Gregory Nutt
|
a4a18241d5
|
Updated configuration driver from Ken Pettit
|
2013-11-04 08:52:16 -06:00 |
|
Gregory Nutt
|
b9130ff601
|
SAMA5 CAN: Fix a data alignment problem
|
2013-11-03 10:41:24 -06:00 |
|
Gregory Nutt
|
93aae8c2c5
|
SAMA5 CAN: Add board-specific initialization logic
|
2013-11-03 10:03:52 -06:00 |
|
Gregory Nutt
|
a2b6d12271
|
Fix to SST25 driver to permit faster write modes. From David Sidrane
|
2013-11-02 08:27:13 -06:00 |
|
Gregory Nutt
|
861b8bd511
|
MTD config: Reduce configuration header overhead. From Ken Pettit
|
2013-11-01 12:22:55 -06:00 |
|
Gregory Nutt
|
7bbc46f721
|
Avoid calling pthread_join() to wait for USB MSC thread to terminate: This does not work if the caller of usb_mscuninitialize() is in a different task group than the MSC thread. From David Sidrane
|
2013-11-01 12:09:25 -06:00 |
|
Gregory Nutt
|
af4c5246b0
|
FAT: Fix error return value. In one failure case, success was being returned
|
2013-11-01 11:49:13 -06:00 |
|
Gregory Nutt
|
dae191ec3a
|
Updated spark configuration from David Sidrane, including new USB MSC configuration
|
2013-11-01 11:28:23 -06:00 |
|
Gregory Nutt
|
f8b3dbaa61
|
Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane
|
2013-11-01 11:16:51 -06:00 |
|
Gregory Nutt
|
b102d01046
|
The Mikroe STM32 F4 board now uses /dev/config for configuration data storage. From Ken Pettit
|
2013-11-01 07:50:35 -06:00 |
|
Gregory Nutt
|
b01900d7e6
|
Add an MTD device wrapper that can used to provide a /dev/config that can be used for retaining configuration data. From Ken Pettit
|
2013-11-01 07:39:20 -06:00 |
|
Gregory Nutt
|
532d4c7cbe
|
arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null
ified later usbdev_unregister when the caller gets the error. From David Sidrane
|
2013-10-31 15:27:52 -06:00 |
|
Gregory Nutt
|
adeb33fdd2
|
Fix erase block vs page block confusion in MTD partition logic. From Ken Pettit
|
2013-10-31 10:40:10 -06:00 |
|
Gregory Nutt
|
aebeb50a91
|
SAMA5 PWM register definition header file
|
2013-10-31 10:33:43 -06:00 |
|
Gregory Nutt
|
37d8faff37
|
SAMA5 SSC: Add SSC register definition header file
|
2013-10-30 16:15:51 -06:00 |
|
Gregory Nutt
|
6b8c1cc480
|
CC3000 driver updates from David Sidrane
|
2013-10-30 10:50:26 -06:00 |
|
Gregory Nutt
|
8c5fc5fa88
|
Spark configuration updated by David Sidrane
|
2013-10-30 10:29:51 -06:00 |
|
Gregory Nutt
|
62edceecd4
|
Prep for release 6.31
|
2013-10-28 14:08:34 -06:00 |
|
Gregory Nutt
|
de234b3a89
|
Add for audio sub-format in audion system. From Ken Pettit
|
2013-10-28 12:11:52 -06:00 |
|
Gregory Nutt
|
3fd4629bd7
|
SAMA5 ADC: Seems functional in all modes including DMA
|
2013-10-28 10:08:12 -06:00 |
|
Gregory Nutt
|
d812f25496
|
sched/sched_releasetcb.c: Fix an error handling case where a pthread start-up fails early, before the task type has been saved in the TCB. It is safer to use the sched_releasetcb() task type argument instead of relying on the task type in the TCB to be valid. Reported by David Sidrane
|
2013-10-27 17:22:28 -06:00 |
|
Gregory Nutt
|
1027d9f751
|
STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit
|
2013-10-27 16:23:44 -06:00 |
|
Gregory Nutt
|
376652f293
|
Updated Mikroe STM32F4 configuration from Ken Pettit
|
2013-10-27 08:06:39 -06:00 |
|
Gregory Nutt
|
5fe465749f
|
Updated VS1053 audio driver from Ken Pettit
|
2013-10-27 08:00:16 -06:00 |
|
Gregory Nutt
|
ff682d5292
|
SAMA5: Register definition file for camera interface
|
2013-10-26 08:25:58 -06:00 |
|
Gregory Nutt
|
8c094aeda8
|
CC3000 driver update from David Sidrane (part 2 of 2)
|
2013-10-25 16:39:27 -06:00 |
|
Gregory Nutt
|
ad3539209b
|
Updated Spark board configuration from David Sidrane
|
2013-10-25 15:51:38 -06:00 |
|
Gregory Nutt
|
f39467339e
|
Add ioctl to support software triggering of ADC/DAC conversions
|
2013-10-25 14:19:09 -06:00 |
|
Gregory Nutt
|
28d50790f2
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
Gregory Nutt
|
18e651b670
|
KL25: Update build for compatibility with recent CC3000 changes
|
2013-10-24 13:59:53 -06:00 |
|
Gregory Nutt
|
aab5b6b2d9
|
SAMA5: Hook in timer/counter logic so that it can driver periodic ADC sampling
|
2013-10-24 12:35:42 -06:00 |
|
Gregory Nutt
|
21c59c0aa7
|
Added support for the Olimex STM32 P207 board. From Martin Lederhilger
|
2013-10-24 08:48:04 -06:00 |
|
Gregory Nutt
|
f10069907a
|
Add support for the STM32F207ZE chip. From Martin Lederhilger
|
2013-10-24 08:25:05 -06:00 |
|
Gregory Nutt
|
ba5e6669d0
|
CC3000 driver update from David Sidrane
|
2013-10-24 08:03:32 -06:00 |
|
Gregory Nutt
|
f6f2d2b961
|
SAMA5 Timer/counter library
|
2013-10-23 14:53:37 -06:00 |
|
Gregory Nutt
|
fe0f5ce44b
|
STM32 F1 DAM fix from David Sidrane
|
2013-10-23 14:05:26 -06:00 |
|
Gregory Nutt
|
76764003a5
|
Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y
|
2013-10-23 11:48:57 -06:00 |
|
Gregory Nutt
|
e019782db5
|
Update Changelog
|
2013-10-23 09:13:28 -06:00 |
|
Gregory Nutt
|
e5c2496d6a
|
SAMA5 CAN: Driver is now code complete but still untested
|
2013-10-22 15:47:52 -06:00 |
|
Gregory Nutt
|
f5674c21fa
|
SAMA5: Beginning of a CAN driver
|
2013-10-21 15:52:23 -06:00 |
|
Gregory Nutt
|
781119c0e6
|
SAMA5 CAN: Add register definition file
|
2013-10-21 12:22:27 -06:00 |
|
Gregory Nutt
|
545cef3223
|
scanf() fixes from kfrolov: 1) sscanf() function hangs in the following example: sscanf(2, %u,%u,%u,%u, ...), 2) sscanf() returns incorrect number of parsed numbers if some arguments can't be parsed: sscanf(=2, %u,%u,%u,%u,...)==1 instead of 0, and 3) using of char* instead of const char* in vsscanf function leads to warnings from GCC.
|
2013-10-21 10:41:15 -06:00 |
|
Gregory Nutt
|
ba1ea91e37
|
SAMA5 TC: Add timer/counter register definition file
|
2013-10-20 14:47:02 -06:00 |
|
Gregory Nutt
|
06c87638ae
|
SAMA5 demo configuration: TRNG and /dev/random are now enabled
|
2013-10-20 12:16:17 -06:00 |
|
Gregory Nutt
|
0ebdbfbc88
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
Gregory Nutt
|
6ee8857f9b
|
SAMA5: Initial WDT timer (untested)
|
2013-10-19 12:26:47 -06:00 |
|
Gregory Nutt
|
8954161288
|
SAMA5: Hook RTC into build system; Finish RTC alarm logic; Verify correct behavior of the basic RTC functionality
|
2013-10-19 10:41:20 -06:00 |
|
Gregory Nutt
|
9e8bc003e5
|
Add instructions to enable RTC in the nsh/ configuration; RTC enabled by default in the demo configuration
|
2013-10-19 10:38:23 -06:00 |
|
Gregory Nutt
|
fc3889b154
|
Add CONFIG_DEBUG_RTC
|
2013-10-19 10:35:01 -06:00 |
|
Gregory Nutt
|
a1df31266c
|
SAMA5: Add GPBR register definitions
|
2013-10-19 10:22:21 -06:00 |
|
Gregory Nutt
|
6fda497bc1
|
Updated Spark/cc3000 files from David Sidrane
|
2013-10-18 17:14:58 -06:00 |
|
Gregory Nutt
|
b05bf917b8
|
SAMA5 RTC: Beginning of an RTC driver for the SAMA5
|
2013-10-18 16:56:46 -06:00 |
|
Gregory Nutt
|
f479f5d698
|
Enhanced the FAT32 filesystem code to understand DMA preflight failures, and to use the file sector buffer as a bounce buffer when a user-supplied buffer is not suitable for DMA. From Mike Smith
|
2013-10-18 08:38:44 -06:00 |
|
Gregory Nutt
|
6a524b5734
|
Enhanced the mmcdd_sdio driver to perform DMA preflight operations and fail DMA read/write requests that fail preflighting. From Mike Smith
|
2013-10-18 08:24:18 -06:00 |
|
Gregory Nutt
|
46bf97abfc
|
Add SDIO preflight method
|
2013-10-18 08:15:09 -06:00 |
|
Gregory Nutt
|
944e0fe81d
|
Changes to stm32_dmacapable interfaces from Mike Smith
|
2013-10-18 08:06:23 -06:00 |
|
Gregory Nutt
|
973d11f625
|
STM32 DMA priority corrections from Mike Smith
|
2013-10-18 07:37:24 -06:00 |
|
Gregory Nutt
|
2b70abad0d
|
Typo fixes for UART7 and UART8 DMA configs. From Mike Smith
|
2013-10-18 07:17:55 -06:00 |
|
Gregory Nutt
|
b38468d49f
|
net_sendfile: Let the ACK callback handle the REXMIT flag and don't return until all data has been ACK'd. From Max Holtzberg
|
2013-10-17 09:54:48 -06:00 |
|
Gregory Nutt
|
8ca54913e2
|
Move tcp connection into SYN_RCVD state after aception instead of bypassing and moving directly into ESTABLISHED. From Max Holtzberg.
|
2013-10-17 09:49:33 -06:00 |
|
Gregory Nutt
|
cbed482747
|
TCP: Change how initial MSS is handled. From Max Holtzberg
|
2013-10-17 09:45:38 -06:00 |
|
Gregory Nutt
|
69dac5c775
|
In net_sendfile(), correct parameter passed to netdev_txnotifiy. From Max Holtzberg
|
2013-10-17 09:24:25 -06:00 |
|
Gregory Nutt
|
bf5ae4a374
|
Reset TCP timeout timer when data is ACKed, not when data is sent. From Max Holtzberg
|
2013-10-17 09:19:03 -06:00 |
|
Gregory Nutt
|
408ff55b7e
|
Changed net_close debug output to verbose. From Max Holtzberg (2013-10-17)
|
2013-10-17 09:13:31 -06:00 |
|
Gregory Nutt
|
4e3d02b216
|
Add support for the SST25VF016B serial FLASH. From Davide Sidrane
|
2013-10-16 08:28:58 -06:00 |
|
Gregory Nutt
|
6d3bb7f51c
|
SAMA5D3x-EK NxWM configuration: use 320x320 NuttX logo as the background
|
2013-10-15 16:11:33 -06:00 |
|
Gregory Nutt
|
96885a3afd
|
Use NxWidgets::CScaledBitmap to scale icons in the NxWM taskbar
|
2013-10-15 14:29:06 -06:00 |
|
Gregory Nutt
|
d19eb19af4
|
SAMA5D3x-EK: Add NxWM configuration for the SAMA5D3x-EK boards
|
2013-10-13 18:49:32 -06:00 |
|
Gregory Nutt
|
fa71c8211c
|
SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported
|
2013-10-13 13:08:05 -06:00 |
|
Gregory Nutt
|
02f7c5d8d5
|
SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes
|
2013-10-11 17:12:35 -06:00 |
|
Gregory Nutt
|
edf984df2d
|
ENCX24J600: Improved descriptor handling, free packets on rx abort interrupt. From Max Holtzberg
|
2013-10-11 10:57:58 -06:00 |
|
Gregory Nutt
|
8f7c6e23a6
|
Changed the meaning of the uip_*input functions. They now return success when a packet is dropped; This is needed for the ENCX24J600 driver that must make a decision to return the packet or not: It should not retain dropped packets. From Max Holtzberg
|
2013-10-11 10:48:00 -06:00 |
|
Gregory Nutt
|
ffdaa6b5c5
|
Notify the socket layer if a connection is lost before the monitoring callback has been registered. From Max Holtzberg
|
2013-10-11 10:04:54 -06:00 |
|
Gregory Nutt
|
e9187d3199
|
SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work)
|
2013-10-10 18:44:08 -06:00 |
|
Gregory Nutt
|
b641545f93
|
SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM
|
2013-10-10 12:02:41 -06:00 |
|
Gregory Nutt
|
3b6e63199a
|
Add option to enable Aduino Due specific logic, like pull-up on UART0 RXD. Suggested by gdi@embedders.org
|
2013-10-09 07:35:00 -06:00 |
|
Gregory Nutt
|
baf1353743
|
SAMA5: Add an examples/nx configuration for testing the LCD
|
2013-10-08 16:52:21 -06:00 |
|
Gregory Nutt
|
f8397f8238
|
SAMA5: LCDC driver incorporated into the build system.
|
2013-10-08 15:30:38 -06:00 |
|
Gregory Nutt
|
1807a662a8
|
SAMA5: LCD driver is code complete but untested
|
2013-10-08 12:16:30 -06:00 |
|
Gregory Nutt
|
d5ec15fc78
|
Update to net_close() improvement from Max Holtzberg
|
2013-10-08 09:14:27 -06:00 |
|
Gregory Nutt
|
423cc009ef
|
Cosmetic changes to comments
|
2013-10-06 10:46:56 -06:00 |
|
Gregory Nutt
|
4c884a5079
|
Make net_close() nonblocking and free unestablished connections if no free connections available. From Max Holtzberg
|
2013-10-06 09:48:54 -06:00 |
|
Gregory Nutt
|
d3fa588250
|
SAMA5 LCDC: Add 'skeleton' files that will eventually become an LCDC driver for the SAMA5
|
2013-10-06 09:08:52 -06:00 |
|
Gregory Nutt
|
f6a90114b1
|
Use the new signature of rxnotify caused by the routing table. From Max Holtzberg
|
2013-10-06 07:38:15 -06:00 |
|
Gregory Nutt
|
52797b84a1
|
Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic
|
2013-10-05 19:08:57 -06:00 |
|
Gregory Nutt
|
95ed790c54
|
netdev_findbyaddr() will not use a routing table if one is available. It will also make a better decision in the case there there is no routing table but only a single network interface.
|
2013-10-05 13:16:18 -06:00 |
|
Gregory Nutt
|
d7426cd34d
|
SAMA5: Add LCD register definition header file
|
2013-10-04 10:11:12 -06:00 |
|
Gregory Nutt
|
0ff3852b2f
|
Add a user interface to manage the routing table
|
2013-10-02 10:51:48 -06:00 |
|
Gregory Nutt
|
fee65851ca
|
Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations
|
2013-10-02 08:24:46 -06:00 |
|
Gregory Nutt
|
6d2eba842c
|
Add candidate net/route.h. Not yet integrated
|
2013-10-02 06:58:37 -06:00 |
|
Gregory Nutt
|
ca8ec81688
|
Partial implementation of a simple network routing table.
|
2013-10-01 18:55:20 -06:00 |
|
Gregory Nutt
|
a737c93ea2
|
SAMA5 touchscreen and ADC: A little more progress
|
2013-10-01 11:23:24 -06:00 |
|
Gregory Nutt
|
12c1aef7c2
|
Fix some funny 'cut' results
|
2013-09-30 19:28:46 -06:00 |
|
Gregory Nutt
|
3ea00af9aa
|
net/net_sendfile: High performance sendfile is now functional. From Max Holtzberg
|
2013-09-30 14:37:04 -06:00 |
|
Gregory Nutt
|
50123bd30f
|
Add freedom-kl25z/minnsh configuration: This is an experiment to see just how small we and get an NSH configuration. From Alan Carvalho de Assis.
|
2013-09-30 09:20:11 -06:00 |
|
Gregory Nutt
|
744f3776b7
|
SAMA5: Framework for an touchscreen driver (incomplete)
|
2013-09-30 09:04:21 -06:00 |
|
Gregory Nutt
|
ecd7502c34
|
SAMA5 ADC: Framework for an ADC driver (incomplete)
|
2013-09-30 07:22:34 -06:00 |
|
Gregory Nutt
|
0e02d2b7b4
|
SAMA5 ADC: Beginning ADC register definition file
|
2013-09-29 18:34:09 -06:00 |
|
Gregory Nutt
|
c038f4efe0
|
Dependency generation fix for directories that keep object files in a sub-directory
|
2013-09-29 11:46:10 -06:00 |
|
Gregory Nutt
|
41f0c86cad
|
Optimized sendfile() from Max Holtzberg
|
2013-09-28 14:47:49 -06:00 |
|
Gregory Nutt
|
f3a7625fca
|
ENCX24J600: Use separate pools for RX and TX descriptors. From Max Holtzberg
|
2013-09-28 09:09:00 -06:00 |
|
Gregory Nutt
|
7b9b7cbdec
|
configs/compal_e88 converted to use the kconfig-frontends tools
|
2013-09-27 16:12:44 -06:00 |
|
Gregory Nutt
|
d6503f4dd2
|
Add support for the Motorola C139 phone
|
2013-09-27 15:11:31 -06:00 |
|
Gregory Nutt
|
e1f9d22482
|
OS startup logic should not call group_setupidelfiles() if there is no file system support configured
|
2013-09-27 13:11:34 -06:00 |
|
Gregory Nutt
|
95bfcafb47
|
ENCX24J600: Remove poll for new TX data from TX done interrupt handling
|
2013-09-27 08:34:11 -06:00 |
|
Gregory Nutt
|
cdb56b81b8
|
Networking: Fix backward conditional in test to see if address is in ARP table. From Max Holtzberg
|
2013-09-27 08:27:35 -06:00 |
|
Gregory Nutt
|
95d462cb02
|
Networking: If sending out of the subnet, device lookup by IP will fail. Fall back to ETH0 for now. From Max Holtzberg
|
2013-09-27 08:21:33 -06:00 |
|
Gregory Nutt
|
e4af9572d0
|
Beginng of support for GMII/RGMII PHYs
|
2013-09-26 15:55:21 -06:00 |
|
Gregory Nutt
|
d417ff6460
|
SAMA5 GMAC: Initial driver check-in is just the EMAC driver forced to compile with the GMAC register definitions
|
2013-09-26 10:35:52 -06:00 |
|
Gregory Nutt
|
b3ecd158ac
|
Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested
|
2013-09-25 18:50:14 -06:00 |
|
Gregory Nutt
|
fa027d30e0
|
Move apps/examples/cdcacm to apps/system/cdcacm
|
2013-09-25 17:23:03 -06:00 |
|
Gregory Nutt
|
0b450bc202
|
Move apps/examples/usbmsc to apps/system/usbmsc
|
2013-09-25 16:54:39 -06:00 |
|
Gregory Nutt
|
bbccd73dd0
|
SAMA5 EMAC: Need to pace RX and TX because and RX can result in a TX; Process TX interrupt events before TX interrupt events for the same reason
|
2013-09-25 14:22:35 -06:00 |
|
Gregory Nutt
|
22fe508443
|
Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled
|
2013-09-25 11:50:05 -06:00 |
|
Gregory Nutt
|
7affa54e7e
|
Standardize stack checking interface
|
2013-09-24 11:45:13 -06:00 |
|
Gregory Nutt
|
368867f06e
|
ENCx24J600 UDP backlog support from Maz Holtzberg
|
2013-09-24 09:03:16 -06:00 |
|
Gregory Nutt
|
c68c0cb268
|
SAMA5 HSMCI: Disable TX DMA. it is not reliable
|
2013-09-23 13:54:32 -06:00 |
|
Gregory Nutt
|
8f57ee9e07
|
ZKIT-ARM-1769: LED1 is now user controllable. From Rashid Fatah
|
2013-09-23 07:47:56 -06:00 |
|
Gregory Nutt
|
f22e60c392
|
Use a valid interval for the interrupt endpoint in the CDC/ACM driver
|
2013-09-22 11:35:44 -06:00 |
|
Gregory Nutt
|
3ceac07042
|
SAMA5 OHCI: Back out a change, the real root cause was a bug in the cache logic so the hack is no longer necessary
|
2013-09-22 07:53:51 -06:00 |
|
Gregory Nutt
|
9cb23c5ccb
|
ARMv7-A: Fix some error in alignment to cache line boundaries in the cache operations
|
2013-09-21 15:47:00 -06:00 |
|
Gregory Nutt
|
34804c8ee7
|
SAMA5 OHCI: Fix some problems with D-Cache coherency and physical addressing related to interrupt endpoints
|
2013-09-20 15:22:09 -06:00 |
|
Gregory Nutt
|
ad1d9d2a44
|
Several usability improvements the SAMA5D3x-EK configurations
|
2013-09-20 12:37:36 -06:00 |
|
Gregory Nutt
|
5d0131fc73
|
Names of some USB device definitions changed to avoid collisions
|
2013-09-20 10:00:30 -06:00 |
|
Gregory Nutt
|
dbf07d6d01
|
SAMA5 OHCI: When UPLL drives OHCI the logically correct divider of 10 does not work; But a divider of 5 does. Why?
|
2013-09-19 16:10:46 -06:00 |
|
Gregory Nutt
|
ac3dfce614
|
Fix inconsistency in USB host tracing definitions
|
2013-09-19 08:46:33 -06:00 |
|
Gregory Nutt
|
0c62e5797e
|
SAMA5: Add support for the FPU OS test
|
2013-09-18 10:35:03 -06:00 |
|
Gregory Nutt
|
8f88387712
|
LPC17xx SPI: Remove an unused static prototype that caused a compile time warning
|
2013-09-17 17:14:08 -06:00 |
|
Gregory Nutt
|
226839692d
|
SAMA5 EMAC: Resolve issues with DUAL PHY support needed for both EMAC and GMAC peripherals. EMAC driver is now code complete and builds without complaint
|
2013-09-17 10:55:13 -06:00 |
|
Gregory Nutt
|
af61f846f9
|
Freescale Kinetis KL25Z PIT and TPM module register definitions
|
2013-09-15 17:00:50 -06:00 |
|
Gregory Nutt
|
ed7c7a25e7
|
SAMA5 Ethernet: Add support for PHY interrupts
|
2013-09-15 12:24:42 -06:00 |
|
Gregory Nutt
|
5450d6405d
|
Prep for release 6.30
|
2013-09-14 10:40:18 -06:00 |
|
Gregory Nutt
|
14b3417a85
|
SAMA5 EMAC: Create a empty, skeleton file that will eventually become the SAMA5 EMAC driver
|
2013-09-13 15:04:46 -06:00 |
|
Gregory Nutt
|
50f482f902
|
STM32: Support for the LeafLabs Maple and Maple Mini boards. From Librae
|
2013-09-13 12:45:33 -06:00 |
|
Gregory Nutt
|
b5bdde09cc
|
STM32 Kconfig: Fix STM32 UART7/8 kconfig names and UART DMA. Provided by Lorenz Meier
|
2013-09-13 11:45:32 -06:00 |
|
Gregory Nutt
|
a28c697cfb
|
ROMFS: Fix for file names longer than 15 characters. Provided by Lorenz Meier
|
2013-09-13 11:29:58 -06:00 |
|
Gregory Nutt
|
03413cb676
|
CDC/ACM: Backward condtional compilation fixed. Provided by Lorenz Meier
|
2013-09-13 11:27:03 -06:00 |
|
Gregory Nutt
|
b5254cc5af
|
Make filter register accessible for CAN1 and CAN2. Provided by Lorenz Meier
|
2013-09-13 11:20:10 -06:00 |
|
Gregory Nutt
|
f2f40f35bd
|
SAMA5: Beginning of EMAC and GMAC register definition header files
|
2013-09-12 15:45:12 -06:00 |
|
Gregory Nutt
|
0330eea54d
|
SAMA5 TWI: Cleanup compilation errors that occur when I2C debug is enabled
|
2013-09-12 09:46:20 -06:00 |
|
Gregory Nutt
|
b3018d8bf0
|
Add support for the AT 24C512 EEPROM
|
2013-09-12 09:44:38 -06:00 |
|
Gregory Nutt
|
382a066eae
|
SAMA5: Framework for a TWI driver (incomplete)
|
2013-09-11 12:28:52 -06:00 |
|
Gregory Nutt
|
e49069b92b
|
SAMA5: TWI register definition file
|
2013-09-11 10:23:46 -06:00 |
|
Gregory Nutt
|
349677aaf9
|
Fix a reference counting error in the USB host mass storage class
|
2013-09-10 11:38:40 -06:00 |
|
Gregory Nutt
|
a992004b0e
|
USB MSC host class driver: Don't bother retrying to initialize the FLASH if the interface is returning fatal transfer errors
|
2013-09-09 10:00:16 -06:00 |
|
Gregory Nutt
|
9a9de5de81
|
Fix warnings in USB MSC when compiled for a high speed device; also fix USB MSC default VID/PID configuration
|
2013-09-07 10:12:02 -06:00 |
|
Gregory Nutt
|
0585cd5692
|
Extend USB trace logic. When we are configured to decode and stringify trace data, de-stringification support is not included for class driver trace output
|
2013-09-06 17:24:02 -06:00 |
|
Gregory Nutt
|
b95886626e
|
Back-port some bugfixes from the ENCX24J600 to the ENC28J60 driver (unverified). From Max Holtzberg
|
2013-09-06 13:17:12 -06:00 |
|
Gregory Nutt
|
8912bcb1ea
|
SAMA5D3x-EK: Add support for USB MSC device on AT25 serial flash
|
2013-09-06 13:07:29 -06:00 |
|
Gregory Nutt
|
d361bce93a
|
Networking: Important bug fix. The backlog buffer pointer was not being incrmented so that only the first backlog buffer was getting added to the freelist. From Max Holtzberg
|
2013-09-06 11:43:59 -06:00 |
|