sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
29,631 Commits 1 Branch 0 Tags 291 MiB
0f7210b0ae
Commit Graph

13254 Commits

Author SHA1 Message Date
Gregory Nutt
3091050963 STM32L4: Review of last PR + Move separate stm32l4_flash.h; move hardware-specific definitions to chip/stm32l4_flash.h 2017-05-11 06:58:39 -06:00
Juha Niskanen
c74a51f789 STM32L4: add internal flash write support 2017-05-11 14:35:27 +03:00
Juha Niskanen
4f18b40429 mtd/config: erase block between block read and write 2017-05-10 08:25:39 -06:00
Juha Niskanen
e04ea9e3e3 Merged in juniskane/nuttx_stm32l4/stm32l4_dbgmcu_pr (pull request #361) 
STM32L4: add dbgmcu header files

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-09 17:06:32 +00:00
Gregory Nutt
3d73a04259 Merged l432kc into master 2017-05-09 11:03:42 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Juha Niskanen
ce1ad33289 STM32L4: add dbgmcu header files 2017-05-09 14:13:51 +03:00
Sebastien Lorquet
d591d3ac4e Restore settings for UARTs 4 and 5 2017-05-09 11:38:14 +02:00
Sebastien Lorquet
5204f19e4f fix typo found by Juha during review 2017-05-09 11:32:16 +02:00
Sebastien Lorquet
c1cf1269c7 Adapt stm32l43x pin definitions 2017-05-09 10:58:04 +02:00
David Sidrane
014b69e120 removed stray paren. 2017-05-08 22:56:05 +00:00
David Sidrane
8406b40baa Merged in david_s5/nuttx-16/david_s5/stm32serial-dma-buffer-round-off-not-up-1494258804216 (pull request #357) 
stm32:Serial DMA buffer round off not up

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-08 20:32:44 +00:00
Gregory Nutt
aa11d637a8 STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point. 2017-05-08 12:33:15 -06:00
David Sidrane
546e7acb99 stm32:Serial DMA buffer round off not up 2017-05-08 15:54:03 +00:00
David Sidrane
b8ef079951 stm32:stm32_serial Forgot the -1 on mask 2017-05-08 03:43:36 +00:00
David Sidrane
0b2fb5a396 Merged in david_s5/nuttx/upstream_stm_dma (pull request #355) 
stm32: serial Allow configuring Rx DMA buffer size

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-06 17:49:48 +00:00
David Sidrane
b62ef579c8 stm32: serial Allow configuring Rx DMA buffer size 2017-05-06 05:16:21 -10:00
David Sidrane
5d6da5f4bb kinetis:Add ARCH_HAVE_I2CRESET 2017-05-06 04:52:48 -10:00
David Sidrane
97260321f2 kinetis:k66 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:32 -10:00
David Sidrane
ce98cedb17 kinetis:k64 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:24 -10:00
David Sidrane
af1f48c1c5 kinetis:k60 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:14 -10:00
David Sidrane
1d9d13c426 kinetis:k40 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:09 -10:00
David Sidrane
979e671cf0 kinetis:k20 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:00 -10:00
Gregory Nutt
1cd3b3f590 Fix errors introduced into Kinetis serial when I unsuccessfully tried to correct coding standard violations. Folks, things will be better for everyone if you just follow that standard. 2017-05-05 14:47:11 -06:00
Gregory Nutt
0e49db7626 Add a blank line. 2017-05-05 09:35:47 -06:00
Juha Niskanen
35883ff9ae Merged in juniskane/nuttx_stm32l4/l4dev (pull request #347) 
STM32L4: add support for many new MCUs from STM32L4X3XX product line and Nucleo-L452 board

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-05 15:31:07 +00:00
David Sidrane
f29981e473 kinetis:Added HW flow control and termios 2017-05-05 07:33:15 -06:00
David Sidrane
b6a8db1b39 Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock configuration 2017-05-05 07:18:39 -06:00
David Sidrane
29ef635e89 Kinetis:Add OSC_DIV to the kinetis_osc header 2017-05-05 07:16:11 -06:00
David Sidrane
f73e2aab8d Kinetis:Fixed CLKSRC Bit Names 2017-05-05 07:14:00 -06:00
David Sidrane
2171523f50 Kinetis:Add TPM to K66 chip 2017-05-05 07:12:52 -06:00
Juha Niskanen
71accfc57b STM32L4: add more chips to Kconfig 
(This also removes DPFPU/DTCM/ITCM features again, fixing a
recent git history hickup.)
 2017-05-05 11:03:49 +03:00
Juha Niskanen
a5e9724224 STM32L4: firewall for stm32l4x3xx 
Not tested for any product family, but now it at least compiles.
L496 devices can have one bit wider Volatile Data Segment.
 2017-05-05 10:15:09 +03:00
Juha Niskanen
075a8b913c STM32L4: separate SYSCFG into product line specific files for clarity 2017-05-05 10:10:37 +03:00
Juha Niskanen
92f4277b1e Merged in juniskane/nuttx_stm32l4/stm32l4_i2c_pr (pull request #346) 
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-04 19:29:08 +00:00
Jussi Kivilinna
7035723aeb STM32F7 serial: Allow configuring Rx DMA buffer size 2017-05-04 07:09:19 -06:00
Jussi Kivilinna
acf0d17e5a Fix STM32F7 I2C interrupt handler 2017-05-04 06:51:44 -06:00
Juha Niskanen
80c2d384bb STM32L4: flash: update override config macros and add FLASH_CONFIG_B 2017-05-04 15:24:16 +03:00
Juha Niskanen
ae22eb224a STM32L4: changes needed for STM32L452 and Nucleo-L452RE board 
GPIO and UART seem similar across STMicro product matrix,
so renamed files accordingly. RCC is cloned just in case,
while conflicting differences there seem to be very minor.
 2017-05-04 15:23:38 +03:00
Juha Niskanen
dd1b9dfa81 STM32L4: modularize Kconfig to support different product lines/families 
This is modeled after STM32F7. Idea is to declare each chip in Kconfig
but allow for flash size override. Commit adds many STM32L4_HAVE_XXX
feature test macros.
 2017-05-04 15:22:51 +03:00
Juha Niskanen
c67c4a75ba STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED 2017-05-04 09:31:12 +03:00
Gregory Nutt
b0e880b04c Revert "STM32 I2C: More backward tests of CONFIG_I2C_POLLED. Needs to be reviewed." 
This reverts commit 1e054a2d3b.
 2017-05-03 18:26:24 -06:00
Gregory Nutt
11c14470c3 Merge remote-tracking branch 'origin/master' into photon 2017-05-03 17:36:52 -06:00
Gregory Nutt
1e054a2d3b STM32 I2C: More backward tests of CONFIG_I2C_POLLED. Needs to be reviewed. 2017-05-03 17:33:35 -06:00
David Sidrane
9b5ac56409 Fixed typo and backward ifdef 2017-05-03 23:10:48 +00:00
Juha Niskanen
ad3b941c44 STM32L4: stm32l4x6xx_pinmap: update I2C4 and DCMI pins 
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
 2017-05-02 10:16:34 -06:00
Juha Niskanen
74e016d013 STM32F7: flash: macro naming errors, there is no FLASH_CONFIG_F for F7 
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
 2017-05-02 10:14:46 -06:00
Gregory Nutt
e94865a317 Merge remote-tracking branch 'origin/master' into photon 2017-05-02 08:49:19 -06:00
Gregory Nutt
40b5c46024 STM32L4: Delete more references to DFPU, ITCM, and DTCM. 2017-05-02 08:03:21 -06:00
Mateusz Szafoni
1feaae7222 Merged in raiden00/nuttx (pull request #338) 
OPAMP support for STM32F33XX
 2017-05-02 13:57:56 +00:00