Author: Gregory Nutt <gnutt@nuttx.org>
A few trivial updates from review of changes.
Remove references to NRF52-PCA10040 from documentation. Replace with NRF52-generic.
Remove configs/nrf52-pca10040/ Replaced with configs/nrf52-generic.
Author: Zou Hanya <hanyazou@gmail.com>
Improve LED handling #if~#endif in nrf52_autoleds.c and nrf52_userleds.c
Add Adafruit Feather nRF52 board LED support
Add Adafruit Feather nRF52 board
Add nrf52-generic
Replace 'pca10040' with 'generic'
Copy from nrf52-pca10040 to nrf52-generic
Squashed commit of the following:
arch/arm/src/max326xx and configs/max32660-evsys/nsh/defconfig: Work out some issues related to MAX326xx configuration.
configs/max32660-evsys: Add unverified board support framework.
stm32/stm32_adc: major refator
stm32/stm32_adc: use STM32 ADC IP core version and ADC available functions instead of chip family names in conditional compilation
stm32/chip: replace family specific ADC headers with STM32 ADC IP core version headers
stm32/stm32_adc: configurable sample time supported for all chips, not only L1
stm32/stm32_adc: enable/disable interrupts supported for all chips, not only L1
stm32/stm32_adc: resolution configuration
stm32/stm32f33xxx_adc: remove wrong assertion
configs/nucleo-f303ze: support for ADC and ADC example
configs/stm32f429i-disco: support for ADC and ADC example
Approved-by: GregoryN <gnutt@nuttx.org>
NuttX: STM32F407VG has only one DAC
NDAC=2 causes compilation error when trying to use e.g. STM32_DAC1_CR macro.
Approved-by: GregoryN <gnutt@nuttx.org>
imxrt:Clock config fixes and board.h sets sources and divisors
* imxrt:clockconfig bug fix & Board config set clocks
Fixed logic that was not clearing bits as ~ was
mising in &= mask operations.
Use valuse from the board.h file so set the Mux that
selects the clock sources.
Use board defined PODF values to select clock.
Only configure USDHC2 clocks when board defines clocks.
* imxrt1050-evk:Board setting used to set LSPI and USDHC Clocks
Approved-by: GregoryN <gnutt@nuttx.org>
When MIPS port is built for microMIPS and then loaded as an application, the __start entry point is entered in microMIPS mode, but the CPU core initialization code there misses to set the config3ISAOnExc bit to 1. Subsequently, exceptions are entered in MIPS32 mode, but the code base was built for microMIPS.
This change is needed specifically for the case where a bootloader sets the SPE bit before starting NuttX. In that case, the test in the SPI driver is bogus. This change fixes that by assuring that NuttX has booted and initialized at least once (whether or not SPE is set) before the driver starts refusing to initialize.
arch/arm/stm32*: Don't rely on SPI_CR1_SPE to determine if peripheral has been initialized yet.
Approved-by: GregoryN <gnutt@nuttx.org>
Fixes Kconfig options to include all STM32F20XX processors, not just STM32F207
* arch/arm/src/stm32: Fixes Kconfig options to include all STM32F20XX processors, not just STM32F207
* arch/arm/src/stm32: Removes redundant STM32_STM32F429 depends from Kconfig. STM32F4XXX already does this
Approved-by: GregoryN <gnutt@nuttx.org>
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Completes review of configs/gapuino.
arch/risc-v/include/gap8/chip.h: Replace the moved chip.h header file with a dummy chip.h header file just to keep the system happy.
Move include/gap8/chip.h to src/gap8/chip.h. Internal details should not be exposed outside of arch/ and configs/. Review all headers files in src/gap8
Review of arch/risc-v/include.
Author: hhuysqt <hyq9606@126.com>
corrected author and email
Add app initialization, add signal support, cleanup irq context and configs
fix some warnings
gapuino initial port
GAP8 initial port
