Gregory Nutt
|
d64e8e6732
|
Include chip/sam_spi.h in sam_spi.h
|
2015-03-20 11:09:36 -06:00 |
|
Gregory Nutt
|
7242a6194c
|
SAMA5D3: Fix typos in timer/counter header file. From Bob Doiron
|
2015-03-20 09:19:10 -06:00 |
|
Gregory Nutt
|
d877b1bd50
|
STM32 RTC lower-half: Fix some errors that cause compilation failures. From shilo.xyz
|
2015-03-19 12:56:47 -06:00 |
|
Gregory Nutt
|
08fcf035dd
|
SAMV5 EMAC: A few more fixes. Neccessary but not sufficient
|
2015-03-19 08:54:50 -06:00 |
|
Gregory Nutt
|
256da4837e
|
SAMV7 Ethernet: Fix an order problem that left RX and TX disabled
|
2015-03-18 18:07:07 -06:00 |
|
Gregory Nutt
|
dd50e03666
|
SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts
|
2015-03-18 17:23:40 -06:00 |
|
Gregory Nutt
|
6763128345
|
SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts
|
2015-03-18 15:55:00 -06:00 |
|
Gregory Nutt
|
6dd93c801d
|
PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane
|
2015-03-17 14:50:11 -06:00 |
|
Gregory Nutt
|
714af6ebb8
|
SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM
|
2015-03-17 14:29:41 -06:00 |
|
Gregory Nutt
|
26923b39de
|
SAMV7 EMAC: Fix range of MCK dividers
|
2015-03-17 11:19:46 -06:00 |
|
Gregory Nutt
|
42c33033a8
|
SAMV7: Use D-Cache clean/flush/invalidate by range in EMAC and XDMAC drivers
|
2015-03-17 09:28:27 -06:00 |
|
Gregory Nutt
|
fdbbab013b
|
Break ARMv7E-M cache operations into separate files; Finish the unimplemented cache operations
|
2015-03-17 08:48:41 -06:00 |
|
Gregory Nutt
|
32aadd9cc2
|
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
|
2015-03-16 13:51:37 -06:00 |
|
Gregory Nutt
|
0abe4e701b
|
SAMV7: Add Ethernet MAC register definition header file
|
2015-03-16 11:46:20 -06:00 |
|
Gregory Nutt
|
28ead380ea
|
This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled.
|
2015-03-15 12:17:39 -06:00 |
|
Gregory Nutt
|
5fcdb09791
|
SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working.
|
2015-03-15 09:35:48 -06:00 |
|
Gregory Nutt
|
f932b26db1
|
Add umount2(). umount() is now a macro that just calls umount2() with flags = 0.
|
2015-03-14 16:48:45 -06:00 |
|
Gregory Nutt
|
9e2587ffe9
|
SAMV7 XDMA: Fix a problem with invalidating the cache on RX DMA
|
2015-03-14 15:25:32 -06:00 |
|
Gregory Nutt
|
dd342bb4a7
|
EFM32: Add I2C driver. From Pierre-noel Bouteville
|
2015-03-14 14:47:53 -06:00 |
|
Gregory Nutt
|
3b0615ece8
|
SAMV7: More SDRAM logic. It does still does not work
|
2015-03-14 13:27:00 -06:00 |
|
Gregory Nutt
|
cc497202ed
|
SAMV71-XULT: Add support for SDRAM (unverified)
|
2015-03-14 11:00:46 -06:00 |
|
Gregory Nutt
|
cbdaa0dc77
|
Include correct chip file
|
2015-03-14 09:15:11 -06:00 |
|
Gregory Nutt
|
867bd20f5c
|
SAMV7: Add SDRAMC register definition header file
|
2015-03-14 09:13:51 -06:00 |
|
Gregory Nutt
|
9c5205142f
|
SAMV7 HSMCI: Change system bus interfaces seems to eliminate DMA failures.
|
2015-03-13 14:35:36 -06:00 |
|
Gregory Nutt
|
0b64c51a13
|
Minor updates from initial debugging.
|
2015-03-13 13:46:27 -06:00 |
|
Gregory Nutt
|
db786ea654
|
SAMV7 HSMCI: Reading response registers at the wrong time can cause loss of response data.
|
2015-03-13 12:46:33 -06:00 |
|
Gregory Nutt
|
ad216583b7
|
SAMV7: Fix some cloning errors. SAMA5->SAM7
|
2015-03-13 10:38:10 -06:00 |
|
Gregory Nutt
|
74548a5ed4
|
Fix a typo in a Cortex-M7 address
|
2015-03-13 10:37:21 -06:00 |
|
Gregory Nutt
|
ce0021e753
|
STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna
|
2015-03-13 07:18:21 -06:00 |
|
Gregory Nutt
|
6cb5b48300
|
STM32: Fix RX DMA setup for UART5. From Jussi Kivilinna.
|
2015-03-13 07:06:46 -06:00 |
|
Gregory Nutt
|
4580af6d0b
|
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
|
2015-03-12 18:03:41 -06:00 |
|
Gregory Nutt
|
743fd5ac50
|
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
|
2015-03-12 16:00:38 -06:00 |
|
Gregory Nutt
|
da3233a527
|
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
|
2015-03-12 12:27:06 -06:00 |
|
Gregory Nutt
|
109b9910f6
|
SAMV7: Add TWI/I2C driver (untested)
|
2015-03-12 10:58:11 -06:00 |
|
Gregory Nutt
|
00a841c417
|
SAMV7: Add SPI header files and driver
|
2015-03-12 09:12:37 -06:00 |
|
Gregory Nutt
|
0b8248b33c
|
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
|
2015-03-12 08:08:50 -06:00 |
|
Gregory Nutt
|
9997fa77ad
|
ARMv7-M MPU. Bad syntax will cause failure to write the correct value to the MPU_RASR register. From Juha Niskanen
|
2015-03-12 08:00:53 -06:00 |
|
Gregory Nutt
|
99f4e31b69
|
stm32_i2c: Add missing NULL check. From Juha Niskanen
|
2015-03-12 07:53:41 -06:00 |
|
Gregory Nutt
|
70e7dcba71
|
Bringing PPPD yet closer to the NuttX coding style
|
2015-03-11 18:47:04 -06:00 |
|
Gregory Nutt
|
90bc4b81ee
|
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
|
2015-03-11 14:41:58 -06:00 |
|
Gregory Nutt
|
3d60cc7768
|
SAMV7: Correct low-level console output
|
2015-03-11 14:39:32 -06:00 |
|
Gregory Nutt
|
ca8165dd10
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
Gregory Nutt
|
da844f1a88
|
SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7
|
2015-03-11 12:16:27 -06:00 |
|
Gregory Nutt
|
508d96b571
|
SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs
|
2015-03-11 11:23:19 -06:00 |
|
Gregory Nutt
|
e8e357cc1d
|
PIC32MZ: Fixes from Kristopher Tate
|
2015-03-11 10:25:51 -06:00 |
|
Gregory Nutt
|
65e34be9b4
|
Update COPYING file with special license requirements for PPPD
|
2015-03-11 09:14:15 -06:00 |
|
Gregory Nutt
|
834072815b
|
SAMV71-XULT: Some bugfixes from early bring-up work
|
2015-03-10 16:11:28 -06:00 |
|
Gregory Nutt
|
fe1aaf76fc
|
Tiva TimerLib: Fix a typo in peripheral waiting logic: gptm, not gpio. From Bradley Noyes
|
2015-03-10 12:16:40 -06:00 |
|
Gregory Nutt
|
426888efb5
|
SAMV7: Add logic to enable/disable TCMs
|
2015-03-10 11:32:05 -06:00 |
|
Gregory Nutt
|
36e88e504a
|
SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration
|
2015-03-10 07:50:32 -06:00 |
|
Gregory Nutt
|
26dec2c333
|
Cosmetic changes to conditional compilation
|
2015-03-09 18:14:31 -06:00 |
|
Gregory Nutt
|
4e306087af
|
Remove some traiilng whitespace
|
2015-03-09 15:42:35 -06:00 |
|
Gregory Nutt
|
e39077775d
|
Cortex-M7: Add cache operations
|
2015-03-09 15:42:07 -06:00 |
|
Gregory Nutt
|
d3033efa9c
|
Cortex-M7: Add cache operations
|
2015-03-09 15:41:48 -06:00 |
|
Gregory Nutt
|
66d48615c6
|
SAMV7: Leverage XDMAC driver from the SAMA5D4.
|
2015-03-09 10:11:12 -06:00 |
|
Gregory Nutt
|
cfca6b08c5
|
SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file
|
2015-03-09 08:23:09 -06:00 |
|
Gregory Nutt
|
5515f26de4
|
SAMV7: Add GPIO interrupt support
|
2015-03-08 19:32:05 -06:00 |
|
Gregory Nutt
|
6fdbbe6c4b
|
SAMV71: Add GPIO library support
|
2015-03-08 19:12:30 -06:00 |
|
Gregory Nutt
|
9cb9e8102c
|
SAMV7: Add PIO register definition header file
|
2015-03-08 17:34:26 -06:00 |
|
Gregory Nutt
|
73bd97e537
|
SAMV71: Add pin mapping definitions
|
2015-03-08 13:24:32 -06:00 |
|
Gregory Nutt
|
55c5d04c84
|
SAMV71: Fix a few typos; Use factional value in BAUD calculation
|
2015-03-08 12:27:55 -06:00 |
|
Gregory Nutt
|
2cb3c03678
|
SAMV7: Add serial driver
|
2015-03-08 10:15:42 -06:00 |
|
Gregory Nutt
|
6c608a05c7
|
SAMV71: Add UART register definition header file
|
2015-03-08 08:42:22 -06:00 |
|
Gregory Nutt
|
fe629e76b3
|
EFM32 updates from Pierre-noel Bouteville
|
2015-03-08 07:12:47 -06:00 |
|
Gregory Nutt
|
967e8bbc7b
|
SAMV71-XULT: Add heap allocation logic
|
2015-03-07 11:46:54 -06:00 |
|
Gregory Nutt
|
adbc25a05c
|
SAMV7: Add interrupt-related logic
|
2015-03-07 11:16:44 -06:00 |
|
Gregory Nutt
|
b3403dee6a
|
SAMV7: Add basic clock and timer ISR configuration logic
|
2015-03-07 10:32:47 -06:00 |
|
Gregory Nutt
|
839dd9baef
|
SAMV71: Add EEFC register definition header file
|
2015-03-06 16:39:18 -06:00 |
|
Gregory Nutt
|
8cb93302e9
|
SAMV71: Add Supply Controller register definition header file
|
2015-03-06 15:27:51 -06:00 |
|
Gregory Nutt
|
3440c94861
|
SAMV71: Add PMC register definition header files
|
2015-03-06 14:58:13 -06:00 |
|
Gregory Nutt
|
36d161fc2b
|
SAMV71: More updates on the way to a clean build. Still more to do to complete that journey
|
2015-03-06 12:13:09 -06:00 |
|
Gregory Nutt
|
4cde63eead
|
Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71.
|
2015-03-06 10:53:57 -06:00 |
|
Gregory Nutt
|
d18ed4569c
|
Add a bare bones framework that will do nothing more than support configuration for the Atmel SAMV71 Xplained Ultra board. Very much a work in progress.
|
2015-03-06 08:56:44 -06:00 |
|
Gregory Nutt
|
6cd282ccc2
|
Add new common lazy FPU state saving option for ARMv7-M. Not yet verified
|
2015-03-06 08:26:43 -06:00 |
|
Gregory Nutt
|
2d666e897b
|
SAM3/4: Leverage some start-up logic from STM32
|
2015-03-05 17:45:13 -06:00 |
|
Gregory Nutt
|
eaecd27998
|
SAMV7: Add SAMV71 peripheral IDs and interrupt vector definitions
|
2015-03-05 16:34:22 -06:00 |
|
Gregory Nutt
|
4bbb561193
|
Fix typo in file name
|
2015-03-05 15:48:48 -06:00 |
|
Gregory Nutt
|
6c8366ef5f
|
SAMV71: Add memory map header file
|
2015-03-05 15:47:29 -06:00 |
|
Gregory Nutt
|
58c7e16960
|
SAMV7 Kconfig: Add peripheral selections
|
2015-03-05 13:51:39 -06:00 |
|
Gregory Nutt
|
f573dab044
|
Make ARM build system Cortex-M7 ready
|
2015-03-05 11:25:27 -06:00 |
|
Gregory Nutt
|
eedd5e0bbb
|
Add basic build directories and configuration logic for the SAMV7 family
|
2015-03-05 10:00:24 -06:00 |
|
Gregory Nutt
|
b5bfb6762d
|
Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes
|
2015-03-05 08:08:11 -06:00 |
|
Gregory Nutt
|
404fef74d9
|
Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments
|
2015-03-05 06:41:14 -06:00 |
|
Gregory Nutt
|
76007d28f5
|
Add support for dumping board-specific information on assertion. From David Sidrane
|
2015-03-04 07:00:29 -06:00 |
|
Gregory Nutt
|
38f250cde3
|
Add missing SPI callback functions to the STM32 SPI driver. From Freddie Chopin
|
2015-03-04 06:52:46 -06:00 |
|
Gregory Nutt
|
cb5cb96bc9
|
Fix issues when AES support was added for the STM32L1. From Juha Niskanen
|
2015-03-04 06:38:03 -06:00 |
|
Gregory Nutt
|
2fc99df452
|
Add support for new STM32L1 chip variant. From Juha Niskanen
|
2015-03-04 06:33:44 -06:00 |
|
Gregory Nutt
|
c880446962
|
STM32 BBSRAM driver updated by David Sidrane
|
2015-03-03 16:05:24 -06:00 |
|
Gregory Nutt
|
76e1dd4e56
|
PIC32MZ: Add DMA register definition header file
|
2015-03-03 15:57:47 -06:00 |
|
Gregory Nutt
|
7a05d4907f
|
PIC32MZ: Add I2C register definition file
|
2015-03-03 14:40:09 -06:00 |
|
Gregory Nutt
|
fa3d216185
|
PIC32MX: Copy some of the configuration updates from PIC32MZ
|
2015-03-03 13:16:58 -06:00 |
|
Gregory Nutt
|
30e369dc65
|
PIC32MZ SPI: Implement exchange() method; update SPI_REGDEBUG configuration and clean up implementation
|
2015-03-03 12:23:27 -06:00 |
|
Gregory Nutt
|
74ab89d6fb
|
PIC32MX SPI: Fix typos in Kconfig; Move constant SPI config data to ROM-able const structure
|
2015-03-03 10:06:49 -06:00 |
|
Gregory Nutt
|
ffee793745
|
PIC32MZ: Default SPI configuration setting is backward; refresh configuration
|
2015-03-03 09:16:10 -06:00 |
|
Gregory Nutt
|
39e5100bdf
|
PIC32MZ: Add a basic SPI driver
|
2015-03-03 08:58:27 -06:00 |
|
Gregory Nutt
|
032155078b
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
Gregory Nutt
|
3df273658c
|
PIC32MZ Starter Kit: Add support for on-board buttons
|
2015-03-02 10:01:10 -06:00 |
|
Gregory Nutt
|
a219dd1a58
|
PIC32MZ: Implement support for IO port interrupts
|
2015-03-02 09:24:43 -06:00 |
|
Gregory Nutt
|
06f8baf709
|
PIC32MZ: Add ability to select flash ECC options
|
2015-03-01 09:08:44 -06:00 |
|
Gregory Nutt
|
0772ca5702
|
PIC32MZ: Fix yet another error in DEVCFG settings
|
2015-02-28 14:35:40 -06:00 |
|