sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
25,809 Commits 1 Branch 0 Tags 291 MiB
e891a33c2e
Commit Graph

9122 Commits

Author SHA1 Message Date
Gregory Nutt
1bb9c1fa39 Update README 2016-05-23 07:55:25 -06:00
Gregory Nutt
34ce000c50 Sabre-6quad: Add an SMP configuration; Enable procfs in both configurations 2016-05-22 16:17:10 -06:00
Gregory Nutt
c7979ad49c Update README and ChangeLog 2016-05-22 15:17:03 -06:00
Gregory Nutt
5e5b6d677d Update README and ChangeLog 2016-05-22 15:05:41 -06:00
Gregory Nutt
9bd8070b34 Review of last PR 2016-05-20 18:12:05 -06:00
Gregory Nutt
56616f99d3 Forgot to add file before last commit 2016-05-20 18:09:12 -06:00
Gregory Nutt
e47714322e Merged in K-man23/nuttx/stm32f411e-disco (pull request #25) 
Add basic configuration for stm32f411e-disco board with STM32F411VE chip
 2016-05-20 17:54:07 -06:00
Konstantin Berezenko
a2253cdd3e Add basic configuration for stm32f411e-disco board with STM32F411VE chip 2016-05-20 16:38:25 -07:00
Steve
bd3ef36eda SUMMARY 
-------
   This patch enhances networking support for the simulation under Linux.
   Includes updated support for Linux TUN/TAP, and the addition of support for
   Linux bridge devices.

CHANGES
-------
   o Check to see if the d_txavail callback is present before calling it in
     the arp send code.  This prevents a segfault when simulating the telnetd
     daemon with arp send enabled.

   o Adjust the simulation's netdriver_loop() so it will detect and respond to
     ARP requests.

   o Do not attempt to take the tap device's hardware address for use by the
     simulation.  That hardware address belongs to the host end of the link,
     not the simulation end.  Generate a randomized MAC address instead.

   o Do not assign an IP address to the interface on the host side of the TAP
     link.

   + Provide two modes: "host route" and "bridge".

   + In host route mode, maintain a host route that points any traffic for the
     simulation's IP address to the tap device.  In this mode, so long as the
     simulation's IP is a free address in the same subnet as the host, no
     additional configuration will be required to talk to it from the host.
     Note that address changes are handled automatically if they follow the
     rule of if-down/set-address/if-up, which everything seems to.

   + In bridge mode, add the tap device to the specified bridge instance.  See
     configs/sim/NETWORK-LINUX.txt for information and usage examples.  This
     enables much more flexible configurations (with fewer headaches), such as
     running multiple simulations on a single host, all of which can access
     the network the host is connected to.

   o Refresh configurations in configs/sim where CONFIG_NET=y.  They default
     to "host route" mode.

   o Add configs/sim/NETWORK-LINUX.txt

CAVEATS
-------
   - The MAC address generation code is extremely simplistic, and does not
     check for potential conflicts on the network.  Probably not an issue, but
     something to be aware of.

   - I was careful to leave it in a state where Cygwin/pcap should still work,
     but I don't have a Windows environment to test in.  This should be
     checked.

   - I don't know if this was ever intended to work with OS X.  I didn't even
     try to test it there.

NOTES
-----
   - Was able to get telnetd working and simulate nsh over telnet, but only so
     long as listen backlogs were disabled.

     There appears to be a bug in the backlog code where sockets are being
     returned in SYN_RCVD state instead of waiting until they're ESTABLISHED;
     if you perform an immediate send after accepting the connection, it will
     confuse the stack and the send will hang; additionally, the connection
     will never reach ESTABLISHED state.

     Can be worked around by adding a sleep(1) after the accept in telnetd.  I
     don't have the necessary knowledge of the IP stack to know what the
     correct fix is.
 2016-05-20 17:36:14 -06:00
Alan Carvalho de Assisis
6c852faebb stm32f103-minimum: Add instructions for using the secret 128KB FLASH 2016-05-20 17:14:19 -06:00
Gregory Nutt
5c55846d2d Minor README file update 2016-05-20 17:11:49 -06:00
Gregory Nutt
356692d70e SMP: Need to enable FPU on other CPUs as well 2016-05-20 13:35:58 -06:00
Gregory Nutt
07acd5327a SMP: Clean CPU0 D-Cache before starting new CPU; Invalidate D-Cache when new CPU started. 2016-05-20 12:39:02 -06:00
Gregory Nutt
eeb4a5c230 Remove comments blocks before empty file sections 2016-05-20 07:46:10 -06:00
Gregory Nutt
2d3e653996 Mostly costmetic changes from review of last PR 2016-05-20 07:44:56 -06:00
Mark Olsson
a985e289ec Fixed User Button config for Nucleo-144 board family 2016-05-20 15:22:47 +02:00
Mark Olsson
1f869e5879 Added new configuration (evalos) for the Nucleo-144 board family. 
This new configuration will showcase all the features of the boards, so is a good way to easily test out a new board. This can be added to all boards in the future.
 2016-05-20 14:55:30 +02:00
Mark Olsson
02e43ab1b3 Adds support for the 3 user LEDs on the Nucleo-144 board family 
Extra: procfs support doesn't work, so the code for this has been removed from AppInitialize
 2016-05-20 13:45:16 +02:00
Gregory Nutt
7f7d4e664c Completely trivial changes from review of last PR 2016-05-19 14:09:00 -06:00
Gregory Nutt
34c0c7b54c Another update to README 2016-05-19 10:20:40 -06:00
Gregory Nutt
8af8d9fb05 Update README 2016-05-19 10:03:51 -06:00
Gregory Nutt
4c837d6e86 Update README 2016-05-19 07:59:31 -06:00
Gregory Nutt
66233060e2 Update README file 2016-05-19 07:25:52 -06:00
Gregory Nutt
8ace1e3be2 Remove all implementatinos of up_wdginitialize(). It is no longer used. 2016-05-18 19:48:42 -06:00
Gregory Nutt
1d2ee34131 SAM WDT: Rename up_wdginitialize() functions to something more appropriate for the internal OS interface. 2016-05-18 19:47:41 -06:00
Gregory Nutt
161bf368c1 Remove schematic... wrong board 2016-05-18 15:56:34 -06:00
Gregory Nutt
5d574549bd stm32f103-minimum: Add schematic; remove unused watchdog driver logic 2016-05-18 15:37:42 -06:00
Gregory Nutt
67756f1f70 Refresh configurations 2016-05-18 13:49:38 -06:00
Alan Carvalho de Assis
104b695645 configs: Add support for the generic STM32F103CBT6 Minimum Board 2016-05-18 13:33:17 -06:00
Gregory Nutt
f7fd8c6539 Trivial typo fix 2016-05-18 11:56:19 -06:00
Gregory Nutt
f454b38d6e ARMv7-A SMP: Allow CONFIG_SMP_NCPUS=1 for testing purposes 2016-05-18 09:17:02 -06:00
Gregory Nutt
3d87005e5a Fix some compilation issues when certain combinations of debug options are selected. 2016-05-17 12:06:32 -06:00
Gregory Nutt
8bd57a7fbc Sabre-6Quad: Fix sense of LED discrete output. It appears that a high value illuminates the LED. 2016-05-17 10:08:44 -06:00
Gregory Nutt
b416f6cc1b i.MX6: Calibrate delay loop 2016-05-17 08:22:38 -06:00
Gregory Nutt
5d44fd6a00 i.MX6: LEDs were not working because board_autoled_initialize() was not being called 2016-05-17 08:10:49 -06:00
Gregory Nutt
4c08492c0f i.MX6: Fix a bit setting in the timer configuration 2016-05-17 07:21:18 -06:00
Aleksandr Vyhovanec
80a9357b6f wfi.mac should be copied into the directory with the IAR project. Then set it to "Options -> Debugger -> Setup macro file(s)". This will allow debugging via JTAG when calling the WFI instruction. 2016-05-17 06:45:00 -06:00
Gregory Nutt
e6728bac29 Cortex-A9 GIC: Add an interface to set interrupt edge/level trigger 2016-05-16 14:42:55 -06:00
Gregory Nutt
4feeb0c2b4 Cortex-A9 GIC: Some fixes that I don't fully understand but do indeed give me serial interrupts 2016-05-16 12:50:35 -06:00
Gregory Nutt
a0cdbcb58f Update README 2016-05-16 08:44:18 -06:00
Gregory Nutt
a1e066d6a5 Merge remote-tracking branch 'origin/master' into nucleo-144 2016-05-13 11:51:22 -06:00
Gregory Nutt
7c52b8ddae Add a .noinit section to all ARMv7-A linker scripts 2016-05-13 08:05:21 -06:00
Gregory Nutt
99e695398c Rename up_boot to arm_boot 2016-05-12 13:42:49 -06:00
Gregory Nutt
365df152c5 Remove TABs and while space from end of line in README file 2016-05-12 12:26:56 -06:00
Gregory Nutt
61f6915898 Update README files 2016-05-12 10:01:43 -06:00
David Sidrane
d03b0f5188 README.txt file for the nucleo-144 2016-05-12 09:56:32 -06:00
Gregory Nutt
abc0481a57 Port for the Nucleo-144 board with the STM32F476ZG MCU. From Kconstantin Berezenko. 2016-05-12 09:47:54 -06:00
Gregory Nutt
1ac3d2128a Trivial fix to comment 2016-05-11 17:20:14 -06:00
Gregory Nutt
e523c93391 Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' message weirdness. 2016-05-10 15:44:06 -06:00
Gregory Nutt
5e9b1c615f Merged in paulpatience/nuttx/userleds (pull request #13) 
userleds: Don't select ARCH_LEDS with BOARD_CUSTOM_LEDS, otherwise we can't use the board_userled* functions
 2016-05-08 01:37:31 -06:00
Gregory Nutt
0143b3869a Merged in ziggurat29/nuttx/stm32l4_update_rtc_impl (pull request #14) 
Stm32l4_update_rtc_impl
 2016-05-08 01:24:09 -06:00
ziggurat29
523591736f trivial; enable the 'alarms' example app in the STL32L4-disco config, since it is now working 2016-05-07 12:24:15 -05:00
ziggurat29
1e5910a99d update nucleo l476 config and code to support the RTC and the alarms functionality 2016-05-07 12:03:18 -05:00
Paul A. Patience
dfff78d7ab userleds: Don't select ARCH_LEDS with BOARD_CUSTOM_LEDS, otherwise we can't use the board_userled* functions 2016-05-05 12:29:43 -04:00
Gregory Nutt
c31ec6bdad Merged in paulpatience/nuttx/uavcan (pull request #12) 
UAVCAN: Update version
 2016-05-05 03:23:26 -06:00
Paul A. Patience
e6e2552a12 UAVCAN: Update version 2016-05-03 17:18:57 -04:00
ziggurat29
dedcbeba2e add unique id function to arch, modded board to support unique id boardctl 2016-05-03 11:09:23 -05:00
Gregory Nutt
a95e426d35 Costmetic changes from last PR 2016-04-30 09:04:38 -06:00
ziggurat29
2fe0565437 added support for HSE and MSI clocks, and auto trim of MSI to LSE (needed for USB). 2016-04-29 22:13:32 -05:00
Gregory Nutt
61fbef5727 Costmetic changes from review or PR 2016-04-28 02:39:27 -06:00
ziggurat29
97ea667a7a refresh defconfig 2016-04-27 19:51:49 -05:00
ziggurat29
2bfb326994 add board ioctls for allowing user application to cause qspi memory mapped mode to be engaged and disengaged. Also partitioned qspi flash for filesystem and other purposes (eventually xip). 2016-04-27 19:36:43 -05:00
Gregory Nutt
2d3529294e Merged in ziggurat29/nuttx/stm32l4_qspi_005 (pull request #6) 
QSPI DMA support in STM32L4, and DMA fixes...
 2016-04-24 16:53:33 -06:00
ziggurat29
1baf943dca update stm32l4 disco board to reflect QSPI DMA support; refresh defconfig 2016-04-24 16:29:52 -05:00
Gregory Nutt
422769e859 Update README. Improve some debug output. 2016-04-23 14:27:32 -06:00
Gregory Nutt
d4ac277df8 Mostly costmetic updates to comments, README 2016-04-23 13:26:52 -06:00
Gregory Nutt
f3499b173a VNC: Fix a memory clobblering bug 2016-04-23 10:21:49 -06:00
Gregory Nutt
fab5a71fe5 Add a VNC NxWM configuration to support further VNC testing 2016-04-23 08:21:15 -06:00
Gregory Nutt
8c1534e3ed VNC: Finish initializing the VNC server once we have the NX handle 2016-04-22 13:39:35 -06:00
Gregory Nutt
3527a5a5d7 Update README.txt 2016-04-22 10:13:53 -06:00
Gregory Nutt
2a928cbdbe VNC: Verify RGB8 operation; samv71-xult: VNC configuration now uses RGB8 by defualt 2016-04-22 08:57:42 -06:00
Marco Krahl
3537f93cfb stm32f429i-disco: Set default spi clock frequency for display initializing 2016-04-22 07:28:21 -06:00
Gregory Nutt
ceac1dcaee Update README 2016-04-21 16:15:56 -06:00
Gregory Nutt
c25a9b4833 Update a configuration 2016-04-21 13:19:15 -06:00
Gregory Nutt
7134652fea VNC: Fixes from debug. One issues is that VNC client is changing color formats after starting. That is now handled. 2016-04-20 09:47:02 -06:00
Gregory Nutt
65f21d0edb VNC: More updates from testing. There are issues with high rate, large TCP transfers. 2016-04-19 15:39:58 -06:00
Gregory Nutt
f3515a242d VNC: Implemented 3.8 protocol. Seems to be required by my RealVNC client 2016-04-19 08:33:16 -06:00
Gregory Nutt
5997373b55 VNC: Fix some obvious logic and coding errors found in early testing 2016-04-18 15:34:39 -06:00
Gregory Nutt
628dd9b181 SAMV71-Xult: Add a configuration that will be used to test VNC 2016-04-18 12:25:23 -06:00
Gregory Nutt
ca6f822417 File missed in last commit 2016-04-18 06:52:00 -06:00
Gregory Nutt
26ba3a2b96 Cosmetic changes from review of last PR 2016-04-18 06:50:45 -06:00
Gregory Nutt
c5cce5603e Merged in ziggurat29/nuttx/stm32l4_qspi_002 (pull request #2) 
basic support for QSPI in STM32L4; verified via 'examples/media'
 2016-04-18 06:30:28 -06:00
ziggurat29
499fea73ec basic support for QSPI in STM32L4; verified via 'examples/media' 2016-04-17 21:08:25 -05:00
Gregory Nutt
aa64214877 FB: Add a display number to the framebuffer planeinfo structure 2016-04-17 10:08:27 -06:00
Alan Carvalho de Assis
de734ba310 configs/stm32f4discovery: Integrate BH1750FVI driver in the STM32F4Discovery board 2016-04-15 08:20:33 -06:00
Gregory Nutt
46846c0c24 Framebuffer driver: Add a display number to each interface in order to support multiple displays 2016-04-14 12:23:15 -06:00
Gregory Nutt
3b245d6092 SAMV7-XULT: Refresh configurations 2016-04-14 08:00:43 -06:00
Gregory Nutt
91686e671c configs/nucleus2g: Remove this board from the configs/ directory. A snapshot is still available in the Obsoleted repository 2016-04-12 12:19:30 -06:00
Gregory Nutt
b909099f09 Update some README files 2016-04-10 09:12:00 -06:00
Gregory Nutt
3228d32938 Correct permmisions on executable scripts 2016-04-10 09:11:59 -06:00
Gregory Nutt
51bed92fc2 STM32F429i-disco: Add uVision GCC IDE project files 2016-04-10 09:11:56 -06:00
Kha Vo
7689de230b STM32F29i-disco: Add uVision GCC IDE template files for the STM32F429i Discovery 2016-04-10 09:11:56 -06:00
Kha Vo
5912c840cb IAR/uVision template and ICF files 2016-04-10 09:11:55 -06:00
Gregory Nutt
4449b95fda Add references to new README files 2016-04-10 09:11:54 -06:00
Kha Vo
db70124478 STM3220G-EVAL: Update README and add project files for building with the IAR or uVision IDEs. 2016-04-10 09:11:53 -06:00
Gregory Nutt
1df1148bae STM3220G-EVAL: Update README.txt file describing how to build using the IAR toolchain 2016-04-10 09:11:52 -06:00
Gregory Nutt
7337e748de Merge in configs/ submodule 2016-04-10 07:57:59 -06:00
Gregory Nutt
a031fc1a88 Remove submodules 2016-04-09 12:36:05 -06:00
Gregory Nutt
8b848504c3 Fix all URLs to the NuttX repository 2016-04-06 18:04:06 -06:00
Gregory Nutt
6e24c287f6 Merge branch 'master' of bitbucket.org:nuttx/boards into HEAD 2016-04-06 17:59:30 -06:00