* port didn't know about data-register fifo
* port didn't handle overrun condition
* driver could get stuck if interrupts were skipped due to saturation
Summary:
- Add Raspberry Pi Pico (RP2040) USB device controller support.
- Confirmed that CDC/ACM, MSC and these composite device are working.
- The current implementation have an unresolved issue and some workaround
for USB MSC SCSI driver is required.
See the comment in the patch "usbmsc: Add USBMSC_NOT_STALL_BULKEP for RP2040 workaround".
Impact:
- RP2040 only
Testing:
- Tested with Windows 10 and Ubuntu-18.04/20.04 as the USB host.
- Tested configurations:
- raspberrypi-pico:usbnsh
- raspberrypi-pico:usbmsc
- raspberrypi-pico:composite
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that DEBUGASSERTION() happens when executing
an ELF application
- This commit fixes this issue by re-mapping the address
to SYSBUS in up_module_text_free()
Impact:
- None
Testing:
- Tested with spresense (both DEBUG_ASSERTIONS=n and y)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that make savedefconfig shows warnings regarding
'unmet direct dependencies (ARCH_HAVE_MODULE_TEXT)'
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- In cxd56xx, ldrex/strex behavior is slightly different from
other Arm architectures. Dummy strex must be issued to release
the exclusive load & store unit.
Impact:
- SMP only
Testing:
- Tested with spresense:smp
- Tested with spresese:wifi_smp, spresense:rndis_smp
- NOTE: CONFIG_CXD56_TESTSET=y must be removed from defconfigs
Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit converts data to the physical address for DMA transfer.
Impact:
- cxd56_dmac.c, cxd56_sdhci.c, cxd56_usbdev.c
- cxd56_cisif.c, cxd56_emmc.c, cxd56_ge2d.c, cxd56_udmac.c
Testing:
- Tested with following configurations
- spresense:wifi, spresense:wifi_smp, spresense_rndis, spresense_rndis_smp
- NOTE: additional commits are needed for the test
- NOTE: cxd56_cisif.c, cxd56_emmc.c, cxd56_ge2d.c, cxd56_udmac.c are not tested
Signed-off-by: Kazuya Hioki <Kazuya.Hioki@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit introduces cxd56_modtext.c to allocate a separate
text memory for ELF
Impact:
- None
Testing:
- Tested with spresense:elf
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Sebastien Lorquet has submitted the CLA
Uros Platise has submitted the CLA
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
If the subcore configuration, which is mainly used in the Spresense
Arduino environment, is enabled, the serial console has been already
initialized by maincore. Then, don't need to re-initialize the UART1
serial driver.
ADC driver does not support multiple open and close. It causes the memory
corruption by multiple free. This commit fixes this problem by introducing
the reference counter.
If the system clock is changed during loading gnssfw, gnss open may be
failed. So this commit prohibits clock change until loading gnssfw is
completed.
There is an issue that the next alarm is expired immediately after
canceling a RTC alarm. Fixed alarm settings to be completely cleared
when canceling an RTC alarm.
If the system clock is changed during the SPI transfer, the SPI data can
be corrupted. So this commit prohibits the clock change during SPI transfer,
and keep the clock until the transfer is completed.
Introduce PM_CPUFREQLOCK_FLAG_HOLD into the frequency lock mechanism in
power manager, which is used to keep the current frequency without clock
change, for example, during the transfer of a periphral.
UART driver is stopped and re-started during a clock change. When a UART
interrupt is generated in each process, the unexpected behavior will
occur and a console will get stuck with UART driver. This commit fixed
each process is performed atomically.
Currently Nuttx doesn't seem to be any real support for OTG.
In the future when OTG is supported. This Knob can be removed
and drivers can enable their pin sets based on CONFIG_OTG.
(Adding CONFIG_OTG at this time would be misleading.)
stm32f7:SDMMC Use inttypes in printing macro
stm32f7:CAN Use inttypes in printing macro
stm32f7:DMA Use inttypes in printing macro
stm32f7:serial fix compile error from UNUSED() change
Summary:
- This commit adds stack coloration for the idle task
Impact:
- rp2040 with CONFIG_STACK_COLORATION=y
Testing:
- Tested with nsh, nshsram and smp configurations
- NOTE: CONFIG_STACK_COLORATION=y needs to be added
Summary:
- The NuttX for raspberrypi-pico boots via the boot_stage2 provided
by the pico-sdk which sets the MSP at the end of the SRAM.
- However, the NuttX expects the MSP is set to the top of the idle stack.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with nsh, nshsram and smp configrations
Summary:
- SP_SECTION was introduced to allocate spinlock in non-cachable
region mainly for Cortex-A to stabilize the NuttX SMP kernel
- However, all spinlocks are now allocated in cachable area and
works without any problems
- So SP_SECTION should be removed to simplify the kernel code
Impact:
- None
Testing:
- Build test only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
