Gregory Nutt
2f12de6f28
Freedom-K64F: Add hooks for automounter; Change NSH configuration to use Windows
2016-07-13 09:23:57 -06:00
ziggurat29
c46b3e869e
Merged nuttx/nuttx into master
2016-07-13 09:35:54 -05:00
Sebastien Lorquet
590af73bd2
STM32L4 Serial: Remove some STM32Fxxx conditional logic; fix a link error resulting from an over-aggressive rename.
2016-07-13 07:10:09 -06:00
Gregory Nutt
76a0cccbb1
K6x Ethernet: Fix some conditional logic
2016-07-13 07:04:19 -06:00
Heath Petersen
426c628559
Merged nuttx/nuttx into master
2016-07-12 23:01:13 -05:00
Heath Petersen
9d999eeb34
update / correct some compilation and linkage settings
...
HOSTCFLAGS: Should not be set the same as CFLAGS since CFLAGS may be for a completely different platform. Use sane defaults like other configs/*/*/Make.defs.
ARCHCPUFLAGS: Depending on how the GNU compiler was built we may need -fno-stack-protector. Since we always want it we can just default to specifying it instead of depending on the compiler default.
LDFLAGS: If compiling for a 32 bit target from a 64 bit platform we need to tell the linker to generate a 32 bit elf file with -m elf_i386.
2016-07-13 03:01:58 +00:00
Heath Petersen
5be790b6dd
update / correct some compilation and linkage settings
...
HOSTCFLAGS: Should not be set the same as CFLAGS since CFLAGS may be for a completely different platform. Use sane defaults like other configs/*/*/Make.defs.
ARCHCPUFLAGS: Depending on how the GNU compiler was built we may need -fno-stack-protector. Since we always want it we can just default to specifying it instead of depending on the compiler default.
LDFLAGS: If compiling for a 32 bit target from a 64 bit platform we need to tell the linker to generate a 32 bit elf file with -m elf_i386.
2016-07-13 02:57:01 +00:00
Ken Pettit
b616918e0f
SmartFS: Fix a 32-byte memory leak
2016-07-12 17:28:06 -06:00
Sebastien Lorquet
6be72272eb
STM32L4: Apply the stm32l4 namespace and FAR qualifiers to the serial driver, also, indentation.
2016-07-12 17:18:46 -06:00
Gregory Nutt
9f72204bb6
Update README
2016-07-12 16:50:27 -06:00
Gregory Nutt
dee77a5dd9
Kinetis Ethernet: Add support for CONFIG_NET_NOINTS
2016-07-12 16:17:35 -06:00
Gregory Nutt
0154e300e8
Freedom K16F: Correct calculations for SDHC clock
2016-07-12 15:05:35 -06:00
Gregory Nutt
6b0b4f9910
Freedom-K64F: Some fixes needed after k64_bringup.c first use.
2016-07-12 14:09:28 -06:00
Gregory Nutt
10667bd38a
Kinetis Ethernet and Freedcom-K64F: PHY address was wrong. Modified driver to try all PHY addresses and then only fail if the driver cannot find a usable PHY address. MDIO pin must have an internal pull-up on the Freedom-K64F.
2016-07-12 14:09:27 -06:00
ziggurat29
67d5144ee3
Merged nuttx/nuttx into master
2016-07-12 13:18:01 -05:00
Gregory Nutt
74037a7951
Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #97 )
...
fixes to n25qxxx mtd driver for smartfs support, etc...
2016-07-12 12:16:13 -06:00
ziggurat29
a45bc22eb5
update stm32l476 disco to include init code for smartfs and nxffs for cases where those fs are included in build.
2016-07-12 12:33:25 -05:00
ziggurat29
74777499bc
alter the notion of 'blocksize' to be equivalent to 'flash write page size' in order to align with assumptions in the smartfs driver (at least, maybe other things do as well).
...
Correct a bug that was previously masked by having blocksize=eraseblocksize which would cause buffer overflows and delicious hardfaults.
Trivial spelling changes in comments, etc.
2016-07-12 11:46:08 -05:00
Sebastien Lorquet
0d41a1cd42
Before accessing the sst26 flash, the "Global Unlock" command must me executed, which I do in the sst26 driver.
...
BUT. re-reading the datasheet, the WREN instruction is required to enable the execution of this command. This was not done.
I have no idea how the driver currently works except by chance. The writes
should never happen at all, the flash is half-enabled!
2016-07-12 10:34:03 -06:00
Gregory Nutt
96edfdb4c7
libm: Fix/improve range checks in lib_expi() and lib_expif().
2016-07-12 09:59:10 -06:00
Gregory Nutt
de3b8d85a4
Freedom K64F: Add a networking NSH configuration.
2016-07-12 09:59:09 -06:00
Gregory Nutt
c8f053de92
Kinetis Ethernet: Add support for the KSZ8081 PHY
2016-07-12 09:59:08 -06:00
Gregory Nutt
3bc504b685
Per comment from David Alession: M_E128 will never be used since it is greater than FLT_MAX.
2016-07-12 09:59:08 -06:00
Gregory Nutt
38999dfe9d
Fix two incorrectly named header files
2016-07-12 09:46:31 -06:00
Gregory Nutt
765098d840
Merged in HeathPetersen/nuttx (pull request #96 )
...
Master
2016-07-12 06:27:15 -06:00
Heath Petersen
dc72e16625
handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not enabled
2016-07-12 06:50:58 +00:00
Heath Petersen
4f75609fa9
fix qemu-i486/nsh/Make.defs test for M32
2016-07-12 05:43:23 +00:00
Heath Petersen
b1740bc5d6
fix qemu-i486/ostest/Make.defs test for M32
2016-07-12 05:41:17 +00:00
Gregory Nutt
f816e7a69b
Merged in slorquet/nuttx/pr_fixes (pull request #95 )
...
Pr_fixes
2016-07-11 17:07:40 -06:00
Sebastien Lorquet
4172016667
revert changes made by greg
2016-07-12 01:04:15 +02:00
Sebastien Lorquet
5e12d6203e
Cosmetic changes after PR 94
2016-07-12 00:57:18 +02:00
Gregory Nutt
9dd70ffbae
Freedom K64F: Green and Blue LEDs reversed
2016-07-11 16:54:20 -06:00
Gregory Nutt
c80b627e8d
Partial review of last PR
2016-07-11 16:28:54 -06:00
Sebastien Lorquet
749b54fbda
PR fixes for oneshoot and freerun
2016-07-12 00:16:08 +02:00
Gregory Nutt
a48fb1e41c
Merged in slorquet/nuttx/stm32l4_renames (pull request #94 )
...
stm32l4_renames
2016-07-11 16:05:27 -06:00
Gregory Nutt
d37c5718aa
Update README.txt
2016-07-11 16:04:07 -06:00
Sebastien Lorquet
4f5d22c940
fix a typo
2016-07-12 00:03:38 +02:00
Sebastien Lorquet
3a873a44ef
renames in USB OTG
2016-07-11 23:59:24 +02:00
Sebastien Lorquet
4dd020784a
renames in tickless
2016-07-11 23:57:57 +02:00
Gregory Nutt
dfe8596e53
Cosmetic
2016-07-11 14:15:34 -06:00
Gregory Nutt
f9d4b50207
If there are no streams, let printf() fall back to use syslog() for output.
2016-07-11 13:52:21 -06:00
Gregory Nutt
29eae10232
lib_expi/f(): Exponental table should be 'const'. Dimension was wrong for float version.
2016-07-11 13:53:31 -06:00
Gregory Nutt
6a081e118d
Add guess at missing lib_libexpif.c file
2016-07-11 13:43:43 -06:00
Gregory Nutt
fb1855244e
STM32 timer: Eliminate a warning
2016-07-11 13:13:17 -06:00
Gregory Nutt
67a9549355
TMPFS: Eliminate some warnings
2016-07-11 11:19:58 -06:00
Sebastien Lorquet
ce09af0da7
Rename STM32L4 PWM routines. this WILL BREAK configs
2016-07-11 19:13:06 +02:00
Gregory Nutt
5185a838ed
Fix a broken file inclusion
2016-07-11 11:12:08 -06:00
Sebastien Lorquet
d347d7ce7e
renames in oneshoot
2016-07-11 19:06:14 +02:00
Sebastien Lorquet
34a7b0ea8e
Renames stm32_ -> stm32l4_ on old files and rtcc/basic timers
2016-07-11 19:05:09 +02:00
Sebastien Lorquet
bf3691ebf0
Remove the includes/apps link to apps/include. It is no longer used.
2016-07-11 10:53:00 -06:00