.. |
chip
|
Add GPIO_I2C2_SDA_4 to STM32F411
|
2016-06-15 09:06:08 -07:00 |
gnu
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
iar
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
chip.h
|
Add stm32f105r support
|
2016-06-06 12:52:41 -07:00 |
Kconfig
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
Make.defs
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
stm32_1wire.c
|
1-wire: Initialization/uninitialization functions are not use MCU-independent up_ naming. Should use STM32-specific stm32_ naming. These are not globally accessible but only accessible from STM32 board logic.
|
2016-05-25 17:56:47 -06:00 |
stm32_1wire.h
|
Costmetic changes from review of last PR
|
2016-05-25 18:04:39 -06:00 |
stm32_adc.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_adc.h
|
STM32 ADC: Add DMA support for STM32F30xxx
|
2015-12-22 03:42:37 -05:00 |
stm32_aes.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_aes.h
|
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
|
2015-02-04 06:49:05 -06:00 |
stm32_alarm.h
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
stm32_allocateheap.c
|
Rename CONFIG_DEBUG_HEAP to CONFIG_HEAP_COLORATION
|
2016-06-15 14:48:06 -06:00 |
stm32_bbsram.c
|
Add _ to the beginning of all debug macros to avoid name collisions
|
2016-06-16 12:33:32 -06:00 |
stm32_bbsram.h
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
stm32_bkp.h
|
|
|
stm32_can.c
|
Centralize definitions associated with CONFIG_DEBUG_CAN
|
2016-06-15 15:45:27 -06:00 |
stm32_can.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_capture.c
|
Correct conditional compilation in STM32 timer cpature logic
|
2016-06-03 08:41:53 -06:00 |
stm32_capture.h
|
A few more cosmetic changes
|
2015-12-24 07:38:17 -06:00 |
stm32_ccm.c
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
stm32_ccm.h
|
Clean up some naming
|
2015-12-01 15:04:12 -06:00 |
stm32_dac.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_dac.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_dbgmcu.h
|
|
|
stm32_dma2d.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_dma2d.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
stm32_dma.c
|
Fix STM32 DMA code and configuration for STM32F37X chips
|
2016-06-09 05:02:43 +02:00 |
stm32_dma.h
|
Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled
|
2016-06-12 14:44:04 -06:00 |
stm32_dumpgpio.c
|
Add _ to the beginning of all debug macros to avoid name collisions
|
2016-06-16 12:33:32 -06:00 |
stm32_eth.c
|
Fix yet more typos from the last commits
|
2016-06-16 15:06:13 -06:00 |
stm32_eth.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_exti_alarm.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
stm32_exti_gpio.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
stm32_exti_pwr.c
|
Fix some spacing problems
|
2015-10-04 14:59:08 -06:00 |
stm32_exti_pwr.h
|
STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.
|
2015-04-28 06:37:59 -06:00 |
stm32_exti.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_flash.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_flash.h
|
|
|
stm32_fsmc.h
|
Fix typo
|
2015-09-10 21:07:03 -04:00 |
stm32_getc.c
|
Update some comments
|
2016-06-04 13:04:13 -06:00 |
stm32_getc.h
|
KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc
|
2016-06-04 11:29:27 -06:00 |
stm32_gpio.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_gpio.h
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
stm32_i2c_alt.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_i2c.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_i2c.h
|
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
|
2016-02-02 12:08:23 -06:00 |
stm32_idle.c
|
Add _ to the beginning of all debug macros to avoid name collisions
|
2016-06-16 12:33:32 -06:00 |
stm32_irq.c
|
Add _ to the beginning of all debug macros to avoid name collisions
|
2016-06-16 12:33:32 -06:00 |
stm32_iwdg.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_lowputc.c
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
stm32_lowputc.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_lse.c
|
Fix an error introduced into stm32_pwr_enablebkp(). That function must preserve the previous state of backup domain access on return.
|
2015-04-18 07:31:20 -06:00 |
stm32_lsi.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
stm32_ltdc.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_ltdc.h
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
stm32_mpuinit.c
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
stm32_mpuinit.h
|
|
|
stm32_otgfs.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_otgfsdev.c
|
One more time. Correct name of USB debug macros are uinfo and uerr, not usbinfo and usberr.
|
2016-06-16 13:36:37 -06:00 |
stm32_otgfshost.c
|
One more time. Correct name of USB debug macros are uinfo and uerr, not usbinfo and usberr.
|
2016-06-16 13:36:37 -06:00 |
stm32_otghs.h
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:28:30 -06:00 |
stm32_otghsdev.c
|
Fix another search and replace error from last set of changes
|
2016-06-16 18:19:37 -06:00 |
stm32_otghshost.c
|
One more time. Correct name of USB debug macros are uinfo and uerr, not usbinfo and usberr.
|
2016-06-16 13:36:37 -06:00 |
stm32_pm.h
|
Cosmetic: Move # of pre-processior command to column 1
|
2015-09-05 09:07:37 -06:00 |
stm32_pminitialize.c
|
|
|
stm32_pmsleep.c
|
|
|
stm32_pmstandby.c
|
|
|
stm32_pmstop.c
|
|
|
stm32_procfs_ccm.c
|
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
|
2016-06-11 15:50:49 -06:00 |
stm32_pwm.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_pwm.h
|
STM32 PWM: Add support for multiple output channels
|
2015-11-01 17:11:35 -05:00 |
stm32_pwr.c
|
Correct description of some input parameters. Suggested by Pelle Windestam
|
2015-05-05 06:26:59 -06:00 |
stm32_pwr.h
|
Correct description of some input parameters. Suggested by Pelle Windestam
|
2015-05-05 06:26:59 -06:00 |
stm32_qencoder.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_qencoder.h
|
|
|
stm32_rcc.c
|
Eliminate a warning
|
2016-06-16 16:22:01 -06:00 |
stm32_rcc.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_rng.c
|
Add _ to the beginning of all debug macros to avoid name collisions
|
2016-06-16 12:33:32 -06:00 |
stm32_rtc_lowerhalf.c
|
alarm 10 now runs to completion
|
2016-05-31 14:17:52 -07:00 |
stm32_rtc.c
|
Eliminate a warning
|
2016-06-16 15:26:19 -06:00 |
stm32_rtc.h
|
STM32: Move backup domain reset to stm32_rcc.c in order to avoid disabling LSE during RTC initialiation.
|
2016-06-16 09:52:15 -06:00 |
stm32_rtcc.c
|
STM32: Move backup domain reset to stm32_rcc.c in order to avoid disabling LSE during RTC initialiation.
|
2016-06-16 09:52:15 -06:00 |
stm32_rtcounter.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_sdio.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32_sdio.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_serial.c
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
stm32_spi.c
|
Centralize definitions associated with CONFIG_DEBUG_SPI
|
2016-06-15 10:41:13 -06:00 |
stm32_spi.h
|
For STM32, rename up_spiinitialize to stm32_spibus_initialize
|
2016-01-26 12:22:27 -06:00 |
stm32_start.c
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
stm32_syscfg.h
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32_tim_lowerhalf.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32_tim.c
|
Use DEBUG assertions to save space
|
2016-06-03 14:49:05 -06:00 |
stm32_tim.h
|
Revert "add timer capture STM32"
|
2015-12-22 13:27:42 +01:00 |
stm32_timerisr.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_uart.h
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
stm32_uid.c
|
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
|
2015-11-18 14:33:27 -06:00 |
stm32_uid.h
|
Changes to last merge from review for compliance to coding standards
|
2015-11-17 21:10:17 -06:00 |
stm32_usbdev.c
|
One more time. Correct name of USB debug macros are uinfo and uerr, not usbinfo and usberr.
|
2016-06-16 13:36:37 -06:00 |
stm32_usbdev.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_usbhost.c
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:42:29 -06:00 |
stm32_usbhost.h
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
stm32_userspace.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32_userspace.h
|
|
|
stm32_waste.c
|
|
|
stm32_waste.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_wdg.h
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
stm32_wwdg.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32.h
|
Centralize definitions associated with CONFIG_DEBUG_CAN
|
2016-06-15 15:45:27 -06:00 |
stm32f10xxx_dma.c
|
Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled
|
2016-06-12 14:44:04 -06:00 |
stm32f10xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32f20xxx_dma.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32f20xxx_rcc.c
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
stm32f30xxx_i2c.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32f30xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32f37xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |
stm32f40xxx_alarm.h
|
RTC lower half was missing call to F4 alarm cancel function
|
2016-04-04 08:23:09 -06:00 |
stm32f40xxx_dma.c
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
stm32f40xxx_rcc.c
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
stm32f40xxx_rtcc.c
|
STM32: Move backup domain reset to stm32_rcc.c in order to avoid disabling LSE during RTC initialiation.
|
2016-06-16 09:52:15 -06:00 |
stm32l15xxx_rcc.c
|
STM32: Correct some spacing issues
|
2015-10-07 13:45:15 -06:00 |