arch/arm/src/max326xx/max32660/max32660_serial.c: Add a mostly commented out serial driver. With this, we can accomplish a complete build with many warnings for 'Missing logic'
configs/max32660-evsys/src/max326_button.c: Add support for the on-board button.
arch/arm/src/max326xx: Add a mostly empty max326_lowputc.c file mostly so that we can get further in the compilation. Fixed several more compile errors revealed by this.
arch/arm/src/max326xx: Add peripheral clock control header file.
Author: Gregory Nutt <gnutt@nuttx.org>
A few trivial updates from review of changes.
Remove references to NRF52-PCA10040 from documentation. Replace with NRF52-generic.
Remove configs/nrf52-pca10040/ Replaced with configs/nrf52-generic.
Author: Zou Hanya <hanyazou@gmail.com>
Improve LED handling #if~#endif in nrf52_autoleds.c and nrf52_userleds.c
Add Adafruit Feather nRF52 board LED support
Add Adafruit Feather nRF52 board
Add nrf52-generic
Replace 'pca10040' with 'generic'
Copy from nrf52-pca10040 to nrf52-generic
Squashed commit of the following:
arch/arm/src/max326xx and configs/max32660-evsys/nsh/defconfig: Work out some issues related to MAX326xx configuration.
configs/max32660-evsys: Add unverified board support framework.
stm32/stm32_adc: major refator
stm32/stm32_adc: use STM32 ADC IP core version and ADC available functions instead of chip family names in conditional compilation
stm32/chip: replace family specific ADC headers with STM32 ADC IP core version headers
stm32/stm32_adc: configurable sample time supported for all chips, not only L1
stm32/stm32_adc: enable/disable interrupts supported for all chips, not only L1
stm32/stm32_adc: resolution configuration
stm32/stm32f33xxx_adc: remove wrong assertion
configs/nucleo-f303ze: support for ADC and ADC example
configs/stm32f429i-disco: support for ADC and ADC example
Approved-by: GregoryN <gnutt@nuttx.org>
NuttX: STM32F407VG has only one DAC
NDAC=2 causes compilation error when trying to use e.g. STM32_DAC1_CR macro.
Approved-by: GregoryN <gnutt@nuttx.org>
imxrt:Clock config fixes and board.h sets sources and divisors
* imxrt:clockconfig bug fix & Board config set clocks
Fixed logic that was not clearing bits as ~ was
mising in &= mask operations.
Use valuse from the board.h file so set the Mux that
selects the clock sources.
Use board defined PODF values to select clock.
Only configure USDHC2 clocks when board defines clocks.
* imxrt1050-evk:Board setting used to set LSPI and USDHC Clocks
Approved-by: GregoryN <gnutt@nuttx.org>
When MIPS port is built for microMIPS and then loaded as an application, the __start entry point is entered in microMIPS mode, but the CPU core initialization code there misses to set the config3ISAOnExc bit to 1. Subsequently, exceptions are entered in MIPS32 mode, but the code base was built for microMIPS.
This change is needed specifically for the case where a bootloader sets the SPE bit before starting NuttX. In that case, the test in the SPI driver is bogus. This change fixes that by assuring that NuttX has booted and initialized at least once (whether or not SPE is set) before the driver starts refusing to initialize.
arch/arm/stm32*: Don't rely on SPI_CR1_SPE to determine if peripheral has been initialized yet.
Approved-by: GregoryN <gnutt@nuttx.org>
