sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
45,536 Commits 1 Branch 0 Tags 291 MiB
22548d71eb
Commit Graph

503 Commits

Author SHA1 Message Date
Gregory Nutt
e8738e1f55 Minor update to some comments. 2017-08-04 09:00:58 -06:00
Gregory Nutt
bbc06dcd8e RAMTRON: Should be able to select chunked write mode via a configuration option, not by editing the file. 2017-08-04 08:49:07 -06:00
Boris Astardzhiev
79ee0a5209 RAMTRON: Add support for splitting block writes in chunks. Some Re-RAMs like MB85AS4MT has a write buffer size limitation. 2017-08-04 08:12:59 -06:00
Gregory Nutt
95e20afcd2 drivers/: Remove dangling space at the end of lines. 2017-06-28 13:17:17 -06:00
Jussi Kivilinna
4eaa136850 smart: fix wrong freeing of device structure and use-after-free issues on error paths 2017-06-28 07:20:07 -06:00
Jussi Kivilinna
7b8df1b930 mtd/w25: wait for BUSY flag to clear in w25_readid and w25_unprotect. W25Q128 datasheet says that all instructions expect 'Read Status Register' and 'Erase/Program Suspend' are ignored when BUSY flag in status register is '1'. Therefore wait for busy flag to clear in w25_readid() and w25_unprotect(). 2017-06-13 07:35:49 -06:00
Jussi Kivilinna
2596b14c90 mtd/w25: add missing locking and fix SPI_SELECT usage for w25_unprotect 2017-06-13 07:33:34 -06:00
Gregory Nutt
0a85a41678 MTD FLASH driver: Clone Sebastien Lorquet's m25px change to at25, is25xp, ramtron, and sst25xx. 2017-06-12 09:51:42 -06:00
Sebastien Lorquet
2851959dee MTD M2PX: If we READ while a write/erase is pending, the command is ignored and the write/erase continues. If we dont catch this situation we will return garbage to the user because the flash will not execute the command. So READ MUST wait for write completion, and before that, the bus must be locked since it's a precondition to calling waitwritecomplete(). 2017-06-12 09:34:09 -06:00
Gregory Nutt
d35a060a41 Revert "MTD: Fix problems in SPI locking in mp25x.c driver. Same problem probably in exists in several other drivers that derive from this this driver as well." 
This reverts commit 85645284b3.
 2017-06-12 07:23:06 -06:00
Sebastien Lorquet
85645284b3 MTD: Fix problems in SPI locking in mp25x.c driver. Same problem probably in exists in several other drivers that derive from this this driver as well. 2017-06-12 06:38:27 -06:00
Gregory Nutt
670d6a1e8d MTD FLASH drivers: The byte write method of several drivers had a cloned error: It was not locking the bus while performing byte write operations. 2017-06-06 16:10:41 -06:00
Juha Niskanen
06edfae133 mtd/config: Add some error checks for I/O errors 2017-06-01 06:22:27 -06:00
Jussi Kivilinna
7af5cbb833 drivers/mtd/w25.c: Enable short delay after sector/chip erase 2017-05-31 09:17:58 -06:00
Jussi Kivilinna
8b006e705e drivers/mtd/w25.c: erase sector only if it is not in erased state 2017-05-31 09:09:24 -06:00
Jussi Kivilinna
c7fcdf968d mtd/smart: Fix use of uninitialized variable 2017-05-31 09:07:25 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Juha Niskanen
0f7210b0ae mtd: fix some unallocated and NULL pointer issues. rwb->wrflush and rwb->wrmaxblocks in rwbuffer could get unallocated values from ftl_initialize() in some configurations. Also fixes related assert: 
up_assert: Assertion failed at file:rwbuffer.c line: 643

that can happen with the following configuration:

  CONFIG_FTL_WRITEBUFFER=y
  CONFIG_DRVR_WRITEBUFFER=y
  # CONFIG_FS_WRITABLE is not set

These problems are caused by CONFIG variable differences between the buffer layers. TODO: This is not a perfect solution. readahead support has similar issues.
 2017-05-11 07:22:21 -06:00
Juha Niskanen
58a0b09b82 mtd/config: fix byte read interface test 2017-05-11 07:19:24 -06:00
Juha Niskanen
797e3c3ca4 mtd: build RAMTRON and AT45DB drivers only if selected 2017-05-11 07:17:29 -06:00
Juha Niskanen
4f18b40429 mtd/config: erase block between block read and write 2017-05-10 08:25:39 -06:00
Gregory Nutt
e9a5477506 Add an instance argument to the SPIDEV definitions. 2017-04-29 12:26:52 -06:00
Heesub Shin
a10735b50d mtd/progmem: fix incorrect target address calculation 
progmem_read/write() is incorrectly calculating the target address,
expecting the offset argument is given in a block number. This is
completely wrong and as a result invalid flash region is accessed.
Byte-oriented read/write interfaces of mtd device accept the
target address in a byte offset, not a block number.

Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
 2017-03-19 01:11:37 +09:00
Gregory Nutt
a70ea9d3bc Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev. 2017-01-30 07:26:38 -06:00
Gregory Nutt
5e0c18b535 Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198) 
Adding missing CONFIG_ prefix
 2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b Adding missing CONFIG_ prefix 2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered. 2017-01-15 13:00:50 -06:00
Aleksandr Vyhovanec
bf528f2071 packed_struct replaced by begin_packed_struct and end_packed_struct 2017-01-09 14:17:49 +03:00
Gregory Nutt
1793c1f8e1 Trivial, cosmetic change 2016-11-29 15:03:51 -06:00
Gregory Nutt
8dd2494407 Review of last PR: Fix return value (ERROR is not a value return value in this context). Fix some spacing. 2016-11-01 15:13:09 -06:00
Aleksandr Vyhovanec
be1626ad7b Added EEPROM timeout 2016-11-02 00:03:16 +03:00
Aleksandr Vyhovanec
b0f973d901 MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F. 2016-09-02 11:00:04 -06:00
Aleksandr Vyhovanec
3f40541b21 MTD: Fixed cloned typos in several FLASH drivers. 2016-09-02 07:27:57 -06:00
Beat Küng
dd1f679891 mtd: Add Fujistu MB85RS256B ramtron support 
contributed by flatlevel from https://github.com/PX4/NuttX/pull/79
 2016-08-23 18:27:04 +00:00
Gregory Nutt
9965cbe428 drivers/: Review and correct some stylistic inconsistencies 2016-08-07 09:43:48 -06:00
Gregory Nutt
10fff9011a Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h 2016-07-21 13:34:54 -06:00
Gregory Nutt
46dbbe837e rwbuffer.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:54:38 -06:00
Ken Pettit
39174da3be Remove naming conflict in drivers/mtd/filemntd.c 2016-07-17 20:19:44 -06:00
Ken Pettit
fea2aaba05 SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256, adds DEBUGASSERT for invalid geometry and additional memory debug logic. Also fixes the dangling pointer on error bug. 2016-07-14 10:31:28 -06:00
Gregory Nutt
74037a7951 Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #97) 
fixes to n25qxxx mtd driver for smartfs support, etc...
 2016-07-12 12:16:13 -06:00
ziggurat29
74777499bc alter the notion of 'blocksize' to be equivalent to 'flash write page size' in order to align with assumptions in the smartfs driver (at least, maybe other things do as well). 
Correct a bug that was previously masked by having blocksize=eraseblocksize which would cause buffer overflows and delicious hardfaults.
Trivial spelling changes in comments, etc.
 2016-07-12 11:46:08 -05:00
Sebastien Lorquet
0d41a1cd42 Before accessing the sst26 flash, the "Global Unlock" command must me executed, which I do in the sst26 driver. 
BUT. re-reading the datasheet, the WREN instruction is required to enable the execution of this command. This was not done.

I have no idea how the driver currently works except by chance. The writes
should never happen at all, the flash is half-enabled!
 2016-07-12 10:34:03 -06:00
Gregory Nutt
5b6fafb3f5 Several MTD FLASH drivers nullify the freed 'priv' structure and failed to return NULL as stated in the comments. Result, will operate on a NULL pointer later. Noted by David Sidrane. 2016-06-30 17:49:53 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
efb02f2ef1 drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors. 2016-06-12 08:31:22 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
5f9bcfd5bf Trivial changes from review of last PR 2016-06-09 09:36:06 -06:00
Gregory Nutt
03c44c3583 Merged in marten_svanfeldt/nuttx-public/for_upstream/is25 (pull request #44) 
Added driver of IS25xP SPI flash devices
 2016-06-09 09:30:34 -06:00
Marten Svanfeldt
edeb2eed4e Added driver of IS25xP SPI flash devices 
Based on sst25xx driver

Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2016-06-09 05:13:06 +02:00
Gregory Nutt
a18dbfda6e Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call. 2016-06-02 10:44:13 -06:00
Sebastien Lorquet
880b59aa26 Additional configuration option to enable SST26 driver debug output. Using comming FS debug output generates too much output. 2016-05-25 13:43:44 -06:00
Sebastien Lorquet
f4fa4799f7 Add a driver for SST26F spi/qspi flash devices (SPI mode only) 2016-05-10 11:09:15 -06:00
ziggurat29
d3fbd86657 bug in smart.c; return code of smart_scan not checked, can cause success result in failure case, leading to 'dev' pointer being invalid. 2016-04-27 19:33:45 -05:00
Gregory Nutt
e8f0965d35 Mostly cosmetic changes from review of last PR 2016-04-17 14:13:44 -06:00
ziggurat29
1b9d837df3 add MTD support for Micron N25Qxxx family of QSPI flash 2016-04-17 12:20:07 -05:00
Gregory Nutt
84cd720479 FTL: Make it clear the the unlink method has not been implemented 2016-04-15 07:03:28 -06:00
Paul A. Patience
c62bb9beb1 Fix issues detected by cppcheck 2016-03-22 15:46:47 -04:00
Gregory Nutt
3ef25dc49d AT24xx: Add logic to unregister from the procfs file system if the driver is uninitialized 2016-03-17 09:55:10 -06:00
Max Neklyudov
1951b9df57 Improve m25px driver 2016-03-17 07:37:45 -06:00
Gregory Nutt
7fa0adff83 Fix a misplaced right bracket 2016-03-08 15:33:33 -06:00
Frank Benkert
4d9c41fd57 AT24XX: Correct address calculation in Multi-Block-Read 2016-03-08 15:31:23 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
009e9f76cb I2C: Fixes/improvements from last massive I2C commits 2016-02-02 07:13:03 -06:00
Gregory Nutt
69ce24c70c I2C: Remove the setfrequency method from the interface 2016-02-01 16:31:13 -06:00
Gregory Nutt
f9053182d3 I2C: Remove setaddress method 2016-02-01 12:14:31 -06:00
Gregory Nutt
8c9bddf998 I2C: Eliminate the I2C_WRITE and I2C_READ macros 2016-02-01 08:57:22 -06:00
Gregory Nutt
3a781a2d3f Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:36:47 -06:00
Gregory Nutt
ceb415204e Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 08:00:16 -06:00
Gregory Nutt
7edf921c5e Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8 All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features 2016-01-23 16:18:13 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
c16648b3fd Most cosmetic but also includes a fix for a compile problem from Ken Pettit 2015-12-01 12:54:57 -06:00
Gregory Nutt
3af1def49a Fix an error in a function prototype 2015-11-29 14:42:56 -06:00
Ken Pettit
5821af1bbe drivers/mtd: Add support for /dev/smart loop device. From Ken Petit 2015-11-28 09:00:26 -06:00
Gregory Nutt
6ff67d3061 Minor changes from code review 2015-11-25 14:57:25 -06:00
Ken Pettit
d4a58af380 drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry. 
drivers/mtd/filemtd.c:  New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device.  This is useful for testing on the simulation using the hostfs.

From Ken Petit
 2015-11-25 14:46:28 -06:00
Gregory Nutt
289b3e281f drivers/mtd/smart.c: Fix a compile error when CONFIG_MTD_SMART_MINIMIZE_RAM=y 2015-11-22 17:18:43 -06:00
Gregory Nutt
891589b307 drivers/mtd/smart.c: Add some run-time geometry tests 2015-11-22 17:10:42 -06:00
Gregory Nutt
54549ef082 Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'" 
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
 2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs' 
directory and build.
 2015-11-22 10:07:35 -06:00
Gregory Nutt
db2fe45666 Update some comments 2015-11-20 09:55:18 -06:00
Ken Pettit
d30b73be82 W25: Add support for byte write mode. From Ken Petit 2015-11-20 07:34:07 -06:00
Gregory Nutt
1c86c004c4 FLASH progmem memory MTD: Need to register with PROCFS if enabled 2015-11-19 06:57:02 -06:00
Ken Pettit
7b590ec9a2 drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit 2015-11-18 18:12:06 -06:00
Ken Pettit
f0f7dd9956 drivers/mtd/smart.c: Fix a Smart wear-leveling bug. From Ken Petit 2015-11-18 07:01:13 -06:00
Ken Pettit
7e58e4c4cf W25: Fix W25 page read/write logic 2015-11-18 06:56:53 -06:00
Gregory Nutt
e61d51dab3 If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource 2015-11-17 08:39:06 -06:00
Gregory Nutt
724901ceb9 Add support for multiple AT24xx EEPROM devices 2015-11-17 07:40:17 -06:00
Gregory Nutt
015429684f MTD progmem: Fix an address calculation 2015-11-13 11:32:34 -06:00
Gregory Nutt
2706b4f8aa mtd_progmem.c: Fix calculation of block size 2015-11-13 09:19:25 -06:00
Gregory Nutt
fdb17620a0 Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h 2015-11-12 16:03:24 -06:00
Gregory Nutt
ef59f83a38 drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h 2015-11-12 13:40:18 -06:00
Gregory Nutt
9f3edd6373 MTD Smart: Remove checks for 64KB erase block size. erasesize was changed to 32-bits in struct mtd_geometry_s 2015-11-11 08:25:03 -06:00
Gregory Nutt
2ff1b173f2 SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand 2015-11-11 08:15:08 -06:00
Gregory Nutt
08200d8f86 S24FL1: Fix so that the driver compiles with 512 byte block support 2015-11-10 13:34:33 -06:00
Gregory Nutt
eb1191df63 S24FL1: Fix an error in the page write logic 2015-11-10 12:48:29 -06:00
Gregory Nutt
965addb397 s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up 2015-11-10 11:33:35 -06:00
Gregory Nutt
2ab0832c26 Smart MTD: fix some outdated logic: geometray erase size is now 32-bits 2015-11-09 09:35:14 -06:00
Gregory Nutt
91429433f6 Correct naming of Spansion part. S25FL1, not ST25FL1 2015-11-07 11:51:09 -06:00
Gregory Nutt
b2bdba0824 S25FL1 FLASH driver: Fix return value from the bwrite() method 2015-11-07 11:26:53 -06:00
Gregory Nutt
bfeef77f1f SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard 2015-11-05 11:25:39 -06:00
Gregory Nutt
a314b2ac11 ST25FL1: Fix error that was overwriting status 2015-11-05 10:38:47 -06:00
Frank Benkert
e772c56ef6 AT24xx EEPROM Driver: Correct typo from last changeset 2015-10-31 09:04:53 -06:00
Gregory Nutt
46b688e701 Merged in marten_svanfeldt/nuttx-public/for_upstream/at24cxx (pull request #28) 
Improvements of AT24xx MTD driver
 2015-10-22 18:15:39 +08:00
Marten Svanfeldt
a31d1fd378 Make I2C frequency configurable for the AT24Cxx EEPROM driver 
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2015-10-21 12:01:36 +08:00
Marten Svanfeldt
af9590eef7 Extend the AT24Cxx MTD driver with support for -04,-08 and -16 parts. 
These parts utilize the same one-byte-address in the I2C protocol as the -02,
but requires different I2C addresses for different banks of the EEPROM.

Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2015-10-21 12:01:36 +08:00
Gregory Nutt
cf14f8d1b5 drivers/: Fixes to spacing and alignement 2015-10-10 10:41:00 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
7d33e858dd QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory 2015-09-06 09:37:34 -06:00
Gregory Nutt
f44320d2a6 ST25FL1: SAMV71 QSPI always does transfers in multiples of 4 bytes 2015-09-02 10:19:47 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Gregory Nutt
ebd97dcf89 ST25FL1: Make buffers all even multiple of 32-bit values 2015-08-31 10:18:50 -06:00
Gregory Nutt
2d84270552 ST25FL1: Correct some compile problems when file system debug is enabled 2015-08-31 09:25:14 -06:00
Gregory Nutt
ed750f3600 ST25FL1: Changes after review of ST24FL1 clocking 2015-08-29 18:54:20 -06:00
Gregory Nutt
d6b0a8fe72 ST25FL1 driver is code complete 2015-08-29 15:58:54 -06:00
Gregory Nutt
4a1951b192 ST25FL1: Flesh out FLASH write logic 2015-08-28 12:01:08 -06:00
Gregory Nutt
d2653ef7a8 ST25FL1: Update for changes to QSPI interface definitions 2015-08-28 10:15:39 -06:00
Gregory Nutt
361e35a7be QSPI: Make changes to interface to better work with the SAMV71 2015-08-27 14:16:51 -06:00
Gregory Nutt
7936819fcc ST25FL1: Flesh out more initialization logic 2015-08-26 14:16:45 -06:00
Gregory Nutt
1cf57ae2bd Cosmetic 2015-08-26 07:16:07 -06:00
Gregory Nutt
8fe0121e1a Convert fragmentation ST24FL1 driver to use QSPI interface 2015-08-25 17:20:54 -06:00
Gregory Nutt
94ecf7ebad drivers/mtd/st25fl1.c: Add a driver for ST25FL1*K QuadSPI FLASH parts 2015-08-25 09:10:12 -06:00
Gregory Nutt
3743d3d84a Add configuration options for forthcoming st25fl1 devices 2015-08-24 08:00:39 -06:00
David Sidrane
c83d92e846 RAMTRON: Update driver to include support for newer RAMTRON parts. 2015-08-10 11:30:37 -06:00
Gregory Nutt
be09a87c0e SST25: Eliminate some warnings 2015-07-03 14:38:33 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
d43a09275a AT24 EEPROM driver. Fix some an incorrect variable name used in conditional compilation. SourceForge patch #55 2015-05-15 06:15:58 -06:00
Gregory Nutt
e4d2822af8 Make some file section headers more consistent with standard 2015-04-08 07:15:32 -06:00
Gregory Nutt
495f420978 Extend the AT24 EEPROM driver so that it supports: (1) the byte-oriented read() method, (2) parts with extended memory regions, and (3) parts with 8-bit addressing. 2015-03-17 14:27:27 -06:00
Gregory Nutt
b5bfb6762d Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes 2015-03-05 08:08:11 -06:00
Gregory Nutt
e7470e0834 Update dates in all skeleton files 2015-02-13 06:13:34 -06:00
Gregory Nutt
f3427cb32a mtd/ramtron.c: Table of parts is not terminated properly if CONFIG_RAMTRON_FRAM_NON_JEDEC is not defined 2015-02-09 16:35:58 -06:00
Gregory Nutt
1c39b67e32 STM32: Fix some incorrectly placed conditional logic 2014-12-26 12:41:35 -06:00
Gregory Nutt
33bcb5dbca Back out some incorrect conditional compilation 2014-12-26 10:26:52 -06:00
Gregory Nutt
6daa9468f6 More RAMTRON related fixes from David Sidrane 2014-12-26 08:15:59 -06:00
Gregory Nutt
996d6c9d55 Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane 2014-12-26 07:59:09 -06:00
Gregory Nutt
a84bd3f433 M25P serial flash driver: Add subsector size of the M24P16 part. From Lazlo 2014-12-10 18:48:36 -06:00
Gregory Nutt
cdc8fc52d1 SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
Gregory Nutt
bc3212d70e EEPROM: Add a README file 2014-11-27 09:14:00 -06:00
Gregory Nutt
40b27115cc Add support for generic EEPROM access via a character driver. Add also the EEPROM driver itself. From Sebastien Lorquet 2014-11-26 13:55:34 -06:00
Gregory Nutt
2994448d85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
d9b238b002 Extend MTD support to M25P16. From Sébastien Lorquet 2014-11-07 10:35:03 -06:00
Gregory Nutt
b33f8b3013 MTD read-ahear/write buffering layer seems functional 2014-09-25 13:35:10 -06:00
Gregory Nutt
7c89724b99 A few fixes for clean apps/examples/mtdrwb build 2014-09-25 10:41:47 -06:00
Gregory Nutt
6626f62b08 In at45db_bwrite, the buffer is not increased when writing more than 1 page. Sourceforge bug #34 2014-09-25 06:48:04 -06:00
Gregory Nutt
34a057334c Update SMART FS procfs support. From Ken Pettit 2014-09-22 11:19:49 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
c9661ad5a7 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
3042fc5bc0 Missing closing quote in Kconfig file 2014-07-11 16:51:50 -06:00
Gregory Nutt
e91704c432 Minor Kconfig improvements 2014-07-11 16:25:35 -06:00
Gregory Nutt
ab1ab379dd Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL 2014-07-11 16:19:17 -06:00
Gregory Nutt
8516551e54 Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete) 2014-07-11 11:20:11 -06:00
Gregory Nutt
b36b29b4c3 SMARTFS: Increase some variables from uint16_t to uint32_t to handle larger device sizes. From Ken Pettit 2014-07-04 07:28:12 -06:00
Gregory Nutt
f881abe2da Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE was not selected and the SMART sector size was larger than the mtd device's block size (like it would be if using SMARTFS on larger flash devices). From Ken Pettit 2014-07-03 18:14:51 -06:00
Gregory Nutt
f1dcb6674a Extend erase block size to 18-bits in order (decrease block size to 14-bits) to handle parts with large erase blocks. From Kosma Moczek 2014-06-30 07:52:57 -06:00
Gregory Nutt
c48bd737d0 SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing) 2014-05-13 10:38:46 -06:00
Gregory Nutt
ddf151c226 A fix to the last MB85RS1MT patch 2014-05-12 21:42:06 -06:00
Gregory Nutt
e3373aaf39 Add support for Fujitsu MB85RS1MT part. From Charles Ash 2014-05-12 18:43:06 -06:00
Gregory Nutt
020583efa2 drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn. 2014-04-30 13:31:42 -06:00
Gregory Nutt
d119e4c977 Update TODO list and comments 2014-04-23 13:02:00 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
060b84240b Add macro UNUSED to eliminate warnings about variables that are set to unused values 2014-03-30 07:58:58 -06:00
Gregory Nutt
6179cdfb91 Eliminate a warning when debug is off 2014-03-26 17:04:13 -06:00
Gregory Nutt
30c34c07cf Add an MTD driver to wrap another MTD driver and makes is sector size look like 512 bytes 2014-03-24 17:45:45 -06:00
Gregory Nutt
42e06fb503 SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash 2014-03-13 14:07:35 -06:00
Gregory Nutt
91b002a043 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
9f46dac1e2 Add option to indicatet that data is retained in SDRAM 2014-01-28 10:42:49 -06:00
Gregory Nutt
49f73c04ae Fix a typo that was cloned to several SAMA5 and MTD files 2013-12-21 09:45:27 -06:00
Gregory Nutt
124bd68c6f Finish A10 Timer register definitions 2013-12-13 11:44:52 -06:00
Gregory Nutt
f97be5131c Various fixes to the recent, big procfs checkin 2013-12-12 11:08:20 -06:00
Gregory Nutt
e4471dc8e0 procfs/: Extenstive architectural changes and enhancements by Ken Pettit 2013-12-12 09:21:55 -06:00
Gregory Nutt
f821e74ebb Move smart.h to include/nuttx/fs/smart.h 2013-12-10 09:38:48 -06:00
Gregory Nutt
ed9756c137 MTD NAND: Check if block number is out of ragne at top of loop, not bottom, to avoid some bogus transfers 2013-12-05 18:19:48 -06:00
Gregory Nutt
422b225401 Cosmetic updates to comments and READMEs 2013-12-04 16:41:45 -06:00
Gregory Nutt
ae01f868b2 SAMA5 NAND: Fix some PMECC setup logic 2013-12-04 11:56:56 -06:00
Gregory Nutt
68ccbc0855 Add drivers/mtd/README.txt 2013-12-04 07:46:10 -06:00
Gregory Nutt
37c5113c94 MTD NAND: Fix an error in the calculation of the page number 2013-12-02 17:21:09 -06:00
Gregory Nutt
7847443f5a MTD NAND: Fix a misplaced endif 2013-12-01 21:06:07 -06:00
Gregory Nutt
c777f90b8a Costmet updates, naming, debug output, README file 2013-12-01 07:39:20 -06:00
Gregory Nutt
1ea447867a SAMA5 NAND: Still debugging 2013-11-28 12:21:33 -06:00
Gregory Nutt
a791b1070b Fix error in SMARTFS partition number reporting 2013-11-28 08:11:13 -06:00
Gregory Nutt
5a18f048ce Add MTD SST25 driver for larger SST25 parts. From Ken Pettit 2013-11-28 08:04:46 -06:00
Gregory Nutt
881c12cad8 Fixes a couple of errors in MTD NAND logic 2013-11-27 15:02:21 -06:00
Gregory Nutt
5fb0062d2d SAMA5 NAND: A few bug fixes for integration. Still lots more to do 2013-11-27 11:04:40 -06:00
Gregory Nutt
4483117a60 SAMA5 NAND: Trivial changes 2013-11-25 14:16:04 -06:00
Gregory Nutt
2be17cd41f SAMA5 NAND: Fix a few race conditions 2013-11-25 13:53:58 -06:00
Gregory Nutt
d1b4f1c466 SAMA5 PMECC: More progress, still not complete 2013-11-24 09:37:59 -06:00
Gregory Nutt
448c8572cd Rethinking some NAND interfaces 2013-11-19 08:50:12 -06:00
Gregory Nutt
d8a3f21a47 Finishes up NAND software ECC logic 2013-11-18 11:42:17 -06:00
Gregory Nutt
3faa880ef1 MTD NAND: Beginning of software ECC logic 2013-11-18 09:43:44 -06:00
Gregory Nutt
22d4eb9cca More NAND stuff 2013-11-17 14:35:57 -06:00
Gregory Nutt
d54832a942 More NAND stuff 2013-11-17 12:22:09 -06:00
Gregory Nutt
0e7a8668a5 Continuing NAND integration 2013-11-17 08:56:30 -06:00
Gregory Nutt
03b9f5a8e6 More NAND logic (still not complete) 2013-11-16 18:26:07 -06:00
Gregory Nutt
d421eb4fd6 Futher NAND development 2013-11-16 13:19:09 -06:00
Gregory Nutt
854e50b48e Further NAND support 2013-11-16 12:22:43 -06:00
Gregory Nutt
7ccbbe07cb Further NAND development 2013-11-16 11:46:35 -06:00
Gregory Nutt
c7657c9c5e EA3131: Framework for USB host support 2013-11-15 15:56:24 -06:00
Gregory Nutt
e53ba01b64 Add support for ONFI compatible NAND devices (NAND logic still incomplete) 2013-11-15 14:11:21 -06:00
Gregory Nutt
897572a552 Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h 2013-11-15 11:22:23 -06:00
Gregory Nutt
4dec2e4b27 Fix a badly applied patch (actually, non-applied because --dry-run was set) 2013-11-04 11:36:16 -06:00
Gregory Nutt
a4a18241d5 Updated configuration driver from Ken Pettit 2013-11-04 08:52:16 -06:00
Gregory Nutt
bfdee0f0c7 SST25 driver: Added one more use of sst25_cmd. From David Sidrane 2013-11-03 07:56:29 -06:00
Gregory Nutt
a2b6d12271 Fix to SST25 driver to permit faster write modes. From David Sidrane 2013-11-02 08:27:13 -06:00
Gregory Nutt
861b8bd511 MTD config: Reduce configuration header overhead. From Ken Pettit 2013-11-01 12:22:55 -06:00
Gregory Nutt
b01900d7e6 Add an MTD device wrapper that can used to provide a /dev/config that can be used for retaining configuration data. From Ken Pettit 2013-11-01 07:39:20 -06:00
Gregory Nutt
adeb33fdd2 Fix erase block vs page block confusion in MTD partition logic. From Ken Pettit 2013-10-31 10:40:10 -06:00
Gregory Nutt
6eba2e7897 drivers/mtd/sst.c: Fixes for 512 byte sector mode. From David Sidrane 2013-10-27 18:53:09 -06:00
Gregory Nutt
4e44868f12 CC3000 driver changes from David Sidrane 2013-10-16 11:59:26 -06:00
Gregory Nutt
4e3d02b216 Add support for the SST25VF016B serial FLASH. From Davide Sidrane 2013-10-16 08:28:58 -06:00
Gregory Nutt
b3018d8bf0 Add support for the AT 24C512 EEPROM 2013-09-12 09:44:38 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
628f50ba61 SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers 2013-08-09 13:12:16 -06:00
Gregory Nutt
cbe8c5ed56 SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH 2013-08-05 08:24:39 -06:00
Gregory Nutt
906506c61c SAMA5D3x-EK: At support for the AT25 serial FLASH 2013-08-04 16:56:41 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
345c592258 Fixed to M25P driver from Ken Pettit plus some documentation updates 2013-05-03 17:17:14 -06:00
Gregory Nutt
8757465df2 Replace CONFIG_MTD_SMART in MTD drivers with other conditions 2013-05-03 14:32:08 -06:00
Gregory Nutt
72179b7773 Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available). 2013-05-03 12:52:33 -06:00
Gregory Nutt
4f15d37b62 Add support for the byte write method to MTD partition logic; Beef up the MTD partition test -- and fix resulting bugs detected 2013-05-02 08:07:42 -06:00
Gregory Nutt
9ead6cadff Fix typo in configuration variables: MP25P should M25P 2013-05-01 12:04:39 -06:00
Gregory Nutt
1099eabe3d Cosmetic update to comments 2013-05-01 11:42:36 -06:00
Gregory Nutt
99c2cfc168 Add an optional byte-oriented write method to the MTD interface 2013-05-01 10:59:57 -06:00
Gregory Nutt
ba52f8d3ec Misc changes for clean built od mikroe-stm32f4 configurations 2013-05-01 09:21:13 -06:00
Gregory Nutt
25d5706ca3 SMART block driver plus changes to M25P and RAM drivers needed for SMART support 2013-04-30 19:10:54 -06:00
Gregory Nutt
5d4af79ea0 Incorporate comments from Ken Petit 2013-04-30 17:02:34 -06:00
Gregory Nutt
f9be47ead2 Add configuration and example to test MTD partitions 2013-04-30 15:54:02 -06:00
Gregory Nutt
4d4ece78af Add MTD partition support plus fix some typos in comments 2013-04-30 12:37:34 -06:00
Gregory Nutt
fc4c714523 Add support for the FM25V01 part 2013-04-18 16:12:37 -06:00
patacongo
d43f284715 Missed SST39VF driver in commit 45640 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5642 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-12 00:52:52 +00:00
patacongo
69fd9e1415 Add a driver for the SST30VF NOR FLASH parts 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5640 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-11 21:44:00 +00:00
patacongo
4587760eee Additional patches from Petteri Aimonen for FAT, STM32 SPI, and AT25 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5593 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-01 15:32:39 +00:00
patacongo
a5fbf66049 Don't build drivers/mtd unless CONFIG_MTD is defined (Denis Carikli) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5519 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-15 00:03:58 +00:00
patacongo
5306523bce Patches from Petteri Aimonen + stdbool and rand() changes for Freddie Chopin 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5415 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-07 16:00:56 +00:00
patacongo
318f3427f3 Several bugfixes, mostly from Darcy Gong 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5217 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-06 14:50:37 +00:00
patacongo
b4894c42dc Fix some W25 driver errors 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5212 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-04 18:42:28 +00:00
patacongo
7a2692df6a Resync new repository with old repo r5166 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-17 18:35:37 +00:00
patacongo
7a9457bb07 Email address change in nuttx/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:32:24 +00:00
patacongo
39f2ca6c1f Move RAMLOG driver to drivers/syslog; Add ability to output debug information to any character device or file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4996 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-02 00:42:46 +00:00
patacongo
cc5b31a286 Add support for the TI PGA11x amplifier/multiplexer 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4977 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-25 18:41:10 +00:00
patacongo
1c7794b97d Combine cfset[o|i]speed to cfsetspeed; combine cfget[o|i]speed for cfgetspeed 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4975 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-24 22:56:36 +00:00