Gregory Nutt
|
b1d63af30e
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:15:52 -06:00 |
|
Gregory Nutt
|
0fb3f7803c
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
025e5bc3a5
|
SAMA5D3X-EK NSH: Refresh configuration
|
2014-07-31 11:13:10 -06:00 |
|
Gregory Nutt
|
afff17a8ee
|
Add short document for running the NxWM demo
|
2014-07-31 08:18:07 -06:00 |
|
Gregory Nutt
|
928adfcc1a
|
SAMA5D4-EK NxWM: The USB keyboard is now the default input device
|
2014-07-30 17:37:02 -06:00 |
|
Gregory Nutt
|
7e4e5ee543
|
dd support for a USB keyboard as the NxConsole and text widget input. Not fully functional as of this initial check-in. Basic functionality is there, but there are conditions were the keyboard gets lost.
|
2014-07-30 17:01:51 -06:00 |
|
Gregory Nutt
|
40e27add0b
|
Costmetic: Update TODO list, README files, refreshed configuration, updated comments
|
2014-07-30 14:26:50 -06:00 |
|
Gregory Nutt
|
2b0c56a31d
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
df57bd319d
|
Updated README file, cosmetic changes to comments and debug output
|
2014-07-30 10:19:09 -06:00 |
|
Gregory Nutt
|
812db2e5ae
|
Update TODO listi and README
|
2014-07-29 20:02:34 -06:00 |
|
Gregory Nutt
|
9652872800
|
The SAMA5D4-EK NSH and NxWM configurations now have the auto-mounter configured to automatically mount the FAT file system on HSMCI0 at /mnt/sdcard
|
2014-07-29 16:36:15 -06:00 |
|
Gregory Nutt
|
47aa0e0baf
|
Cosmetic updates to comments and README files and some naming
|
2014-07-29 16:35:47 -06:00 |
|
Gregory Nutt
|
9414e97f01
|
Minor warning/latent bug clean-up of auto-mounter logic
|
2014-07-29 16:35:17 -06:00 |
|
Gregory Nutt
|
42b28ba383
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
d7432c4b07
|
Update ChangeLog
|
2014-07-29 12:52:21 -06:00 |
|
Gregory Nutt
|
17a9b2b4be
|
SAMA5: Poll USB keyboard at a higher rate for better response
|
2014-07-29 08:57:35 -06:00 |
|
Gregory Nutt
|
ff0de0d603
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
2f3e83e793
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
Gregory Nutt
|
00c7b4765f
|
SAMA5D4-EK: Disable PMIC workaround... it does not work
|
2014-07-28 17:48:55 -06:00 |
|
Gregory Nutt
|
f632aef535
|
Fixes to last SAMA5 PMIC checkin
|
2014-07-28 17:09:37 -06:00 |
|
Gregory Nutt
|
5c5477b981
|
SAMA5D4-EK: Add logic to disable the faulty PMIC. This must be done with JP23 open. It is perfomed only from the DRAMBOOT loader
|
2014-07-28 16:34:19 -06:00 |
|
Gregory Nutt
|
8e20aae28f
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
e436b0bc96
|
Updated README
|
2014-07-25 10:03:01 -06:00 |
|
Gregory Nutt
|
97f47a0f4a
|
Port ADC, DAC, and PWM logic from the configs/zkit-arm-1769. From Max.
|
2014-07-24 15:44:08 -06:00 |
|
Gregory Nutt
|
33c49e70c6
|
AMA5D4-EK NxWM: Configuration refreshed
|
2014-07-24 15:06:19 -06:00 |
|
Gregory Nutt
|
bc6b713a37
|
NxWM: Beginning integration of NxPlayer into Nxwm::MediaPlayer. Gets handle, sets device, and releases handle. Lots more to be done
|
2014-07-23 18:19:00 -06:00 |
|
Gregory Nutt
|
d3eb13ed66
|
SAMA5D4-EK NSH: Enable the command line media player in the NSH configuration as well (still does not work, however).
|
2014-07-23 15:33:54 -06:00 |
|
Gregory Nutt
|
3e49c4c510
|
SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled
|
2014-07-23 15:20:54 -06:00 |
|
Gregory Nutt
|
02ebeddeb0
|
Audio: Add a NULL audio device that can be used to simply unit-level testing of audio decoders
|
2014-07-23 10:12:32 -06:00 |
|
Gregory Nutt
|
8edc57137c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
e20182c2fb
|
Rename pcm_decode.h to pcm.h since it will hold more than just decoding definitions. Fix some porting errors like idbg should auddbg, etc. Add wav file header and a few low-level wav utilities.
|
2014-07-22 15:54:56 -06:00 |
|
Gregory Nutt
|
2ad6e4452b
|
Add new framework for the PCM decoder. It is now a 'front end' for lower-level drivers like the WM8904 that performs the PCM decoding from end
|
2014-07-22 11:54:13 -06:00 |
|
Gregory Nutt
|
36ae0dfa42
|
Update README
|
2014-07-22 09:25:38 -06:00 |
|
Gregory Nutt
|
09f846a56d
|
Make sure that all sim configurations have CONFIG_SIM_M32 undefined. That is probably the wrong default setting, but we need to be consistent above all
|
2014-07-21 18:44:19 -06:00 |
|
Gregory Nutt
|
2491fe4ac0
|
sim/nettest, updated defconfig file
|
2014-07-21 18:41:34 -06:00 |
|
Gregory Nutt
|
1451690569
|
Updated README
|
2014-07-21 18:38:41 -06:00 |
|
Gregory Nutt
|
dbec0d5390
|
SAMA5D4-EK: HSMCI0 must use XDMAC0 (or made unsecure)
|
2014-07-21 17:54:37 -06:00 |
|
Gregory Nutt
|
1518adff14
|
WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled
|
2014-07-20 09:17:36 -06:00 |
|
Gregory Nutt
|
5abc23b0a8
|
The WM8904 audio driver is mostly code complete and ready to begin initial testing
|
2014-07-19 18:52:58 -06:00 |
|
Gregory Nutt
|
c413c03b6d
|
SAMA5D4-EK: Add PCK pin disambiguation
|
2014-07-19 13:56:29 -06:00 |
|
Gregory Nutt
|
54986c41d8
|
SAMA5 PCK: Add support for the slow clock as the PCK clock source
|
2014-07-19 13:55:08 -06:00 |
|
Gregory Nutt
|
f240f7e513
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
414fb2b154
|
SAMA5D4-EK: Add WM8904 initialization logic
|
2014-07-19 11:58:53 -06:00 |
|
Gregory Nutt
|
17fdc797ed
|
WM8904: A few initial definitions for for the SAMA5D4-EK
|
2014-07-17 17:57:57 -06:00 |
|
Gregory Nutt
|
173c49d3fd
|
SAMA5D4-EK NxWM Configuration: Increase number of preallocated watchdogs and don't save child status (it is not being reaped)
|
2014-07-17 17:56:36 -06:00 |
|
Gregory Nutt
|
117765da5e
|
NxWM: Increase default priority of mouse and keyboard listener threads. Does not seem to make any difference but still seems like a good idea
|
2014-07-17 15:06:05 -06:00 |
|
Gregory Nutt
|
3feb03566c
|
NxWM::CApplicationWindow: Created the custom font for the toolbar title, but never used it.
|
2014-07-17 13:38:37 -06:00 |
|
Gregory Nutt
|
af65bd6732
|
NxWidgets::CGlyphSliderHorizontal: No longer uses a hard-coded slider height; the slider height is now provided as a parameter, replacing the widget height which is now calculated from the glip image height
|
2014-07-17 12:12:02 -06:00 |
|
Gregory Nutt
|
bb6ba5198b
|
Rename CONFIG_NX_MOUSE to CONFIG_NX_INPUT, then add CONFIG_NX_XYINPUT_MOUSE and CONFIG_XYINPUT_TOUCHSCREEN
|
2014-07-16 16:31:31 -06:00 |
|
Gregory Nutt
|
f28b632a2c
|
NxWM::CMediaPlayer: Convert CLabel to a CListBox
|
2014-07-16 14:11:02 -06:00 |
|