sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,242 Commits 1 Branch 0 Tags 291 MiB
e4922ed9f0
Commit Graph

10794 Commits

Author SHA1 Message Date
Gregory Nutt
e4922ed9f0 Remove instructures to CD to tools/ before running ./configure.sh 
Squashed commit of the following:

    configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
    configs/*/README.txt:  Remove 'cd ..' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd -' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd tools' before each './configure.sh'
    configs/README.txt:  Remove instruction to CD tools/ before running configure.sh.
 2018-05-09 11:41:46 -06:00
Gregory Nutt
0b6ccfe769 configs/teensy-3.x/usbnsh: Remove CONFIG_USBDEV_DUALSPEED from configuration. Hardware supports only FS. 2018-05-09 08:50:05 -06:00
Gregory Nutt
a9f96ebdad configs/freedom-k28f: If drivers/leds/rgbled.c is enabled, then treat the board as though it had no discrete LEDs. 2018-05-05 13:01:23 -06:00
Gregory Nutt
b5a4d6d9ef configs/freedom-k28f: With these changes to the configuration, the NSH configuration is now functional on the k28f board. Also fixes corrects the active logic level for the RGB LED. arch/arm/src/kinetis/chip: Fixes an error in vector configuration. 2018-05-05 09:33:48 -06:00
Gregory Nutt
8c81b97148 Squashed commit of the following: 
configs/freedom-k28f:  Add button and LED support.
    arch/arm/src/kinetis:  Fix a couple of additional compile problems.
    arch/arm/src/kinetis/chip and configs/freedom-k28f:  Add things needed for a successful build.  Still need board LED definitions.
 2018-05-04 12:04:08 -06:00
Gregory Nutt
3755b0b6ef arch/arm/src/kinetis: Add pin multiplexing definitions for the K28F. 2018-05-04 10:19:00 -06:00
Gregory Nutt
0f2b8b0ca2 arch/arm/src/kinetis: Add SIM register definitions for the K28F. 2018-05-03 12:31:54 -06:00
Gregory Nutt
3c7fa88fd4 arch/arm/src/kinetis: Adds MCG register definitions for the K28F. 2018-05-03 08:21:50 -06:00
Gregory Nutt
96b6bf92a3 Cosmetic changes from review of last 2 PRs. 2018-05-02 16:46:12 -06:00
Anthony Merlino
cabb529c48 Merged in antmerlino/nuttx/photon-rgb (pull request #637) 
configs/photon: Adds RGB led support

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-05-02 22:39:18 +00:00
Gregory Nutt
d2def725d9 This commits adds initial support for the Kinetis Freedom-K28F board. Not you ready for prime time. 
Squashed commit of the following:

    arch/arm/src/kinetis:  A fixes from first (unsuccessful) attempt to build the Freedom-K28F configuration.
    configs/freedom-k28f:  Add basic board support for Freedom-K28F.  Initial commit is basically just the Teensy-3.x brought up to date and with name changes.
 2018-05-02 13:14:32 -06:00
Jake Choy
4261249fb6 arch/arm/src/imxrt: Add GPIO5 IRQ support. 2018-05-02 09:19:42 -06:00
Jake Choy
63f988b404 configs/imxrt1050-evk: This commit adds support for the imxrt button. I haven't been able to get GPIO 5 to work so I have replaced the button with GPIO1 pin24. It is right next to the button so I just wire it to the existing user button for testing. 2018-05-01 14:41:19 -06:00
Gregory Nutt
7927d1ff09 arch/arm/src/include/kinetis and src/kinetis: Beginning of a port to the K28F." 
Squashed commit of the following:

    arch/arm/src/kinetis:  Add K28F memory map.
    arch/arm/src/include/kinetis and src/kinetis:  Add basic chip features and interrupt-related definitions for the K28F
 2018-05-01 11:24:18 -06:00
Gregory Nutt
d6d42aeead configs/nrf52-pca10040: Fix an error in the name of an included file. This was introduced with the previous change to this file. 2018-05-01 07:21:08 -06:00
Gregory Nutt
1b1da6c7b7 arch/arm/src/nrf52: Fix several inconsistencies in naming. Mostly cosmetic but one was causing a compiler warning. 2018-04-30 16:30:13 -06:00
Gregory Nutt
fd844f8eac include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies. 2018-04-29 12:43:09 -06:00
Gregory Nutt
9a1277bd8f Makefile.unix: There is a sort command in the 'make savedefconfig' file. I found that sort behaves differently on different platforms based on the environment variable LC_ALL. Now, Makefile.unix will force LC_ALL=C just for the sort command so that we can all generate equivalent defconfig files. 2018-04-29 09:47:09 -06:00
Alan Carvalho de Assis
d00441869f configs/nucleo-l476rg: Add nxdemo configuration to nucleo-l476rg using PCD8544 2018-04-28 16:29:44 -06:00
Alan Carvalho de Assis
3b26e4a5a5 configs/nucleo-l476rg: Add support to Nokia LCD PCD8544 on nucleo-l476rg 2018-04-28 16:20:26 -06:00
Gregory Nutt
47bf3376d1 Costmetic changes to README and to comments. 2018-04-26 22:00:11 -06:00
seyyah
77d7856642 configs/stm32f429i-disco: Add a LittlevGL configuration for stm32f429i-disco 2018-04-26 15:23:57 -06:00
Matt Thompson
d212e15a43 This commit adds basic architectural support for the OpenRISK mor1kx architecture. The initial commit was verified on a Qemu simulation but is otherwise untested. 
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    Update README.
    configs/or1k:  Should include header file file where exported functin is prototyped.
    arch/or1k/src:  Eliminate some warnings.
    arch/or1k:  Complete review
    Fix some recently introduced build issues
    configs/or1k/nsh:  Convert to proper, compressed defconfig file.
    Another README update.
    Update README
    configs/or1k:  Updates from initial review.
    Update README.

Author: Matt Thompson <matt@extent3d.com>

    or1k: Added configurable CPU frequency to Kconfig. Calculate tick timer match period based on configured frequency.
    OpenRISC: Enable instruction and data cache
    OpenRISC: Initial support.
 2018-04-26 11:22:28 -06:00
Gregory Nutt
75f6d0a32a configs/photon: Refresh all configurations. configurations the use the SDIO card interface must support CONFIG_STM32_SDIO_CARD. 2018-04-26 10:41:06 -06:00
Gregory Nutt
44caaf0f2c arch/arm/src/imxrt: Add LIBCXX test configuration for IMXRT. 2018-04-26 08:22:37 -06:00
hhuysqt
144e335b85 drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver. 
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    include/nuttx/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    drivers/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    configs/photon:  Cosmetic, coding standard changes from review of last merge.
    arch/arm/src/stm32:  SDIO changes from last review:  Fix a few long lines and other coding standard issues; Make additions for SDIO card support dependent on a configuration option.

Author: hhuysqt <hyq9606@126.com>
    Return IEEE 802.11 MAC address just as ethernet does
    Modifyed bcmf_board_setup_oob_irq declaration
    Modified OOB ISR function types
    Add some logic according to WICED SDK
    Bug fixed: data_offset counts in 4-bytes
    Add BCM43438 logic for future developement
    Add tips on using telnet
    Use SDIO in-band interrupt instead of OOB interrupt, because Photon seems to unconnect the OOB interrupt line...
    add SDIO in-band interrupt logic
 2018-04-26 08:10:23 -06:00
Gregory Nutt
17cc0b9bfe arch/arm/src/imxrt: Minor reparitioning to account for the fact that the GPIO5 base address is not contiguous with the GPIO1-4 base addresses. 2018-04-25 14:54:14 -06:00
Gregory Nutt
10d99cc6e6 include/nuttx/wireless: Add a setbaud() method to the HCI UART lower half interface that can be used to change the default BAUD selection. arch/arm/src/stm32: Implement the setbaud() method for the STM32 HCI UART. 2018-04-25 13:09:08 -06:00
Gregory Nutt
cfc5f86862 net/udp: Minor update from review of 091e3f732e. In connect(), AF_UNSPEC is used to disconnect UDP socket. However, initial commit lacked logic to mark the socket as disconnected. 2018-04-25 10:13:59 -06:00
Gregory Nutt
091e3f732e net/udp: Fix several issues using connected UDP sockets: sendto() should not accept and address. Normally send() should be used instead. recvfrom() is no longer necessary. recvfrom() and poll() should not reset to accept any addresses but should, instead, only accept inputs and events from the connected remore peer. On of these issues was noted by 李桂丁 <liguiding@pinecone.net>. Changes were made as summarized here: http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch08lev1sec11.html 2018-04-25 08:43:38 -06:00
Goran Mekić
f6e087a05c Merged in mekanix/nuttx/feature/clang (pull request #632) 
Add clang support to stm32f746g-disco board

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-24 22:46:03 +00:00
Gregory Nutt
5fae6f8da6 Update README 2018-04-24 11:05:34 -06:00
Ivan Ucherdzhiev
d24ce35e1c configs/imxrt1050-evk: Add procfs auto-mount support in imxrt_bringup.c. 2018-04-24 07:04:21 -06:00
Gregory Nutt
3012abdc45 configs/stm32f4discovery/hciuart: Disable MMC/SD support. That made it difficult to re-use the configuration without the base board. MMC/SD support is not needed in that configuration anyway. 2018-04-24 06:53:37 -06:00
Gregory Nutt
505f460b6b configs: Review all implementations of board_lcd_initialize(). The NuttX convention is that all internal functions that return errors as an 'int' must return a negated errno value on failure and a non-negative value on success. Most were right but eight of them had cloned logic that returns 1 on success and zero on failure... both of which are interpreted as success by the caller since they are non-negative. 2018-04-21 18:03:01 -06:00
Alan Carvalho de Assis
1a879a3b52 configs/stm32f4discovery: Add MAX7219 support to STM32F4Discovery board 2018-04-21 17:41:01 -06:00
Jake Choy
459b9ec262 configs/imxrt1050-evk: Add logic to support user LED 2018-04-20 15:59:39 -06:00
Alan Carvalho de Assis
677be2f437 configs/nrf52-pca10040: Add a configuration for testing the watchdog timer. 2018-04-20 07:47:19 -06:00
Alan Carvalho de Assis
161fb98b11 configs/nrf52-pca10040: Add support for starting the watchdog timer on the nRF52. 2018-04-20 07:23:57 -06:00
Gregory Nutt
9b83737821 drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable. 2018-04-19 17:48:04 -06:00
Gregory Nutt
1d044e6952 Eliminate some warnings found in build-testing 2018-04-19 16:54:17 -06:00
Gregory Nutt
82aa7a486c configs/Kconfig: Fix some breakage inflicted on the Kconfig file by the i.MX RT merge. Fix some coding standard problems in hymini-stm32v board support. 2018-04-19 16:36:35 -06:00
Gregory Nutt
44a5a7e170 wireless/bluetooth: Remove Rx kernel thread. The operation of dispatching messages can be performed just as well on the high and low priority work queue. The network driver operates the low priority work queue so that also integrates better with network frame reception. 2018-04-19 08:52:09 -06:00
Ivan Ucherdzhiev
1672f8d0ce configs/tms570ls31x-usb-kit: Adds support for the TI Hercules TMS570LS31x USB Kit 2018-04-18 09:21:38 -06:00
Gregory Nutt
1224db454b arch/arm/src/stm32 and drivers/wireless/bluetooth: Fix some buffer management errors in HCI UART upper and lower halves. 2018-04-18 08:17:15 -06:00
Gregory Nutt
27f624d881 drivers/wireless/bluetooth: Default BAUD must be 115200, Fix logic in Rx callback, Rx callback must execute on work queue. Now sends and receives one command and response. But hangs on the next. 2018-04-17 13:07:28 -06:00
Gregory Nutt
862ff9cae3 arch/arm/src/stm32/: In HCI UART, sense of RTS and CTS are inverted. When we speak of asserting RTS we mean setting nRTS to zero. 2018-04-16 17:14:51 -06:00
Gregory Nutt
603efe6fb5 arch/arm/src/stm32 and configs/stm32f4discovery: Some feeble attempts to communicate with the BT860. Not much progress yet. 2018-04-16 15:24:28 -06:00
Gregory Nutt
d59c97208c arch/arm/src/imxrt: Fix problem with with CPU hanging during boot in the clockconfig function. configs/imxrt1050-evk/scripts: Update linker script so that the NXP boot header will be included in the build. 2018-04-16 09:30:04 -06:00
Gregory Nutt
e470846356 Remove all references to the Yahoo group. 2018-04-15 17:15:48 -06:00