Gregory Nutt
|
67a126a5dc
|
Misc USB device changes reated to SAMA5, trace support, and USB monitoring
|
2013-09-01 11:52:21 -06:00 |
|
Gregory Nutt
|
8587026c18
|
SAMA5 UPPHS: Fix a small mountain of compilation errors. Still things to REVISIT so it is not ready for test
|
2013-09-01 11:31:12 -06:00 |
|
Gregory Nutt
|
5c950889cf
|
SAMA5 UDPHS: Support USPHS clock configuration
|
2013-09-01 11:29:51 -06:00 |
|
Gregory Nutt
|
ac130dc2f3
|
CDC/ACM Device: Fixe compilation errors when dual speed support is enabled
|
2013-09-01 11:27:59 -06:00 |
|
Gregory Nutt
|
f4c1568c17
|
SAMA UDPHS: Add pull-up and stall logic. Added to build system but does not yet build
|
2013-08-31 17:37:51 -06:00 |
|
Gregory Nutt
|
147dc5206d
|
Fix typo in Freedom KL25Z function name. From Alan Carvalho de Assis
|
2013-08-31 13:22:25 -06:00 |
|
Gregory Nutt
|
75c9ba5fbb
|
Remove empty README.txt files
|
2013-08-31 13:17:04 -06:00 |
|
Gregory Nutt
|
9d2f55ca97
|
SAMA5 UDPHS: Add endpoint configuration and read DMA logic
|
2013-08-31 12:20:00 -06:00 |
|
Gregory Nutt
|
8df66532ce
|
SAMA5 UDPHS: Bring in UDPHS endpoint interrupt handling logic
|
2013-08-31 10:43:58 -06:00 |
|
Gregory Nutt
|
4a9748dfdf
|
SAMA5 UDPHS: Write DMA logic added. Still incomplete
|
2013-08-30 15:41:06 -06:00 |
|
Gregory Nutt
|
6548308982
|
SAMA5: Updated UDPHS driver. Still incomplete
|
2013-08-30 14:51:41 -06:00 |
|
Gregory Nutt
|
024da6049d
|
SAMA5 UDPHS interrupt decoding logic
|
2013-08-29 18:11:34 -06:00 |
|
Gregory Nutt
|
8c92beb70e
|
SAMA5 UDPHS interrupt decoding logic
|
2013-08-29 17:34:05 -06:00 |
|
Gregory Nutt
|
3b1323a74b
|
SAMA5: Initial framework for a UDPHS USB device side driver
|
2013-08-29 16:29:27 -06:00 |
|
Gregory Nutt
|
be88385911
|
SAMA5: Add high-speed USB register definition header file
|
2013-08-28 17:50:05 -06:00 |
|
Gregory Nutt
|
e862d5d197
|
SAMA5 EHCI: Implemented (but did not test) interrupt endpoint logic
|
2013-08-28 13:07:35 -06:00 |
|
Gregory Nutt
|
1ab10a20bd
|
SAMA5 EHCI: Correct and extend pool allocation logic; Fix data toggle values
|
2013-08-28 10:03:48 -06:00 |
|
Gregory Nutt
|
beb58c2520
|
SAMA5: Fixes a bug in the way that the heap regions were being allocated
|
2013-08-27 16:43:19 -06:00 |
|
Gregory Nutt
|
a3af5b3aaf
|
SAMA5 OHCI+EHCI: Using cp15_clean instead of cp15_coherent; EHCI: Need to set alt pointer in order to handle short transfers.
|
2013-08-27 13:07:21 -06:00 |
|
Gregory Nutt
|
bc46b447dc
|
Fix all occurrences of "the the" in documentation and comments
|
2013-08-27 09:40:19 -06:00 |
|
Gregory Nutt
|
c5802dd5a0
|
Add hooks to select Cortex-A8
|
2013-08-27 08:46:37 -06:00 |
|
Gregory Nutt
|
18126a5fd4
|
SAMA4 EHCI: Correct some backward conditional compilation; fix some warnings
|
2013-08-26 17:03:52 -06:00 |
|
Gregory Nutt
|
12beaf4b1a
|
Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size
|
2013-08-26 15:46:16 -06:00 |
|
Gregory Nutt
|
8130f5bd64
|
SAMA5 EHCI: Status phase is the opposite direction as the data phase
|
2013-08-26 14:28:13 -06:00 |
|
Gregory Nutt
|
40525cedcd
|
SAMA5 EHCI: Taking direction from wrong bit in SETUP request; need to flush data buffer before starting SETUP request
|
2013-08-26 11:05:23 -06:00 |
|
Gregory Nutt
|
463c40c42e
|
ENCX24J600: Use the ENC's SRAM from multiple TX packets. From Max Holtzberg
|
2013-08-26 09:11:58 -06:00 |
|
Gregory Nutt
|
03ad60426d
|
#17 Fix if CONFIG_SDIO_BLOCKSETUP defined, OS will crash. From CCTSAO
|
2013-08-26 08:54:46 -06:00 |
|
Gregory Nutt
|
65c32bea59
|
Fix an bug where long ROMFS file names are not read correctly. From Mike Smith
|
2013-08-25 16:58:41 -06:00 |
|
Gregory Nutt
|
b3df0c1037
|
SAMA5 EHCI: Data toggle and status phase fixes
|
2013-08-25 14:45:08 -06:00 |
|
Gregory Nutt
|
70be601ea2
|
Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg
|
2013-08-25 11:21:54 -06:00 |
|
Gregory Nutt
|
bea6894bd7
|
EHCI reset bit was not being set correctly
|
2013-08-25 10:46:41 -06:00 |
|
Gregory Nutt
|
f1a20f49ff
|
SAMA5 OHCI: Fix semaphore handling bug. OHCI is now function by itself again after changes to integrate with EHCI
|
2013-08-25 08:57:35 -06:00 |
|
Gregory Nutt
|
042abb0856
|
SAMA5 OHCI: Fix backward conditional compilation. Clean-up OHCI/EHCI debug output
|
2013-08-25 08:30:21 -06:00 |
|
Gregory Nutt
|
20b1b584e7
|
Network ARP harvesting: Corect backward condition in netmask task. From Max Holtzberg
|
2013-08-25 07:33:47 -06:00 |
|
Gregory Nutt
|
0582148cfd
|
SAMA5D3x-EK: Fix some backward conditional compilation
|
2013-08-24 14:06:47 -06:00 |
|
Gregory Nutt
|
5f78f6998f
|
SAMA5: OHCI various bugfixes for interrupt handling
|
2013-08-24 13:03:15 -06:00 |
|
Gregory Nutt
|
cd84d1bec4
|
SAMA5: EHCI now handles low- and full-speed connections by giving them to OHCI; OHCI now uses the work queue to defer interrupt processing; If both OHCI and EHCI are enabled, EHCI is the master of the UHPHS interrupt
|
2013-08-24 11:34:24 -06:00 |
|
Gregory Nutt
|
9d0f504340
|
SAMA5 EHCI: Added logic to detect port speed. Handling is insufficient
|
2013-08-24 07:36:05 -06:00 |
|
Gregory Nutt
|
2d5313a931
|
Fix #endif with missing #if condition. Reported by Andrew Bradford
|
2013-08-23 16:40:30 -06:00 |
|
Gregory Nutt
|
7c5f8c86ce
|
SAMA5/ECHI: Debug register access, add logic to determine transfer size, fix setting of control bit in token
|
2013-08-23 16:23:15 -06:00 |
|
Gregory Nutt
|
db1b3c421b
|
SourceForge bug #16 Fix IO pin map. Add CONFIG_SERIAL_TERMIOS support. From CCTSAO
|
2013-08-23 11:48:53 -06:00 |
|
Gregory Nutt
|
bdc7d0523d
|
SAMA5 EHCI: cosmetic changes
|
2013-08-23 11:26:17 -06:00 |
|
Gregory Nutt
|
9a109ba4ba
|
SAMA5: Add support for sharing ports when both OHCI and EHCI are enabled
|
2013-08-23 10:58:30 -06:00 |
|
Gregory Nutt
|
2b3fd9e9c3
|
SAMA5 EHCI: Fix some list traversal bugs
|
2013-08-22 19:32:24 -06:00 |
|
Gregory Nutt
|
eef0f392ec
|
SAMA5 EHCI: Initial debug changes
|
2013-08-22 17:25:00 -06:00 |
|
Gregory Nutt
|
f356586fd3
|
SAMA5 EHCI: No complete for bulk and control endpoints
|
2013-08-22 13:36:16 -06:00 |
|
Gregory Nutt
|
577b19920e
|
SAMA5 EHCI: Add data transfer logic for asynchronous endpoints
|
2013-08-22 10:27:46 -06:00 |
|
Gregory Nutt
|
c1c5e195ce
|
SAMA5 EHCI: Add IOC error handling
|
2013-08-22 09:23:01 -06:00 |
|
Gregory Nutt
|
7e9832f955
|
SAMA5 EHCI: transfer termination logic. Incomplete
|
2013-08-21 17:08:12 -06:00 |
|
Gregory Nutt
|
a5eb830544
|
SAMA5 EHCI: Hardware initialization logic
|
2013-08-21 13:45:54 -06:00 |
|