1. When pthread exit, set the default cancellability state to NONCANCELABLE state.
2. Make sure modify tcb->flags is atomic operations.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
The pw_gecos field is not specified in POSIX, but is
present on most implementations.
passwd file format:
name:uid:gid:gecos:dir:shell
ex: gdm❌127:133:Gnome Display Manager:/var/lib/gdm3:/bin/false
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
_assert is a kernel procedure, entered via system call to make the core
dump in privileged mode.
Running exit() from this context is not OK as it runs the registered
exit functions and flushes streams, which must not be done
from privileged mode as it is a security hole.
Thus, implement assert() into user space (again) and remove the exit()
call from the kernel procedure.
This is preparation for flushing streams from user space, like it should
be done.
- Move tg_streamlist (group, kernel space) ->
ta_streamlist (TLS, user space)
- Access stream list via tg_info in kernel
- Access stream list via TLS in user space
- Remove / rename nxsched_get_streams -> lib_getstreams
- Remove system call for nxsched_get_streams
This PR adds the driver for Allwinner A64's MIPI Display Serial Interface (DSI) and MIPI Display Physical Layer (D-PHY).
This driver will be used by the upcoming Display Driver for PINE64 PinePhone.
- `include/nuttx/crc16.h`: Added 16-bit CRC-CCITT
- `libs/libc/misc/Make.defs`: Added 16-bit CRC-CCITT to Makefile
- `arch/arm64/src/a64/Kconfig`: Added the Kconfig option for "A64 Peripheral Selection > MIPI DSI" (`CONFIG_A64_MIPI_DSI`), which enables the MIPI DSI Driver
- `arch/arm64/src/a64/hardware/a64_memorymap.h`: Added the Base Address for MIPI DSI
- `arch/arm64/src/a64/Make.defs`: Added the MIPI DSI Driver to the Makefile
- `libs/libc/misc/lib_crc16ccitt.c`: Compute 16-bit CRC-CCITT
- `arch/arm64/src/a64/mipi_dsi.c`, `mipi_dsi.h`: Compose MIPI DSI Packets (Long, Short, Short with Parameter)
- `arch/arm64/src/a64/a64_mipi_dsi.c`, `a64_mipi_dsi.h`: MIPI DSI Driver for Allwinner A64
- `arch/arm64/src/a64/a64_mipi_dphy.c`, `a64_mipi_dphy.h`: MIPI D-PHY Driver for Allwinner A64
- `platforms/arm/a64/boards/pinephone/index.rst`: Added MIPI DSI as supported peripheral for PinePhone
Co-Authored-By: Petro Karashchenko <petro.karashchenko@gmail.com>
"The number of characters written if successful or negative value if an error occurred.
If the resulting string gets truncated due to buf_size limit, function returns the total
number of characters (not including the terminating null-byte) which would have been written,
if the limit was not imposed." --- https://en.cppreference.com/w/c/io/vfprintf
Signed-off-by: jihandong <jihandong@xiaomi.com>
solve:
almost the Hexadecimal string string->float
such as:
code:float num;
const char *s= "0x123p32lala";
char *p;
num=strtof(s,&p);
printf("num is %f\n",num);
printf("str is %s\n",p);
output:num is 1249835483136.000000
str is lala
but if the input number is much big;
like:
code:const char *s2= "0x999999p100";
num=strtof(s2,&p);
printf("num is %f\n",num);
printf("str is %s\n",p);
corrent : num is 12760587998944832242938906880669384704.000000
real: num is 12760587998944800000000000000000000000.000000
it didn't have enough precision
such as code: double value = +0x1.000000000000080000000000p-600;
printf("Hello, World!! %.7g:f64\n", value);
expected output : Hello, World!! 2.40992e-181:f64
but real output : Hello, World!! 2.40992e-B1:f64
the reason: we want printf "18", but the flag of character is 'B'
and 'B' is '0'+18,so printf 'B';
In order to turn longjmp context-switch safe, it's necessary
to disable interrupts before modifying windowbase and windowstart.
Otherwise, after a context switch, windowstart and windowbase
would be different, leading to a wrongly set windowstart bit due to
longjmp writing it based on the windowbase before the context switch.
This corrupts the registers at the next window overflow reaching
that wrongly set bit.
*Background:*
This PR is related to an issue first observed on ESP-IDF
https://github.com/espressif/esp-idf/issues/5229 and it was, then,
checked on NuttX using a test application.
*The test application:*
To check if the problem affects ESP32, ESP32-S2 and ESP32-S3 on
NuttX, it was created an application based on:
https://en.cppreference.com/w/c/program/longjmp
The application creates 16 tasks (`#define NUMBER_OF_TASKS 16`)
that implements the following daemon:
```
static int setjmp_longjmp_daemon(int argc, char *argv[])
{
for (int i = 0; i < NUMBER_OF_TASKS * 2; i++)
{
jmp_buf env;
volatile int count = 0;
if (setjmp(env) != UINT16_MAX)
{
foo(&env, ++count);
}
}
sem_post(&g_sem);
return EXIT_SUCCESS;
}
```
The main function also initializes a semaphore to avoid application
exiting before tasks return successfully:
```
sem_init(&g_sem, 0, -NUMBER_OF_TASKS);
```
Finally, the round-robin interval was lowered to 1ms to raise the
chances of the longjmp being interrupted by a context switch
(`CONFIG_RR_INTERVAL=1).
This setup was able to reproduce the problem prior to this patch
being applied.
When a7 curl calls dns_query via usrsock, it will wait a usrsock
response with the dns lock held. If a7 rptun recv a dns_addnameserver
event from another core at this time, rptun waits the lock held by
curl in callback. Then curl will never get its usrsock response with
rptun blocked, so the deadlock occurs.
This change will break lock when do usrsock request.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
this is fix a ltp test case and update
the error code of pthread_barrierdestroy
ltptcase is : apps/testing/ltp/ltp/testcases/open_posix_testsuite/conformance/interfaces/pthread_barrier_destroy/2-1.c
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
instead of lib_psa_[get|set]stackaddr.c since the later doesn't exist in kernel mode
regression by:
commit b9b032af72
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Thu Oct 20 03:10:23 2022 +0800
sched/spawn: Support task_spawnattr_[set|get]stacksize in kernel mode
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
modify the return value according to posix standard
------------
SCHED_GET_PRIORITY_MAX(2)
NAME
sched_get_priority_max, sched_get_priority_min - get static priority range
RETURN VALUE
On success, sched_get_priority_max() and sched_get_priority_min() return the
maximum/minimum priority value for the named scheduling policy.
On error, -1 is returned, and errno is set appropriately.
ERRORS
EINVAL The argument policy does not identify a defined scheduling policy.
Signed-off-by: chao an <anchao@xiaomi.com>
testcase:
set TZ CEST
time_t t = time(NULL);
struct tm *ts = localtime(&t);
t = timegm(ts);
t will return (time_t)-1;
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
arm-none-eabi-ld: nuttx/staging/libc.a(lib_impure.o):(.data.impure_data+0x4): undefined reference to `__sf'
arm-none-eabi-ld: nuttx/staging/libc.a(lib_impure.o):(.data.impure_data+0x8): undefined reference to `__sf'
arm-none-eabi-ld: nuttx/staging/libc.a(lib_impure.o):(.data.impure_data+0xc): undefined reference to `__sf'
Toolchain:
Version: GNU Arm Embedded Toolchain to Version 11.3.Rel1(August 8, 2022)
Tar: arm-gnu-toolchain-11.3.rel1-x86_64-arm-none-eabi.tar.xz
Break change:
https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;h=b0cb9f85ca3626e0e68fd451c3090d253ceb4300
Signed-off-by: chao an <anchao@xiaomi.com>
1.Don't include unwind.h when arch specific backtrace is enable
2.Built arch specific backtrace wrapper only when enable
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
to ensure the generated key is unique from each other since only
root pseduo file system really support st_ino field after:
commit d35fbf534d51f7ef72382d9666a1f19e07c6f00f
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Sep 16 14:24:55 2022 +0800
fs: Allocate unique serial number for the root pseduo file system node
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Add check in roundx() functions for infinite or NaN cases
- Add block to avoid style warnings
- Define long double constants and macros for infinity and nan
- Correct return syntax to match NuttX style
- Make c89 compliant
- Fix definitions of INFINITY_L/NAN_L
* include/nuttx/lib/math.h - match standard naming conventions
- Rename isinf_l to isinfl
- Rename isinf_f to isinff
- Add finite()
- Add finitel()
- Add finitef()
- Define isnanl and isnanf
- Define isfinite() so that it uses the appropriate macro
* libs/libc/math/lib_asinf.c
libs/libc/math/lib_asinl.c
libs/libc/math/lib_roundf.c
libs/libc/math/lib_roundl.c
libs/libc/math/lib_sqrtf.c
libs/libc/math/lib_sqrtl.c
- Use renamed macros
- Use correct NAN_x or INFINIT_x macro on returns
```
ubsan_prologue: ================================================================================
ubsan_prologue: UBSAN: array-index-out-of-bounds in symtab/symtab_allsyms.c:62:37
__ubsan_handle_out_of_bounds: index 1619 is out of range for type 'symtab_s [1]'
ubsan_epilogue: ================================================================================
```
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
* libs/libc/stdlib/lib_strtod.c:
(strtod): Add a note about limitations of this implementation
as compared to POSIX in the function's docstring. Also fix a
typo.
* libs/libc/stdlib/lib_strtof.c:
(strtof): Port the changes made to strtod in PR-6952 (commit
c83985c5ce) and add same note as above to docstring.
* libs/libc/stdlib/lib_strtold.c:
(strtold): Same changes as strtof.
g_dns_servers need init before dns_query, Otherwise sim can not add default
dns server when use usrsock mode to share host network.
Avoid similar problems in the future, so directly initialize g_dns_servers.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Summary:
- I noticed that adb shell failed when sh is spawned.
- Finally, I found that an error happened when executing dup2() action
if the file descriptor has the O_CLOEXEC option.
- This commit fixes this issue by dropping the option in the API.
Impact:
- posix_spawn_file_actions_adddup2() only
Testing:
- adbd with sabre-6quad:netnsh (will be merged later)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
some toolchain provider remove const qualifier from global_impure_ptr
(e.g. Espressif) but other provider keep it(e.g. ARM or Cadence), so
let's define const to empty macro to pass the compile and more safety.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
but just format the low 32bits if CONFIG_LIBC_LONG_LONG isn't enabled to
avoid to expand the code space to much.
Note: the size will increase 192 bytes on stm32_tiny:nsh.
Before the change:
text data bss dec hex filename
41444 184 1656 43284 a914 nuttx
After the change:
text data bss dec hex filename
41636 184 1656 43476 a9d4 nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
and remove CONFIG_LIBC_LONG_LONG option to simplify the usage.
note: the size will increase 668
before change:
text data bss dec hex filename
168440 348 4480 173268 2a4d4 nuttx
after change:
text data bss dec hex filename
169108 348 4480 173936 2a770 nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
* libs/libc/misc/lib_getrandom.c, in function getrandom():
We were assigning the return value of _NX_READ() to nbytes, a
variable of the unsigned type size_t. Note that _NX_READ() resolves
to either read() or nx_read(), both of which return the signed type
ssize_t to indicate either the number of bytes read successfully
(>= 0) or an error (< 0). Then we were testing for a negative
size_t value, a condition that can never occur. The end result is
that if an error occured in _NX_READ(), it would never be detected
and getrandom() would return some large positive value. This bug is
corrected by assigning the return value of _NX_READ() to a new local
variable, ret, of size ssize_t.
The "p" format specifier already prepends the pointer address with
"0x" when printing.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Make use of XCHG/BSWAP on x86, REV16 and REV on ARMv6-m and above,
and whatever other optimized instructions on other platforms.
Defines extra CONFIG variables, and removes the unused functions for
endian-swapping. Fixes some oversights in using the macros.
For CONFIG_BUILD_KERNEL using the sched/task/task_exithook implementation
will just not work. It calls user code with kernel privileges which is
a bit of a security issue.
Targets build during the kernel phase did not have their dependencies
specified and thus they were not rebuilt after their dependencies have
changed, for example by changing options in menuconfig.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- This commit adds R_RISCV_JAL support to arch_elf.c
- The code only checks the immediate value but does not relocate it
because it is done by the compiler.
Impact:
- None
Testing:
- Tested with rv-virt:knsh64 (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Do not call strlen() here. Old implementation iterated
over string twice, if searched for position was at the
beginning. This commit changes strrchr() to scan string
only once, regardless of input.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
to fix the gcov link error:
arm-none-eabi-ld: /home/xiaoxiang/vela/prebuilts/gcc/linux/arm/bin/../lib/gcc/arm-none-eabi/10.3.1/thumb/v7e-m/nofp/libgcov.a(_gcov.o): in function `gcov_error_exit':
libgcov-driver.c:(.text+0x7c): undefined reference to `_impure_ptr'
arm-none-eabi-ld: /home/xiaoxiang/vela/prebuilts/gcc/linux/arm/bin/../lib/gcc/arm-none-eabi/10.3.1/thumb/v7e-m/nofp/libgcov.a(_gcov.o): in function `get_gcov_error_file':
libgcov-driver.c:(.text+0x1e0): undefined reference to `_impure_ptr'
arm-none-eabi-ld: /home/xiaoxiang/vela/prebuilts/gcc/linux/arm/bin/../lib/gcc/arm-none-eabi/10.3.1/thumb/v7e-m/nofp/libgcov.a(_gcov.o): in function `gcov_exit_open_gcda_file.isra.0':
libgcov-driver.c:(.text+0x660): undefined reference to `_impure_ptr'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1.Remove CXX_INITIALIZE_MACHO and CXX_INITIALIZE_SINIT
2.Merge cxx_initialize_sinit.c and cxx_initialize_macho.c into cxx_initialize.c
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- Cast to unsigned char for strcmp and strncmp
- strcmp and strncmp are described following by opengroup.org
The sign of a non-zero return value shall be determined by the sign
of the difference between the values of the first pair of bytes
(both interpreted as type unsigned char) that differ in the strings
being compared.
https://pubs.opengroup.org/onlinepubs/9699919799/functions/strcmp.htmlhttps://pubs.opengroup.org/onlinepubs/9699919799/functions/strncmp.html
Impact:
- strcmp and strncmp return value
Testing:
- ostest on sabre-6quad:smp w/ qemu
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Restore the checks which got completely broken by the following change.
```
commit 15142a8b10
Author: anjiahao <anjiahao@xiaomi.com>
Date: Fri Apr 1 16:20:03 2022 +0800
modlib/modlib_bind:fix unsigned_compare with zero
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
```
The jump instruction relocation had an assert that tests for jumps with
an offset of 0. This makes it so that a while(1); statement causes an
assert because the jump instruction points to the same address, which
is perfectly legal.
Addend was not handled correctly in several reloc types.
Add ADD32/64 + SUB32/64 relocations, for some reason the compiler
I use likes to add them.
each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function
Signed-off-by: chao.an <anchao@xiaomi.com>
After check the official specification of ARM ISA
and Thumb ISA, the arch_setjmp_thumb.S are written
by arm unified assembly language,
so it easy to make it works for ARM and thumb ISA.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Error: module/mod_insmod.c:203:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
203 | strncpy(modp->modname, modname, MODLIB_NAMEMAX);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wqueue/kwork_thread.c: In function 'work_start_lowpri':
Error: wqueue/kwork_thread.c:212:22: error: '%lx' directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Werror=format-truncation=]
212 | snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
local/local_sockif.c: In function 'local_getsockname':
Error: local/local_sockif.c:392:11: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
392 | strncpy(unaddr->sun_path, conn->lc_path, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chip/esp32_wifi_utils.c: In function 'esp_wifi_scan_event_parse':
Error: chip/esp32_wifi_utils.c:373:37: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset(ap_list_buffer, 0x0, sizeof(ap_list_buffer));
^
stdio/lib_fputs.c: In function 'fputs':
Error: stdio/lib_fputs.c:99:9: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
Error: stdio/lib_fputs.c:99:27: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
stdio/lib_vfprintf.c: In function 'vfprintf':
Error: stdio/lib_vfprintf.c:40:6: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (stream)
^
string/lib_strdup.c: In function 'strdup':
Error: string/lib_strdup.c:39:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strndup.c: In function 'strndup':
Error: string/lib_strndup.c:56:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strpbrk.c: In function 'strpbrk':
Error: string/lib_strpbrk.c:39:7: error: nonnull argument 'str' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~
Error: string/lib_strpbrk.c:39:15: error: nonnull argument 'charset' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~~~~~
string/lib_strrchr.c: In function 'strrchr':
Error: string/lib_strrchr.c:40:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
Error: time/lib_asctimer.c:73:50: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 12 [-Werror=format-truncation=]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~
time/lib_asctimer.c:73:21: note: directive argument in the range [-2147481748, 2147483647]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
time/lib_asctimer.c:73:3: note: 'snprintf' output between 17 and 68 bytes into a destination of size 26
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g_wday_name[tp->tm_wday], g_mon_name[tp->tm_mon],
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tp->tm_mday, tp->tm_hour, tp->tm_min, tp->tm_sec,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1900 + tp->tm_year);
~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- In case of BUILD_KERNEL, NuttX uses USR mode sp and SVC mode sp.
- The kernel runs on SVC mode sp.
- While the kernel is running, up_getsp() cannot get the TLS address.
- The kernel requires tls_get_info() function.
- For the user land, up_getsp() can be used.
- tls_getinfo.c is always compiled and tls_get_info() function is
filtered by macros in the tls_getinfo.c.
Impact:
BUILD_KERNEL
Testing:
test program on custom Cortex-A9 board (BUILD_KERNEL)
ostest on sabre-6quad:smp (QEMU, BUILD_FLAT)
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds thumb support to arch_elf.c
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Add a list in TCB to track all semphores the task held, so we
can release all holders when exit, so nxsched_verify_tcb
is unnecessary.
Signed-off-by: Zeng Zhaoxiu <walker.zeng@transtekcorp.com>
follow up the following change:
commit 4262b09cbf
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Dec 17 02:58:49 2021 +0800
libc: Implement terminal api regardless of CONFIG_SERIAL_TERMIOS setting
since many functions aren't related to termios directly
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
includes following parts:
add support of sparc in arch/Kconfig
add support of sparc in boards/Kconfig
add sparc dir in arch, add sparc dir in boards
add support of sparc in libs/libc/machine
modify all the coding style problem about saprc
Probably this is a bug of a GCC, but on AMRv7 the code "if (relax_factor > 1)"
generates "bne.n" instruction if "relax_factor" is "int". Few lines above
"relax_factor *= LOG_RELAX_MULTIPLIER;" is done without overflow check hence
at some moment overflow occurs and "relax_factor" becomes a zero and condition
"if (relax_factor > 1)" becomes always evaluated to "true" hence "epsilon"
becomes zero always.
Probably this is not the best way to fix the bug (The best way is to report it
to GCC), but this change allows to get correct behavior of "log" and "logf" for
ARMv7 based MCUs
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
commit e1c306f2dd added sethostname using
strncpy. This replaces it with strlcpy and uses sizeof() instead of
re-calculating the buffer size.
Rename size argument for get/sethostname to match the implementation
- textdomain should set errno to ENOMEM in case if it is not
possible to store domainname
- fix buffer overflow in textdomain if domainname is a string
of NAME_MAX length
- improve textdomain error detection in case if domainname
points to non null terminated buffer
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
For CEVA platform CHAR_BIT is 16, and will do lots of extra work
when use IPC.
We will not support this platform anymore, so remove all the b2c operations.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Show a '%p' thing. A nuttx extension is that the '%p' is followed
by an extra set of alphanumeric characters that are extended format
specifiers.
* - 'S' For symbolic direct pointers (or function descriptors) with offset
* - 's' For symbolic direct pointers (or function descriptors) without offset
printf("%ps %pS\n", ptr, ptr) will print:
module_start module_start+0x0/0x62
Signed-off-by: chao.an <anchao@xiaomi.com>
let the nuttx print out symbolic crash information and
symbolic stack backtraces. This increases the size of the nuttx
somewhat, as all symbols have to be loaded into the nuttx image.
Signed-off-by: chao.an <anchao@xiaomi.com>
argv is allocated from stack and then belong to userspace,
so task_info_s is a best location to hold this information.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This fixes busylooping in work_usrthread, due to incorrect time spec given to sem_timedwait
_SEM_TIMEDWAIT works on absolute time stamps, using CLOCK_REALTIME
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
aio/lio_listio.c:227:7: warning: implicit declaration of function ‘ferr’ [-Wimplicit-function-declaration]
227 | ferr("ERROR: lib_zalloc failed\n");
| ^~~~
aio/lio_listio.c:275:3: warning: implicit declaration of function ‘finfo’ [-Wimplicit-function-declaration]
275 | finfo("Registering signal handler\n");
aio/aio_read.c: In function ‘aio_read_worker’:
aio/aio_read.c:90:11: warning: implicit declaration of function ‘file_pread’; did you mean ‘aio_read’? [-Wimplicit-function-declaration]
90 | nread = file_pread(aioc->aioc_filep, (FAR void *)aiocbp->aio_buf,
| ^~~~~~~~~~
| aio_read
aio/aio_write.c: In function ‘aio_write_worker’:
aio/aio_write.c:85:12: warning: implicit declaration of function ‘file_fcntl’ [-Wimplicit-function-declaration]
85 | oflags = file_fcntl(aioc->aioc_filep, F_GETFL);
| ^~~~~~~~~~
CC: mmap/fs_mmap.c
CC: pthread/pthread_condclockwait.c
aio/aio_write.c:107:18: warning: implicit declaration of function ‘file_write’; did you mean ‘aio_write’? [-Wimplicit-function-declaration]
107 | nwritten = file_write(aioc->aioc_filep,
| ^~~~~~~~~~
| aio_write
aio/aio_write.c:113:18: warning: implicit declaration of function ‘file_pwrite’; did you mean ‘aio_write’? [-Wimplicit-function-declaration]
113 | nwritten = file_pwrite(aioc->aioc_filep,
| ^~~~~~~~~~~
| aio_write
In file included from aio/aio_write.c:34:
aio/aio_write.c:121:12: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
121 | ferr("ERROR: write/pwrite/send failed: %d\n", nwritten);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~
| |
| ssize_t {aka long int}
aio/aio_write.c:121:47: note: format string is defined here
121 | ferr("ERROR: write/pwrite/send failed: %d\n", nwritten);
| ~^
| |
| int
| %ld
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This reverts commit 3724f6be55.
Because there is no real correlation between DNS namesize and NAME_MAX
as far as I know. The former is about network and the latter is about
filesystem. While they might happen to be similar values for
some configurations, it's very confusing to use them this way.
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
and implement all status related change function. the individual
file system change will provide in other upcoming patchset.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8fde9db8eba9586e9c8da078b67e020c26623cf4
include/nuttx/wqueue.h:
libs/libc/wqueue/work_cancel.c:
libs/libc/wqueue/work_queue.c:
sched/wqueue/kwork_cancel.c:
sched/wqueue/kwork_queue.c:
* Fix spelling, grammar, and typos.
* Improve wording in a few areas.
* These changes affect comments only. No functional changes.
since it's useful to redirect these functions to others
sometime(e.g. validate the memory before write).
Change-Id: I6253a9231af8809e8362f4bc5a1bd67fb094c3b0
MIRTOS-107
Add _SC_MONOTONIC_CLOCK to sysconf when CONFIG_CLOCK_MONOTONIC is set
Change-Id: I0ae57798ebe89247a10ccb517e128866d1f907de
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
Fix a problem where the log function would loop infinitely by
calculation error when a specific value was passed. For example,
in the following case, the log function loops infinitely and
never returns. So, this commit fixes to return the right value.
double a = 7883961.5;
double b = log(a);
Note: this patch can get file path from root pseudo file handle,
but a general infrastructure is setup for other file system too.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I86cd79ebb741f2f43fdd398bb7498c40687d949b
since the leap correction is always four bytes in timezone file
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I2d72f5eaf37f0c86d95eaf7504a1b8b1469bf06a
since the similar functions(e.g. strdup/strndup) put into libs/libc/string
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ifb2c0c51298b09014748e5ee8275db51213d6911
since the unwinder not only work with arm but also other arch(e.g. riscv)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I56cc54f2c99560c858362ab2dfba524097385716
from https://pubs.opengroup.org/onlinepubs/007904875/functions/setpriority.html:
1.The nice value shall in the range [-{NZERO},{NZERO} -1]
2.Lower nice value shall cause more favorable scheduling
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5ad60d92abc3b69fbaa406da68cec2e40ca3fa6d
I not two problems in handling of the return error values in PR #3858:
1. In KERNEL mode, the error return value of _SEM_WAIT() will be a negated errno value; in all other modes, it will be -1 (ERROR) with the errno variable set. This must be handled in the test of the returned value: Don't compare with -1; rather check if < 0
2. Also, conversion of the returned value to a negated errno value must be handled differently. This is handled by replacing -get_errno() with the macro _ERRVAL(ret)
This effects only error handling (it fixes it) and no other impacts are expected.
It's better to save one argument by returning pid directly.
This change also follow the convention of task_create.
BTW, it is reasonable to adjust the function prototype a
little bit from both implementation and consistency since
task_spawn is NuttX specific API.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
OS functions in syscall.csv are ordered alphabetically. However, two recently added functions are not in the correct location. This PR simply corrects that ordering.
The ordering of one entry was also corrected in libs/libc/libc.csv. Same issue.
This change is only cosmetic.
Verified only by CI
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
