Gregory Nutt
9ece96b6d3
Remove all traces of CONFIG_ARMV7M_STACKCHECK
2015-04-11 10:01:44 -06:00
Gregory Nutt
0a675b8ca4
STM32 changes from David Sidrane
2015-04-11 07:19:20 -06:00
Gregory Nutt
2cdc5f99b9
STM32 CAN: More places where FR instead FIR used
2015-04-09 19:30:19 -06:00
Gregory Nutt
321ccb3ba3
Fix several typos in comments
2015-04-09 16:13:03 -06:00
Gregory Nutt
95c885977a
apps/examples/ostest: Add a test for the sigprocmask, sighold, and sigrelse
2015-04-09 15:53:59 -06:00
Gregory Nutt
abea446dfa
Missing i found by David Sidrane
2015-04-09 15:16:05 -06:00
Gregory Nutt
929ea217c7
Remove executable flag from more .c and .h files
2015-04-09 08:20:57 -06:00
Gregory Nutt
fe38ca23e5
Cosmetic
2015-04-09 07:59:31 -06:00
Gregory Nutt
a93913c0f4
SAMA5 Serial: Reading IMR and disabling interrupt must be atomic
2015-04-08 15:27:31 -06:00
Gregory Nutt
35312b31f9
SAM3/4 and SAMV7 UART: The IMR register is read-only. This means that sam_restoreints() does not actually re-enable UART interrupts.
2015-04-08 15:04:10 -06:00
Gregory Nutt
9e1a7113f7
SAMA5 Serial: Fix a couple of errors backporting termios and flowcontrol
2015-04-08 14:35:04 -06:00
Gregory Nutt
27bb133294
SAM3/4 and SAMV7 Serial: Serial interrupts left disabled.
...
A side-effect of changing serial settings via TERMIOS (such as tcsetattr) is that serial interrupts were being left disabled. This is not a problem if the serial configuration is changed when there are no open references to the serial device. In that case, serial interrupts are disabled and will not be enabled enabled until the serial device is first opened. But it is fatal if the serial device is already opened and if there is a task waiting to receive data. In that case, the side-effect of disabling interrupts is fatal: That task is then left hanging with interrupts disabled.
2015-04-08 14:14:01 -06:00
Gregory Nutt
d88c9b05f2
SAMA5D Serial: Backup support for flowcontrol and termios from SAM3/4 -- UNVERIFIED
2015-04-08 14:13:08 -06:00
Gregory Nutt
ae15c6963c
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
dd3457173d
Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.
2015-04-08 06:56:43 -06:00
Gregory Nutt
c226d51c3c
STM32: Another fix to RTC magic register from David Sidrane
2015-04-06 17:21:53 -06:00
Gregory Nutt
e0a49a81e4
Add conditional logic so that people who use F1 don't have to be bother with meaningless RTC MAGIC settings
2015-04-06 16:35:56 -06:00
Gregory Nutt
8461827dcd
STM32 RTCC: Make back-up register and magic value used by RTCC configurable. From David Sidrane
2015-04-06 16:26:59 -06:00
Gregory Nutt
e1e0fc259c
Typo fixes from David Sidrane
2015-04-06 15:27:37 -06:00
Gregory Nutt
da007c4f17
Minor changes to SAMV7 USB register definition file from review
2015-04-06 13:00:48 -06:00
Gregory Nutt
5dab61f434
SAMV7 USB device: Finish option to force full speed mdoe
2015-04-06 10:07:12 -06:00
Gregory Nutt
6f9f4bd9a3
Calypso: SPI built only if CONFIG_SPI
2015-04-05 13:26:25 -06:00
Gregory Nutt
faa11b6e64
Update comments and README
2015-04-05 07:22:46 -06:00
Gregory Nutt
63b5863f33
SAMV7: Fix SDRAM initialization instabiilties by changing the order of initialization
2015-04-04 19:58:31 -06:00
Gregory Nutt
accdce0a84
SAMV7: Apparently the data sheet is wrong, SDRAM clocking must be enabled at the PMC or the SDRAM does not work! The data sheet says that there is no clock control for SDRAMC
2015-04-04 19:04:29 -06:00
Gregory Nutt
e44201ce5f
SAMV7: Fix a errort in GPIO bit encoding. Correct naming of a variable
2015-04-04 16:54:53 -06:00
Gregory Nutt
1f8ee8a5ac
SAMV7: Fix typo in some GPIO definitions
2015-04-04 14:04:58 -06:00
Gregory Nutt
fd9164a18a
More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize
2015-04-04 11:49:15 -06:00
Gregory Nutt
9ac9bcc28e
SAMV71-XULT ILI9488 LCD driver is code complete but untested
2015-04-03 16:36:58 -06:00
Gregory Nutt
841854956a
SAMV7: Add SMC register definition header file; SAMV71-Xult: Add an LCD driver. The initial commit is simply the SAVM4E-EK ILI9375 driver will bogus name changes to ILI9488.
2015-04-03 10:28:32 -06:00
Gregory Nutt
69d2d77424
Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.
2015-04-01 12:37:44 -06:00
Gregory Nutt
85b18f87b0
rch_tcinitialize() and arch_tcunitinitialize() renamed to board_tsc_setup() and board_tsc_teardown(). These are not long called directly by applications but only indirectly throught the crappy boardctl() OS interface.
2015-03-31 13:21:25 -06:00
Gregory Nutt
e5fd084af2
SAMV71-XULT: Add option to support connection of the maXTouch Xplained Pro on the 50-pin LCD connector
2015-03-31 09:01:38 -06:00
Gregory Nutt
0e9f358060
SAMV7 Ethernet: Fix a write-past-end-of-buffer and trash-the-heap problem
2015-03-29 16:45:05 -06:00
Gregory Nutt
f073092fad
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
...
In stm32_rtcc.c the up_rtcinitialize() logic doesn't work with the LSI. The check on RTC_MAGIC on the BK0R register lead to rtc_setup() call that rightfully enables the lsi clock; but the next times, when the rtc is already setup, the rtc_resume() call does NOT start the lsi clock!
The right place to put LSE/LSI initialisation is inside stm32_stdclockconfig() in stm32fxxxxx_rcc.c. Doing this I checked the possible uses of the LSI and the LSE sources: the LSI can be used for RTC and/or the IWDG, while the LSE only for the RTC (and to output the MCO1 pin)..
This change is not verifed for any other platforms.
From Leo Aloe3132
2015-03-29 15:34:48 -06:00
Gregory Nutt
d3beea967d
Cortex-M7: Add support for enabled the D-Cache in write only mode.
...
SAMV7 Ethernet: I- and D-Cache are now enabled in the netnsh/ configuration. D-Cache is enabled in write-though mode. This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
2015-03-29 14:42:03 -06:00
Gregory Nutt
ae0b0ca3fd
SAMV7/Cortex-M7: Add support for write through D-Cache. SAMV7 Ethernet look like it needs this
2015-03-29 13:09:22 -06:00
Gregory Nutt
ef1dda9207
PIC32MZ Ethernet: Add support for LAN4720A and fix IRQ namespace. From Kristopher Tate
2015-03-29 07:18:17 -06:00
Gregory Nutt
70dc3d68c5
PIC32MZ: Correct the base address of Ethernet registers. From Kristopher Tate
2015-03-29 07:15:29 -06:00
Gregory Nutt
947d1056ac
PIC32MZ: Rename Ethernet files to proper convention. From Kristopher Tate.
2015-03-29 07:10:13 -06:00
Gregory Nutt
18b26dc8e6
Clean up pointer handling to make code more readability. This re-introduces the compiler optimization problem but this is the correct thing to do. I will have to drop back from -Os to -O2.
2015-03-28 14:46:35 -06:00
Gregory Nutt
b15cd1653f
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
2015-03-28 13:09:01 -06:00
Gregory Nutt
afd737ddcc
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
2015-03-28 09:42:45 -06:00
Gregory Nutt
750fad37f0
SAMV7 Ethernet: Fix some errors in circular queue handling
2015-03-27 13:04:43 -06:00
Gregory Nutt
dd33bb14ac
Fix another typo in the modified assertion logi
2015-03-27 13:02:46 -06:00
Gregory Nutt
a8cba44e0f
Fix a typo in the last commit
2015-03-27 10:58:52 -06:00
Gregory Nutt
08d54685a1
SAMV7 Ethernet+USB Updates
2015-03-27 10:47:03 -06:00
Gregory Nutt
c6bcf3b8a5
ARMv7-M: Add logic to dump all stack usage on a crash
2015-03-27 10:45:39 -06:00
Gregory Nutt
3f0e716f48
Updated comments/README
2015-03-26 12:33:03 -06:00
Gregory Nutt
cf8f8b8c4a
SAMV6 USB updates
2015-03-26 09:49:01 -06:00
