sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
31,832 Commits 1 Branch 0 Tags 291 MiB
3a029ed185
Commit Graph

91 Commits

Author SHA1 Message Date
Gregory Nutt
31278bc163 Kconfigs: Add comments and a dependency. 2018-02-04 16:32:14 -06:00
Gregory Nutt
8187858d79 Fix a typo just introduced to a Kconfig file 2018-02-04 15:53:01 -06:00
Gregory Nutt
5beab6fbf0 spin_lock_irqsave() and spin_unlock_irqrestore() are only valid if the CPU supports global disabling of interrupts. 2018-02-04 15:41:22 -06:00
Gregory Nutt
1e59d9dd14 armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions. 2018-02-04 12:22:03 -06:00
Gregory Nutt
f3b37e5da3 fs/procfs/fs_procfsprogrem: Add /proc/progmem. This is an alternative way to get the information that was previoulsy available in apps/system/free. apps/system/free was removed beause it made illegal calls into the OS violating the portable interface. This new procfs entry provides the same information with no such violation. 2017-11-13 09:08:39 -06:00
Gregory Nutt
b0fda33e13 Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR 2017-05-13 16:01:38 -06:00
Gregory Nutt
7fe112fe4c Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition. 2017-05-13 11:44:12 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Jussi Kivilinna
325ba1a803 clock: add clock_resynchronize and use subseconds RTC 
Add clock_resynchronize for better synchronization of CLOCK_REALTIME and CLOCK_MONOTONIC to match RTC after resume from low-power state.

Add up_rtc_getdatetime_with_subseconds under CONFIG_ARCH_HAVE_RTC_SUBSECONDS to allow initializing (and resynchronizing) system clock with subseconds accuracy RTC.
 2017-04-21 08:45:57 -06:00
Gregory Nutt
fc5fca5145 Add MAX value definitions to go along with irq_t and irq_mapped_t 2017-03-03 11:48:20 -06:00
Gregory Nutt
e1218c4b4b Smaller vector tables: Add irq_mapped_t. 2017-03-03 10:20:40 -06:00
Gregory Nutt
c2b620b4f8 Implements support for smaller interrupt tables as described at http://www.nuttx.org/doku.php?id=wiki:howtos:smallvectors . This is largely the work of Mark Schulte. However, I have made several changes to match with the Wiki document. If you like the change, thanks go to Marc. For any errors you can blame me. 2017-03-03 09:20:25 -06:00
Gregory Nutt
1b790a61cd Xtensa ESP32: Add stack checking logic. 2016-12-23 15:51:33 -06:00
Gregory Nutt
8de1127899 Xtensa ESP32: Using wrong register to disable interrupts. 2016-12-17 11:00:12 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Ramtin Amin
6ff1c96017 LM32: First commit adds only reviewed architecture header files 2016-10-31 18:41:36 -06:00
Gregory Nutt
29ccdf350a Merge remote-tracking branch 'origin/master' into esp32 2016-10-16 09:53:03 -06:00
Ken Pettit
201a32cf8c Add support for the RISC-V architecture and configs/nr5m100-nexys4 board. I will be making the FPGA code for this available soon (within a week I would say). The board support on this is pretty thin, but it seems like maybe a good idea to get the base RISC-V stuff in since there are people interested in it. 2016-10-16 09:47:07 -06:00
Gregory Nutt
25331aeb63 ESP32 Core: Add an NSH configuration for build testing 2016-10-13 14:37:28 -06:00
Gregory Nutt
852330876b arch/xtensa: A little more ESP32 configuration logic 2016-10-12 14:50:28 -06:00
Gregory Nutt
f43ded46e6 Rename arch/sh to arch/renesas, cont'd 2016-08-06 14:03:38 -06:00
Gregory Nutt
8ee155da3d Rename arch/sh to arch/renesas 2016-08-06 13:33:41 -06:00
Gregory Nutt
8f0c2cdd13 SYSLOG: Change configuration selections to assure that one and only one SYSLOG device can be selected. Also add a check to assure that it is appropriate to use up_putc as the low-level syslog device. Adds CONFIG_SYSLOG_CONSOLE and CONFIG_SYSLOG_SERIAL_CONSOLE. 2016-06-21 09:59:09 -06:00
Gregory Nutt
7f16548f57 Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model. 2016-06-21 05:26:08 -06:00
Gregory Nutt
bf0499aca3 Eliminate another warning 2016-06-20 22:58:39 -06:00
Gregory Nutt
a74c19bbae SIM: Add TLS support to to the simulator 2016-03-11 14:03:27 -06:00
Gregory Nutt
78e4ca2bc7 ARM: Partial implementation of TLS 2016-03-10 19:29:21 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
2f08f2fe6c Missed something in the last commit 2016-02-10 17:30:29 -06:00
Gregory Nutt
0dbbf19fea SIM: Kconfig now indicates that it supports multiple CPUs. 2016-02-10 17:29:04 -06:00
Gregory Nutt
724c1eacaa Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M 2015-07-04 10:39:24 -06:00
Gregory Nutt
37e681f89a Implementment board_power_off() for the simulation platform. 2015-07-04 07:22:38 -06:00
Gregory Nutt
797aa0a138 Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF 2015-07-03 06:53:51 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
42f0eb7d34 Add shared memory initializatin logic 2014-09-23 08:46:31 -06:00
Gregory Nutt
1c0433bdf4 Add README files and configuration support for the shared memory logic 2014-09-23 07:11:47 -06:00
Gregory Nutt
ffff51c1b1 Rename everything associated with the dynamic process stack to ustack to make room in the name space for a kstack 2014-09-14 09:10:09 -06:00
Gregory Nutt
9dbf99f38b Update README, TODO, and make some unfinished configuration options dependent on EXPERIMENTAL 2014-09-13 15:45:26 -06:00
Gregory Nutt
5d4f336b1f Move static helper routines from arm_addrenv.c and may them global so that they can be shared both forthcoming stack address environment logic. 2014-09-13 13:17:44 -06:00
Gregory Nutt
f4bcb27962 Add a configuration option for dynamic stack management 2014-09-13 12:25:32 -06:00
Gregory Nutt
6238e87aaa Add configuration to use the fixed DRAM mapping for the page pool (if available) instead of remapping dynamically to access L2 page tables and page data. Also, add logic in address environment creation to initialize the shared data at the beginning of the .bss/.data process memory region. 2014-09-10 08:41:01 -06:00
Gregory Nutt
5ee6da79cb Remove final traces of the 8015 from the NuttX source tree 2014-09-01 13:21:15 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
1f5813a763 After cached related fix, the ELF example is now functional 2014-08-24 14:12:45 -06:00
Gregory Nutt
839e206a4a Modify ADDRENV Kconfigs. Z180 does not need all of the virtual address settings that the ARM does 2014-08-24 12:54:37 -06:00
Gregory Nutt
95c79c675c Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment 2014-08-24 09:57:53 -06:00
Gregory Nutt
66abb71c57 Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support 2014-08-24 06:42:11 -06:00
Gregory Nutt
f140e112e0 Implements the tickless OS 2014-08-07 11:39:16 -06:00
Gregory Nutt
dd4be66f1c ARM: Move L2 cache initialization to much later in the sequence 2014-07-27 10:03:33 -06:00
Gregory Nutt
e317cef653 The CONFIG_SYSTEMTICK_EXTCLK selection should only be available on systems that support it 2014-04-30 15:32:06 -06:00