Commit Graph

388 Commits

Author SHA1 Message Date
Gregory Nutt
3bf96c8e7e net/arp: Improve arp_find() commit 9774d35010 to reduce the amount and frequency of data copies. 2018-08-25 07:12:21 -06:00
Gregory Nutt
9774d35010 net/arp: Make the function arp_find() thread-safe. It now returns a copy of the ARP table entry, rather than a potentially unstable reference to the ARP table entry. 2018-08-24 17:36:08 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Jake Choy
b1daa22040 net/udp/udp_finddev.c: Fix for network byte-order issue when checking if an address is a multicast address. 2018-07-17 11:18:11 -06:00
Gregory Nutt
427b3b8fcb Squashed commit of the following:
net/utils:  return from net_breaklock() was being clobbered.
    net/:  Replace all calls to iob_alloc() with calls to net_ioballoc() which will release the network lock, if necessary.
    net/utils, tcp, include/net:  Separate out the special IOB allocation logic and place it in its own function.  Prototype is available in a public header file where it can also be used by network drivers.
    net/utils: net_timedwait() now uses new net_breaklock() and net_restorelock().
2018-07-07 08:26:13 -06:00
Gregory Nutt
30657b769f net/udp/udp_setsockopt.c: Remove a warning about an uninitialized variable. 2018-07-04 18:28:17 -06:00
Gregory Nutt
254924029b net/udp: Restore some legacy behavior that was lost with the implementation of CONFIG_NET_UDP_BINDTODEVICE: If no device has a local address when the broadcast packet is sent and the UDP socket is not bound to a device, there select some arbitrary device. This is certainly lunacy in the case where there are multiple network devices registered because the wrong device will probably be returned. It works find, however, for the legacy case where only a single network device is registered. 2018-07-04 07:35:51 -06:00
Gregory Nutt
cf3dd19352 Fix a typo. 2018-06-26 07:01:27 -06:00
Gregory Nutt
8e6afb958a net/udp: If the interface index of the device bound to a UDP socket is no longer valid because the device has been unregistered, then un-bind the UDP socket. 2018-06-26 06:53:13 -06:00
Gregory Nutt
c439b93627 net/procfs and netdev: Fix some problems with ifconfig introduced with last changes. Also picks up one of Sebastien's changes that did not make it it before. net/udp: Fixes a DEBUGASSERT. 2018-06-25 17:06:11 -06:00
Sebastien Lorquet
65be13bffe net/udp: Finish support for the UDP_BINDTODEVICE protocol socket option 2018-06-25 15:07:53 -06:00
Gregory Nutt
c65e1aa3df Squashed commit of the following:
syscalls/:  Add syscall support for if_nametoindex() and if_indextoname()
    net/: Update some comments.
2018-06-25 12:41:28 -06:00
Gregory Nutt
7c1394d814 Squashed commit of the following:
net/netdev:  Add implementation of if_nametoindex() and if indextoname().
    net/pkt:  Raw AF_PACKET sockets now depend on CONFIG_NETDEV_IFINDEX.
    net/procfs:  Tweak to handle traversal of interfaces if CONFIG_NETDEV_IFINDEX is not defined.
    net/netdev.h:  Update netdev_findbyaddr() to use the assigned device index.
    Trivial typo fix
    net/netdev:  Add support for assigned an interface index to a device when it is regisgtered.
2018-06-25 12:08:10 -06:00
Gregory Nutt
589e3aa54e net/udp: Fix a whole in the address lookup logic. 2018-06-25 07:51:21 -06:00
Gregory Nutt
a0e169ad7b net/: Fix a sixlowpan typo bug recently introduced; Rename g_ipv6_allzeroaddre with the more meaning g_ipv6_unspecaddr since the all-zero address is the IPv6 unspecified address (sometime IN6_ADDR_ANY). Remove more inline tests for IPv6 multicast with tcommint net_is_addr_mcast() macro. Update some comments. 2018-06-23 12:53:27 -06:00
Gregory Nutt
5bb216fb90 net/: There are many different checks for IPv6 multicast addresses. Most of the checks are different. RFC 3513 clearly specifies how to detect an IPv6 multilcast address: they should begin with 0xffxx. I did not change some of the checks in ipv6_input.c, however. In that file, the comments indicate that the code should only pick of certain mulicast address that begin withi 0xff02. 2018-06-23 10:13:38 -06:00
Gregory Nutt
706a6a2c19 Trivial typo fixes 2018-06-23 06:20:25 -06:00
Gregory Nutt
daa04c2eae net/udp: Fix yet another confusion between raddr and laddr introduced in a recent change. 2018-06-22 10:14:47 -06:00
Gregory Nutt
66db9f09f6 Fix a typo introduced in 1b6990b69f. Also some minor design improvment. 2018-06-22 10:09:47 -06:00
Gregory Nutt
1b6990b69f net/udp: When sending a broadcast (or multicast) packet do not attempt to look up the device by the destination IP address. Rather, use the locally bound address for these cases to select the correct network device. 2018-06-22 08:19:17 -06:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00
Gregory Nutt
a186383f2a Recent changes to UDP in order to correct problems with UDP connection mode introduced a new bug: The 'to' address passed to sendto() must now be NULL in connection mode. But there are errors because there was one place where the 'to' address was still being used.
This commit adds logic to first check for UDP connection mode.  If the UDP socket is connected, then the NULL 'to' address is ignored and saved connection address is used instead.
2018-05-17 07:46:09 -06:00
Gregory Nutt
4e8e726ca3 net/udp: Trivial correct in comments due to copy-paste. 2018-05-14 06:36:59 -06:00
Gregory Nutt
3ee61fb890 net/udp: Associated with last commit. Make sure that the new connection flag is cleared when a new UDP connection structure is allocated. 2018-05-13 10:03:55 -06:00
Gregory Nutt
fb8cf9373c net/udp: Resolve race condition in connection-less UDP sockets with read-ahead buffering.
In connection-mode UDP sockets, a remote address is retained in the UDP connection structure.  This determines both there send() will send the packets and which packets recv() will accept.

This same mechanism is used for connection-less UDP sendto:  A temporary remote address is written into the connection structure to support the sendto() operation.  That address persists until the next recvfrom() when it is reset to accept any address.

When UDP read-ahead buffering is enabled, however, that means that the old, invalid remote address can be left in the connection structure for some time.  This can cause read-ahead buffer to fail, dropping UDP packets.

Shortening the time between when he remote address is reset (i.e., immediately after the sendto() completes) is not a solution, that does not eliminate the race condition; in only makes it smaller.

With this change, a flag was added to the connection structure to indicate if the UDP socket is in connection mode or if it is connection-less.  This change effects only UDP receive operations:  The remote address in the UDP connection is always ignored if the UDP socket is not in connection-mode.

No for connection-mode sockets, that remote address behaves as before.  But for connection-less sockets, it is only used by sendto().
2018-05-13 09:57:34 -06:00
Gregory Nutt
efed1b6aa1 net/udp: Remove an unused variable warning. Add some comments. 2018-04-27 18:26:38 -06:00
Gregory Nutt
119ce8730f net/udp: Fix a backward conditional test added in commit 434da18cd7. 2018-04-27 06:35:51 -06:00
Gregory Nutt
434da18cd7 net/udp: Correct an error introduce in recent fixes for UDP connected sockets. The interaction between psock_udp_send() and psock_udp_sendto() was perverse: It should always pass a NULL destinatino address. 2018-04-26 21:58:09 -06:00
Gregory Nutt
091e3f732e net/udp: Fix several issues using connected UDP sockets: sendto() should not accept and address. Normally send() should be used instead. recvfrom() is no longer necessary. recvfrom() and poll() should not reset to accept any addresses but should, instead, only accept inputs and events from the connected remore peer. On of these issues was noted by 李桂丁 <liguiding@pinecone.net>. Changes were made as summarized here: http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch08lev1sec11.html 2018-04-25 08:43:38 -06:00
Gregory Nutt
57f7677128 net/udp: Fix another related error in UDP condition compilatino (was actually using TCP setting, not UDP setting). 2018-03-30 15:30:45 -06:00
Gregory Nutt
51ee2cdd86 net/udp: Fix some errors in conditional compilation. 2018-03-30 12:08:53 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Dmitriy Linikov
a8c58607e9 Merged in hardlulz/modem-3.0-nuttx/fix-sem-EINTR (pull request #603)
Added ECANCELED condition to DEBUGASSERT-s checking sem_wait result

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-20 18:24:53 +00:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
82cb799bb6 net/udp: Fix memory leak with UDP + write buffer is closed. Also update TODO and comments and refresh a configuration. 2018-01-23 11:54:03 -06:00
Gregory Nutt
f2017bded8 net/udp: UDP write buffering is basically functional but needs a lot more verification. 2018-01-23 07:32:17 -06:00
Gregory Nutt
289e4dde06 net/udp and tcp: Yet another (cosmetic) change to UDP and TCP write buffer macro naming. 2018-01-22 19:33:14 -06:00
Gregory Nutt
2d4fa19a54 net/udp: Resolves final design issues with UDP write buffering. 100% code complete but also 100% untested. 2018-01-22 19:27:05 -06:00
Gregory Nutt
fa3ad46897 net/udp: In sendto(), return EHOSTUNREACH if if the network is down. 2018-01-22 18:46:58 -06:00
Gregory Nutt
fef255e5be This commit adds an as-of-yet untested implemented of UDP write buffering.
Squashed commit of the following:

    net/udp:  Address most of the issues with UDP write buffering.  There is a remaining issue with handling one network going down in a multi-network environment.  None of this has been test but it is certainly ready for test.  Hence, the feature is marked EXPERIMENTAL.
    net/udp:  Some baby steps toward a corrected write buffering design.
    net/udp:  Remove pesky write buffer macros.
    Eliminate trailing space at the end of lines.
    net/udp:  A little more UDP write buffering logic.  Still at least on big gaping hole in the design.
    net/udp:  Undefined CONFIG_NET_SENDTO_TIMEOUT.
    net/udp:  Crude, naive port of the TCP write buffering logic into UDP.  This commit is certainly non-functional and is simply a starting point for the implementatin of UDP write buffering.
    net/udp:  Rename udp/udp_psock_sendto.c udp/udp_psock_sendto_unbuffered.c.
2018-01-22 18:32:02 -06:00
Gregory Nutt
0406fff888 net/udp: Remove some conditional logic that was true if there is only a single network device, but not true in the multi-device context. 2018-01-22 14:14:32 -06:00
Gregory Nutt
cccc86da09 This change adds support for semi-standard IPPROTO_ICMP AF_INET datagram sockets. This replaces the old ad hoc, nonstandard way of implementing ping with a more standard, socket interface.
Squashed commit of the following:

    net/icmp:  Finishes off icmp_recvfrom().
    net/icmp:  Add readahead support for IPPROTO_ICMP sockets.
    net/icmp:  Add poll() support for IPPROTO_ICMP sockets.
    net/icmp:  Add a connection structure for IPPROTO_ICMP sockets.
    net/icmp:  Implements sendto for the IPPROTO_ICMP socket.
    net/icmp:  Move icmp_sendto() and icmp_recvfrom() to separate files.  They are likely to be complex (when they are implemented).
    net/icmp:  Hook IPPROTO_ICMP sockets into network.  Fix some naming collisions.  Still missing basic ICMP send/receive logic.
    configs: apps/system/ping current need poll() enabled.
    configs: All defconfig files that use to enable low-level support must now enabled CONFIG_SYSTEM_PING.
    net/icmp:  Adds basic build framework to support IPPROTO_ICMP sockets.
2017-10-23 08:45:12 -06:00
Gregory Nutt
cf5cba953d There was a possible recursion that could eventually overflow the stack. The error occurred when closing the socket with inet_close() while a socket callback was still queued. When the socket callback was executed by devif_conn_event(), this resulted in a call to psock_send_eventhandler() with TCP_CLOSE flag set which then called tcp_lost_connection(). tcp_shutdown_monitor() then called tcp_callback() again, which again called psock_send_eventhandler(), and so on.... Noted by Pascal Speck. Solution is also similar to a solution proposed by Pascal Speck. 2017-10-19 11:55:51 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following:
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following:
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following:
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Gregory Nutt
80412df0b1 UDP Networking: Fix unitialized variable problem found by Coverity 2017-09-13 12:12:57 -06:00
Jussi Kivilinna
547733cbb0 Update net_timedwait() and net_lockedwait() call sites to handle negated errno in return value 2017-09-04 07:56:51 -06:00
Gregory Nutt
8ffb103adb networking: IGMP: Remove special support for interrupt level processing (there is none) and fix some timer cancellation logic. In many files, correct comments. There is no interrupt level processing in the networking layer. 2017-09-02 10:27:03 -06:00
Gregory Nutt
0b2a4eb4bd Networking: A little more wording changes related to interrupts vs. events 2017-08-29 15:08:38 -06:00
Gregory Nutt
04ad162540 Networking: Clean up some naming that has bothered me for a long time... There are no interrupts and no interrupt handlers in the network. There are events and event handler (there used to to be interrupt logic in there years ago but that is long, long gone). 2017-08-29 14:08:04 -06:00
Gregory Nutt
969d7c5814 Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering. 2017-08-21 06:28:59 -06:00
Gregory Nutt
bd7c84b23e Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 14:24:12 -06:00
Gregory Nutt
572cf51fa4 Networking: Rethink IPv6 all-nodes packet routing. 2017-08-08 07:48:07 -06:00
Gregory Nutt
835ae2999d networking: Move a little more to the inet/ subdirectory. 2017-08-07 13:03:23 -06:00
Gregory Nutt
2ada7d5892 IPv6: Remove comparisons to the address with all ones set. IPv6 does not support broadcast addresses and certainly not in that form. Replace with multicast addresses beginning with 0xff02. 2017-08-07 11:50:50 -06:00
Gregory Nutt
799b2d5671 Update comments. 2017-07-17 07:14:12 -06:00
Gregory Nutt
d9a2a3c3f1 Networking: When upd_input() cannot process a packet, it returns ERROR so that network drivers may try calling ipv4_input() later. In this case, it must also set d_len to zero. Otherwise, all network drivers will assume tht there is also an outgoing packet. This results in a gratuitous ARP. 2017-07-17 06:50:39 -06:00
Gregory Nutt
aa2e9c15a5 IP forwarding: Major rearchitecting of the outgoing portion of the IP forwarding logic necessary into to properly received device-related forwarding events. 2017-07-07 20:19:26 -06:00
Gregory Nutt
803235ad4b IP forwaring: Rename some files to get closer to other naming conventions. 2017-07-07 18:45:58 -06:00
Gregory Nutt
7258f1cbfc IP forwarding: Move to separate directory. A few fixes from early testing; In TUN driver, do all polling on worker thread. Otherwise, the stack gets very deep. 2017-07-07 18:33:06 -06:00
Gregory Nutt
b5d7187df6 IP forwarding design simplication; might save some memory. Also fix some compile issues introduce with last commit in MULTINIC configration. 2017-07-06 16:19:10 -06:00
Gregory Nutt
b297066eb9 IP Forwarding: Add IPv4 packet forwarding logic. Initial commit is an untested clone of the IPv6 forwarding logic with a few minor logic changes for IPv4. 2017-07-05 15:12:29 -06:00
Gregory Nutt
edf16c5805 IP forwarding: In check it the Ethernet MAC address is in the ARP/Neighbor table, add an additional check to skip in the case of CONFIG_NET_MULTILINK and the devices is not an Ethernet device. 2017-07-05 12:40:26 -06:00
Gregory Nutt
31f832d8c5 IP forwarding: Flesh out TCP, UDP, and ICMPv6 packet forwarding logic. 2017-07-05 11:01:16 -06:00
Gregory Nutt
65c3fa6375 net/udp: Fix a copy-paste error that could effect networking when both IPv4 and IPv6 are enabled. 2017-07-05 07:27:17 -06:00
Gregory Nutt
5e617f8410 UDP networking: The TTL (time to live) was not being set in the IPv4 or IPv6 header unless the UDP socket was bound. 2017-07-04 12:05:21 -06:00
Gregory Nutt
c0c275c8fc IP forwarding. Adds a little more structure to handle passing packets received on one network device to another network device. Logic is still incomplete. 2017-07-04 10:19:52 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
d5207efb5a Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
bcc6b61fc1 Move include/nuttx/net/iob.h to include/drivers/iob.h; rename CONFIG_NET_IOB to CONFIG_DRIVERS_IOB 2017-04-20 14:53:30 -06:00
Jussi Kivilinna
cd3c9634c8 Add user-space networking stack API (usrsock)
User-space networking stack API allows user-space daemon to
provide TCP/IP stack implementation for NuttX network.

Main use for this is to allow use and seamless integration of
HW-provided TCP/IP stacks to NuttX.

For example, user-space daemon can translate /dev/usrsock
API requests to HW TCP/IP API requests while rest of the
user-space can access standard socket API, with socket
descriptors that can be used with NuttX system calls.
2017-03-31 08:58:14 -06:00
Pascal Speck
8f91c73304 - fixed wrong assert on udp dgram send 2017-03-17 15:13:03 +01:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
2d057c28c8 net: Disable priority inheritance on all semaphores used for signaling 2016-11-03 12:17:02 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
7d0950bb22 net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors. 2016-06-12 07:09:37 -06:00
Gregory Nutt
f4fcdcdb4d net/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 17:37:21 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
c98f00a93b Update comments; trivial addtion to a document. 2016-06-10 09:36:59 -06:00
Gregory Nutt
4f208600aa Replace confusing references to uIP with just 'the network' 2016-05-30 09:31:44 -06:00
Gregory Nutt
8db55f6493 Back out most of previous commit 2016-02-26 06:45:37 -06:00
Gregory Nutt
b0ea870bcc Remove some empty code section comments 2016-02-25 18:34:36 -06:00
Gregory Nutt
9ff645a298 drivers/ieee802154: Add a skeleton IEEE802154 driver 2016-02-25 15:11:30 -06:00
Gregory Nutt
0b441ff1f4 net/: Add basic IEEE 802.15-4 socket support 2016-02-25 14:01:22 -06:00
Gregory Nutt
bcbd8ee964 Networking: Cosmetic change 2016-02-24 19:02:51 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
6209c51206 net/: More clean-up of spacing/alignment issues 2015-10-08 15:10:04 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
4c4868c69f More cosmetic changes: Fix some errors in comments and some indentation problems 2015-08-11 19:23:51 -06:00
Gregory Nutt
850225223d Costmetic fix to a comment 2015-08-11 19:21:15 -06:00
Gregory Nutt
530d229361 net/udp: Add support for send() with connected UDP sockets 2015-08-11 19:17:55 -06:00
Max Neklyudov
7d04104485 Networking: Allow receipt of empty UDP packets. From Max Neklyudov 2015-08-11 08:34:16 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
8f7752d956 Networking: Modify how callback structures are stored to avoid another potential use of a stal pointer. 2015-06-03 08:11:57 -06:00
Gregory Nutt
edbb5d0840 networking: Correct a typo introduced with recent networking changes 2015-06-02 15:04:02 -06:00
Gregory Nutt
04a661a97c TCP networking: Add support for network driver events 2015-05-30 09:12:27 -06:00
Gregory Nutt
ab50e9d04d Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST 2015-05-29 15:16:11 -06:00
Gregory Nutt
34509a9ad5 UDP should use dev=NULL if the address in the lookup is INADDR_ANY 2015-05-29 14:56:44 -06:00
Gregory Nutt
0bdf2d5360 UDP Networking: Misc fixes to get the last changes working + cleanup 2015-05-29 14:32:56 -06:00
Gregory Nutt
2102892e7b Fix missing file and some compilation errors from the last UDP committ 2015-05-29 10:45:41 -06:00
Gregory Nutt
e672bcebfd UDP Networking: Add support for device event notification for UDP transfers. 2015-05-29 10:21:06 -06:00
Gregory Nutt
e81f279315 Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events. 2015-05-28 12:01:38 -06:00
Gregory Nutt
b94321cfb4 Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in 2015-05-27 11:39:44 -06:00
Gregory Nutt
f20ac5ef93 Add inclusion of assert.h in networking files where needed to avoid compilation errors. From Max Neklyudov. 2015-05-13 07:24:22 -06:00
Gregory Nutt
db741dd695 Move some useful internal logic from recvfrom.c and udp_callback.c and put them in ip.h where they can be used more generally 2015-02-17 07:37:44 -06:00
Gregory Nutt
686dcbb79c Move some useful internal macros from udp_send.c and put them in ip.h where they can be used more generally 2015-02-17 07:08:11 -06:00
Gregory Nutt
eb8f5e548f Purely cosmetic changes resulting from last review IPv6 UDP change 2015-02-16 15:23:02 -06:00
Gregory Nutt
3f5ff4b210 IPv4 mapping to IPv6 implementation. Just for UDP. From Macs Neklyudov 2015-02-16 14:33:58 -06:00
Gregory Nutt
a82b8fd71f Networking: Fix several build errors/warning with IPv4 + IPv6 + multiple networks are enabled. 2015-02-10 06:54:10 -06:00
Gregory Nutt
b756df982d net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing. 2015-02-09 18:15:34 -06:00
Gregory Nutt
a07a764d42 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
4ce94a7e95 IPv6: Eliminate a warning from UDP code 2015-02-02 11:37:22 -06:00
Gregory Nutt
4205d68505 Networking: Any linger UDP read-ahead buffers must be freed when UDP socket is closed 2015-01-30 09:44:00 -06:00
Gregory Nutt
a76b87305a Networking: Should fix a few compile errors/warnings reported by Travis 2015-01-30 08:54:40 -06:00
Gregory Nutt
de91d34a19 Networking: Separate out UDP poll logic from socket/net_poll.c into a new udp/udp_netpoll.c; Create a skeleton local/local_netpoll.c for future poll support on Unix domain sockets. 2015-01-30 07:09:25 -06:00
Gregory Nutt
ccc72edc0b Networking: Add UDP read-ahead support and support for poll/select on UDP sockets. From Macs N. 2015-01-30 06:08:26 -06:00
Gregory Nutt
2c7123197c Networking: Move UDP-specifc parts of sendto() out of socket/sendto.c and into udp/udp_sendto.c. Hook in Unix domain sokcet sendto() logic (still just a stub for the moment) 2015-01-28 13:41:24 -06:00
Gregory Nutt
f4bb7f14e1 Networking: Clean up network status collection and presentation for IPv6 2015-01-24 08:26:12 -06:00
Gregory Nutt
e5d1ff373b Networking: IPv4 and IPv6 work together. This fixes a bug necessary to accomplish that as well as cleaning up a couple of other issues 2015-01-23 16:40:18 -06:00
Gregory Nutt
af71b7a1ed Networking: Eliminate a warning with UDP checksums are suppressed 2015-01-23 11:42:12 -06:00
Gregory Nutt
f4ce875711 Networking: Fix issues with UDP packet length and checksum calculations when IPv6 is selected 2015-01-23 09:33:18 -06:00
Gregory Nutt
e22848c19c Networking: UDP checksums must always be used with IPv6 2015-01-23 09:31:44 -06:00
Gregory Nutt
5d31687e75 Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family 2015-01-20 18:14:09 -06:00
Gregory Nutt
adc91965ed NSH library: Disable put and get commends of TFTP client is not enabled; disable wget command if web client is not enabled 2015-01-19 10:32:46 -06:00
Gregory Nutt
2842b5c5d6 Networking: Fix some problems with debug is enabled; fix a warning 2015-01-19 10:16:37 -06:00
Gregory Nutt
eb3c6e8390 Networking: Some fixes for compilation when both IPv4 and IPv6 are enabled 2015-01-18 09:23:22 -06:00
Gregory Nutt
f7663ef0ab Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled 2015-01-18 08:56:05 -06:00
Gregory Nutt
f7681dbb43 Networking: Detangling IPv6/4 logic in UDP connection structures 2015-01-17 14:13:56 -06:00
Gregory Nutt
94f9312150 Networking: Save the IP domain in the connection structure 2015-01-17 13:07:48 -06:00
Gregory Nutt
e2933ca4cc Networking: Oops. Forgot to add a couple of files that were part of an earlier commit 2015-01-17 09:35:27 -06:00
Gregory Nutt
2c251d845c include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received.
net/socket, net/tcp, net/udp:  Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet.  This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934 Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary 2015-01-17 05:59:13 -06:00
Gregory Nutt
8f8259a0d6 Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value. 2015-01-16 15:03:10 -06:00
Gregory Nutt
2663538b0a Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other. 2015-01-16 13:01:08 -06:00
Gregory Nutt
5e938941a6 Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t. 2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4 Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections 2015-01-16 10:01:54 -06:00
Gregory Nutt
5b45605991 Clean a few more IPv6 compilation issues; Add implementation of net_ipv6_maskcmp() 2015-01-15 15:55:52 -06:00
Gregory Nutt
630366272a Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header. 2015-01-15 15:06:46 -06:00
Gregory Nutt
a49f0231d2 Networking: A few more IPv6-related fixes 2015-01-14 18:34:28 -06:00
Gregory Nutt
a7ce1279f9 Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics. 2015-01-14 16:10:38 -06:00
Gregory Nutt
aa9700c1ab Update comments and read me 2014-11-23 12:52:18 -06:00
Gregory Nutt
d2a323ca19 Back inclusion of ipv6.h 2014-11-22 13:26:27 -06:00
Gregory Nutt
d76ed2cbc5 Fix UDP routing error in last commit 2014-11-22 09:08:06 -06:00
Gregory Nutt
251249a954 Back out a misconception about INADDR_ANY introduce with some previous commits 2014-11-22 07:55:45 -06:00
Gregory Nutt
2c2b5e6738 Fix routing of muli-network UDP packets 2014-11-21 17:44:12 -06:00
Gregory Nutt
15c07e0d67 Network: Misc changes to UDP bind logic for the case of multiple networks 2014-11-21 17:00:08 -06:00
Gregory Nutt
4dd021f351 Some ideas for how port assignments might work with multiple network interfaces 2014-11-21 14:21:30 -06:00
Gregory Nutt
8b2b7afdae Update TODO; Cosmetic changes to comments 2014-11-17 15:34:50 -06:00
Gregory Nutt
2e55db369d Network: All logic will now handle varialbe length link layer protocol headers within incoming packets. This permits use of multiple network interfaces with differing data links. For example, ETHERNET + SLIP 2014-11-15 13:13:23 -06:00
Gregory Nutt
8e5ae2ee18 EFM32: Fix typo in connecting ODD GPIO interrupt. Noted by Pierre 2014-11-08 06:18:21 -06:00
Gregory Nutt
73f3ecf7e2 NET: Rename network interrupt event flags more appropriately: TCP_, UDP_, ICMP_, or PKT_ vs UIP_ 2014-07-06 17:22:02 -06:00
Gregory Nutt
a251259f90 NET: Rename some non-configurable constants UIP_ to IP_ or TCP_ 2014-07-06 16:19:26 -06:00
Gregory Nutt
47a502a5e2 NET: Most of the contents of include/nuttx/net/udp.h moved to net/pkt/udp.h 2014-07-05 14:40:29 -06:00
Gregory Nutt
c5fc24e110 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
3e0bd1f1b0 NET: Rename some address comparison macros 2014-07-01 18:11:05 -06:00
Gregory Nutt
96a6c725d5 NET: Some minor clean-up 2014-06-30 19:43:30 -06:00
Gregory Nutt
7dd04db1d2 NET: Rename uip_nextXYZconn to XYZ_netconn 2014-06-30 18:03:58 -06:00
Gregory Nutt
ad3e39e53d NET: Rename uiphdr_ipaddr_copy to net_ipaddr_hdrcopy, uip_ip4addr_conv to net_ip4addr_conv32, and uip_ethaddr_cmp to eth_addr_cmp 2014-06-29 13:20:00 -06:00
Gregory Nutt
c362f21815 NET: Rename uip_ipaddr* to net_ipaddr* 2014-06-29 13:11:08 -06:00
Gregory Nutt
c179369a47 Rename static functions from uip_* to something more appropriate. Globally scoped functions will take more work 2014-06-28 19:26:16 -06:00
Gregory Nutt
8e706eb4ff Rename many functions in net/devif from uip_* to devif_* 2014-06-28 18:36:09 -06:00
Gregory Nutt
5790c94ba3 Rename net/uip to net/devif. Rename uip/uip.h to devif/devif.h 2014-06-28 18:07:02 -06:00
Gregory Nutt
64c8dba8c4 NET: Create net/sockets directory and hook into the build/configuration system 2014-06-28 16:41:55 -06:00
Gregory Nutt
50b749a636 Clean-up naming associated with network checksums 2014-06-27 17:51:32 -06:00
Gregory Nutt
fce2a79abd Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
64ba574ecc Move files to net/utils; make appropriate name changes, most for uip_lock to net_lock 2014-06-26 14:23:21 -06:00
Gregory Nutt
e1091251e6 NET: Move statistcs from uip.h to new netstats.h to remove nasty circular inclusion problem. 2014-06-26 09:32:39 -06:00
Gregory Nutt
f57024406a Clean up IGMP naming 2014-06-25 09:52:36 -06:00
Gregory Nutt
abf04708ce Clean up all UDP-related naming 2014-06-24 18:55:01 -06:00
Gregory Nutt
04985d6d1e Clean up all TCP-related naming 2014-06-24 18:12:49 -06:00
Gregory Nutt
5d1f8180d4 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
626469e30c Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
b9c6b9b425 Networking: Move relevant parts of net/Kconfig to tcp/Kconfig, udp/Kconfig, and pkt/Kconfig 2014-06-18 11:45:55 -06:00
Gregory Nutt
382920b9a9 Move UDP files from net/uip to net/udp 2014-06-18 10:50:09 -06:00