drivers/timers/rtc.c: Support signal notification through SIGEV_THREAD
drivers/input/ajoystick.c: Support signal notification through SIGEV_THREAD
drivers/input/djoystick.c: Support signal notification through SIGEV_THREAD
drivers/input/button_upper.c: Support signal notification through SIGEV_THREAD
drivers/sensors/zerocross.c: Support signal notification through SIGEV_THREAD
drivers/wireless/ieee802154: Support signal notification through SIGEV_THREAD
drivers/lcd/ft80x.c: Support signal notification through SIGEV_THREAD
Improvements for STM32 PWM
arch/arm/src/stm32/stm32_pwm: fix polarity and IDLE state configuration for advanced timer PWM
include/dsp.h: raise error if math.h not present
Approved-by: GregoryN <gnutt@nuttx.org>
Squashed commit of the following:
drivers/lcd/tda19988.c: Numerous changes for a clean compilation.
drivers/lcd/tda19988: Bring in the final pieces from the FreeBSD TDA19988 driver. The driver is now code complete.
drivers/lcd/tda19988.c: Flesh on EDID read logic (still not complete). Add unlink shutdown logic.
drivers/lcd/tda19988.c: Add logic to read one EDID block.
drivers/lcd/tda19988.c: Add tda19988_read_edid() interface. Flesh read() and seek() methods.
drivers/lcd/st7032.c: Fix another error in seek method: Does not account for negative offsets!
drivers/lcd/tda19988.c: Add basic IOCTL infrastructure to support configuratin the video mode. Mostly just a framework for now.
drivers/lcd/tda19988.c: Add more register definitions. Encode page+address in the same was as FreeBSD.
drivers/lcd/tda19988.c: Add support for CEC messaging.
drivers/lcd/tda19988.c: Implement the unlink method. No IOCTLs defined yet.
drivers/lcd/tda19988.c: Add placeholders for missing character driver methods.
drivers/lcd/tda19988.c: Trivial interface improvement to permit reading multiple TDA19988 registers.
drivers/lcd/tda19988.c: Feeble start of TCA19988 drivers. Consists of lower half interface definition and some I2C helper functions. Nothing more.
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
fs/littlefs: Fix some compilation errors.
fs/littlefs: Brings code a little closer to NuttX coding standard. Not 100%, but closer.
fs/littlefs: Convert all C++ style comments to C comments.
Author: lihaichen <li8303@163.com>
fs/littlefs: Adds port of the mbed littlefs.
depends on !DISABLE_MOUNTPOINT && MTD_BYTE_WRITE
register_mtddriver("/dev/w25", mtd, 0755, NULL);
mount("/dev/w25", "/w25", "littlefs", 0, NULL);
1. lost data when receiving buffer is full;
2. low-water mask implement issue;
3. re-flush cdc buffer when enabling
4. serial dma is conflict with cdc , modify the serial.h
1. Configurable option to use named config items instead of enumerated ID/Instance numbers.
2. Ability to iterate through the existing configdata items in the /dev/config device.
3. Ability to "unset" a configdata item.
4. Ability to perform "flash_eraseall" on the /dev/config device.
- Avoids the use of up_aesinitialize() entirely, which resolves dependency problems, because this function does not make sure that an actual hardware aes implementation was made available: each SoC is now responsible to ensure the AES hardware is initialized before first use. This applies to lpc43xx, stm32 and sam34.
- Remove definitions of the NEVER used aes_init and aes_update operations. The new AES API will be more suitable.
- Change the unusual naming in stm32 (avoiding possible naming clashes)
- Change the unusual naming in sam34 (avoiding possible naming clashes)
- Add some FAR to pointers and enforce the 80 col limit in stm32 and sam
Master
configs/nucleo-f334r8: add example for the SPWM generation (custom STM32 PWM usage)
arch/arm/src/stm32/stm32_pwm: fix compilation errors if the upper-half PWM logic is not enabled
include/nuttx/drivers/pwm.h: remove dependency on CONFIG_PWM for the upper-half PWM header. This allows compilation for the lower-level PWM drivers even if the upper-half PWM logic is not used.
arch/arm/src/stm32/stm32_tim.c: fix compilation error if there is no TIM8
configs/nucleo-f334r8/highpri: remove the upper-half ADC from configuration
configs/nucleo-f302r8/highpri: remove the upper-half ADC from configuration
configs/stm32f429i-disco/highpri: remove the upper-half ADC from configuration
Approved-by: GregoryN <gnutt@nuttx.org>
fs/procfs/fs_procfsproc: Extended the process ID ProcFS output to show per-thread maximum time for pre-emption disabled and maximum time within a critical section.
sched/sched/sched_critmonitor.c: Adds data collection logic in support of monitoring critical sections and pre-emption state.
The user of this invalidation are mmcsd_sdio currently. The mmcsd_sdio driver makes calls for dcache invalidation through the chip specific architecture function SDIO_DMARECVSETUP(). I changed the arch/arm/stm32f7 chips to use arch_invalidate_dcache_by_addr() instead of arch_invalidate_dcache().
This commit includes additional changes to mmcsd_sdio.c. I created SDIO_DMADELYDINVLDT() (DMA delayed invalidate) to invalidate store-into mode dcaches after the DMA transfer. I have been using SDIO_DMADELYDINVLDT() for several weeks now and it has fixed the problems that I previously reported regarding non-cache aligned buffer invalidation errors (for my store-through dcache). However, it does not permit use of unaligned DMA buffers for store-into mode dcaches.
SDIO_DMADELYDINVLDT() is a NoOp unless the chip specific Kconfig file selects CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT. I have modified all the stm32f7 chips to select it.
The MLD implementation did not follow the RFC correctly when it is the Querier. The Querier should use a general query and get query messages from all members of all groups. This would be driven by a single timer per sub-nset since all groups are queried at once. Instead, the design used a Multicast Address Specific Query with one timer per group and ignores groups that we are not members of.
Similary, the MLDv1 compatibility timer should be a single, separate timer, not a per-group timer.
net/mld: Group may be NULL when sending a general query
include/nuttx/clock.h: Fix uptime wrong if DEBUG_FEATURES and SCHED_TICKLESS enabled
include/nuttx/arch.h: fix CONFIG_ARCH_INTERRUPTSTACK not defined warning
include/nuttx/audio/audio_i2s.h: Fix warning: struct i2s_dev_s declared inside parameter list
RNDIS composite support
* NuttX usb/composite.h: Forward-declare composite_devdesc_s.
This avoids "error: conflicting types for 'composite_initialize'"
on some versions of GCC. Because of the cross-inclusion between
usbdev.h and composite.h, the full declaration is not always
available.
* NuttX: USB Composite driver: Fix strid comparison
The last string ID used by composite driver is 4, and
the number of IDs used is 5 (0..4). The comparison
strid <= COMPOSITE_NSTRIDS caused composite driver to
reply with -EINVAL for id 5, even though it should be
available for subdevices to use.
* NuttX: RNDIS USB driver: Add support for composite configuration.
Approved-by: GregoryN <gnutt@nuttx.org>
These Microsoft-only descriptors help in loading the correct driver on Windows.
They are especially helpful to give libusb access to a custom device without
having to manually configure/install WinUSB driver.
With this change DFU interface works automatically on
Windows 10 with dfu-util 0.9 and libusb 1.0.22. On Windows 7
it still appears to need driver installation.
1. Move exepath_*() related code to libc/misc
1. Rename exepath_ to envpath_
2. Rename BINFMT_EXEPATH to LIB_ENVPATH
libs/libc/modlib: Add pre module library symbol table support
net/mld: Fix a couple of places where I forgot to unlock the network in the previous commit.
net/mld: Implement 'Other Querier Present Timer'. This timer is used to revert to Querier mode if there is no other querier on the network. Also, fix some naming: The Done message is not just Version 1 but is used with Version 2 as well.
net/igmp: Back out some blind, backported improvements to IGMP from MLD. There are too many subtle differences in the protocols for this to be safe.
net/mld: Checksum calculation needs to know the full size of the IPv6 header, including the size of the extension headers. The payload size in the IPv64 header must include the extension headers (not considered part of the header in this case). Fixes a few additional errors in size, endian-ness and checksum calculations. Wireshark now reports the the outgoing Report has a good checksum.
net/mld/mld_query.c: Add a cast to assure that the left shift does not overflow.
net/mld: More updates from comparison with roughly leveraged code and the MDL RFCs 2710 and 3810.
net/mld: More updated from comparison with roughly leveraged code and the MDL RFCs 2710 and 3810.
net/mld: Beginning comparison with roughly leveraged code and the MDL RFCs 2710 and 3810.
include/nuttx/net/ipv6ext.h: Fix some terminology: Hop-by-hop, not Hop-to-hop or Hop2hop.
net/devif/ipv6_input.c and net/icmpv6/icmpv6_input.c: Add logic to skiip over the variable number of IPv6 extension headers that may be present between the IPv6 header and the transport layer header. The extension headers are simply ignored. This is necessary because with MLD, certain incoming messages may have, at a mimimum, a Router Alert Hop-by-hop extension header.
net/inet/ipv6_setsockopt.c: Implement the IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP socket options.
net/mld: The MLD logic now compiles and is much less toxic. It still is not a proper MLD implementation: (1) It is basically a port of IGMP, tweaked to work with IPv6 and ICMPv6 MLD messages, (2) it needs a proper analysis and comparison with RFC 3810, and (3) it is completely untested. For this reason, it will remain EXPERIMENTAL for some time.
net/mld: Add some missing macros, more fixes related to IPv6 vs IPv4 types,
net/mld: More compilation cleaning. Most fixups for IPv6 vs IPv4 types.
net/mld: Hook crudely converted .c files into build system and resolve a few of the many, many compilation/design problems.
net/mld: Add support for MLD statistics.
net/mld: Hook in MLD poll and packet transmission logic.
net/mld: Change references to IPv4 definitions to IPv6 definitions; Remove mld_input() since MLD piggybacks on ICMPv6 input. Add functions to catch MLD messages dispatched by ICMPv6 input logic.
net/mld: As a starting point, copy all net/igmp/*.c files to net/mld/. and change all occurrences of igmp (or IGMP) to mld (or MLD).
net/mld: More compilation cleaning. Most fixups for IPv6 vs IPv4 types.
net/mld: Hook crudely converted .c files into build system and resolve a few of the many, many compilation/design problems.
net/mld: Add support for MLD statistics.
net/mld: Hook in MLD poll and packet transmission logic.
net/mld: Change references to IPv4 definitions to IPv6 definitions; Remove mld_input() since MLD piggybacks on ICMPv6 input. Add functions to catch MLD messages dispatched by ICMPv6 input logic.
net/mld: As a starting point, copy all net/igmp/*.c files to net/mld/. and change all occurrences of igmp (or IGMP) to mld (or MLD).
Adds definitions for IPPROTO_IPV6 socket options to netinet/in.h Adds missing fields to sockaddr_in6. Adds struct ipv6-mreq.
These changes all follow the opengroup standard for netinet/in.h
Approved-by: GregoryN <gnutt@nuttx.org>
Squashed commit of the following:
fs/spiffs: Fix last compilation issue. Now compiles without error. It is still not quite ready for testing as there is additional code review that must be be performed. It is now marked as EXPERIMENTAL so that it can be brought onto the master branch with little risk.
fs/spiffs: Remove some dead code.
fs/spiffs: Weak start of analysis of spiffs_nucleus.c. Renamed to spiffs_core.c
fs/spiffs: Rename spiffs_nucleus.c to spiffs_core.c
fs/spiffs: Remove spiffs_config.h. All configuration settings are now available in the SPIFFS Kconfig options.
fs/spiffs: Finished review, update, and repartitioning of spiffs_check.c. Added spiffs_check.h.
fs/spiffs: Finished review, update, and repartitioning of spiffs_cache.c. Added spiffs_cache.h.
fs/spiffs: Clean up some defines used in debug output statements.
fs/spiffs: Finished review, update, and repartitioning of spiffs_gc.c. Added spiffs_gc.h.
fs/spiffs: Now that VFS interface is completed, I have begun the long march of repartitioning the remaining functionality, reviewing logic, identifying dead code, and cleaning up loose ends.
fs/spiffs: Initial integration of MTD interface, replacing the SPIFFS native flash interface. Lots of open issues such as the use of pages vs. blocks vs. erase blocks and units of addresses, offsets, and lengths that are passed in function calls. Remove SPIFFS_USE_MAGIC support. That option (which default to OFF anyway), wrote a magic value at the beginning of every sector and support verifiable identification of the file system. It was not being and used and removing it makes life simpler.
fs/spiffs: Remove semaphore lock on the file object structure. Ultimately, the file access must modify the volume and access the volume structue which also has a exclusivity lock. So use of the volume lock alone should be sufficient.
Integrated the SPIFFS rename logic into the NuttX VFS. Removed non-standard application calls or convert them to IOCTL commands. These were converted to IOCTL commands: (1) integrity check, (2) garbage collection, and (3) format flash. These were removed: (1) Integrity check callback. These provided a lot of good information about the state of the file system, but such callbacks are not compatible with a POSIX compliant file system. (2) Index maps. The index maps were a performance improvement feature. The user could provide the memory and request that a region of a a file use that memory for improved lookup performance when accessing parts of the file. The fallback is the less performance lookup by traversing the FLASH memory. (3) Removed the quick garbage collection interface (the code is still used internally). Only the full garbage collection is available to the user application via IOCTL.
configs/sim/spiffs: A simulator configuration to use for testing SPIFFS.
fs/spiffs: Integrate SPIFFS logic into NuttX VFS bind() and unbind() methods.
fs/mount/fs_mount.c: Add SPIFFS to the list of drivers that require MTD vs block drivers.
fs/spiffs: Trivial changes, mostly from analysis of how to integrate the rename() VFS method.
fs/spiffs: Connect NuttX VFS unlink method to the SPIFFS_remove() function. Lots of name-changing.
fs/spiffs: Remove non-standard errno support. Remove bogus SPIFFS_LOCK() and SPIFFS_UNLOCK() macros.
fs/spiffs: Add NuttX VFS implementation for statfs() method. Clean up some of the accumulating compilation problems.
fs/spiffs: Add stat(), truncate() methods. Dummy out unsupport mkdir() and rmdir() methods.
fs/spiffs: Replace some of the custom error numbers with standard error numbers.
fs/spiffs: Hooks read(), write(), fstat(), ioctl(), opendir(), closedir(), rewindif(), and readdir() into the NuttX VFS.
fs/spiffs: Beginning the organization to work with the NuttX VFS. Lots of things are get broken!
fs/spiffs: Add spiffs.c which will be the interface between SPIFFS and NuttX. No very close at present, however.
fs/spiffs: Clean up some compile problems introduced by coding standard changes.
fs/spiffs: A little closer to NuttX coding standard.
fs/spiffs: Ran tools/indent.sh against all files. Closer to NuttX coding standard, but needs a lot more effort to be fully compliant.
fs/spiffs: This commit brings in version 0.3.7 of Peter Anderson's SPIFFS. The initial commit includes the core FS files (with some definitions destributed to their correct header files) and hooks into the build system.
fs/driver and fs/mount: Add mount() support for file systems that require MTD drivers (vs. block drivers).
fs/drivers: Add support for named MTD drivers in the psuedo file system. This will, eventually, allow us to mount file systems that need MTD drivers without having to fake an intervening block driver.
Pull request for mtd/progmem refactoring.
* mtd/progmem: change up_progmem_npages to up_progmem_neraseblocks
page is a unit for read/write operation.
eraseblock is a unit for erase operation.
up_progmem_npages is a little bit confusing because it returns number of
erase blocks in flash memory. This patch changes up_progmem_npages to
up_progmem_neraseblocks. There is no logical change.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* mtd/progmem: up_progmem_erasesize.
Change argument name to be more readable.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* mtd/progmem: up_progmem_eraseblock
Change up_progmem_erasepage to up_progmem_eraseblock.
eraseblock is more readable name than erasepage.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* mtd/progmem: change up_progmem_eraseblock's return value.
up_progmem_eraseblock erase a block. so it's better to return the erase block
size than page size.
Signed-off-by: EunBong Song <eunb.song@samsung.com>
* arm/cortex-r : fix wrong cp15_flash_dcache.
change mcrne to mcr for unconditional dcache.
Signed-off-by: sungduk.cho <sungduk.cho@samsung.com>
Approved-by: GregoryN <gnutt@nuttx.org>
many locations: Change occurences of open() followed by file_detach() to file_open(). Change most non-controversion calls to open() to nx_open().
fs/inode/fs_fileopen.c: Flesh out file_open() with some interim, placeholder logic.
fs/inode/fs_fileopen.c: Add a framework for a file_open() implementation (no real logic in place yet).
fs/vfs/fs_open.c: Add nx_open() which is the same as open() except that it does not create a cancellation point nor does it modify the errno variable.
