sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7,552 Commits 1 Branch 0 Tags 291 MiB
92d6883a71
Commit Graph

7552 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
9a4bd3e028 Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:49:52 -06:00
Gregory Nutt
11c29aebbc Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
9d2d8d30ea STM32 lowputc: Fix an error in conditional compilation. From Sami Pelkonen 2014-05-20 08:12:07 -06:00
Gregory Nutt
44a3397283 sig_mqnotempty(): Test for a valid signal number inverted. From eero.nurkkala 2014-05-20 07:38:43 -06:00
Gregory Nutt
1b39aff8b4 SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled 2014-05-15 11:41:58 -06:00
Gregory Nutt
83828d5fe3 Misc changes while testing the SAM4E-EK LCD (still does not work) 2014-05-14 15:31:38 -06:00
Gregory Nutt
de71f53351 SAM4E-EK: Ooops.. two touchscreen drivers(?) 2014-05-14 10:56:03 -06:00
Gregory Nutt
d78aa34ecb Fix one error that I made in the last check-in (there are probably more) 2014-05-14 08:09:08 -06:00
Gregory Nutt
6018da5181 Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona 2014-05-14 07:48:47 -06:00
Gregory Nutt
59e254d1f6 correct some columnar alignment and spacing 2014-05-13 14:14:57 -06:00
Gregory Nutt
47dad8d7cf STM32 I2C: Cosmetic changes in preparation to merge a change 2014-05-13 13:11:10 -06:00
Gregory Nutt
c50fc79798 SAM4E-EK: Add a touchscreen driver (untestd on initial checkin) 2014-05-13 11:28:38 -06:00
Gregory Nutt
c48bd737d0 SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing) 2014-05-13 10:38:46 -06:00
Gregory Nutt
ddf151c226 A fix to the last MB85RS1MT patch 2014-05-12 21:42:06 -06:00
Gregory Nutt
e3373aaf39 Add support for Fujitsu MB85RS1MT part. From Charles Ash 2014-05-12 18:43:06 -06:00
Gregory Nutt
4e55571c21 SAM4E: PIO definition clean-up 2014-05-12 18:42:25 -06:00
Gregory Nutt
6e86ae89dd Fix typo RBG -> RGB in several macros 2014-05-12 13:00:48 -06:00
Gregory Nutt
7aff487faa Add ILI9325 register definition header file 2014-05-12 11:24:57 -06:00
Gregory Nutt
8ef77ac3d9 Updated README and comments 2014-05-10 11:36:20 -06:00
Gregory Nutt
75d3d33169 STM32 I2C: Bring in PX4 fix for I2C in very high noise environments or with rogue perpipherals. Taken from the PX4 commit by Tridge 2014-05-10 10:34:05 -06:00
Gregory Nutt
806aee8247 Move prun from interpreters/ to system/; And an NSH built-in appliation that can be used to execute P-Code files from the NSH command line 2014-05-09 12:30:07 -06:00
Gregory Nutt
a3e2598d90 Move P-Code execution logic from interpreters/prun to system/prun 2014-05-09 11:09:43 -06:00
Gregory Nutt
415500c6d9 Make sure apps/examples/pashello still builds; update comments; refresh configurations 2014-05-09 10:33:23 -06:00
Gregory Nutt
ed2e4a15dc Create P-Code execution helper in apps/interpreters/prun; The P-Code binary format is functional except that there are still some modularity and kernel build issues that need to be addressed. 2014-05-09 08:52:11 -06:00
Gregory Nutt
898e59f112 Couple of fixes for the latest STM32 additions / modifications. These are simple fixes dealing with conditional compile based on CONFIG items not being set. From Ken Pettit 2014-05-09 06:41:01 -06:00
Gregory Nutt
e18844de32 P-code BINFMT: Add logic to pass information from the binfmt logic to the P-code interpreter. This includes some extension to the binfmt interfaces. 2014-05-08 16:58:10 -06:00
Gregory Nutt
93629d7192 Minor fix to debug format 2014-05-08 11:18:55 -06:00
Gregory Nutt
765805234f Corrected pcode.h header file 2014-05-08 11:11:44 -06:00
Gregory Nutt
7fffa72ee5 Add a ROMFS file system for testing the P-Code binary format 2014-05-08 11:08:01 -06:00
Gregory Nutt
e2b8eb6aad Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen 2014-05-08 09:20:11 -06:00
Gregory Nutt
b5efb9dd77 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:01:14 -06:00
Gregory Nutt
7594d8b8cf Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
35e94a5be4 LIS331DL driver: Correct build dependency. Sourceforge ticket #41 from Kosma Moczek 2014-05-08 07:39:10 -06:00
Gregory Nutt
b6f264488a BINFMT: A framework to support a P-code binary format (a work in progress) 2014-05-07 13:47:52 -06:00
Gregory Nutt
d36724abbc STM32: Rename pinmap.h files to better reflect the chip naming conventions 2014-05-07 13:05:12 -06:00
Gregory Nutt
6a8a62c0c1 STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
fc6b3339a1 Nucleo-F401RE: Delay loop calibrated 2014-05-06 17:30:44 -06:00
Gregory Nutt
403b9f82d3 Ooops... last (cosmetic) changes were still in the editor 2014-05-06 15:00:39 -06:00
Gregory Nutt
b054463c9e Optimized memcpy() functin for the ARMv7-A from David Sidrane 2014-05-06 14:58:48 -06:00
Gregory Nutt
33c991dc41 STM32: Add more complication to STM32 Kconfig so the correct RNG and ETHMAC options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 11:35:13 -06:00
Gregory Nutt
ade57e4cd8 Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working. 2014-05-06 11:07:10 -06:00
Gregory Nutt
22733f9a79 The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock 2014-05-06 10:01:02 -06:00
Gregory Nutt
f2ac4d6403 STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 08:32:21 -06:00
Gregory Nutt
227cd6ca66 BINFMT: Fix an error in the symbol search function. Noted by Pelle Windestam 2014-05-06 07:49:52 -06:00
Gregory Nutt
88abca5e5e STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented 2014-05-05 17:59:07 -06:00
Gregory Nutt
f06e9dbcaa Timer driver updates from Bob Doiron 2014-05-05 14:40:19 -06:00
Gregory Nutt
84d28641b7 SAM4S Xplained Pro: Clean-up of LED usage and also some integration of new timer features. From Bob Doiron 2014-05-05 14:38:29 -06:00
Gregory Nutt
2cbb9b907c Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00
Gregory Nutt
dcc709e612 Updated Nucleo-F401RE configuration 2014-05-05 13:47:21 -06:00
Gregory Nutt
f924601fc1 The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name 2014-05-05 08:52:02 -06:00