Gregory Nutt
2fa8b9ba34
Xtensa ESP32: Co-processor state is code complete but uncompiled and untested.
2016-10-28 13:03:25 -06:00
Gregory Nutt
9345c6f4db
Xtensa: More co-processor save logic. Still not complete.
2016-10-28 11:56:35 -06:00
Gregory Nutt
a90d0bbf2e
ESP32: A little more co-processor logic. Still not complete.
2016-10-28 11:19:23 -06:00
Gregory Nutt
b4b26285f1
ESP32: Add tie-asm.h
2016-10-28 10:53:14 -06:00
Gregory Nutt
be2a801e30
Xtensa: Add xtensa_coproc.h
2016-10-28 10:33:20 -06:00
Vytautas Lukenskas
5b1a3e6fe0
Restore RS485 mode on serial port open (if RS485 is enabled via menuconfig).
2016-10-28 09:10:11 -06:00
Gregory Nutt
e93bcda8ae
ESP32: Partial co-processor state save logic. Incomplete and will probably be redesigned.
2016-10-28 09:05:39 -06:00
Gregory Nutt
3bacda1565
STM32 Serial: Trivial removal of an extra space in a comment
2016-10-28 07:16:52 -06:00
Marc Rechté
54972a1668
Add STM32 F303RE hello configuration; remove duplicate setting from board.h
2016-10-28 07:16:01 -06:00
Marc Rechté
d58f9d8426
Add STM32 F303RE hello configuration; remove duplicate setting from board.h
2016-10-28 07:15:15 -06:00
Gregory Nutt
1e7f78e5c0
ESP32: Add implementation of up_putc
2016-10-27 18:27:19 -06:00
Gregory Nutt
4b16a64212
sched/Kconfig: Add ranges to START_YEAR, MONTH, and DATE
2016-10-27 18:13:31 -06:00
Gregory Nutt
e6377641a8
sched/Kconfig: Add ranges to START_YEAR, MONTH, and DAY
2016-10-27 18:04:14 -06:00
Gregory Nutt
afcda29646
ESP32: Fix some warnings
2016-10-27 16:46:34 -06:00
Gregory Nutt
6ed5d4b20c
ESP32: Fix some compilation errors
2016-10-27 16:36:22 -06:00
Gregory Nutt
c52ee46f5f
ESP32: More logic added to serial driver.
2016-10-27 16:02:04 -06:00
Alan Carvalho de Assis
ac00982dc8
STM32F103 Minimum: Add rgbled configuration ommitted in previous commit
2016-10-27 15:04:49 -06:00
Gregory Nutt
ff65aa29fa
Merged in paulpatience/nuttx/inttypes (pull request #160 )
...
ez80: Add *PTR definitions to inttypes.h
2016-10-27 20:19:02 +00:00
Paul A. Patience
544f9ccf8a
ez80: Add *PTR definitions to inttypes.h
2016-10-27 16:16:13 -04:00
Gregory Nutt
2c44d1df4b
Merged in paulpatience/nuttx/inttypes (pull request #159 )
...
Add architecture-specific inttypes.h
2016-10-27 20:09:55 +00:00
Paul A. Patience
912fe06a86
Add architecture-specific inttypes.h
2016-10-27 16:01:38 -04:00
Gregory Nutt
6f7c03bd71
ESP32: Add initial serial driver. Taken from SAMV7; not fully converted. Does not yet compile.
2016-10-27 13:55:58 -06:00
Gregory Nutt
bc51fdb96c
ESP32: Add GPIO signal mapping file
2016-10-27 11:04:24 -06:00
Gregory Nutt
cf73c9e1d1
EPS32: Add GPIO ROM interface definitions
2016-10-27 10:43:58 -06:00
Gregory Nutt
123c520db4
Correct time initialization for the case where time is initialized from settings in the .config file. The correct range for month (tm_mon) internally is 0-11, not 1-12 as it is in the .config file.
2016-10-27 08:36:24 -06:00
Gregory Nutt
0967864c92
Correct clock initialization. The correct range for the month is 0-11 but is entered as 1-12 in the .config file
2016-10-27 08:32:23 -06:00
Gregory Nutt
57ad019fba
Revert "Correct a problem in clock_gettime(CLOCK_REALTIME, &time); which is ahead by 1 month of the specified CONFIG_START_MONTH"
...
I don't believe this change is correct in general. Nomralling clock_isleapyear() is called with tm_mon which is in the range of 0-11. That change would be bad for that range. It would make sense for a range of 1-12, but that is not how tm_mon is defined.
This reverts commit 1796a25e53
2016-10-27 08:20:16 -06:00
Marc Rechté
1796a25e53
Correct a problem in clock_gettime(CLOCK_REALTIME, &time); which is ahead by 1 month of the specified CONFIG_START_MONTH
2016-10-27 07:10:36 -06:00
Vytautas Lukenskas
d9c2789253
LPC32xx serial: Fix a typo in ioctl TIOCSRS485 ioctl.
2016-10-27 07:00:32 -06:00
Gregory Nutt
76788040d5
ESP32: Add esp32_config.h
2016-10-26 15:45:03 -06:00
Gregory Nutt
2752e46e08
Merged in david_s5/nuttx-7/david_s5/stm32f76xx77xx_pinmaph-missed-one-1477516213180 (pull request #158 )
...
stm32f76xx77xx_pinmap.h Missed one
2016-10-26 21:12:47 +00:00
David Sidrane
314dd62dd5
stm32f76xx77xx_pinmap.h Missed one
2016-10-26 21:10:59 +00:00
Gregory Nutt
f1479e0cd2
Merged in david_s5/nuttx-6/david_s5/stm32_i2cc-dejavu-1477515604820 (pull request #157 )
...
stm32_i2c.c Dejavu
2016-10-26 21:07:09 +00:00
David Sidrane
0bab23fb1b
stm32_i2c.c Dejavu
2016-10-26 21:00:50 +00:00
Alan Carvalho de Assis
4d29b898a6
Add RGB LED support on STM32F103 Minimum board
2016-10-26 13:27:58 -06:00
Gregory Nutt
ca7ca0eb57
ESP32: More compilation issues
2016-10-26 12:59:31 -06:00
Gregory Nutt
0a96f3a8c8
ESP32: Fix some compilation issues
2016-10-26 12:50:10 -06:00
Gregory Nutt
6a20560ba2
Trivia fix to typo in comment
2016-10-26 12:29:36 -06:00
Gregory Nutt
650757bbf0
ESP32: Add GPIO support
2016-10-26 12:11:24 -06:00
Gregory Nutt
946045075e
ESP32: Remove some long lines in header file
2016-10-26 08:23:09 -06:00
Gregory Nutt
3e13ed2400
Within the OS, when a thread obtains a semaphore count it must call sem_addholder() if CONFIG_PRIORITY_INHERITANCE is enabled. If a count is available, then sem_wait() calls sem_addholder(), otherwise it waited for the semaphore and called sem_addholder() when it eventually received the count.
...
This caused a problem when the thread calling sem_wait() was very low priority. When it received the count, there may be higher priority threads "hogging" the CPU that prevent the lower priority task from running and, as a result, the sem_addholder() may be delayed indefinitely.
The fix was to have sem_post() call sem_addholder() just before restarting the thread waiting for the semaphore count.
This problem was noted by Benix Vincent who also suggested the solution.
2016-10-26 07:23:15 -06:00
Gregory Nutt
6acc831e77
Remove duplicate select from Kconfig
2016-10-26 07:00:24 -06:00
Gregory Nutt
2c09279343
ESP32: Add beginning of GPIO register definition file
2016-10-26 06:27:02 -06:00
Gregory Nutt
e464160730
Merged in slorquet/nuttx/stm32l4_pinouts (pull request #156 )
...
CHxN channels are always outputs
2016-10-26 12:24:11 +00:00
Sebastien Lorquet
f24701f5c7
Merge branch 'master' into stm32l4_pinouts
2016-10-26 13:31:54 +02:00
Sebastien Lorquet
68dae715b0
CHxN channels are always outputs
2016-10-26 13:21:57 +02:00
Gregory Nutt
b8462d3e04
ESP32: Need to take priority into account when allocating CPU interrupts
2016-10-25 16:27:58 -06:00
Gregory Nutt
fef7b414c5
Add logic to attach peripheral interrupt sources to CPU interrupts
2016-10-25 15:19:29 -06:00
Marc Rechte
483f012600
Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress.
2016-10-25 14:14:10 -06:00
Gregory Nutt
6756b44dc3
ESP32: Add framework to assign a a peripheral to a CPU interrupt
2016-10-25 13:16:05 -06:00
