Commit Graph

63 Commits

Author SHA1 Message Date
meijian
98d5e118c0 [icmpv6] fix resource leak of icmpv6
Signed-off-by: meijian <meijian@xiaomi.com>
2024-05-14 16:25:56 +08:00
zhanghongyu
0cd893fb5a icmpv6_neighbor: Simply skip IPv6 conflict detection on L3 Nic
Otherwise, the IP address is always considered to conflict, and the ipv6
address cannot be effectively obtained.
Later we will look at how to perform conflict detection on L3 network cards

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2024-04-29 17:44:40 +08:00
Zhe Weng
5eb08a4b33 net: Fix minor coding problems
Fix minor problems when reading codes:
- icmpv6_autoconfig: Call net_unlock before return
- pkt_sendmsg: Return error for types other than SOCK_RAW

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2024-02-23 10:34:23 -03:00
Zhe Weng
2b9633e652 net: Support multiple IPv6 address per netdev
Note that user-space related code, like procfs and lifreq related ioctl commands, are not touched in this commit.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-11-07 19:30:36 +08:00
Zhe Weng
d98bfc3e49 net/icmpv6: Fix icmpv6_neighbor for link-local address
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.

The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-08-11 02:00:39 +08:00
Xiang Xiao
a851ad84c3 net: consistent the net sem wait naming conversion
to prepare the new mutex wait function

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-15 12:31:30 -03:00
chao an
8a63d29c6e net/devif_poll: optimize device buffer alloc in txpoll
Allocate the device buffer only if the protocol really need to send data.
not all protocols require the driver to prepare additional iob before
sending, especially UDP, each iob reserves l2/l3 header in advance
after prepare write buffer, net device could reuse this entry to send directly

Signed-off-by: chao an <anchao@xiaomi.com>
2023-01-13 16:41:10 +08:00
anjiahao
5724c6b2e4 sem:remove sem default protocl
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2022-10-22 14:50:48 +08:00
chao.an
162fcd10ca net: cleanup pvconn reference to avoid confuse
More reference:
https://github.com/apache/incubator-nuttx/pull/5252
https://github.com/apache/incubator-nuttx/pull/5434

Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 20:58:11 +08:00
Huang Qi
e4e3208180 Replace all strncpy with strlcpy for safety
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-08-25 13:38:36 +08:00
Petro Karashchenko
9551de7115 net: use HTONS, NTOHS, HTONL, NTOHL macro in kernel code
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-01-18 10:59:47 +01:00
Alexander Lunev
36fbedcbfc net/devif/devif_callback.c: corrected the connection event list to work as FIFO instead of LIFO.
In case of enabled packet forwarding mode, packets were forwarded in a reverse order
because of LIFO behavior of the connection event list.
The issue exposed only during high network traffic. Thus the event list started to grow
that resulted in changing the order of packets inside of groups of several packets
like the following: 3, 2, 1, 6, 5, 4, 8, 7 etc.

Remarks concerning the connection event list implementation:
* Now the queue (list) is FIFO as it should be.
* The list is singly linked.
* The list has a head pointer (inside of outer net_driver_s structure),
  and a tail pointer is added into outer net_driver_s structure.
* The list item is devif_callback_s structure.
  It still has two pointers to two different list chains (*nxtconn and *nxtdev).
* As before the first argument (*dev) of the list functions can be NULL,
  while the other argument (*list) is effective (not NULL).
* An extra (*tail) argument is added to devif_callback_alloc()
  and devif_conn_callback_free() functions.
* devif_callback_alloc() time complexity is O(1) (i.e. O(n) to fill the whole list).
* devif_callback_free() time complexity is O(n) (i.e. O(n^2) to empty the whole list).
* devif_conn_event() time complexity is O(n).
2021-09-18 21:01:39 -05:00
Xiang Xiao
5b2a17b892 Include assert.h in necessary place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-06-08 13:06:08 -07:00
Gregory Nutt
57bc329aac Run nxstyle all .c and .h files modified by PR. 2020-05-17 14:01:00 -03:00
Gregory Nutt
a569006fd8 sched/: Make more naming consistent
Rename various functions per the quidelines of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions

    nxsem_setprotocol -> nxsem_set_protocol
    nxsem_getprotocol -> nxsem_get_protocol
    nxsem_getvalue -> nxsem_get_value
2020-05-17 14:01:00 -03:00
Gregory Nutt
98f431d8d8 net/: Run all .c files under net/ through tools/nxstyle and fix all resulting complaints. 2020-01-11 13:41:33 -03:00
Xiang Xiao
5c5c08efcd network: simplify the timeout process logic
1.Consolidate absolute to relative timeout conversion into one place(_net_timedwait)
2.Drive the wait timeout logic by net_timedwait instead of devif_timer
This patch help us remove devif_timer(period tick) to save the power in the future.

Change-Id: I534748a5d767ca6da8a7843c3c2f993ed9ea77d4
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-01-11 08:24:49 -06:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Xiang Xiao
b4e7ca5aac net/icmpv6/icmpv6_autoconfig.c: cmpv6_autoconfig() error handling must not overwrite overwrite the error code. 2019-09-20 12:51:37 -06:00
Xiang Xiao
6c484847d5 net/: Decouple autoconfig and icmpv6 socket to avoid the invalid kconfig combination. 2019-09-20 12:45:05 -06:00
Bernd Walter
5d01ce6c58 net/icmpv6/icmpv6_autoconfig.c: Use ntohs() to convert IPv6 address from network to host order int network debug output. 2019-07-06 07:02:51 -06:00
anchao
c9b73f5139 net/icmp and icmpv6: Bind icmp callback from device to connection. Resolves the issue that bind() could not be called before send() 2019-03-19 09:43:32 -06:00
Gregory Nutt
68a115aed9 net/icmpv6/icmpv6_autoconfig.c and icmpv6_rnotify.c: Don't take the network device down when reconfiguring only the IP address from within ICMPv6 logic. Recommended by Xiang Xiao in order to avoid the long delays of bringing some networks back up.
Normally it is required that the network be in the "down" state when re-configuring the network interface.  This is thought not to be a necessary here because.

  1. The ICMPv6 logic here runs with the network locked so there can be no outgoing packets with bad source IP addresses from any asynchronous network activity using the device being reconfigured.
  2. Incoming packets depend only upon the MAC filtering.  Network drivers do not use the IP address; they filter incoming packets using only the MAC address which is not being changed here.
2018-11-10 07:13:54 -06:00
Xiang Xiao
a139b7f9b1 net/arp and icmpv6: Double the delay time on each iteration for ARP/ICMP to fight work jitter better. 2018-11-09 15:55:38 -06:00
Xiang Xiao
4f25b83f8f et/icmpv6: Remove the coupling between ICMPv6 and Ethernet by moving all Ethernet stuff to neighbor_ethernet_out.c and make the mac address as first field. 2018-11-09 15:41:23 -06:00
Xiang Xiao
a3cda3867b net/icmpv6/icmpv6_linkipaddr.c: Encapsulate the link scope address generation into icmpv6_linkipaddr() 2018-11-09 15:28:58 -06:00
Xiang Xiao
26ae4176f0 net/arp and net/icmpv6: don't call d_txavail directly since it may point to NULL 2018-11-09 11:22:58 -06:00
Gregory Nutt
a85f0e4cd5 networking: Update some comments to correct the naming used for the link layer. 2018-10-20 06:35:39 -06:00
Gregory Nutt
1acfac3eb6 net/: More fixes to wrong comments from old change from the interrupt driven network to the work-queue driven network. 2018-06-23 15:03:01 -06:00
Gregory Nutt
aabdc00e8c net/: Fix some incorrect comments that go back for years (but have also been cloned in newer files). The network was once interrupt driver, but now runs on the work queue with a semaphore to enforce mutual exclusion. 2018-06-23 14:09:06 -06:00
Gregory Nutt
a0e169ad7b net/: Fix a sixlowpan typo bug recently introduced; Rename g_ipv6_allzeroaddre with the more meaning g_ipv6_unspecaddr since the all-zero address is the IPv6 unspecified address (sometime IN6_ADDR_ANY). Remove more inline tests for IPv6 multicast with tcommint net_is_addr_mcast() macro. Update some comments. 2018-06-23 12:53:27 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following:
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following:
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Gregory Nutt
04ad162540 Networking: Clean up some naming that has bothered me for a long time... There are no interrupts and no interrupt handlers in the network. There are events and event handler (there used to to be interrupt logic in there years ago but that is long, long gone). 2017-08-29 14:08:04 -06:00
Gregory Nutt
aeb59383cf Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 15:26:09 -06:00
Gregory Nutt
bd7c84b23e Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 14:24:12 -06:00
Gregory Nutt
2ada7d5892 IPv6: Remove comparisons to the address with all ones set. IPv6 does not support broadcast addresses and certainly not in that form. Replace with multicast addresses beginning with 0xff02. 2017-08-07 11:50:50 -06:00
Gregory Nutt
f87d5a3f81 net/: Remove dangling space at the end of lines. 2017-06-28 13:32:19 -06:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
2d057c28c8 net: Disable priority inheritance on all semaphores used for signaling 2016-11-03 12:17:02 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
6209c51206 net/: More clean-up of spacing/alignment issues 2015-10-08 15:10:04 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00