Gregory Nutt
|
6201df6463
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
0d66ba9c00
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
b3daf84b12
|
Top level make will now generate a U-Boot uImage file
|
2014-04-01 11:56:58 -06:00 |
|
Gregory Nutt
|
cbdc9155ab
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
3d8cbb415c
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
a44a4444e2
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
85b0a1a544
|
Costmetic fixes to README and some comments
|
2014-03-30 11:34:18 -06:00 |
|
Gregory Nutt
|
fa5988bf7b
|
Add instructions for running NuttX from NAND or TFTP
|
2014-03-30 10:25:44 -06:00 |
|
Gregory Nutt
|
4410deb8b6
|
SAMA5 Boards: When running from SDRAM, a 32KB offset is needed by the bootloader
|
2014-03-30 10:24:31 -06:00 |
|
Gregory Nutt
|
d14940a375
|
Fix some backward conditional compilation
|
2014-03-30 08:29:21 -06:00 |
|
Gregory Nutt
|
392031ff7c
|
SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards
|
2014-03-30 07:26:38 -06:00 |
|
Gregory Nutt
|
aac2a6759d
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
8bc70e38ab
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
09fb2a1893
|
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
|
2014-03-28 15:20:26 -06:00 |
|
Gregory Nutt
|
d204310623
|
configs/sama5d3x-ek: Fix some typos
|
2014-03-28 15:18:49 -06:00 |
|
Gregory Nutt
|
f12e37cae4
|
Documentatin updated; fix errors in some comments
|
2014-03-28 09:52:07 -06:00 |
|
Gregory Nutt
|
1e7a14ed2e
|
SAMA5D3x-EK: Fix lots of typos in board name
|
2014-03-28 09:11:19 -06:00 |
|
Gregory Nutt
|
a53493eacc
|
SAM4E: Clarify LCD data width
|
2014-03-28 08:29:04 -06:00 |
|
Gregory Nutt
|
d8b2011218
|
SAM4E-EK: Remove bogus LCD driver; replace with information that might be useful to someone who wants to develop an LCD driver for the SAM4E-EK
|
2014-03-27 10:38:21 -06:00 |
|
Gregory Nutt
|
942c6e0e44
|
SAM4E-EK: CMCC is enabled in all configurations and delay loop has been calibrated
|
2014-03-26 17:07:08 -06:00 |
|
Gregory Nutt
|
63af8d88fb
|
SAM4E-EK: All configurations converted to run with 120MHz CPU clock
|
2014-03-26 14:03:33 -06:00 |
|
Gregory Nutt
|
3f4593dda8
|
SAM4E USP: Re-vamp read request queue handling. Add logic to handle RX overrun errors
|
2014-03-26 11:38:47 -06:00 |
|
Gregory Nutt
|
8fb610a537
|
SAMA5D3: Fix some typos in last blind changes backported from the SAM4e. And verified
|
2014-03-25 16:11:33 -06:00 |
|
Gregory Nutt
|
e68f6049c5
|
backport a serial console fix from the sam4e to the sama5d3
|
2014-03-25 14:34:07 -06:00 |
|
Gregory Nutt
|
316bc83220
|
For all configurations that have the default pthread stacksize set to some other value than 2048 AND which have the USB MSC device class enabled, add a definition of CONFIG_USBMSC_SCSI_STACKSIZE so that the size of the stack used by USB MSC SCSI worker thread does not increase
|
2014-03-25 14:21:33 -06:00 |
|
Gregory Nutt
|
3c3506bd13
|
apps/system/usbmsc: Back out kludge that is no longer needed with the recent fix to the USB MSC class
|
2014-03-25 12:42:01 -06:00 |
|
Gregory Nutt
|
03bd2a6ad9
|
Add missing HSCMI configuration options; Make HSMCI configuration naming more compatible; Fix HSCMI clocking to use the CLKODD bit
|
2014-03-24 14:25:40 -06:00 |
|
Gregory Nutt
|
9a484b4c6e
|
Cosmetic updates to comments and README files
|
2014-03-24 10:23:56 -06:00 |
|
Gregory Nutt
|
70c8dcaa34
|
SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ in all board-related files
|
2014-03-23 15:48:10 -06:00 |
|
Gregory Nutt
|
9ff81f3b1f
|
SAM4E-EK: Fixes for HSMCI compilation
|
2014-03-23 15:46:55 -06:00 |
|
Gregory Nutt
|
7cebadd05f
|
Fix condition in conditional compilation associated with USB monitor support
|
2014-03-23 13:33:30 -06:00 |
|
Gregory Nutt
|
b583c95de4
|
Cosmet update to debug messages and to comments
|
2014-03-23 13:32:39 -06:00 |
|
Gregory Nutt
|
4670aab945
|
Fix bad configuration change of last commit
|
2014-03-23 10:38:31 -06:00 |
|
Gregory Nutt
|
9d9631243a
|
SAM4E-EK: Enable interrupt stack in all configurations
|
2014-03-23 10:12:57 -06:00 |
|
Gregory Nutt
|
293b5d7723
|
SAM4E-EK UDP: prevent some bad recursive behavior
|
2014-03-22 17:30:17 -06:00 |
|
Gregory Nutt
|
f066b87828
|
SAM4E-EK: Add an NSH configuration that uses a USB CDC/ACM console
|
2014-03-22 09:27:43 -06:00 |
|
Gregory Nutt
|
9f2ee0966a
|
SAM4E-EK NSH: Increase the number of preallocated WDOGS to 32 to avoid timeout failures
|
2014-03-21 11:22:50 -06:00 |
|
Gregory Nutt
|
06e60bab2b
|
SAM4E UDP: Cosmetic updates to tracing and README
|
2014-03-21 10:45:12 -06:00 |
|
Gregory Nutt
|
349f7155c7
|
Cosmetic update to README
|
2014-03-20 15:21:26 -06:00 |
|
Gregory Nutt
|
de0c5d50da
|
Typo fixed
|
2014-03-20 10:56:43 -06:00 |
|
Gregory Nutt
|
57516a8ede
|
LPC17 USB Host: Minor clean-up after performing some regressin testing
|
2014-03-19 08:33:15 -06:00 |
|
Gregory Nutt
|
47ffb340e9
|
SAM4E UDP: Add support for USB monitor
|
2014-03-18 16:33:36 -06:00 |
|
Gregory Nutt
|
a5bdccebe3
|
TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho
|
2014-03-18 11:21:31 -06:00 |
|
Gregory Nutt
|
5f8304415d
|
SAM4E: Fix a few more UDP bring-up bugs. Still not working
|
2014-03-18 11:00:20 -06:00 |
|
Gregory Nutt
|
fe9023752a
|
SAM4E: Revise board-specific USB MSC support
|
2014-03-18 09:31:02 -06:00 |
|
Gregory Nutt
|
f673057c2f
|
Removed to unnecessary, cloned USB-related logic
|
2014-03-17 14:13:09 -06:00 |
|
Gregory Nutt
|
e869de4272
|
SAM4E: Add USB full speed device (UDP) driver
|
2014-03-17 12:37:55 -06:00 |
|
Gregory Nutt
|
1cde363251
|
SAM3/4: Fleshing out environment to support USB device (UDP)
|
2014-03-16 14:11:22 -06:00 |
|
Gregory Nutt
|
4d34848389
|
SAM4E-EK: NSH configuration now has DMA-based SPI and AT25 Serial FLASH suported enabled by default
|
2014-03-14 12:35:17 -06:00 |
|
Gregory Nutt
|
dba6cca886
|
SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work.
|
2014-03-13 15:54:09 -06:00 |
|