Summary:
- I noticed that lc823450-xgevk does not boot due to the recent
changes on g_current_regs
- This PR fixes this issue
Impact:
- None
Testing:
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
1. some arm instructions are not compatible with arch tlsr:
{standard input}: Assembler messages:
{standard input}:53: Error: bad instruction `svc #0'
2. remove unsupport compile option
cc1: error: unrecognized command line option "-mlittle-endian"
Signed-off-by: chao an <anchao@xiaomi.com>
Reference:
https://developer.arm.com/documentation/dui0474/m/image-structure-and-generation/section-placement-with-the-linker/section-placement-with-the-first-and-last-attributes
CAUTION:
FIRST and LAST must not violate the basic attribute sorting order. For example, FIRST RW is placed after any read-only code or read-only data.
arm-none-eabi-readelf -aS arm_vectors.o
1. Without const:
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[ 3] .vectors PROGBITS 00000000 000034 00011c 00 WA 0 0 4
2. const symbol:
[ 3] .vectors PROGBITS 00000000 000034 00011c 00 A 0 0 4
Regression by:
| commit 229b57d6cb
|
| arch/armv[6|7|8]-m: Move _vectors to arm_internal.h to avoid the duplication
|
| and change the type of _vectors from uint32_t to const void *
|
| Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
In file included from ./armv7-r/arm_l2cc_pl310.c:41:
./armv7-r/l2cc_pl310.h:38:10: fatal error: chip/chip.h: No such file or directory
38 | #include "chip/chip.h"
| ^~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
stderr is a file stream pointer not a function name. Having
it in the renaming list may introduce linking error.
Signed-off-by: gaojiawei <gaojiawei@xiaomi.com>
Config option IMXRT_ADCx_ETC can now be used to select an external HW
trigger to be used instead of continous trigger. Continous trigger is
used if IMXRT_ADCx_ETC = -1 (default option). Otherwise the source signal
is routed through XBAR and used as a trigger.
Hardware triggering is currently limited to maximum of 8 channels.
HW trigger is automatically disabled if there are more than 8 channels.
The external triggering was tested with PWM signal as a source.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
1.
make[1]: *** No rule to make target 'tms570_spi.c', needed by '.depend'. Stop.
2.
In file included from armv7-r/arm_gicv2.c:36:
armv7-r/gic.h: In function 'arm_gic_nlines':
armv7-r/mpcore.h:63:29: error: 'CHIP_MPCORE_VBASE' undeclared (first use in this function)
63 | #define MPCORE_ICD_VBASE (CHIP_MPCORE_VBASE+MPCORE_ICD_OFFSET)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
since armv7-r does not support kernel mode
./armv7-r/arm_syscall.c:36:10: fatal error: addrenv.h: No such file or directory
36 | #include "addrenv.h"
| ^~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
Summary:
- Currently, CONFIG_ARCH_PGPOOL_MAPPING=y is necessary for
CONFIG_BUILD_KERNEL=y.
- This commit removes the code for CONFIG_ARCH_PGPOOL_MAPPING=n
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This commit supplements commit 7d877fbb. External sync mode is now
disabled if XBAR connection fails and config options are used directly
in sync_src variable and passed to XBAR macro only when needed. The first
option could caused an undefined behaviour when sync_src was equal to -1
(external sync not used)
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
- Because a context switch issue still exists with FPU
the configs should be removed until it works.
Impact:
- None
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Otherwise, after the rx error occur, the tx output will be
out of sequence, for example:
normal log:
[ 30.163000] 12345678abcdefgh
[ 30.666000] 12345678abcdefgh
[ 31.169000] 12345678abcdefgh
[ 31.672000] 12345678abcdefgh
[ 32.175000] 12345678abcdefgh
[ 32.678000] 12345678abcdefgh
[ 33.181000] 12345678abcdefgh
error log:
he 7 .20]0003 127456c8abgdefch
gde [6.707002] 16345b78afcde
fcde
fghe10010] 5234a678ebcd
77 713 00]41238567dabchefgd
che 7 .21]0003 127456c8abgdefch
gde [8.709002] 16345b78afcde
fcde
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Since tlsr arch support A/B bank, the hardware support
relative addr to load or store, but for flash read,
must use absolute addr. also combine with flash_<*>_method.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fix Compile error from Armclang compiler(AC6):
Error: L6218E: Undefined symbol arm_vectoraddrexcption (referred from arm_vectoraddrexcptn.o).
Signed-off-by: chao an <anchao@xiaomi.com>
undeclare TCGETS on esp32c3 when enable usbserial and termios
error:
chip/esp32c3_usbserial.c: In function 'esp32c3_ioctl':
chip/esp32c3_usbserial.c:411:10: error: 'TCGETS' undeclared (first use in this function)
Situation:
Assume we have 2 cpus, and busy run task0.
CPU0 CPU1
task0 -> task1 task2 -> task0
1. remove task0 form runninglist
2. take task1 as new tcb
3. add task0 to blocklist
4. clear spinlock
4.1 remove task2 form runninglist
4.2 take task0 as new tcb
4.3 add task2 to blocklist
4.4 use svc ISR swith to task0
4.5 crash
5. use svc ISR swith to task1
Fix:
Move clear spinlock to the end of svc ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
Add support for MCUBoot.
Two new configurations are added:
- mcuboot-loader: mcuboot-loader app used as a bootloader.
main_mcuboot_loader as entrypoint
- mcuboot-app: used as mcuboot agent app. Needs to be
signed manually through "imgtool sign --pad --align 4 -v 0 -s
auto -H 0x200 --pad-header -S 0xc0000 nuttx.hex nuttx_sign.bin"
Signed-off-by: Andres Sanchez <tito97_sp@hotmail.com>
This commit allows the PWM modules to be synchronized by an external
signal (other PWM module for example). The sync source can be selected
from configuration.
PWM module can also now generate a trigger when its timer reaches the duty
cycle. This trigger is used for the synchronization of other modules. It
can also be used for triggering ADC for example in the future.
Thanks to Rastislav Pavlanin and Jan Spurek from NXP support for
suggestion which helped to solve the inter-module PWM synchronization
task.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Simplify the clock mode from the board.h -files. Also make the
SD clock definable as well.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Some related products, such as Aries m100pfs, don't support eMMC
speeds up to 200MHz. Thus, provide option to select slower clock.
This has only to do with the clocking, no CMD6 is sent to select
high speed modes.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
The L3 mapping function was just way too simplistic. Depending on memory
configuration it either works or not.
Noticed that with icicle:pnsh the software crashes due to instruction
page fault, reason is the map_region() implementation that does not
work for regions that are not aligned to 2MB (the L2 page size).
Implemented an extremely simplistic page table allocator for the L3
references, that should once and for all get rid of the L3 mapping issue.
NOTE: gran_alloc() cannot be used at this point, it is too early for it.
If the system starts up using the SD-card, and later wants
to switch to use the eMMC, it's not going to happen. SD-card
will be kept selected within the FPGA making the transition
fail.
It's been possible to switch from eMMC to SD, but now the
transition is possible for both directions.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Modify the file according to the checks
update the board config files, and modify the gd32f4xx_progmem.c
Add chip GD32F450 of GD32MCU
delete the micro FAR, modify code style
Add chip GD32F450 of GD32MCU
Issuing the following commands doesn't succeed:
- conn
- disconn
- conn
This USB driver doesn't even disconnect without this patch.
If the USB driver has been started from another hart, closing it
will not disable the PLIC interrupt. This means it's possible many
harts get the USB interrupt and thus make the USB look very unstable.
Fix these problems by disconnecting the USB via the USB_POWER
register at shutdown and disabling the interrupt at shutdown. Also
clear the software internals via the mpfs_sw_setup() for the conn /
disconect loop to succeed.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
The underlying hardware supports 9 endpoints:
- EP0
- 4x IN EPs
- 4x OUT EPs
Currently the driver assumes every EP number is unique. This limits
the amount of EPs to 1 + 4 = 5. Utilize the EPs in such a manner
that all may be used.
Also fix a few error handling related bugs. Update the composite
driver to match the current situation as well.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This commit enhances imxrt encoder driver with index capture support.
The index is captured when the index interrupt occurs and can be passed
to application layer with QEIOC_GETINDEX ioctl call.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
==2117790==ERROR: AddressSanitizer: global-buffer-overflow on address 0x64d9e3c0 at pc 0x59ac4e16 bp 0xcefe8058 sp 0xcefe8048
READ of size 1 at 0x64d9e3c0 thread T0
#0 0x59ac4e15 in up_nputs sim/up_nputs.c:54
#1 0x59a67e4c in syslog_default_write syslog/syslog_channel.c:220
#2 0x59a67823 in syslog_default_write syslog/syslog_write.c:101
#3 0x59a67f10 in syslog_write syslog/syslog_write.c:153
#4 0x59a651c3 in syslogstream_flush syslog/syslog_stream.c:60
#5 0x59a6564e in syslogstream_addchar syslog/syslog_stream.c:104
#6 0x59a6576f in syslogstream_putc syslog/syslog_stream.c:140
#7 0x5989fc4d in vsprintf_internal stdio/lib_libvsprintf.c:952
#8 0x598a1298 in lib_vsprintf stdio/lib_libvsprintf.c:1379
#9 0x59a64ea4 in nx_vsyslog syslog/vsyslog.c:223
#10 0x598a601a in vsyslog syslog/lib_syslog.c:68
#11 0x59b0e3dc in AIOTJS::logPrintf(int, char const*, ...) src/ajs_log.cpp:45
#12 0x59b03d56 in jse_dump_obj src/jse/quickjs/jse_quickjs.cpp:569
#13 0x59b03ea1 in jse_dump_error1(JSContext*, unsigned long long) src/jse/quickjs/jse_quickjs.cpp:602
#14 0x59b03dd9 in jse_dump_error(JSContext*) src/jse/quickjs/jse_quickjs.cpp:591
#15 0x59bed615 in ferry::DomComponent::callHook(char const*) src/framework/dom/component.cpp:65
#16 0x59bfe0ff in ferry::DomComponent::initialize() src/framework/dom/component.cpp:645
#17 0x59bb141d in dom_create_component(JSContext*, unsigned long long, unsigned long long, unsigned long long) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x365c41d)
#18 0x59b4c0d3 in AIOTJS::__createComponent(JSContext*, unsigned long long, int, unsigned long long*) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x35f70d3)
#19 0x5a56ec17 in js_call_c_function quickjs/quickjs.c:16108
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Summary:
- I noticed that ps shows incorrect stack usage when running
getprime in the background.
- With CONFIG_ARCH_ADDRENV=y, a user task including pthread
allocates its stack in the user space that needs to be
accessed with a correct address environment.
- This commit fixes this issue.
Impact:
- CONFIG_ARCH_ADDRENV=y only
Testing:
- Tested with rv-virt:knsh64 on qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Current RISC-V/NuttX implementation assumes that text/data/heap
areas are continuous. In fact, CONFIG_ARCH_TEXT_VBASE and
CONFIG_ARCH_HEAP_VBASE are not used for memory allocation.
- This commit assigns dedicated virtual addresses for text and heap
which are the same approach to ARM-v7A/NuttX implementation.
Impact:
- None
Testing:
- Tested with rv-virt:knsh64 (will be updated later)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
mpfs_write_tx_fifo() gets stuck in the following case:
- CDCACM is used
- ttyACM0 is opened and then closed from the remote end,
such as Linux or Windows
- data is written into ttyACM0 from NuttX
- tx fifo will never get empty and the system is stuck
Fix this by issuing an error code if the transmit fifo doesn't
proceed as expected. The error code is then propagated into
higher level keeping the system functional.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
