nuttx/arch/arm/src/sam34
2015-05-21 07:06:47 -06:00
..
chip Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
chip.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Kconfig SAMV7 Kconfig: Add peripheral selections 2015-03-05 13:51:39 -06:00
Make.defs SAMV71-XULT: Enable 64-bit floating point support 2015-03-11 12:30:14 -06:00
sam3u_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam3u_periphclks.h Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips 2014-02-22 10:38:25 -06:00
sam3x_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam3x_periphclks.h SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
sam4cm_freerun.c SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov. 2015-02-25 08:12:31 -06:00
sam4cm_freerun.h SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov. 2015-02-25 08:12:31 -06:00
sam4cm_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4cm_oneshot.c SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_oneshot.h SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_periphclks.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_supc.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4cm_supc.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_tc.c SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_tc.h SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_tickless.c Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
sam4e_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4e_periphclks.h SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
sam4l_clockconfig.c Add support for the SAM4L Xplained Pro I/O1 module 2013-06-15 10:56:08 -06:00
sam4l_gpio.c Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
sam4l_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4l_periphclks.c Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
sam4l_periphclks.h Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
sam4s_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam4s_periphclks.h SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
sam_aes.c Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
sam_aes.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_allocateheap.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_clockconfig.c SAMV71: Add Supply Controller register definition header file 2015-03-06 15:27:51 -06:00
sam_clockconfig.h Move SAM4L peripheral clock logic to a separate file 2013-06-05 18:48:30 -06:00
sam_cmcc.c SAM4E CMCC: Fix some errors introducted in last check-in 2014-03-26 16:32:16 -06:00
sam_cmcc.h SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
sam_dmac.c Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
sam_dmac.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_emac.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_emac.h SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
sam_gpio.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_gpio.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_gpioirq.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_hsmci.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_hsmci.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_irq.c SAMV7: Add interrupt-related logic 2015-03-07 11:16:44 -06:00
sam_lowputc.c SAM3/4 and SAMV7 UART: The IMR register is read-only. This means that sam_restoreints() does not actually re-enable UART interrupts. 2015-04-08 15:04:10 -06:00
sam_lowputc.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_mpuinit.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_mpuinit.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_periphclks.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam_rtc.c RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
sam_rtc.h RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
sam_rtt.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_rtt.h Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00
sam_serial.c SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov. 2015-05-21 07:06:47 -06:00
sam_spi.c wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
sam_spi.h Include chip/sam_spi.h in sam_spi.h 2015-03-20 11:09:36 -06:00
sam_start.c In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane 2015-05-07 20:36:08 -06:00
sam_tc.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_tc.h Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
sam_timerisr.c SAMV71: Add PMC register definition header files 2015-03-06 14:58:13 -06:00
sam_udp.c Fix a few typos in comments 2015-05-06 15:26:07 -06:00
sam_udp.h Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments 2015-03-05 06:41:14 -06:00
sam_userspace.c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_userspace.h Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_vectors.S Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
sam_wdt.c More places where watchodg mispelled 2015-04-15 21:36:30 -06:00
sam_wdt.h Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00