sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
44,561 Commits 1 Branch 0 Tags 291 MiB
2af9b574f6
Commit Graph

44561 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Petro Karashchenko
2af9b574f6 boards/arm/samv7: define MTD progmem partitions at board level 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-03-19 11:42:10 +08:00
Petro Karashchenko
fe0fbdc088 config: finalize transition from USERMAIN_STACKSIZE to INIT_STACKSIZE 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-03-19 11:32:47 +08:00
Petro Karashchenko
20ac85860c config: finalize transition from USER_ENTRYPOINT to INIT_ENTRYPOINT 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-03-19 11:32:47 +08:00
Abdelatif Guettouche
aa84559566 xtensa_coproc.S: Replace spaces by tabs. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-03-19 01:09:22 +02:00
Abdelatif Guettouche
ce8fae2842 xtensa_coproc.S: Adjust the save reserved for local variables when 
restoring/saving coprocessor state.

These function don't use call8 or call12 and thus need to create just 16
bytes for the base save area, however they do use one variable so we
need a space for that.  The `entry` instruction works in unit of 8 bytes
so we add whole 8 bytes for one variable.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-03-19 01:09:22 +02:00
Gustavo Henrique Nihei
9ae826e925 xtensa/esp32s3: Fix output handling for pins numbered from 32 to 48 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2022-03-19 01:08:27 +02:00
Gustavo Henrique Nihei
f21a9f9578 xtensa/esp32s3: Enable UART pins to use IOMUX and bypass GPIO matrix 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2022-03-19 01:08:27 +02:00
Gustavo Henrique Nihei
77944ceb42 xtensa/esp32s3: Clean up and improve GPIO driver interface 
Also fix an inconsistenct regarding the ESP32S3_NGPIOS macro. Although
correctly defining the number of available GPIOs in ESP32-S3, it was
erroneously being used for verifying the pin range.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2022-03-19 01:08:27 +02:00
Gustavo Henrique Nihei
43b7d9b0da xtensa/esp32s3: Sync GPIO sigmap with IDF version 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2022-03-19 01:08:27 +02:00
Huang Qi
edef327655 arch/arm: Move ARCHCPUFLAGS to Toolchain.defs 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2022-03-19 02:24:00 +08:00
Petro Karashchenko
c1fb14ccaa boards/arm/samv7/same70-qmtech: add /dev/timer0 support 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-03-19 02:21:03 +08:00
Abdelatif Guettouche
2793e6f82d xtensa_releasepending.c: Remove commented out code. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-03-19 02:20:36 +08:00
chao.an
9de2818c18 fs/nfs: fix compile warning 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-03-19 02:20:20 +08:00
chao.an
38b3da6d00 sched/module: correct the check condition 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-03-18 20:13:25 +02:00
chao.an
484b930fd1 netdb/getaddrinfo: fix NULL pointer reference 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-03-18 20:11:54 +02:00
chao.an
6a212b1a2c mtd/partition: fix compile warning 
include/nuttx/mtd/mtd.h: In function ‘mtd_setpartitionname’:
mtd/mtd_partition.c:909:3: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
  909 |   strncpy(priv->name, name, sizeof(priv->name));
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2022-03-19 00:34:26 +08:00
chao.an
0f7ccf0c08 netdb/getaddrinfo: fix the compile warning 
netdb/lib_getaddrinfo.c: In function ‘alloc_ai’:
netdb/lib_getaddrinfo.c:80:9: warning: ‘strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
   80 |         strncpy(ai->sa.sun.sun_path, addr, sizeof(ai->sa.sun.sun_path));
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

netdb/lib_getaddrinfo.c: In function ‘alloc_ai’:
netdb/lib_getaddrinfo.c:103:9: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
  103 |         strncpy(ai->sa.srp.rp_cpu, addr, sizeof(ai->sa.srp.rp_cpu));
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-03-19 00:34:26 +08:00
Petro Karashchenko
6472a698b6 style/typo: fix few style and typo issues 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-03-18 17:05:10 +01:00
Janne Rosberg
841bcf84a0 docs/mpfs: mark USB and ethernet as supported 2022-03-18 17:22:27 +02:00
Janne Rosberg
49abe527ca risc-v/mpfs/icicle: add example config for ethernet 2022-03-18 17:22:27 +02:00
Janne Rosberg
d72a523c00 risc-v/mpfs: add support for ethernet 2022-03-18 17:22:27 +02:00
Janne Rosberg
07aeb12b30 risc-v/common: add call to riscv_netinitialize() 2022-03-18 17:22:27 +02:00
Janne Rosberg
8c755c9414 esp32c3-devkit/ble: add CONFIG_NETDEV_LATEINIT to defconfig 2022-03-18 17:22:27 +02:00
Janne Rosberg
cff7c760a5 bl602evb/wifi: add CONFIG_NETDEV_LATEINIT to defconfig 2022-03-18 17:22:27 +02:00
Eero Nurkkala
ec2352a4f9 risc-v/mpfs: usb: fix ep0 read done 
USB EP0 reads data from the fifo but doesn't mark the read
done which adds significant delays. Fix this unnecessary
slowdown due to operation timeouts by finishing the read
properly.

Also add a missing function description to the function
mpfs_ep_set_fifo_size().

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2022-03-18 22:47:29 +08:00
Xiang Xiao
eea014efb7 Fix error: conflicting types for built-in function 'execl'; expected 'int(const char *, const char *, ...) 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-03-18 16:38:01 +02:00
Ville Juven
15960f25a5 MPFS: Add board_memorymap.h 
Move the target specific memory map to a separate file so there is no
need to copy&paste the __xxram_start etc linker symbols to each file
that needs them.

Also add MMU flags for I/O and kernel areas, they will be needed
when the kernel runs with virtual addresses also.
 2022-03-18 09:35:00 -03:00
wangbowen6
7de7ba1b7e phy62xx_exception: using armv6-m exception_common code. 
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
 2022-03-18 20:01:00 +08:00
Xiang Xiao
8f4421a79e Fix warning: 'argnumber' may be used uninitialized in this function 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-03-18 12:43:17 +02:00
Xiang Xiao
c1bde1a4d2 sched/Kconfig: Remove CPULOAD_ENTROPY depend on CPULOAD_ONESHOT 
since it's also used by the period cpuload

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-03-18 12:43:06 +02:00
Ville Juven
ade848b60a MPFS: Use linker symbols for heap allocation 2022-03-18 18:20:12 +08:00
Ville Juven
13fd93ed2a MPFS: Add linker script for CONFIG_BUILD_KERNEL 2022-03-18 18:20:12 +08:00
Ville Juven
75afe491ad RISC-V: Prepare for CONFIG_BUILD_KERNEL 
- Thread context prior to system call needs to be preserved
- Allocate a kernel heap
 2022-03-18 18:20:12 +08:00
Ville Juven
195705d11f MPFS: Create centralized module for PLIC address handling 
Reduce complexity and copy-paste amount by implementing a module
to handle calculating PLIC offsets.
 2022-03-18 18:20:12 +08:00
Ville Juven
745f00e77d MPFS: Use riscv_mhartid to obtain hartid 
Preparation for S-mode, read mhartid via function call instead of
directly from the machine mode register
 2022-03-18 18:20:12 +08:00
Ville Juven
f8ffcbbf36 MPFS: Remove definition and reference to MPFS_PLIC_CTRL 
The register does not exist. c906 implementation has it, but MPFS does not.
 2022-03-18 18:20:12 +08:00
Ville Juven
0f91eab626 MPFS: Protected mode, fix MMU mapping 
The mapped vaddr was wrong, don't want to map the page tables, but
the user space area (start of .text) instead.
 2022-03-18 18:20:12 +08:00
Ville Juven
9269a86d00 RISC-V: Add common data memory and instruction barriers 2022-03-18 18:20:12 +08:00
zhuyanlin
5665b7a585 arch:lib_atomic: remove and fix gcc warning declaration-mismatch 
Remove GCC ignored warning and fix

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2022-03-18 13:35:42 +08:00
chao.an
19119a9c43 arch/arm: set the SP to stack top 
fix the stack imbalance

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-03-18 07:56:51 +09:00
yinshengkai
bfe29c8d1f driver/uinput: add uinput keyboard support 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2022-03-17 19:44:17 +02:00
yinshengkai
a0fa07c275 driver/keyboard: add keyboard upperhalf driver 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2022-03-17 19:44:17 +02:00
yinshengkai
20c6d50eae input/keyboard: export keyboard related macros 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2022-03-17 19:44:17 +02:00
yinshengkai
c3c6b64cc3 driver/uinput: Add cross core control function 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2022-03-17 19:44:17 +02:00
yinshengkai
eebd736891 board/sim: update uinput init & Kconfig 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2022-03-17 19:44:17 +02:00
yinshengkai
0c2f86f74d driver/touchscreen: Add multithreaded read support 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2022-03-17 19:44:17 +02:00
Abdelatif Guettouche
5085f854d0 esp32(s3)_start.c: In SMP mode, don't disable APP CPU at startup. It starts in a 
disabled state and if OpenOCD is used this will clear OpenOCD configuration.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-03-17 14:33:32 -03:00
Abdelatif Guettouche
b98676f8be esp32(s3)_cpustart.c: Don't reset app CPU if it was already configured by 
OpenOCD.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-03-17 14:33:32 -03:00
Abdelatif Guettouche
b10c8955cf arch/Kconfig: Don't depend on Xtensa for the SUPPRESS_CLOCK_CONFIG 
option.  This config was probably added in the early bring up of the
ESP32 chip. At that point the clock config was suppressed and we relied
on the bootloader.  Now we can configure the clock from NuttX.

The option itself is still useful and can be used for any other
architecture or chip.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2022-03-17 14:33:12 -03:00
Xiang Xiao
c2a1d0f5ae procfs: Remove mallinfo from struct procfs_meminfo_entry_s 
let's call mm_mallinfo directly

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-03-17 13:59:03 -03:00