Gregory Nutt has submitted the SGA
UVC Ingenieure has submitted the SGA
Max Holtzberg has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Augusto Fraga Giachero has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Rearchitect video driver:
- Define two video I/F(struct imgsensor_ops_s and struct imgdata_ops_s),
and support them.
- CISIF driver supports new video I/F struct imgdata_ops_s.
- ISX012 driver supports new video I/F struct imgsensor_ops_s.
- Move ISX012 driver to general driver directory.
Gregory Nutt has submitted the SGA
Daniel P. Carvalho has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
add get and set panel power interface for fb driver.
add get and set framerate interface for fb driver.
add panel information at videoinfo for fb driver.
Signed-off-by: liushuai25 <liushuai25@xiaomi.com>
Verge Aero has submitted the SGA
Anthony Merlino has submitted the SGA
Gregory Nutt has submitted the SGA
Sebastien Lorquet has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Those files are ported from the Intel/Zephyr
arduino101_firmware_source-v1.tar package
where the code was released with a compatible 3-clause BSD license
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Modified the logic of the selftest according to the ST manual.
Signed-off-by: yangjiukui <yangjiukui@xiaomi.com>
Change-Id: Id55139abf173728de4647533b26f7ab5e9a6b1fe
We found that the change caused a problem when running a VPN application.
and also confirmed that reverting the commit fixed the issue.
This reverts commit 11a842333f.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
There were some mistakes in porting to the common sensors, and they
caused the following problems.
- Hardfault by bmp280_set_interval
- Read data always zero
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit adds two new IOCTL commnands for ADC driver. Command
ANIOC_RESET_FIFO resets FIFO head and tail which causes the driver
to wait for the new data to be received. Calling this command before
reading ADC data in user space ensures that the read data are newly
sampled.
Command ANIOC_SAMPLES_ON_READ return the number of read channels in
the buffer. This can be useful in nonblocking mode when the application
needs to get the samples received before the app was started.
Both IOCTL commands are used only in generic driver section only and do
not have any effect on existing architecture specific drivers.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
to avoid blocking the main thread initialization process
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib8ab2a661ee9540bb03d9d4d851a8d8ee212404e
Summary:
- I noticed that the ntpclient does not work with gs2200m
- Finally, I found that the address family for recvfrom() is not
set correctly
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with ntpclient
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Gregory Nutt has submitted the SGA
Zilogic Systems has submitted the SGA
Uniquix Tecnologia has submitted the SGA
Michael Jung has submitted the ICLA
Alan Carvalho de Assis has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
N/A
instead of adding overrun memssage:"[truncated]\n" to the end.
Change-Id: Ie27cdf0ca902d9ba203619a95162f01222e371c5
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
drivers/sensors/hyt271.c:
* struct hyt271_dev_s: Identifier "lock_measure_cylce" was
misspelled. Fix to "lock_measure_cycle" and update all instances
in the file.
* hyt271_mr(), hyt271_cmd(), hyt271_change_addr(),
hyt271_measure_read(), hyt271_thread(): Update instances of the
renamed "lock_measure_cycle" variable and fix various typos in
comments.
1.fix crash casued by closing the handle during the reading.
2.fix set_interval fail sometime:When fakesensor was activated, csv file is not opened timely, so
the sensor->interval that set_interval() seted will be coverd by
interval form csv file.
Signed-off-by: buyuer <dingddding@163.com>
Summary:
- I noticed that NFS over TCP does not work correctly when
it tried to reconnect to the NFS server.
- This commit fixes this issue
Impact:
- gs2200m only
Testing:
- Tested with spresense:wifi_smp
- NOTE: need to update gs2200m_main.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since kernel component should use UTC instead local time
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf939e1ab0af8e577105f539d2553bc67b3b3d10
corrected setting SDMMC_DCTRL.DTMODE field for block data transfers ending on block count
and for block data transfers ending with STOP_TRANSMISSION command;
stm32_sdio: added more debug messages
* port didn't know about data-register fifo
* port didn't handle overrun condition
* driver could get stuck if interrupts were skipped due to saturation
The new configuration CONFIG_USBMSC_NOT_STALL_BULKEP avoids to go into
stall state when :
- Receiving SCSI_CMD_INQUIRY with flags or pagecode != 0
- Receiving SCSI_CMD_MODESENSE6 and return the result data shorter than
the requested data size.
Instead of stall, it just ignores the error condition.
Originally the usb driver goes into the stall under the conditions
mentioned above to inform to the USB host that the requested SCSI feature
is not supported, or the result data is shorter than the requested data
size.
But, at this moment, RP2040 USB device driver cannot handle entering and
leaving stall state of the bulk endpoints well. Once stalls, the host -
device communication stops and cannot be resumed.
I have investigated to solve the issue and found that the existing
RP2040 USB device driver implementation, TinyUSB
(https://github.com/hathach/tinyusb) mass-storage class driver doesn't
enter the stall state like the treatment of this patch.
So, I introduce this new configuration as the RP2040 workaround.
In the future, when the RP2040 USB device driver is fixed and can handle
the bulk endpoint stall correctly, this patch should be reverted.
since the caller is free not to monitor any event
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib957be1b1b5a686faea0196bc9069e0908a492eb
Summary:
- I thought this cs is needed to avoid data corruption
- For example, while executing uart_xmitchar() in the interrupt
handler on CPU0, an application running on CPU1 can call
uart_putxmitchar() via write()->uart_write().
- In this case, taking xmit.sem in uart_write() will wait for CPU0
to finish uart_xmitchar() because CPU0 has already taken a cs
in uart_xmitchar() then nxsem_wait() on CPU0 takes a new cs
inside (and release the cs when returning but it's OK)
- Then uart_write() on CPU1 disables UART TX, so uart_xmitchar()
on CPU0 will not be called while executing uart_write() on CPU1.
- So this critical section in uart_putxmitchar() can be removed.
Impact:
- None
Testing:
- Tested with spresense:wifi_smp, esp32-devkitc:smp
Reported-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit converts data to the physical address for DMA transfer.
Impact:
- cxd56.c only
Testing
- Tested with nxplayer and nxrecorder
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The patch is related to: commit 5f7c98b6e1
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Mon May 17 22:38:22 2021 +0800
drivers/syslog: Remove emergstream implementation and caller
since emergstream always call syslog_force, but syslog_force is designed
for the interrupt context, and then doesn't mean any emergency thing.
On the other hand, emergstream has other bad side effect:
1.Can't output to file or dev channel
2.Can't work well with the interrupt buffer
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
by ramlog_initbuf();
Algorithm: Scan the entire ramlog buffer, the position of the head
is the first byte is not empty and second byte is empty. The position
of the tail is the first byte is empty and second byte is not empty.
Change-Id: Ieb9161bd670481cd335e9a901287cd5e589f0849
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- During Wi-Fi stress test, sometimes ASSERT() happens in gs2200m.c
- This commit removes the ASSERT() but calls _remove_all_pkt()
for a workaround.
Impact:
- None
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
When creating the next chain of directory entries, (1) add the position
of next entry to the current sector, and then (2) update the sector of
next entry. If the power is turned off between (1) and (2), the next
entry will not be found, and the chain of directory entries will break.
It causes the SmartFS file system corruption, and we will not be able
to add files.
To avoid this issue, in checking the filesystem by smart_fsck_directory,
if the sector of next entry does not exist, update the sector of
directory entry to invalidate the field of next entry.
since emergstream always call syslog_force, but syslog_force is designed
for the interrupt context, and then doesn't mean any emergency thing.
On the other hand, emergstream has other bad side effect:
1.Can't output to file or dev channel
2.Can't work well with the interrupt buffer
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
specified the name of remote proc(rpmsg server)
Change-Id: I0086bb43727a2bbb5e68f88907b5e4608182ef9c
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
N/A
specified the name of remote proc(rpmsg server)
Change-Id: Ie270d651071e87a40a80ab489597ae18db9814f0
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
