Commit Graph

431 Commits

Author SHA1 Message Date
Frank Benkert
0d3a7f4085 SAMV71-XULT: make usb composite configuration compiling again 2016-03-31 14:14:36 -06:00
Gregory Nutt
ad61b7ab3e Remove all references to CONFIG_SYSTEM_SDCARD 2016-03-30 17:53:19 -06:00
Gregory Nutt
0334d4b4cd Rename usbmsc_archinitialize to board_usbmsc_initialize 2016-03-25 12:09:37 -06:00
Gregory Nutt
39326f3b96 Rename all occurrences of composite_archinitialize to board_composite_initialize 2016-03-25 11:16:38 -06:00
Gregory Nutt
a2620361df Add basic definitions for control of USB devices via boardctl() 2016-03-25 10:51:57 -06:00
Gregory Nutt
e5b0c0e502 Remove most unused references to CONFIG_NET_MULTICAST. Rename other uses of CONFIG_NET_MULTICAST to avoid naming comflicts. 2016-03-20 13:15:58 -06:00
Gregory Nutt
156904d030 Update all Atmel SAMxxx configurations 2016-03-08 17:07:12 -06:00
Frank Benkert
3ffbfcd150 SAMV71 and SAME70: Place the Main Oscillator Enable in the board.h 2016-03-04 12:30:54 -06:00
Gregory Nutt
f5c987a627 Change name IMX to IMX1 in configuration variable names to make room for i.MX6 2016-02-28 15:19:19 -06:00
Gregory Nutt
12c14ee718 Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS 2016-02-26 16:45:29 -06:00
Gregory Nutt
2c97a9cfc1 SAMV71 and SAME70 board: In sam_appinit.c, need to include sys/types. hf CONFIG_BOARD_INITIAILZE is not defineed. Noted by Matt Poppe. 2016-02-24 09:43:37 -06:00
Gregory Nutt
d73b5db5b5 Refresh configuration 2016-02-23 09:22:01 -06:00
Frank Benkert
f57b233489 Fix some SPI initialize function name changes that were missed with global SPI name changes 2016-02-23 07:37:36 -06:00
Gregory Nutt
a3ec78f6c8 Add support for LED driver to the SAMV7-XULT board support 2016-02-20 13:21:19 -06:00
Gregory Nutt
b36674b9d8 Trivial change to some comments 2016-02-15 13:47:37 -06:00
Gregory Nutt
1699561bb6 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 12:37:46 -06:00
Gregory Nutt
6689a72fdb Refresh some configurations 2016-02-09 13:45:04 -06:00
Gregory Nutt
209edae56d Refresh a configuration 2016-02-08 15:11:26 -06:00
Gregory Nutt
9ed7d56a18 Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE 2016-02-04 12:14:17 -06:00
Gregory Nutt
d5cbcc1293 I2C Tool: Now that the I2C tool uses a character driver, the I2C character drivers must be initialized in board bring-up logic 2016-02-02 14:22:54 -06:00
Gregory Nutt
a135df609f Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming 2016-02-02 12:25:14 -06:00
Gregory Nutt
6b449ac409 The I2C_TRANSFER method is no longer optional 2016-01-31 14:15:32 -06:00
Gregory Nutt
1615a5ead0 Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:35:50 -06:00
Gregory Nutt
2591281375 Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 08:00:01 -06:00
Gregory Nutt
bfe51e3bc7 Move xyz_cxxinitialize.c from nuttx/configs/abc/src to apps/platform/abc/ (where xyz is the processor family and abc is the board) 2016-01-29 11:35:48 -06:00
Gregory Nutt
656e730f8f apps/system/ramtron has been removed. 2016-01-27 10:39:30 -06:00
Gregory Nutt
e792b09830 For SAM MCUs, rename up_spiinitialize to sam_spibus_initialize 2016-01-26 13:03:12 -06:00
Gregory Nutt
4819fc2e8d I2C: Eliminate the I2C_WRITEREAD method 2016-01-26 10:24:36 -06:00
Gregory Nutt
de50bc82a7 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:21:36 -06:00
Gregory Nutt
5e5cdd6ea4 Remove carriage returns from files 2016-01-23 15:23:02 -06:00
Gregory Nutt
075bc100a1 Update a configuration 2016-01-23 15:10:05 -06:00
Gregory Nutt
9535c909d3 Rename CONFIG_SYSTEM_INIFILE to CONFIG_FSUTILS_INIFILE 2016-01-20 17:11:48 -06:00
Gregory Nutt
004f4b8896 All bash scripts should be marked executable 2016-01-15 07:54:27 -06:00
Gregory Nutt
b7588c2674 Update a configuration 2016-01-14 17:54:45 -06:00
Gregory Nutt
2a5bdf230c Merge remote-tracking branch 'origin/master' into windeps 2016-01-09 16:38:13 -06:00
Gregory Nutt
9e548d34c3 mkdeps.sh and mkdeps.bat have been deleted. All configurations must now use the compiler mkeps prograqm 2016-01-09 16:06:15 -06:00
Gregory Nutt
e46cd30c14 Change use of mknulldeps.sh to mkwindeps.sh 2016-01-09 14:13:44 -06:00
Gregory Nutt
531c290009 Refresh a configuration 2015-12-22 11:06:20 -06:00
Gregory Nutt
b90f5ba7f4 Remove CONFIG_DISCRETE_IO from all defconfig files 2015-12-15 08:41:10 -06:00
Gregory Nutt
c41449b12a Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU 2015-12-14 13:56:56 -06:00
Gregory Nutt
54ea059beb Add new boardctl() command to set OS symbol table 2015-12-13 08:13:15 -06:00
Gregory Nutt
2d1f97282d SAMV71-XULT module configuration: Enable procfs 2015-12-12 19:00:01 -06:00
Gregory Nutt
8159029638 SAMV71-XULT: module configuration. Module cannot link with libc because it has out-of-range function calls 2015-12-12 13:59:20 -06:00
Gregory Nutt
d0a1e045a3 SAMV71-XULT: Simplify module configuration 2015-12-12 12:54:02 -06:00
Gregory Nutt
97f0d7425b SAMV71-XULT: Add another NSH configuration for text kernel modules 2015-12-12 09:31:22 -06:00
Gregory Nutt
e1d8ab37b5 Update README files 2015-12-08 07:32:47 -06:00
Gregory Nutt
a0e662f769 Refresh all configurations that have Telnetd enabled; those configurations now also need the telnet driver 2015-12-07 10:01:13 -06:00
Gregory Nutt
5adb77cb51 SAME70-Xplained: Updates using Arduino serial (UART3). 2015-12-05 16:13:29 -06:00
Gregory Nutt
5480d18026 Port logic to enable PCK6 in tickless mode from the samv71-xult to the same70-xplained 2015-12-04 12:37:00 -06:00
Gregory Nutt
2e8e851d99 SAMV7-XULT: If Tickless mode is selected then enabled PCK6 as a timer/counter clock source 2015-12-04 10:53:34 -06:00
Gregory Nutt
1f17ba860a Update some README files 2015-12-03 15:36:23 -06:00
Gregory Nutt
734144ad66 Update READMEs 2015-12-03 09:52:50 -06:00
Gregory Nutt
f04287305d Update README 2015-12-02 18:54:17 -06:00
Gregory Nutt
216f762e56 Update README 2015-12-02 15:54:20 -06:00
Gregory Nutt
4991f94792 Update README files 2015-12-02 09:22:26 -06:00
Gregory Nutt
99c460a696 Upate README files 2015-12-02 08:37:42 -06:00
Gregory Nutt
9a4192d22b Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general. 2015-12-01 07:47:41 -06:00
Gregory Nutt
fba809d7c8 Update README files 2015-11-30 17:37:01 -06:00
Gregory Nutt
2e78fc7178 configs/same70-xplained: Added a network enabled NSH configuration 2015-11-30 16:50:40 -06:00
Gregory Nutt
1f7df26f24 SAME70: Initialization has to be done a little differently because the board has no 32.768KHz crystal installed 2015-11-30 15:20:21 -06:00
Gregory Nutt
049616b40d SAME70 Xplained: Refresh configuration, enable PROCFS. Add logic to automatically mount procfs during initialization 2015-11-30 08:04:32 -06:00
Gregory Nutt
7a551aed6e STM32F4-Discovery: Refresh all configurations; enable PROCFS in all NSH configurations 2015-11-29 10:02:21 -06:00
Gregory Nutt
9701e66e5c SAMV71-XULT and STM32F4Discovery: Automatically mount procfs on startup 2015-11-29 09:47:36 -06:00
Gregory Nutt
1fceb9463e Update and enable procfs in all SAMV71-XULT configurations 2015-11-29 07:16:14 -06:00
Gregory Nutt
509028aa46 SAMV7-XULT: Enable procfs in the netnsh configuration 2015-11-27 12:31:51 -06:00
Gregory Nutt
651bd9e8ad Rename CONFIG_LOOP to CONFIG_DEV_LOOP 2015-11-25 17:11:27 -06:00
Frank Benkert
570b211f44 SAMV71-XULT: Fix some bad conditional compilation. From Frank Benkert 2015-11-24 06:25:27 -06:00
Gregory Nutt
abb7171a89 SAMV71-XULT: Add hooks for testing the PCF85263 RTC 2015-11-21 07:14:05 -06:00
Gregory Nutt
e9abfb0de8 SAMV71-XULT: Add support for an external I2C RTC 2015-11-19 14:52:52 -06:00
Gregory Nutt
aa812f3838 SAMV7-XULT: Add an NSH protected build configuration. Untested on initial commit. 2015-11-18 11:45:01 -06:00
Gregory Nutt
3d8d2e23c8 Refresh configuration 2015-11-17 14:06:09 -06:00
Gregory Nutt
06b48e5152 Update README 2015-11-13 15:56:16 -06:00
Gregory Nutt
dae831b7ba Update README file 2015-11-13 15:13:55 -06:00
Gregory Nutt
3fe1196ae8 SAMV71-XULT: Need to call sem_progmem_initialize() before using progmem MTD driver 2015-11-12 16:12:40 -06:00
Gregory Nutt
d20f61d2a8 SAMV7-XULT: Add support for a character device to access the on-chip FLASH programming memory 2015-11-12 16:02:18 -06:00
Gregory Nutt
c9fc120511 SAMV71-XULT: Allow support for SmartFS again. Problem fixed 2015-11-11 14:28:01 -06:00
Gregory Nutt
041089ba5a Update README 2015-11-10 18:08:21 -06:00
Gregory Nutt
fbf203bb1f SAMV71-XULT: Add support for the NXFFS file system on QuadSPI 2015-11-10 17:42:56 -06:00
Gregory Nutt
aca896045c SAMV71-XULT: Adapt for changes to s24fl_initialize() prototype 2015-11-10 11:31:42 -06:00
Gregory Nutt
e85baa6dde SAMV7-XULT: If no file system is specified for the S25FL1, wrap it as a character device 2015-11-09 09:33:41 -06:00
Gregory Nutt
aae9b2b40c Update README 2015-11-07 11:47:38 -06:00
Gregory Nutt
2b8ecb042b Fix naming of Spansion device, s25fl1 not st25fl1 2015-11-07 11:30:24 -06:00
Gregory Nutt
f2b3b65456 SAMV7-XULT: Update README 2015-11-07 11:25:58 -06:00
Gregory Nutt
4a28ff1abb SAMV71-XULT: Add support for SmartFS on QuadFLASH 2015-11-05 11:26:30 -06:00
Gregory Nutt
b28bd72a48 Standardize naming of user LEDs interface functions 2015-11-01 12:45:58 -06:00
Gregory Nutt
f56ed529e5 Remove prototypes for all user LED interfaces from board.h header files 2015-11-01 10:53:34 -06:00
Gregory Nutt
893bd9c7b5 Rename board_led_off to board_autoled_off 2015-11-01 09:10:08 -06:00
Gregory Nutt
78f19bbefb Rename board_led_on to board_autoled_on 2015-11-01 09:07:36 -06:00
Gregory Nutt
88c506d843 Rename board_led_initialize to board_autoled_initiaize 2015-11-01 09:03:01 -06:00
Gregory Nutt
b6930e442b Fix some spacing problems 2015-10-04 14:59:44 -06:00
Gregory Nutt
e6e46f830b Standardize the width of all comment boxes in C files 2015-10-02 17:43:08 -06:00
Gregory Nutt
e3d64722f0 SAMV71-XULT: Add Network monitor to netnsh configuration 2015-09-28 09:09:48 -06:00
Gregory Nutt
9cc454ca0a Set non-zero task name sizes in several configurations 2015-09-28 08:36:18 -06:00
Gregory Nutt
d86a9c9691 Refresh some configurations 2015-09-26 08:40:57 -06:00
Gregory Nutt
4f60d78d56 SAMV71-XULT: Add support for the NSH network monitor 2015-09-25 10:14:40 -06:00
Paul A. Patience
55d8aee826 Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience" 2015-09-04 16:42:34 -06:00
Paul A. Patience
81268bb75c Add -Wundef warning flag 2015-09-01 13:19:57 -04:00
Gregory Nutt
34cb87bfd0 SAMV71-XULT: Add logic to initialize the ST24FL1 QuadSPI FLASH 2015-08-31 09:23:38 -06:00
Gregory Nutt
f3f45a8fd8 Update README 2015-08-22 10:14:36 -06:00
Gregory Nutt
435277ed3a Update README 2015-08-21 12:32:34 -06:00
Gregory Nutt
88660657c2 Rename can_devinit() to board_can_initialize(). Hook in to boardctl() with BOARDIOC_CAN_INITIALIZE 2015-08-18 13:21:45 -06:00
Gregory Nutt
4a0f89168a SAMV71-XULT: Update README 2015-08-16 10:59:35 -06:00
Gregory Nutt
33664a3451 SAMV71-XULT: Add discussion of the SPI slave driver in the README file 2015-08-11 09:30:52 -06:00
Gregory Nutt
e3097a6028 Updte SAMV71-XULT README file 2015-08-11 07:52:20 -06:00
Gregory Nutt
b90f4a1299 Add stub SPI support for the SAMV71-XULT 2015-08-09 09:40:03 -06:00
Gregory Nutt
6f17af4b6f Refresh all SAMV7 configurations 2015-08-09 09:20:29 -06:00
Gregory Nutt
3cb9af4dd9 Update README 2015-08-05 09:16:56 -06:00
Gregory Nutt
b80d9daf36 Update a README file 2015-08-05 08:21:50 -06:00
Gregory Nutt
6f0cbfbd64 SAMV71-XULT: Add support for MCAN1 loopback test 2015-08-05 08:05:26 -06:00
Gregory Nutt
81dcadf70a Add a fiew more SAMV7 clocking definitions 2015-07-31 11:17:26 -06:00
Gregory Nutt
650ba80ac0 All setenv.sh files updated to use the path to the ARM 4.0 2015q2 toolchain 2015-07-31 08:40:40 -06:00
Gregory Nutt
75595ddfef Remove refereneces to DNSCLIENT IPv4/IPv6 2015-07-12 14:13:18 -06:00
Gregory Nutt
42f69ba42f Rename CONFIG_NETUTILS_DNS* to CONFIG_NETDB_DNS* to reflect the movement of the DNS server from apps/netutils to nuttx/libc/netdb 2015-07-10 12:09:58 -06:00
Gregory Nutt
f7ba1b1eeb Remove all references to the dedunct CONFIG_SYSTEM_SYSINFO configuration from all defconfig files 2015-07-04 15:19:11 -06:00
Gregory Nutt
d1ab9c2e0a Remove the configs/ directory 2015-06-29 13:12:29 -06:00
Gregory Nutt
7214e52fb2 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Efim Monjak
e187d6eb8b In ARMV71-Xplained clock configuration, divider was set to 25 to get 25*12MHz=300MHz CPU clock. The correct multiplier is 24 becaue the calculatin if (24+1)*12MHz. So the board was running at 312MHz. From Efim Monjak. 2015-06-26 06:52:37 -06:00
Efim Monjak
5a4bb1714d In ARMV71-Xplained clock configuration, divider was set to 25 to get 25*12MHz=300MHz CPU clock. The correct multiplier is 24 becaue the calculatin if (24+1)*12MHz. So the board was running at 312MHz. From Efim Monjak. 2015-06-26 06:52:37 -06:00
Gregory Nutt
c1990bb2ea Update README and TODO list 2015-06-25 13:39:57 -06:00
Gregory Nutt
ce7955bae8 Update README and TODO list 2015-06-25 13:39:57 -06:00
Gregory Nutt
612bc18e90 Refresh SAMV71-Xult configurations 2015-06-17 12:01:33 -06:00
Gregory Nutt
deb46613d7 Refresh SAMV71-Xult configurations 2015-06-17 12:01:33 -06:00
Gregory Nutt
7d971aa4a2 SAMV71-XULT: Fix a warning with button support is disabled 2015-06-03 08:36:19 -06:00
Gregory Nutt
3ee2902c3e SAMV71-XULT: Fix a warning with button support is disabled 2015-06-03 08:36:19 -06:00
Gregory Nutt
add36cc3de Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis 2015-05-30 10:00:54 -06:00
Gregory Nutt
fce87336a4 Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis 2015-05-30 10:00:54 -06:00
Gregory Nutt
0dbf579aa8 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
4adda9d428 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
2870779cc3 Update README 2015-05-13 13:30:26 -06:00
Gregory Nutt
416af1b54f Update README 2015-05-13 13:30:26 -06:00
Gregory Nutt
91ada88a2f SAMV71-XULT: Reads from LCD memory do not work. Change configuration so that the LCD is treated as write-only 2015-05-13 11:47:47 -06:00
Gregory Nutt
98ed7bab0e SAMV71-XULT: Reads from LCD memory do not work. Change configuration so that the LCD is treated as write-only 2015-05-13 11:47:47 -06:00
Gregory Nutt
f8bd2f4c4b Update README 2015-05-13 10:38:54 -06:00
Gregory Nutt
5e756deef5 Update README 2015-05-13 10:38:54 -06:00
Gregory Nutt
fc0d6b5123 SAMV71-XULT: Minor updates to nxwm configuration. There are still issues 2015-05-13 10:09:32 -06:00
Gregory Nutt
5d55ef59b6 SAMV71-XULT: Minor updates to nxwm configuration. There are still issues 2015-05-13 10:09:32 -06:00
Gregory Nutt
b30ff7ed58 SAMV71-Xult: Add missing NxWM configuration settings; Fix cloning error in C++ support 2015-05-12 19:43:20 -06:00
Gregory Nutt
9e84252668 SAMV71-Xult: Add missing NxWM configuration settings; Fix cloning error in C++ support 2015-05-12 19:43:20 -06:00
Gregory Nutt
3bbacad12b SAMV7-XULT: Add C++ support 2015-05-12 19:12:25 -06:00
Gregory Nutt
f8a51bd706 SAMV7-XULT: Add C++ support 2015-05-12 19:12:25 -06:00
Gregory Nutt
b057ebb6f1 SAMV71-XULT: Add an NxWM configuration (unverified on initial commit) 2015-05-12 18:57:30 -06:00
Gregory Nutt
0cabda1e5b SAMV71-XULT: Add an NxWM configuration (unverified on initial commit) 2015-05-12 18:57:30 -06:00
Gregory Nutt
4c72b2eb1a Update ChangeLog and README 2015-05-12 17:59:45 -06:00
Gregory Nutt
390ae171ba Update ChangeLog and README 2015-05-12 17:59:45 -06:00
Gregory Nutt
dcdc23252c Add configuration option to select touchscreen X/Y 2015-05-12 17:56:35 -06:00
Gregory Nutt
7942c2f6d5 Add configuration option to select touchscreen X/Y 2015-05-12 17:56:35 -06:00
Gregory Nutt
4883e4494b Refresh configuration 2015-05-12 17:56:34 -06:00
Gregory Nutt
5da82577d7 Refresh configuration 2015-05-12 17:56:34 -06:00
Gregory Nutt
c132f4a520 Refresh configuration 2015-05-12 17:56:33 -06:00