Gregory Nutt 790d53bb06 SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov.

2015-05-21 07:06:47 -06:00

..

chip

Remove executable flag from more .c and .h files

2015-04-09 08:20:57 -06:00

chip.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

Kconfig

SAMV7 Kconfig: Add peripheral selections

2015-03-05 13:51:39 -06:00

Make.defs

SAMV71-XULT: Enable 64-bit floating point support

2015-03-11 12:30:14 -06:00

sam3u_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam3u_periphclks.h

Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips

2014-02-22 10:38:25 -06:00

sam3x_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam3x_periphclks.h

SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte

2014-09-08 06:14:59 -06:00

sam4cm_freerun.c

SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov.

2015-02-25 08:12:31 -06:00

sam4cm_freerun.h

SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov.

2015-02-25 08:12:31 -06:00

sam4cm_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam4cm_oneshot.c

SAM4CM: Add support for tickless operation

2015-02-03 07:00:54 -06:00

sam4cm_oneshot.h

SAM4CM: Add support for tickless operation

2015-02-03 07:00:54 -06:00

sam4cm_periphclks.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4cm_supc.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam4cm_supc.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam4cm_tc.c

SAM4CM: Add support for tickless operation

2015-02-03 07:00:54 -06:00

sam4cm_tc.h

SAM4CM: Add support for tickless operation

2015-02-03 07:00:54 -06:00

sam4cm_tickless.c

Fix a compilation error. From Macs Neklyudov

2015-02-16 14:30:15 -06:00

sam4e_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam4e_periphclks.h

SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver

2014-03-12 15:03:59 -06:00

sam4l_clockconfig.c

…

sam4l_gpio.c

Two r's and only two r's in the word interrupt

2015-04-23 14:04:43 -06:00

sam4l_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam4l_periphclks.c

Fix typo cloned to many files: SAM32 vs SAM34

2014-02-12 13:00:24 -06:00

sam4l_periphclks.h

…

sam4s_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam4s_periphclks.h

SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S

2014-11-16 06:43:08 -06:00

sam_aes.c

Move crypto header files from include/crypto to include/nuttx/crypto

2014-07-03 18:35:08 -06:00

sam_aes.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_allocateheap.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_clockconfig.c

SAMV71: Add Supply Controller register definition header file

2015-03-06 15:27:51 -06:00

sam_clockconfig.h

…

sam_cmcc.c

SAM4E CMCC: Fix some errors introducted in last check-in

2014-03-26 16:32:16 -06:00

sam_cmcc.h

SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver

2014-03-12 15:03:59 -06:00

sam_dmac.c

Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h

2014-08-08 17:53:55 -06:00

sam_dmac.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_emac.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_emac.h

SAM4E-EK: Add support for PHY insterrupt

2014-10-24 12:28:57 -06:00

sam_gpio.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_gpio.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_gpioirq.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_hsmci.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_hsmci.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_irq.c

SAMV7: Add interrupt-related logic

2015-03-07 11:16:44 -06:00

sam_lowputc.c

SAM3/4 and SAMV7 UART: The IMR register is read-only. This means that sam_restoreints() does not actually re-enable UART interrupts.

2015-04-08 15:04:10 -06:00

sam_lowputc.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_mpuinit.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_mpuinit.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_periphclks.h

Add support for the SAM4CM. From Max Neklyudov

2014-06-25 08:25:52 -06:00

sam_rtc.c

RTC: Remove all backdoor interfaces from rtc.h

2015-02-13 08:41:34 -06:00

sam_rtc.h

RTC: Remove all backdoor interfaces from rtc.h

2015-02-13 08:41:34 -06:00

sam_rtt.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_rtt.h

Add SAM3/4 RTT driver. From Bob Doiron

2014-05-05 14:35:37 -06:00

sam_serial.c

SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov.

2015-05-21 07:06:47 -06:00

sam_spi.c

wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.

2014-08-21 11:16:55 -06:00

sam_spi.h

Include chip/sam_spi.h in sam_spi.h

2015-03-20 11:09:36 -06:00

sam_start.c

In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane

2015-05-07 20:36:08 -06:00

sam_tc.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_tc.h

Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)

2014-04-22 13:42:38 -06:00

sam_timerisr.c

SAMV71: Add PMC register definition header files

2015-03-06 14:58:13 -06:00

sam_udp.c

Fix a few typos in comments

2015-05-06 15:26:07 -06:00

sam_udp.h

Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments

2015-03-05 06:41:14 -06:00

sam_userspace.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_userspace.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_vectors.S

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_wdt.c

More places where watchodg mispelled

2015-04-15 21:36:30 -06:00

sam_wdt.h

Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)

2014-04-22 13:42:38 -06:00