Gregory Nutt
|
67792ef05b
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
906edfef85
|
Updated README
|
2014-07-31 15:00:24 -06:00 |
|
Gregory Nutt
|
986fd56650
|
SAMA5D3x-EK NxPlayer: Updated Configuration
|
2014-07-31 11:32:44 -06:00 |
|
Gregory Nutt
|
92194800b4
|
SAMA5D3x-EK: Add a configuration to support the command line NxPlayer.
|
2014-07-31 11:17:28 -06:00 |
|
Gregory Nutt
|
b1d63af30e
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:15:52 -06:00 |
|
Gregory Nutt
|
0fb3f7803c
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
025e5bc3a5
|
SAMA5D3X-EK NSH: Refresh configuration
|
2014-07-31 11:13:10 -06:00 |
|
Gregory Nutt
|
2b0c56a31d
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
42b28ba383
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
ff0de0d603
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
8e20aae28f
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
3e49c4c510
|
SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled
|
2014-07-23 15:20:54 -06:00 |
|
Gregory Nutt
|
8edc57137c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
54986c41d8
|
SAMA5 PCK: Add support for the slow clock as the PCK clock source
|
2014-07-19 13:55:08 -06:00 |
|
Gregory Nutt
|
f240f7e513
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
173c49d3fd
|
SAMA5D4-EK NxWM Configuration: Increase number of preallocated watchdogs and don't save child status (it is not being reaped)
|
2014-07-17 17:56:36 -06:00 |
|
Gregory Nutt
|
117765da5e
|
NxWM: Increase default priority of mouse and keyboard listener threads. Does not seem to make any difference but still seems like a good idea
|
2014-07-17 15:06:05 -06:00 |
|
Gregory Nutt
|
bb6ba5198b
|
Rename CONFIG_NX_MOUSE to CONFIG_NX_INPUT, then add CONFIG_NX_XYINPUT_MOUSE and CONFIG_XYINPUT_TOUCHSCREEN
|
2014-07-16 16:31:31 -06:00 |
|
Gregory Nutt
|
aa8ff82b0f
|
SAMA4D3/4-EK NxWM: Use larger fonts
|
2014-07-14 11:23:41 -06:00 |
|
Gregory Nutt
|
085c48c52a
|
SAMA5D3x-EK: use large icons in the NxWM configuration like the SAMA5D4-EK
|
2014-07-14 06:37:33 -06:00 |
|
Gregory Nutt
|
63196bb13d
|
NxWM: Add 47x49 calculator icon
|
2014-07-13 09:58:50 -06:00 |
|
Gregory Nutt
|
0222f5816f
|
Fixes for clean NxWM build; Updated README files
|
2014-07-10 15:29:41 -06:00 |
|
Gregory Nutt
|
06f8b5a613
|
Update README's to document the new SAMA5D4-EK NxWM configuration
|
2014-07-10 14:10:36 -06:00 |
|
Gregory Nutt
|
ad9b0653f5
|
Some cosmetic typo fixes
|
2014-07-09 07:12:16 -06:00 |
|
Gregory Nutt
|
94ed3a6f51
|
SAMA5D4-EK: Add options to support an LCD
|
2014-07-08 12:46:18 -06:00 |
|
Gregory Nutt
|
19d8b0ce97
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
Gregory Nutt
|
cbe4d3573d
|
Rename apps/examples/uip to apps/examples/webserver
|
2014-07-03 17:31:17 -06:00 |
|
Gregory Nutt
|
5ba0617e9c
|
SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why.
|
2014-07-03 12:28:11 -06:00 |
|
Gregory Nutt
|
285f66a2c1
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
234d118c61
|
SAMA5D4-EK: NSH configuration now supports the RTC
|
2014-06-29 07:40:37 -06:00 |
|
Gregory Nutt
|
caf1b2d641
|
SAMA5D4-EK: NSH confuration now has FAT/ROMFS, /dev/zero, /dev/random via TRNG, an NSH startup script, and a RAM disk at /tmp
|
2014-06-28 16:11:41 -06:00 |
|
Gregory Nutt
|
2be17d64b3
|
SAMA5D4-EK: Add bootloader that runs from ISRAM and loads an Intel HEX file into DRAM
|
2014-06-26 16:42:06 -06:00 |
|
Gregory Nutt
|
37d6366f08
|
SAMA5D4: USART peripheral clock appears to be MCK/2
|
2014-06-20 11:40:36 -06:00 |
|
Gregory Nutt
|
57da49beb3
|
SAMA5D4-EK: Update pins used by HSMCI
|
2014-06-11 14:45:01 -06:00 |
|
Gregory Nutt
|
1634a11bd0
|
SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later
|
2014-06-10 17:40:25 -06:00 |
|
Gregory Nutt
|
962694b5f0
|
Updates to get the SAMA5D3 building again
|
2014-06-10 15:34:57 -06:00 |
|
Gregory Nutt
|
ae142009da
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
Gregory Nutt
|
895851314f
|
Updated SAMA5 SFR header file for the SAMA5D4
|
2014-06-08 07:48:36 -06:00 |
|
Gregory Nutt
|
ad1701d0f9
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
Gregory Nutt
|
ae01e0819d
|
SAMA5: Cosmetic clean-up of README files
|
2014-06-04 17:02:30 -06:00 |
|
Gregory Nutt
|
70207e05e3
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
2dbaed4779
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
8713ee3428
|
SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t
|
2014-04-17 10:01:15 -06:00 |
|
Gregory Nutt
|
5eb9ee30dd
|
Updated README files
|
2014-04-16 16:41:47 -06:00 |
|
Gregory Nutt
|
51950d7850
|
Undefine IRQPRIO in all configurations it should not be set
|
2014-04-16 08:29:39 -06:00 |
|
Gregory Nutt
|
ab5b37189b
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
Gregory Nutt
|
4ea66ca8e4
|
SAMA5D3x-EK: Updates to README.txt
|
2014-04-12 08:00:37 -06:00 |
|
Gregory Nutt
|
cecf3775e2
|
SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.
|
2014-04-11 15:57:35 -06:00 |
|
Gregory Nutt
|
069ea487ae
|
Long needed clean up of DNS resolver for coding style and naming conventions
|
2014-04-11 12:25:32 -06:00 |
|
Gregory Nutt
|
724ad8d7b5
|
Updated README files and comments
|
2014-04-07 07:43:28 -06:00 |
|