Gregory Nutt
d95da886f3
Cosmetic changes to comments
2015-11-10 11:31:00 -06:00
Gregory Nutt
f080b43b80
SAMV7 QSPI: Improved debug output
2015-11-09 13:32:58 -06:00
Gregory Nutt
612ebdeabd
Kconfig: Set default number of MPU regions to 16 for Cortex-M7
2015-11-08 06:59:35 -06:00
Gregory Nutt
352d2a1d02
SAMV7 XDMAC: Don't sample interrupt status registers in debug mode. This can cause loss of interrupts
2015-11-07 11:25:20 -06:00
Gregory Nutt
dd69967934
SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized
2015-11-07 09:35:23 -06:00
Gregory Nutt
2e99311fb4
SAMV7 QSPI: DMA transfer width should be 32- not 16-bits
2015-11-07 09:34:40 -06:00
Gregory Nutt
7b3c0ac7bc
ARMv7-M: Cosmetic fixes to some file headers
2015-11-06 13:37:37 -06:00
Gregory Nutt
b4b0dde792
SAMV7 QSPI: Back out some kludges that are no longer necessary
2015-11-06 13:02:45 -06:00
Gregory Nutt
17c8cbceaf
SAMV7 QSPI: Rounding up buffer length for memcpy style transfer is un-necessary
2015-11-06 12:59:40 -06:00
Gregory Nutt
553ba1a682
SAMV7 QSPI: When QSPI is enabled, make the QSPI memory strongly ordered
2015-11-06 12:10:15 -06:00
Gregory Nutt
771095e25f
ARMv7-M: Add MPU support for strongly couple memory regions
2015-11-06 11:50:57 -06:00
Gregory Nutt
1c79e77811
ARMv7-M: Minor naming change to improve readability
2015-11-06 11:24:52 -06:00
Gregory Nutt
4371b756df
SAMV7: Add MPU and protected build support
2015-11-06 11:12:28 -06:00
Gregory Nutt
dff502d99b
SAMV7 QSPI: Costmetic changes
2015-11-05 15:03:53 -06:00
Gregory Nutt
e866cdd6f1
Fix missed closing comment in last commit
2015-11-05 10:43:49 -06:00
Gregory Nutt
68ae17a8a7
SAMV7 QSPI: Various kludges added during debug of QSPI. I am not if any of these are really correct
2015-11-05 10:32:13 -06:00
Gregory Nutt
f49e862db5
Merged in paulpatience/nuttx-arch/stm32_adc (pull request #29 )
...
STM32 ADC: Add support for STM32F30xxx
2015-11-05 09:28:34 -06:00
Paul A. Patience
7d793bb99b
STM32 ADC: Add support for STM32F30xxx
2015-11-05 10:13:58 -05:00
Frank Benkert
9cbbfe7e59
SAMV7 MCAN: Fix receipt of RTR requests. From Frank Benkert
2015-11-04 08:03:27 -06:00
Gregory Nutt
1299160d1d
SAMV71-XULT: Add call to can_txready() to MCAN driver. This is part of a fix to a CAN hang problem
2015-11-03 10:47:37 -06:00
Gregory Nutt
c90876ff9c
SAMV7: Add configuration support (only) for use of USART as SPI
2015-11-02 13:58:19 -06:00
Gregory Nutt
f6d7da24a7
SAM4CM should advertise that it supports Tickless operation in Kconfig
2015-11-02 06:39:24 -06:00
Gregory Nutt
96cee3709a
Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #28 )
2015-11-01 16:51:32 -06:00
Paul A. Patience
4c2c989838
STM32 PWM: Add support for multiple output channels
2015-11-01 17:11:35 -05:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
Gregory Nutt
4131081e72
Merged in pnb990/nuttx-kernel-arch/upstream_master (pull request #27 )
...
pwm duty can by zero
2015-11-01 07:52:57 -06:00
pnb
d1b4d55343
pwm duty can by zero
2015-11-01 14:45:12 +01:00
Gregory Nutt
d6d834be5b
Merged in pnb990/nuttx-kernel-arch/upstream_master (pull request #25 )
...
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 09:07:28 -06:00
Gregory Nutt
4bef3db150
Merged in v01d/arch/lpc4337 (pull request #24 )
...
lpc4337 support: WIP
2015-10-31 09:06:18 -06:00
pnb
0090cfe6d4
Change name of HAVE_TIMx_PWM_OUTPUT into HAVE_TIMx_GPIOCONFIG
2015-10-31 16:00:24 +01:00
pnb
668c56b1a6
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 15:42:00 +01:00
v01d
79fad2843a
lpc4337: WIP
2015-10-30 20:15:18 -03:00
Gregory Nutt
22ea50464f
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_qencoder (pull request #23 )
...
Enhance STM32 QEncoder driver with configurable input filters
2015-10-22 18:28:22 +08:00
Gregory Nutt
e3d44ace60
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429_pinmap (pull request #22 )
...
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
2015-10-22 18:26:53 +08:00
Gregory Nutt
04705d14df
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f373_exti (pull request #21 )
...
Add EXTI definitions for STM32F373
2015-10-22 18:21:45 +08:00
Gregory Nutt
2b078150e8
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429n (pull request #20 )
...
Add support for STM32F429N (TFBGA) chip
2015-10-22 18:19:52 +08:00
Gregory Nutt
c87c50df14
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_PLLSAI (pull request #19 )
...
Fix setup of PLLSAI in STM32F4xx.
2015-10-22 18:17:21 +08:00
Marten Svanfeldt
3299a31b27
Enhance STM32 QEncoder driver with configurable input filters
...
Current driver applies a fixed filter of f_sample=f_dts/4, N=6. This can
potentially be insufficient in noisy environments, or too slow for really
fast encoder sources, so let the user set it from the Kconfig file
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 11:06:01 +08:00
Marten Svanfeldt
fdb484f24e
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:56:36 +08:00
Marten Svanfeldt
d1c7e5b5fb
Fix setup of PLLSAI in STM32F4xx.
...
To correctly setup the PLLSAI register it is required to first mask out
the old PLL divisor and multiplier factors before setting new ones
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:33:39 +08:00
Marten Svanfeldt
4d879a33ee
Add support for STM32F429N (TFBGA) chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:30:57 +08:00
Marten Svanfeldt
54b333dcd3
Add EXTI definitions for STM32F373
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:22:41 +08:00
Frank Benkert
4ac10f53d7
Reconfigure System I/O when using USART1
2015-10-20 05:58:34 +08:00
Frank Benkert
78669f20f2
SAMV7 MCAN: ix switched assertion check for TSEG1 and TSEG2 in CANIOC_SET_BITTIMING
2015-10-18 08:14:10 +08:00
Gregory Nutt
c340185cb3
arch/sim: Fix spacing/alignment issues
2015-10-14 07:14:28 -06:00
Gregory Nutt
4a46a872bd
arch/mips: fix some spacing and alignment issues
2015-10-12 08:18:03 -06:00
Gregory Nutt
53ac085c77
Merged in paulpatience/nuttx-arch (pull request #18 )
...
STM32 PWM: Add ifdef for STM32F30XX
2015-10-09 15:57:28 -06:00
Paul A. Patience
08175bef58
STM32 PWM: Add ifdef for STM32F30XX
2015-10-09 17:20:42 -04:00
