to fclose() should not occur until the last handler is
finishing. Once fclose() has been used to close stdin, stdout, or
stderr, there is no standard way to reopen any of these streams.

and it is also unnecessary because the stream always get flushed.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-29 20:43:50 +09:00
Dong Heng
a12a79fdb3 xtensa/esp32: Fix SPI master DMA RX buffer memcpy size error 2020-10-29 11:51:05 +01:00
Yoshinori Sugino
51af06243f include/nuttx/serial/serial.h: Fix nxstyle errors 2020-10-29 01:12:43 -07:00
Yoshinori Sugino
c13f869432 Modify SIGSTP to SIGTSTP
Follow the POSIX description.
SIGTSTP should be sent when the Ctrl-Z characters is encountered, not SIGSTP.

Testing:
Built with hifive1-revb:nsh (CONFIG_SERIAL_TERMIOS=y, CONFIG_SIG_DEFAULT=y and CONFIG_TTY_SIGTSTP=y)
2020-10-29 01:12:43 -07:00
Xiang Xiao
96d1f018c4 build.yml: Switch avr-mips-riscv-x86-xtensa.dat to other.dat
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-29 01:06:57 -07:00
Brennan Ashton
e56a7146c2 build: Fix testbuild.sh artifact copy on macOS
xargs for macOS does not support the '-a/--file-arg' flag so
build artifacts were not getting stored.  This change passes it in
via stdin which is more portable.

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-10-29 00:14:19 -07:00
Yoshinori Sugino
13c0debec7 drivers/serial/Kconfig: Fix typos 2020-10-28 23:47:39 -07:00
Matias N
5c2750a960 fix typos 2020-10-28 22:02:09 -07:00
Matias N
52c3037b00 bt_conn.c: use definition names instead of hardcoded numbers 2020-10-28 22:02:09 -07:00
Matias N
e560eeae01 bt_hcicore.c: fix handling of advertising report; use correct advertising interval 2020-10-28 22:02:09 -07:00
Matias N
9833256406 bt_hci: add various definitions, better expose some fields 2020-10-28 22:02:09 -07:00
Matias N
db37d825ba bt_netdev.c: wrong placement of DEBUGASSERT (checks pointer before being set) 2020-10-28 22:02:09 -07:00
Juha Niskanen
d53abbc4ac drivers/lcd: ssd1306: cleanup to comments, README, nxstyle issues
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-28 19:28:30 -07:00
Juha Niskanen
bdb398fa8c drivers/lcd: ssd1306: fix one bad debug assert
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-28 19:28:30 -07:00
Juha Niskanen
75c332e008 include/nuttx/lcd/ssd1306.h: cleanup for non-existent configs, nxstyle
Correct typo LCD_SSD1306_SPI to CONFIG_LCD_SSD1306_SPI, remove
references to non-existent config variable names in comments.

Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-28 19:28:30 -07:00
Nathan Hartman
a3b37709ba tiva/cc13x2_cc26x2: Fix nxstyle errors
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_prcm.h:

    * Fix nxstyle errors.
2020-10-28 19:20:28 -07:00
Yoshinori Sugino
04c0055355 Fix typos 2020-10-28 19:15:04 -07:00
chao.an
a22f5bb8b0 net/tcp: fix nxstyle warning
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-10-28 11:41:16 -07:00
chao.an
d78bf36740 net/tcp: fix tcp socket close timeout if loss wireless connection
In the current net stack implementation, there is no mechanism
for notifying the loss of the wireless connection, if the network
is disconnected then application sends data packets through tcp,
the tcp_timer will keep retrying fetch the ack for awhile, the
connection status will not be able to be switched timely.

Change-Id: I84d1121527edafc6ee6ad56ba164838694e7e11c
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-10-28 11:41:16 -07:00
Masayuki Ishikawa
1e321ca032 drivers: wireless: Fix tcp/udp connect with heavy bulk data traffic in gs2200m.c
Summary:
- During network stress testing, ASSERT happened in gs2200m_ioctl_connect()
- The test was nxplayer (http audio streaming) and repeating wget every 0.5sec
- gs2200m_ioctl_connect() calls gs2200m_send_cmd() to send an AT command
- Then it waits for a synchronous command response.
- However, if heavy tcp traffic happens on another socket, it can receive a bulk packet
- With this commit, if it receives such a packet then the packet is duplicated.
- After that, the duplicated packet is added to the packet queue and notify the userland.

Impact:
- Affect almost all use cases with gs2200m

Testing:
- Tested with both spresense:wifi and spresense:wifi_smp
- Tested with nxplayer (http audio streaming) and repeat wget

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-10-28 11:36:17 -07:00
Brennan Ashton
162da1169e CI: Store artifacts durring build
Add new option -A is added to tools/testbuild.sh that will take the
created build executable and store it in a folder for the config
that generated it under $ARTIFACTDIR which can be set via an
environment variable or defaulted to $(TOPDIR)/buildartifacts

This is also helpful for local testing because you can now run
tools/testbuild.sh -A sim.dat and have all of the simulation
targets generated without having to rebuild along the way.

In the GitHub Actions workflow the artifacs are uploaded
two two bundles one for macOS and one for Linux

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-10-28 11:32:21 -07:00
chao.an
d0bde1114d sched/task: do not migrate the task state to INVALID
which still on used in task/nxmq_recover()

Change-Id: I31273aadd9e09c283cc3d0420dfc854ca8ae1899
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-10-28 11:15:22 -07:00
YAMAMOTO Takashi
ff3fa805a4 libxx: Use Kconfig "choice" to specify an implemenetation
It doesn't make sense to enable both of LIBCXX and UCLIBCXX.
This commit reflects it to Kconfig.
2020-10-28 14:10:30 -03:00
zhongan
c9dd19f4c9 sim:rpproxy/rpserver: force use 'CONFIG_SIM_M32' for 64bit system.
Change-Id: I3f240bd7761b42bddfb8c899dad63a0df5a6ac7f
Signed-off-by: zhongan <zhongan@xiaomi.com>
2020-10-28 10:08:47 -07:00
Juha Niskanen
8c464b0e7a sched: use nx_close instead of close
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-28 09:11:50 -07:00
Juha Niskanen
1577726f05 fs/inode/fs_fileopen.c: use nx_close instead of close
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-28 09:11:50 -07:00
Juha Niskanen
1115452061 drivers/pipes: nx_pipe syscall takes three params, also use nx_close on error path
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-28 09:11:05 -07:00
Alin Jerpelea
bc8ea75580 tools: cxd56: mkspk: automate mkspk build
the mkspk tool will automaticaly be built if CONFIG_CXD56_BINARY
is set.

Test:
nuttx.spk was succesfully generated

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-10-28 12:50:02 +01:00
Xiang Xiao
7901ad6959 tools/testbuild.sh: Support regular expression in blacklist
and prepend 'uname -s' to config for filtering config by host

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-28 00:18:03 -07:00
Yoshinori Sugino
079737dd0c libs/libc/signal/sig_pause.c: Fix a comment 2020-10-28 07:12:46 +01:00
Sara Souza
ddc0d30063 xtensa/esp32: Added Userled support 2020-10-27 15:38:03 -03:00
GAEHWILER Reto
83745652c4 TCP-stack fix for stalled tcp sockets due to broken keepalive
Fixes an issue where tcp sockets with activated keepalives stalled and
were not properly closed. Poll would not indicate a POLLHUP and therefore
locks down the application.

* tcp_conn_s.tcp_conn_s & tcp_conn_s.keepintvl changed to uint32_t
  According RFC1122 keepidle MUST have a default of 2 hours.
2020-10-27 11:21:56 -07:00
Nathan Hartman
892c6b254a tiva/cc13x2_cc26x2: Fix nxstyle errors
arch/arm/src/tiva/hardware/cc13x2_cc26x2/cc13x2_cc26x2_aon_pmctl.h:

    * Fix nxstyle errors.
2020-10-27 09:54:02 -07:00
Daniel P. Carvalho
8339bac6e4 Replaces BSD license by Apache License. 2020-10-27 11:11:40 -03:00
Daniel P. Carvalho
8c04cc86c0 Improvements on ADC driver
* Add option to start adc at setup
  * Add option to cofigure ADC resolution
  * Add option to cofigure ADC sample time
  * Add option to cofigure ADC DMA
  * Add suport for low level operations.
2020-10-27 11:11:40 -03:00
Dong Heng
d86fd84a8e xtensa/esp32: Add real-time timer support for WiFi 2020-10-27 10:36:34 -03:00