Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
and removed two tcp_send_txnotify() calls from tcp_sendfile (they are not needed anymore).
As a result, the TX throughput of both the tcp_send_buffered and tcp_send_unbuffered
is significantly boosted in case of TUN/TAP network device.
For Linux, we rename the section so that they are not invoked.
However, it doesn't work for macOS.
Notes:
* Renaming the sections (as the Linux version does) doesn't work
because the section is looked by its flags, not by its names.
* No convenient tools available to alter the relevant bit in
the section flags.
* The constructors are invoked before the program entry point.
In case of high TX network traffic, netdriver_loop() that reads data from netdev
was invoked via up_idle() only after high TX network traffic had stopped.
That resulted in massive delay and drop of TCP ACK packets and
any other packets from netdev (tun/tap device).
For example, task is blocked by nxsem_wait(sem1), use nxsem_wait(sem2)
in signal handler, and take sem2 successfully, after exit from signal
handler to task, nxsem_wait(sem1) returns OK, but the correct result
should be -EINTR.
Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
we have many different hostfs implementation now, so it's better
to select the implementation explicitly, just like what we have
done for arm(FS_HOSTFS vs. ARM_SEMIHOSTING_HOSTFS).
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
When use poweroff command,host_abort will be called,but may be make __stack_chk_fail irq, and host_abort be called in PANIC(), so bring infinite loop, in turn it can not exit SIM.
Signed-off-by: buyuer <dingddding@163.com>
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found that sim_cpu_start() calls pthread_attr_init()
which locates not on the host OS but on the NuttX
- This commit fixes this issue by adding the symbol names
to nuttx-names.in
Impact:
- sim in SMP mode
- NOTE: stack usage for CPU1/2/3 IDLE is still incorrect on macOS
Testing:
- Tested with ostest on Ubuntu 18.04 (x86_64) and macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since this macro isn't check from host side after:
commit cee43ce280
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Jul 16 02:23:59 2021 +0800
arch/sim: Initialize the idle thread stack info correctly
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found the issue depends on pthread stack settings
and perhaps it might affect the host signal handling.
- This commit fixes this issue by just reverting the pthread
stack setting only for macOS.
Impact:
- sim:smp on macOS
- Stack usage for CPU1/2/3 IDLE will be incorrect
Testing:
- Tested with ostest on macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
use the same condition check in declaration and reference
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7b05316e914708fceeddac394d784ee3720a3c1b
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia54efbbca4b69706150bc4178844b316688a104e
1.Move all special process to mm_takesemaphore
2.Remove the support of recurive lock
3.Remove mm_trysemaphore function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie216a6294ab67c5d427f31b089beb15c532f08fe
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
and remove mm_sbrk and kmm_sbrk since it's wrong to expose
sbrk to other heaps except the default userspace heap.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Root casue:
when do thread exit, need add free stack operation to mm_delaylist,
but in SMP mode, CPU0 thread1 exit, at this time, CPU1 call malloc
and free mm_delaylist.
Fix:
Divide mm_delaylist for per CPU in SMP mode.
Change-Id: Ibf7d04614ea2f99fb5b506356b7346a0d94f0590
Signed-off-by: ligd <liguiding1@xiaomi.com>
since kernel component should use UTC instead local time
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf939e1ab0af8e577105f539d2553bc67b3b3d10
instead calling kmm_heapmember or umm_heapmember because:
1.The stack supplied by caller may allocate from heap too
2.It's hard to implement these two function in ASan case
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I196377822b7c4643ab4f29b7c1dc41dcd7c4dab1
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
specified the name of remote proc(rpmsg server)
Change-Id: I0086bb43727a2bbb5e68f88907b5e4608182ef9c
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
N/A
specified the name of remote proc(rpmsg server)
Change-Id: Ie270d651071e87a40a80ab489597ae18db9814f0
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
Reapply the following commit [1], which has been reverted by
the recent change [2] with no obvious reasons.
Also, add a comment block to explain the calculation.
[1]
```
commit 298c2e5e4f
Author: YAMAMOTO Takashi <yamamoto@midokura.com>
Date: Wed Jan 29 03:26:43 2020 +0900
sim: Fix stack alignment
The recent x86-64 convention requires 16-byte alignment before
(not after) calling a function.
This fixes snprintf crash I observed on macOS while saving XMM registers.
```
[2]
```
commit 2335b69120
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Mon Apr 12 23:44:08 2021 +0800
arch: Allocate the space from the beginning in up_stack_frame
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
```
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This fixes the problem that an assertion in sim build aborted NuttX
even when the assertion was generated from userspace (in which case
simpy the task needs to exit). This required moving the relevant code
into the sim blob.
Summary:
- In the previous implementation, signal handling for SMP was done
in a critical section that is not correct
- This commit fixes this issue
Impact:
- signal handling for SMP
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
add support to attach the devices via HCI TTY to Bluetooth Host
Reference:
drivers/wireless/bluetooth/bt_uart_shim.c
Signed-off-by: chao.an <anchao@xiaomi.com>
Reuse the reserved fields of hci buffer to avoid redundant packet type splitting
Change-Id: I79d70ae939111bb909a6e0981c50e401734590f2
Signed-off-by: chao.an <anchao@xiaomi.com>
nuttx.rel: In function `rpmsg_serialinit':
nuttx/arch/sim/src/sim/up_rptun.c:257: undefined reference to `uart_rpmsg_init'
collect2: error: ld returned 1 exit status
Makefile:310: recipe for target 'nuttx' failed
Change-Id: I93a20941bc07f749165dc8f012da46ddb7b02b00
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary
- This commit fixes interrupt handling for SMP
- The following are the changes
- Introduce up_copyfullstate.c
- Add enter_critical_section() to up_exit()
- Add a critical section to up_schedule_sigaction()
- Introduce pseudo timer thread to send periodic events
- UART and interval timer are now handled in the pause handler
- Apply the same SMP related code as other CPU architectures
- However, signal handling and context switching are not changed
- Also enable debug features and some tools in smp/defconfig
Imact
- SMP only
Testing
- Tested with sim:smp on ubuntu18.04 x86_64
- Tested with hello, taskset, smp, ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
64-bit size_t/intptr_t/ptrdiff_t are long, not long long,
for macOS and Linux.
Note: we don't care CONFIG_SIM_M32 on macOS.
macOS:
spacetanuki% uname -a
Darwin spacetanuki.lan 18.7.0 Darwin Kernel Version 18.7.0: Mon Aug 31 20:53:32 PDT 2020; root:xnu-4903.278.44~1/RELEASE_X86_64 x86_64
spacetanuki% cc --version
Apple clang version 11.0.0 (clang-1100.0.33.17)
Target: x86_64-apple-darwin18.7.0
Thread model: posix
InstalledDir: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin
spacetanuki% cc -dM -E - < /dev/null|grep __SIZE_TYPE__
#define __SIZE_TYPE__ long unsigned int
spacetanuki% cc -m32 -dM -E - < /dev/null|grep __SIZE_TYPE__
#define __SIZE_TYPE__ long unsigned int
spacetanuki%
Linux:
root@4c2e9e83ac82:/tools# uname -a
Linux 4c2e9e83ac82 5.4.39-linuxkit #1 SMP Fri May 8 23:03:06 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
root@4c2e9e83ac82:/tools# cc --version
cc (Ubuntu 9.3.0-10ubuntu2) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
root@4c2e9e83ac82:/tools# cc -dM -E - < /dev/null|grep __SIZE_TYPE__
#define __SIZE_TYPE__ long unsigned int
root@4c2e9e83ac82:/tools# cc -m32 -dM -E - < /dev/null|grep __SIZE_TYPE__
#define __SIZE_TYPE__ unsigned int
root@4c2e9e83ac82:/tools#
(gdb) b longjmp
Breakpoint 1 at 0x8270
(gdb) r
Starting program: /home/chao/code/m3/nuttx/nuttx
[ 0.000000] Assertion failed at file:task/task_onexit.c line: 99
Breakpoint 1, 0xf7b905e0 in siglongjmp () from /lib/i386-linux-gnu/libc.so.6
(gdb)
(gdb) bt
|#0 0xf7b905e0 in siglongjmp () from /lib/i386-linux-gnu/libc.so.6
|#1 0xf7f9c3dc in siglongjmp_alias () from /lib/i386-linux-gnu/libpthread.so.0
|#2 0x5655d668 in up_assert (filename=0x56641018 "task/task_onexit.c", line=99) at sim/up_head.c:132
|#3 0x56567413 in _assert (filename=0x56641018 "task/task_onexit.c", linenum=99) at assert/lib_assert.c:36
|#4 0x565f8cfd in on_exit (func=0x565f8c12 <exitfunc>, arg=0x565fd780 <simuart_restoremode>) at task/task_onexit.c:99
|#5 0x565f8c89 in atexit (func=0x565fd780 <simuart_restoremode>) at task/task_atexit.c:109
|#6 0x565fd819 in simuart_start () at sim/up_simuart.c:112
|#7 0x5656c844 in up_uartinit () at sim/up_uart.c:496
|#8 0x5656ba7a in up_initialize () at sim/up_initialize.c:234
|#9 0x5655da56 in nx_start () at init/nx_start.c:701
|#10 0x5655d5e9 in main (argc=1, argv=0xffffd6f4, envp=0xffffd6fc) at sim/up_head.c:96
Change-Id: Ifd7196b2de7bf9fc7cea764c19a5c0eacf08fdb6
Signed-off-by: chao.an <anchao@xiaomi.com>
This adds the inital wiring for i2c bus support in the sim target
and for Linux host adds the lower half that uses the i2c chardev.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Squashed commit of the following:
sim audio: call alsa to playback/capture data
sim/audio: correct the format capability
sim/audio: add pause/resume support
sim/audio: add auto stop when meet AUDIO_APB_FINAL
sim/audio: fix abort when set small buffer_size
sim/audio: move sim_audio.c to sim_alsa.c
Change-Id: I8e00ece79159e844ca17fd4c363480b985ee0490
Signed-off-by: ligd <liguiding1@xiaomi.com>
### Summary of Changes ###
Running the NuttX simulation 'as fast as possible' breaks the features
that depend on timing: eg. the Bluetooth stack. Enabling this option by
default SIM_WALLTIME=y will introduce delays and will tick the simulation at
a real pace.
Refresh defconfigs for sim targets and add depends on SIM_WALLTIME for
SIM_HCISOCKET.
Signed-off-by: Sebastian Ene <sene@apache.org>
There is a good case on sim platform:
When we input some cmd and click enter key to start application in terminal,
this context will change to application from IDLE loop. Althrough entey key '\r'
has been received to recv buffer and complete post semaphore of reader, but
pollnotify may not be called because context change. So when application run
poll function, because no events happend and poll enter wait, context will
again change to IDLE loop, this pollnotify of IDLE loop will run to send poll
events, poll function of applicaton will wake up. It's wrong!
Change-Id: I812a889f2e90781a9c3cb4b0251cccc4d32bebd1
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
This commit corrects the following compilation error:
/usr/include/cygwin/socket.h:27:8: error: redefinition of 'struct sockaddr'
27 | struct sockaddr {
| ^~~~~~~~
In file included from /usr/include/w32api/winsock2.h:57,
from sim/up_wpcap.c:48:
/usr/include/w32api/psdk_inc/_ip_types.h:70:8: note: originally defined here
70 | struct sockaddr {
| ^~~~~~~~
In file included from /usr/include/sys/socket.h:13,
from /usr/include/cygwin/in.h:21,
from /usr/include/netinet/in.h:12,
from sim/up_wpcap.c:57:
/usr/include/cygwin/socket.h:39:8: error: redefinition of 'struct sockaddr_storage'
39 | struct sockaddr_storage {
| ^~~~~~~~~~~~~~~~
In file included from sim/up_wpcap.c:48:
/usr/include/w32api/winsock2.h:269:10: note: originally defined here
269 | struct sockaddr_storage {
| ^~~~~~~~~~~~~
The compilation was broken by a couple of recent blind, unverified changes to up_wpcap.c. Most were introduced with commit: 8ce0ff5ce4 with this change:
diff --git a/arch/sim/src/sim/up_wpcap.c b/arch/sim/src/sim/up_wpcap.c
index ef7b4b3a0c..a15421e80c 100644
--- a/arch/sim/src/sim/up_wpcap.c
+++ b/arch/sim/src/sim/up_wpcap.c
@@ -55,6 +55,8 @@
#include <netinet/in.h>
+#include "up_internal.h"
+
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
up_internal.h includes:
47 # include <sys/types.h>
48 # include <stdbool.h>
49 # include <netinet/in.h>
And netinet/in.h includes:
46 #include <sys/types.h>
47 #include <sys/socket.h>
48 #include <stdint.h>
Which is where the collision error is introduced since up_wpcap.c includes winsock2.h already. There were additional problems introduced to the file by other changes:
- A malformed syslog() call was added
- Some issues with netdriver_setmacaddr()
## Summary of Changes
Add a host timer that generates periodic signals and sends SIGALRM to
the process that runs the NuttX simulation. This logic is integrated as
part of the existing NuttX oneshot timer. The host timer installs an
irq handler which is expected to run every CONFIG_USEC_PER_TICK .
Signed-off-by: Sebastian Ene <nuttx@fitbit.com>
1. There is difference about symbol replace on nuttx-names.in
between MacOS & Linux
2. For MacOS, if open '-fvisibility=hidden' and adjust nuttx-names.in,
it will meet symbol link-back-to-nuttx error.
3. Make the MacOS replace behaviour, same with Linux
Note:
MacOS should install objcopy with command:
$ brew install binutils
$ export PATH=$PATH:/usr/local/opt/binutils/bin
already check in to cibuild.sh
Change-Id: If78b784cc0ecb98cdbf7091de38acef00a8a02f3
Signed-off-by: ligd <liguiding1@xiaomi.com>
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
EXTRAFLAGS is already applied to *FLAGS in board's Make.defs (and
it applies to whole build, not just arch-code). EXTRAFLAGS is passed
around each make call to the complete build.
KDEFINE is already added to EXTRAFLAGS in main Makefile so no need
to add it again in arch-level Makefile
After previous commit, add -fvisibility=hidden, we don't need
worry about depended libxx.so callback to nuttx symbol in SIM.
So most of the symbol in nuttx-names.in can be remove.
But we still need some symbol replacement for host code.
Host code should call host API if access HOST sth, for example:
open, close, accept, printf...
Signed-off-by: ligd <liguiding1@xiaomi.com>
should use syslog in kernel
RP check failed because host code call host API has
style AaaBbb, so, ignore the RP check
Change-Id: Iad3468dae2cd07e6dd92874c5e6d38d9018bee6c
Signed-off-by: ligd <liguiding1@xiaomi.com>
## Summary of changes
The pthread_cond_* API is also present as part of libfs.a and we want
to avoid colisions and link with the correct implementation.
Signed-off-by: Sebastian Ene <nuttx@fitbit.com>
## Summary of changes
On OSX with CONFIG_SMP=y the semaphore which notifies that the CPU is
initialised, is not created and the up_cpu_start() returns with error
from sem_init(). This patch fixes the problem by using pthread_cond_t
signalling mechanism which is supported on Mac.
Signed-off-by: Sebastian Ene <nuttx@fitbit.com>
Note: dlsymtab is not in standards. but just in case.
(gdb) bt
#0 getpid () at task/task_getpid.c:91
#1 0x00000000004fbc9d in modlib_registry_lock ()
at modlib/modlib_registry.c:89
#2 0x0000000000719ee0 in modsym (handle=0xffffffffffffffff,
name=0x7fa7ebdde8c7 "mmap") at module/mod_modsym.c:92
#3 0x000000000071597d in dlsym (handle=0xffffffffffffffff,
name=0x7fa7ebdde8c7 "mmap") at dlfcn/lib_dlsym.c:164
#4 0x00007fa7ebdbeb39 in ?? () from /lib/x86_64-linux-gnu/libasan.so.5
#5 0x00007fa7ebd79b28 in ?? () from /lib/x86_64-linux-gnu/libasan.so.5
#6 0x00007fa7ebd9d7a7 in ?? () from /lib/x86_64-linux-gnu/libasan.so.5
#7 0x00007fa7ec6ce03a in ?? () from /lib64/ld-linux-x86-64.so.2
#8 0x00007fa7ec6ce141 in ?? () from /lib64/ld-linux-x86-64.so.2
#9 0x00007fa7ec6be13a in ?? () from /lib64/ld-linux-x86-64.so.2
#10 0x0000000000000001 in ?? ()
#11 0x00007fff028f686b in ?? ()
#12 0x0000000000000000 in ?? ()
(gdb) quit
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
so size with nuttx could report the correct bss value:
text data bss dec hex filename
155467 1464 1948 158879 26c9f nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7e9ec4d09d14b6f15b235b4b46ebdd98986d9750
1.Expose the notification through fb_vtable_s::updatearea
2.Incorporate old nx_notify_rectangle into the new updatearea callback
3.Migrate the calle of nx_notify_rectangle to fb_vtable_s::updatearea
Change-Id: Ia3d1f73e8757b2d381586d76ec6adc16c810018d
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
clang-check complained like the following.
While this is not a real bug, it's easy to appease.
sim/up_exit.c:68:21: warning: Value stored to 'tcb' during its initialization is never read
FAR struct tcb_s *tcb = this_task();
^~~ ~~~~~~~~~~~
1 warning generated.
include/arch/irq.h💯20: note: previous declaration with ‘C++’ linkage
100 | static inline void up_irqinitialize(void)
| ^~~~~~~~~~~~~~~~
In file included from include/ctype.h:45,
from include/libcxx/ctype.h:38,
from include/libcxx/cctype:38,
from include/libcxx/cwctype:53,
from include/libcxx/cwchar:106,
from include/libcxx/string:510,
from libcxx/src/debug.cpp:13:
include/nuttx/arch.h:1343:6: error: conflicting declaration of ‘void up_irqinitialize()’ with ‘C’ linkage
1343 | void up_irqinitialize(void);
| ^~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I0e0963a3465f9dabdaca6534a55b9c2c41f4bc64
Make.dep file should be updated by .config changed after first make.
There are 2 cases affected for this problem:
1) Add source files by config symbol
2) Include header files in #ifdef directive
These 2 cases may not be included in Make.dep and this may prevent the
differential build from working correctly.
since exit will be only callable from userspace and change
the 1st argument from "const uint8_t *" to "const char *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I86487d57210ab63109148232da71dbc4d60a563b
make can't guarantee the build order of prerequest with -jn where n > 1
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I772fcc0775d15b385f28fc0abeeff383b3a52622
fix the following linker error:
nuttx.rel:(.eh_frame+0x93): undefined reference to `__gxx_personality_v0'
Change-Id: I94f43a15275194d42199c91f276e8848ad5189f6
Signed-off-by: chao.an <anchao@xiaomi.com>
LD: nuttx.rel
objcopy: couldn't open symbol redefinition file nuttx-names.dat
(error: No such file or directory)
Makefile: 297: recipe for target 'nuttx.rel' failed
Change-Id: Ic78f030b77c3468ddbb96d4fb0558edad3abc3ae
Signed-off-by: chao.an <anchao@xiaomi.com>
ASAN trace:
...
==32087==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xf4502120 at pc 0x56673ca3 bp 0xff9b6a08 sp 0xff9b69f8
WRITE of size 1 at 0xf4502120 thread T0
#0 0x56673ca2 in strcpy string/lib_strcpy.c:64
0xf4502120 is located 0 bytes to the right of 8224-byte region [0xf4500100,0xf4502120)
allocated by thread T0 here:
#0 0xf7a60f54 in malloc (/usr/lib32/libasan.so.4+0xe5f54)
#1 0x5667725d in up_create_stack sim/up_createstack.c:135
#2 0x56657ed8 in nxthread_create task/task_create.c:125
#3 0x566580bb in kthread_create task/task_create.c:297
#4 0x5665935f in work_start_highpri wqueue/kwork_hpthread.c:149
#5 0x56656f31 in nx_workqueues init/nx_bringup.c:181
#6 0x56656fc6 in nx_bringup init/nx_bringup.c:436
#7 0x56656e95 in nx_start init/nx_start.c:809
#8 0x566548d4 in main sim/up_head.c:95
#9 0xf763ae80 in __libc_start_main (/lib/i386-linux-gnu/libc.so.6+0x18e80)
CALLSTACK:
#8 0xf79de7a5 in __asan_report_store1 () from /usr/lib32/libasan.so.4
#9 0x565fd4d7 in strcpy (dest=0xf4a02121 "", src=0xf5c00895 "k") at string/lib_strcpy.c:64
#10 0x565e4eb2 in nxtask_setup_stackargs (tcb=0xf5c00810, argv=0x0) at task/task_setup.c:570
#11 0x565e50ff in nxtask_setup_arguments (tcb=0xf5c00810, name=0x5679e580 "hpwork", argv=0x0) at task/task_setup.c:714
#12 0x565e414e in nxthread_create (name=0x5679e580 "hpwork", ttype=2 '\002', priority=224, stack=0x0, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:143
#13 0x565e42e3 in kthread_create (name=0x5679e580 "hpwork", priority=224, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:297
#14 0x565e5557 in work_start_highpri () at wqueue/kwork_hpthread.c:149
#15 0x565e3e32 in nx_workqueues () at init/nx_bringup.c:181
#16 0x565e3ec7 in nx_bringup () at init/nx_bringup.c:436
#17 0x565e3d96 in nx_start () at init/nx_start.c:809
#18 0x565e3195 in main (argc=1, argv=0xffe6b954, envp=0xffe6b95c) at sim/up_head.c:95
Change-Id: I096f7952aae67d055daa737e967242eb217ef8ac
Signed-off-by: chao.an <anchao@xiaomi.com>
like other related macro(e.g. INTMAX_MIN, INTMAX_MAX...)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8863599960b1a9b1c22ae9c35735a379a4c745b0
utilize the call inside nxtask_exit instead, also move
nxsched_suspend_scheduler to nxtask_exit for symmetry
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I219fc15faf0026e452b0db3906aa40b40ac677f3
-Move task_init() and task_activate() prototypes from include/sched.h to include/nuttx/sched.h. These are internal OS functions and should not be exposed to the user.
-Remove references to task_init() and task_activate() from the User Manual.
-Rename task_init() to nxtask_init() since since it is an OS internal function
-Rename task_activate() to nxtask_activate since it is an OS internal function
remove the TLS alignment check
Regression by:
--------------------------------------------------------
commit a6da3c2cb6
Author: Ouss4 <abdelatif.guettouche@gmail.com>
Date: Thu May 7 18:50:07 2020 +0100
arch/*/*_checkstack.c: Get aligned address only when
CONFIG_TLS_ALIGNED is enabled.
--------------------------------------------------------
commit c2244a2382
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu May 7 09:46:47 2020 -0600
Remove CONFIG_TLS
A first step in implementing the user-space error is
force TLS to be enabled at all times. It is no longer optional
Signed-off-by: chao.an <anchao@xiaomi.com>
Move the logic to get TLS information from an inline function to a normal function. For the unaligned case, it is probably too large to be inlined.
Also fixes some minor things from review of previous commits.
Fix it after the following change:
commit bb4458b63f
Author: Ouss4 <abdelatif.guettouche@gmail.com>
Date: Thu Apr 30 19:05:12 2020 +0100
include/sys/stat.h: Per the POSIX standard, the atime, ctime and mtime field
s
have changed their type from time_t to struct timespec.
Mac OS X was renamed to macOS at some point. Update references to
OSX, OS X, Mac OS X, Mac OSX, and other permutations, to macOS,
in README files and in comments of other files.
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.
Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
On modern environments, bss is not executable.
Alternatively we can use the ARCH_HAVE_MODULE_TEXT mechanism.
But it's considered overkill for the sim, which is mainly
for development.
From:
https://github.com/moby/vpnkit
commit 2ffc1dd8a84ea7359dd09b1f4b51bb728d4f46a0
c/vpnkit-tap-vsockd/tap-vsockd.c
With minimum changes to make it build.
And remove syslog_init_e because all initialization is later now and we don't
distinguish the initialition phase anymore after ramlog don't need special
initialize.
Because we can get the same function by CONSOLE_SYSLOG/syslog_console_init.
BTW, it isn't a good choice to use g_ramlogfops as /dev/console since nsh
will read back what it send out which will surprise most people.
it doesn't make sense that iob initialization is in up_initialize
but other memory components initialization is called in nx_start
Change-Id: Id43aeaa995f340c5943f59a0067a483ff3ac34a2
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG. The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
The benefit include:
1. Simplify the implementation
2. Support both tick and tickless automatically
3. No time drift in tickless mode
4. Support critmon arch API automatically
