sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,896 Commits 1 Branch 0 Tags 291 MiB
790d53bb06
Commit Graph

328 Commits

Author SHA1 Message Date
Gregory Nutt
790d53bb06 SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov. 2015-05-21 07:06:47 -06:00
Gregory Nutt
b8483aea40 In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane 2015-05-07 20:36:08 -06:00
Gregory Nutt
5f113517f6 Fix a few typos in comments 2015-05-06 15:26:07 -06:00
Gregory Nutt
40c1484848 Correct some cloned typos involving EHCI 2015-04-27 14:03:24 -06:00
Gregory Nutt
d77a19f0a2 Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
Gregory Nutt
8172e4cec1 More places where watchodg mispelled 2015-04-15 21:36:30 -06:00
Gregory Nutt
6b7a0cb3b8 Revert commit b80e8be652dfa52e97daa65aa3e550cf31cb2409 2015-04-12 06:26:50 -06:00
Gregory Nutt
9ece96b6d3 Remove all traces of CONFIG_ARMV7M_STACKCHECK 2015-04-11 10:01:44 -06:00
Gregory Nutt
929ea217c7 Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
Gregory Nutt
a93913c0f4 SAMA5 Serial: Reading IMR and disabling interrupt must be atomic 2015-04-08 15:27:31 -06:00
Gregory Nutt
35312b31f9 SAM3/4 and SAMV7 UART: The IMR register is read-only. This means that sam_restoreints() does not actually re-enable UART interrupts. 2015-04-08 15:04:10 -06:00
Gregory Nutt
27bb133294 SAM3/4 and SAMV7 Serial: Serial interrupts left disabled. 
A side-effect of changing serial settings via TERMIOS (such as tcsetattr) is that serial interrupts were being left disabled.  This is not a problem if the serial configuration is changed when there are no open references to the serial device.  In that case, serial interrupts are disabled and will not be enabled enabled until the serial device is first opened.  But it is fatal if the serial device is already opened and if there is a task waiting to receive data.  In that case, the side-effect of disabling interrupts is fatal:  That task is then left hanging with interrupts disabled.
 2015-04-08 14:14:01 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
69d2d77424 Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/. 2015-04-01 12:37:44 -06:00
Gregory Nutt
e68baa3073 Include chip/sam_spi.h in sam_spi.h 2015-03-20 11:09:36 -06:00
Gregory Nutt
8d31651a1b Bringing PPPD yet closer to the NuttX coding style 2015-03-11 18:47:04 -06:00
Gregory Nutt
d8a99fb73f SAMV71-XULT: Enable 64-bit floating point support 2015-03-11 12:30:14 -06:00
Gregory Nutt
ed0fa0358c SAMV7: Add PIO register definition header file 2015-03-08 17:34:26 -06:00
Gregory Nutt
bbf80bbd5d SAMV71: Add pin mapping definitions 2015-03-08 13:24:32 -06:00
Gregory Nutt
5b72858f0c SAMV71: Add UART register definition header file 2015-03-08 08:42:22 -06:00
Gregory Nutt
2571d6202d SAMV71-XULT: Add heap allocation logic 2015-03-07 11:46:54 -06:00
Gregory Nutt
b1cecdd3ea SAMV7: Add interrupt-related logic 2015-03-07 11:16:44 -06:00
Gregory Nutt
7f92f22167 SAMV71: Add Supply Controller register definition header file 2015-03-06 15:27:51 -06:00
Gregory Nutt
7113de4d18 SAMV71: Add PMC register definition header files 2015-03-06 14:58:13 -06:00
Gregory Nutt
9bcdf974a0 Add new common lazy FPU state saving option for ARMv7-M. Not yet verified 2015-03-06 08:26:43 -06:00
Gregory Nutt
3b798f6ef1 SAM3/4: Leverage some start-up logic from STM32 2015-03-05 17:45:13 -06:00
Gregory Nutt
f4ec5efe3a SAMV71: Add memory map header file 2015-03-05 15:47:29 -06:00
Gregory Nutt
67c21e6817 SAMV7 Kconfig: Add peripheral selections 2015-03-05 13:51:39 -06:00
Gregory Nutt
5158e10bc2 Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments 2015-03-05 06:41:14 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
59412f25ce SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov. 2015-02-25 08:12:31 -06:00
Gregory Nutt
70c8ff6581 Eliminate some warnings 2015-02-25 08:05:35 -06:00
Gregory Nutt
ff6b34967b Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
Gregory Nutt
501bc15fbd RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
9e6cd16a8b SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
8b0d9fb456 Fix some warning 2015-02-09 18:24:31 -06:00
Gregory Nutt
0a6ae631dc Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers. 2015-02-09 17:16:55 -06:00
Gregory Nutt
d08e29e0a0 Remove and extra endif from the Kconfig 2015-02-03 12:46:40 -06:00
Gregory Nutt
5189cddef2 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
f017f4c8a8 SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
e8f266001d Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
fe4e3f4529 Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt 2015-01-13 15:55:54 -06:00