Gregory Nutt
|
38735fafeb
|
More missing semicolons after DEBUGASSERT
|
2015-05-27 13:32:39 -06:00 |
|
Gregory Nutt
|
d41b050526
|
Fix another missing semicolon after DEBUGASSERT
|
2015-05-27 11:49:19 -06:00 |
|
Gregory Nutt
|
d50761428c
|
LPC11: Fix hardcoded BAUD calculation. Is no configurable. From Alan Carvalho de Assis
|
2015-05-27 09:44:07 -06:00 |
|
Gregory Nutt
|
528275a77c
|
Fix some typos
|
2015-05-27 07:34:35 -06:00 |
|
Gregory Nutt
|
ac102d3f85
|
K20: Some preliminary pin definitions
|
2015-05-26 17:02:47 -06:00 |
|
Gregory Nutt
|
318345fb1d
|
Basic support for the Kinetis K20 architecture. Taken from PX4. This is the work of Jakob Odersky.
|
2015-05-26 15:03:35 -06:00 |
|
Gregory Nutt
|
cae38625f8
|
SAM4L: Fix some issues from loast commit. Now running off DFLL with source clock = XOSCK32K
|
2015-05-26 13:25:39 -06:00 |
|
Gregory Nutt
|
b96a141e8a
|
SAML21-Xlplained: Add options to enable XOSC32K and to use it as the DFLL source; NSH configure now uses DFLL with OSC16M source
|
2015-05-26 10:39:38 -06:00 |
|
Gregory Nutt
|
f055d4cac4
|
Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov
|
2015-05-26 08:09:10 -06:00 |
|
Gregory Nutt
|
fe175fbc16
|
SAMD20: Fixes the problem introduced with the SAML21 integration
|
2015-05-25 10:13:06 -06:00 |
|
Gregory Nutt
|
643a98a0a8
|
SAML21: Fix issue with open loop operation; Add configuration options to select clock source
|
2015-05-24 10:27:37 -06:00 |
|
Gregory Nutt
|
9649e564f9
|
LPC11xx: Use offsets instead of absolute address in look-up tables. This saves about 156 bytes of FLASH. From Alan Carvalho de Assis.
|
2015-05-24 07:49:38 -06:00 |
|
Gregory Nutt
|
6973337ccd
|
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
|
2015-05-23 17:08:35 -06:00 |
|
Gregory Nutt
|
8e71f90d84
|
SAML21: Add missing support for GCLK8
|
2015-05-23 17:02:13 -06:00 |
|
Gregory Nutt
|
d495834882
|
SAML21: Several SERCOM fixes. No gets UART output, but at the wrong BAUD
|
2015-05-23 13:08:28 -06:00 |
|
Gregory Nutt
|
84ca7f4a46
|
SAM4L: Re-order some clock initialization. There was a dependency of GCLK0 on DFLL, but DFLL was being enabled after GCLK0
|
2015-05-23 11:01:22 -06:00 |
|
Gregory Nutt
|
41f9fb8c62
|
SAML21: Fix some register definitions; board OSC16M frequency
|
2015-05-23 10:54:51 -06:00 |
|
Gregory Nutt
|
09d1bc7060
|
LPC11xx: Add support for up_getc() which is needed for NSH if there is no file system. From Alan Carvalho de Assis.
|
2015-05-23 09:23:36 -06:00 |
|
Gregory Nutt
|
601aa6e358
|
SAMD/L: Change ordering of some initialization steps to match Atmel sample code. Add Errate 13134 support. SAML wait states changed to 1. Sample code is using 0
|
2015-05-23 08:55:06 -06:00 |
|
Gregory Nutt
|
d1aae43e2a
|
SAM4CM: Add support for optical mode for UART1. From Max Neklyudov.
|
2015-05-23 06:48:36 -06:00 |
|
Gregory Nutt
|
9140a0fcc4
|
Initial support for the NXP LPC11 family and the LPC1115 MCU in particular. Contributed by Alan Carvalho de Assis.
|
2015-05-22 14:14:09 -06:00 |
|
Gregory Nutt
|
1c82e961f5
|
SAML21. With these changes, the board now builds without error
|
2015-05-22 10:36:37 -06:00 |
|
Gregory Nutt
|
0eee2c40a8
|
SAML21: Rename sam_gclk.c to samd_gclk.c. Create saml_gclk.c with corrected logic for the SAML21
|
2015-05-22 07:28:19 -06:00 |
|
Gregory Nutt
|
2314cbd37e
|
SAML21 clock config: Fix a misthink in last commit. Move setting of ONDEMAND to after clock is enabled in most cases
|
2015-05-21 16:50:55 -06:00 |
|
Gregory Nutt
|
2478184c22
|
SAML21: Clean up a few more compilation issues
|
2015-05-21 16:23:15 -06:00 |
|
Gregory Nutt
|
a0b9e26aba
|
SAML21: Add logic to set MCLK CPU and related dividers
|
2015-05-21 13:40:34 -06:00 |
|
Gregory Nutt
|
ed47a08832
|
SAML21: Add FDPLL96M configuration logic
|
2015-05-21 11:52:38 -06:00 |
|
Gregory Nutt
|
786b292b1f
|
SAML21: Add logic to support GLCK peripheral channels; add logic to configure FDPLL lock timer and ref clock GCLKs
|
2015-05-21 10:47:41 -06:00 |
|
Gregory Nutt
|
544a789714
|
SAMD/L: Move GCLK configuration logic to its own C file
|
2015-05-21 10:07:42 -06:00 |
|
Gregory Nutt
|
4a60f1c9f5
|
STM32: Building stm32_rng.c should be conditioned on CONFIG_STM32_RNG, not CONFIG_DEV_RANDOM. From Juha Niskanen
|
2015-05-21 07:47:22 -06:00 |
|
Gregory Nutt
|
790d53bb06
|
SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov.
|
2015-05-21 07:06:47 -06:00 |
|
Gregory Nutt
|
bd2bbfe53a
|
Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
|
2015-05-20 18:34:15 -06:00 |
|
Gregory Nutt
|
ac2fe431aa
|
SAML21: Add some parameter checking for FDPLL96M
|
2015-05-20 13:51:40 -06:00 |
|
Gregory Nutt
|
5eae4c914a
|
Minor restructure for SAML21 FDPLL
|
2015-05-20 13:37:08 -06:00 |
|
Gregory Nutt
|
307d0d0e55
|
SAML21 minor cleanup
|
2015-05-20 13:00:39 -06:00 |
|
Gregory Nutt
|
8075f8ab84
|
SAML32: Update some DFLL logic
|
2015-05-20 12:26:49 -06:00 |
|
Gregory Nutt
|
7000cf8193
|
Fix SYNCBUSY wait for the SAML21
|
2015-05-20 11:49:24 -06:00 |
|
Gregory Nutt
|
321b54f49a
|
Updated EFM32 RTC driver from Pierre-noel Bouteville
|
2015-05-19 14:53:01 -06:00 |
|
Gregory Nutt
|
8980f72251
|
SAML21-Xplained: Update the cloned SAMD20-Xplained board configuration for specifics of the SAML21-Xplained
|
2015-05-19 14:32:09 -06:00 |
|
Gregory Nutt
|
23732e2c9b
|
SAMD/L: Hide differences in the way peripheral clocking is enabled behind macros. Some updates to saml_clockconfig.h + various fixes while working toward SAML21 build
|
2015-05-19 11:03:24 -06:00 |
|
Gregory Nutt
|
b94a8d7ee7
|
Clock configuration logic for the SAML21. Initial commit is just the SAMD20 clock configuration with some naming changes and does not compile
|
2015-05-19 07:02:58 -06:00 |
|
Gregory Nutt
|
792c76c4e6
|
Add saml_trng.h for SAML32
|
2015-05-19 06:31:48 -06:00 |
|
Gregory Nutt
|
0294384dd7
|
Add saml_eic.h for SAML21
|
2015-05-18 18:55:16 -06:00 |
|
Gregory Nutt
|
4458a34787
|
SAML21: Add interrupt header file + fix a few initial compile issues. Still a long way to go
|
2015-05-18 17:41:28 -06:00 |
|
Gregory Nutt
|
dfa87403b3
|
Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build
|
2015-05-18 13:16:32 -06:00 |
|
Gregory Nutt
|
c28a6a91f3
|
Rename sam_fuses.h to samd_fuses.h; add saml_fused.h for the SAML21
|
2015-05-18 11:59:53 -06:00 |
|
Gregory Nutt
|
aecb60a8e8
|
Rename sam_sercom.h to samd_sercom.h; Add saml_sercom.h for the SAML21
|
2015-05-18 10:54:50 -06:00 |
|
Gregory Nutt
|
317fb073ef
|
Rename sam_port.h to samd_port.h; add saml_port.h for the SAML21
|
2015-05-18 10:35:11 -06:00 |
|
Gregory Nutt
|
16a2d363f9
|
Rename sam_nvmctrl.h to samd_nvmctrl.h; add saml_nvmctrl.h for SAML21
|
2015-05-18 09:44:12 -06:00 |
|
Gregory Nutt
|
a8cf79da52
|
Add SAML21 SUPC header file
|
2015-05-18 07:25:30 -06:00 |
|