sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
nuttx/arch/arm/src/imxrt
History
Dave Marples 69e215e083 As promised, here's the patch that implements USDHC1 & 2 selection on the imxrt. If only one port is active (either 1 or 2) it will always be numbered as 0, if both are active then USDHC1 will be number 0, USDHC2 will be 1.
2019-07-07 17:07:04 -06:00
..
hardware
arch/arm/src/imxrt/imxrt_ehci.c: Add i.MXRT ECHI driver.
2019-06-29 18:39:42 -06:00
chip.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt102x_daisy.c
Merged imxrt1020 into master
2019-04-30 16:08:46 -06:00
imxrt105x_daisy.c
arch/arm/src/imxrt: ADD GPIO Support Input daisy selection
2019-01-16 18:03:10 -06:00
imxrt106x_daisy.c
arch/arm/src/imxrt: ADD GPIO Support Input daisy selection
2019-01-16 18:03:10 -06:00
imxrt_allocateheap.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_clockconfig.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_clockconfig.h
arch/arm/src/imxrt: Various fixes from attempt at initial bringup.
2018-05-14 16:07:34 -06:00
imxrt_clrpend.c
…
imxrt_config.h
arch/arc/src: Remove all driver-specific logic to set the interrupt priority. There is no good reason to change the interrupt priority unless you just want to debug a difficult problem. OR is you want to use high priority interrupts. In that case the specific interrupt priorities will need to be set by board-specific logic.
2018-12-06 13:34:41 -06:00
imxrt_daisy.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_edma.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_edma.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_ehci.c
arch/arm/src/imxrt/imxrt_ehci.c: Add i.MXRT ECHI driver.
2019-06-29 18:39:42 -06:00
imxrt_ehci.h
arch/arm/src/imxrt/imxrt_ehci.c: Add i.MXRT ECHI driver.
2019-06-29 18:39:42 -06:00
imxrt_enet.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_enet.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_gpio.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_gpio.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_gpioirq.c
Merged imxrt1020 into master
2019-04-30 16:08:46 -06:00
imxrt_hprtc.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_hprtc.h
This commit addes support for the i.MXRT RTC. This initial commit is code complete (with limited featurs and options) but untested.
2018-06-27 11:19:12 -06:00
imxrt_idle.c
Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly).
2019-03-20 19:27:40 -06:00
imxrt_iomuxc.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_iomuxc.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_irq.c
In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts.
2018-12-03 17:41:59 -06:00
imxrt_irq.h
…
imxrt_lcd.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_lcd.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_lowputc.c
arch/arm/src/imxrt/imxrt_lowputc.c: Add changes omitted from 173897afb967418aeef9a6c607ec0e0c27b832a6
2019-05-30 17:22:18 -06:00
imxrt_lowputc.h
This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.
2019-05-30 13:45:36 -06:00
imxrt_lpi2c.c
arch/arm/src/imxrt/imxrt_lowputc.c: Add changes omitted from 173897afb967418aeef9a6c607ec0e0c27b832a6
2019-05-30 17:22:18 -06:00
imxrt_lpi2c.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_lpspi.c
arch/arm/src/imxrt/imxrt_lowputc.c: Add changes omitted from 173897afb967418aeef9a6c607ec0e0c27b832a6
2019-05-30 17:22:18 -06:00
imxrt_lpspi.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_lpsrtc.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_lpsrtc.h
This commit addes support for the i.MXRT RTC. This initial commit is code complete (with limited featurs and options) but untested.
2018-06-27 11:19:12 -06:00
imxrt_mpuinit.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_mpuinit.h
configs/imxrt1050-evk: Add knsh configuration.. PROTECTED mode NSH build.
2018-06-08 16:27:14 -06:00
imxrt_ocotp.c
arch/arm/src/imxrt/imxrt_ocotp.c: Fix a typo that I introduced trying to fix a warning.
2019-03-02 09:27:45 -06:00
imxrt_ocotp.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_periphclks.c
arch/arm/src/imxrt: Centralilze and standardize control of peripheral clocking. Add logic to initialize the DMAMUX.
2018-05-20 10:03:45 -06:00
imxrt_periphclks.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_rtc_lowerhalf.c
This commit addes support for the i.MXRT RTC. This initial commit is code complete (with limited featurs and options) but untested.
2018-06-27 11:19:12 -06:00
imxrt_serial.c
Merged in david_s5/nuttx/master_rt_fix (pull request #933)
2019-07-04 15:15:04 +00:00
imxrt_serial.h
…
imxrt_start.c
arch/arm/src: Remove dependency on CONFIG_ARCH_FPU for inclusion of nvic.h in all other *_start.c files.
2019-04-25 07:17:10 -06:00
imxrt_start.h
configs/imxrt1050-evk: Add knsh configuration.. PROTECTED mode NSH build.
2018-06-08 16:27:14 -06:00
imxrt_timerisr.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_usdhc.c
As promised, here's the patch that implements USDHC1 & 2 selection on the imxrt. If only one port is active (either 1 or 2) it will always be numbered as 0, if both are active then USDHC1 will be number 0, USDHC2 will be 1.
2019-07-07 17:07:04 -06:00
imxrt_usdhc.h
arch/arm/src/imxrt/imxrt_usdhc.c: Implements SDIO and Multi-card support for i.MX RT.
2019-07-03 12:42:09 -06:00
imxrt_userspace.c
…
imxrt_userspace.h
…
imxrt_wdog.c
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_wdog.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
imxrt_xbar.c
Merged imxrt1020 into master
2019-04-30 16:08:46 -06:00
imxrt_xbar.h
Rename arch/arm/src/imxrt/chip to arch/arm/src/imxrt/hardware. One more tine.
2019-05-24 18:54:55 -06:00
Kconfig
As promised, here's the patch that implements USDHC1 & 2 selection on the imxrt. If only one port is active (either 1 or 2) it will always be numbered as 0, if both are active then USDHC1 will be number 0, USDHC2 will be 1.
2019-07-07 17:07:04 -06:00
Make.defs
arch/arm/src/imxrt/imxrt_ehci.c: Add i.MXRT ECHI driver.
2019-06-29 18:39:42 -06:00