Commit Graph

35 Commits

Author SHA1 Message Date
Gregory Nutt
a8d7772ad6 Update README files, Kconfig help comments, and make the network monitor not EXPERIMENTAL 2014-08-18 07:24:47 -06:00
Gregory Nutt
eef608b942 Update README files 2014-08-12 10:01:12 -06:00
Gregory Nutt
1787b3e600 SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected 2014-08-11 14:29:43 -06:00
Gregory Nutt
c6273d083d Updated README files 2014-08-10 20:02:45 -06:00
Gregory Nutt
c7a51f4ef1 Cosmetic changed, updated README files, improved comments 2014-08-10 13:11:31 -06:00
Gregory Nutt
b39b227e2a Update README files 2014-08-10 11:34:20 -06:00
Gregory Nutt
7b9c44101d SAMA5D3 HSMCI: TX DMA is again disabled 2014-08-05 07:07:39 -06:00
Gregory Nutt
276cc44878 SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller. 2014-07-30 11:20:06 -06:00
Gregory Nutt
7b1b915226 SAMA5D4: Add auto-mounter support for HSMCI0 2014-07-29 15:34:31 -06:00
Gregory Nutt
c79f86c72c SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations 2014-07-23 07:58:10 -06:00
Gregory Nutt
0eb1666cb0 NET: Rename uiplib/UIPLIB to netlib/NETLIB 2014-07-02 16:04:25 -06:00
Gregory Nutt
339c8edf0e SAMA5D4-EK: NSH configuration now supports the RTC 2014-06-29 07:40:37 -06:00
Gregory Nutt
0443aa9947 SAMA5D4-EK: NSH confuration now has FAT/ROMFS, /dev/zero, /dev/random via TRNG, an NSH startup script, and a RAM disk at /tmp 2014-06-28 16:11:41 -06:00
Gregory Nutt
2cf637692a SAMA5D4-EK: Update pins used by HSMCI 2014-06-11 14:45:01 -06:00
Gregory Nutt
e0a07125c8 SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later 2014-06-10 17:40:25 -06:00
Gregory Nutt
1f64e9c5b9 SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently 2014-06-09 12:16:16 -06:00
Gregory Nutt
50893fd36c SAMA5: Cosmetic clean-up of README files 2014-06-04 17:02:30 -06:00
Gregory Nutt
495b190e50 SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC 2014-06-04 12:04:24 -06:00
Gregory Nutt
9efb83c5ab Updated README files 2014-04-16 16:41:47 -06:00
Gregory Nutt
e21212f2b4 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
Gregory Nutt
cd6039933e SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane. 2014-04-11 15:57:35 -06:00
Gregory Nutt
3e085ec0af Long needed clean up of DNS resolver for coding style and naming conventions 2014-04-11 12:25:32 -06:00
Gregory Nutt
ac3865fd89 Updated README files and comments 2014-04-07 07:43:28 -06:00
Gregory Nutt
91c9e60e14 SAMA5D3 Xplained: Delay loop calibrated 2014-04-03 16:38:36 -06:00
Gregory Nutt
c9fc03d52f If LOWVECTORS is selected, then we need to clear the VBAR register. A bootloader may have left the VBAR in an bad state 2014-04-03 13:09:30 -06:00
Gregory Nutt
6201df6463 Updated comments and README 2014-04-02 09:03:29 -06:00
Gregory Nutt
0d66ba9c00 SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader 2014-04-02 09:03:27 -06:00
Gregory Nutt
b3daf84b12 Top level make will now generate a U-Boot uImage file 2014-04-01 11:56:58 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
3d8cbb415c Cosmetic update to comments and README files 2014-03-31 17:25:39 -06:00
Gregory Nutt
a44a4444e2 Cosmetic updates to comments and README files 2014-03-31 15:10:15 -06:00
Gregory Nutt
85b0a1a544 Costmetic fixes to README and some comments 2014-03-30 11:34:18 -06:00
Gregory Nutt
fa5988bf7b Add instructions for running NuttX from NAND or TFTP 2014-03-30 10:25:44 -06:00
Gregory Nutt
8bc70e38ab SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration 2014-03-29 15:05:09 -06:00
Gregory Nutt
09fb2a1893 Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished) 2014-03-28 15:20:26 -06:00