sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,135 Commits 1 Branch 0 Tags 291 MiB
3c4182115d
Commit Graph

3135 Commits

Author SHA1 Message Date
Gregory Nutt
9bd23408a7 SAMA5 CAN: Don't enable some many useless error interrupts 2013-11-04 11:29:16 -06:00
Gregory Nutt
f383c5d0a4 SAMA5 CAN: Fix a data alignment problem 2013-11-03 10:41:24 -06:00
Gregory Nutt
a652c6fe42 Fixing typos from previous check-ins. Also, missed the ARMv7 IDLE stack coloration 2013-11-01 16:06:43 -06:00
Gregory Nutt
04de5c4452 Port IDLE/interrupt stack coloration to ARM and ARMv7-A architectures 2013-11-01 15:30:18 -06:00
Gregory Nutt
b8085906b9 Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane 2013-11-01 11:16:51 -06:00
Gregory Nutt
cfcd3cc74b arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null 
ified later usbdev_unregister when the caller gets the error.  From David Sidrane
 2013-10-31 15:27:52 -06:00
Gregory Nutt
dfbaa301e7 SAMA5 PWM register definition header file 2013-10-31 10:33:43 -06:00
Gregory Nutt
209d5e8383 SAMA5 SSC: Add SSC register definition header file 2013-10-30 16:15:51 -06:00
Gregory Nutt
5161f9b7ba apps/platform: A new now for platform-specific applicatin code 2013-10-30 09:04:37 -06:00
Gregory Nutt
dda3d9c47e Minor changes while pondering a camera interface 2013-10-29 16:57:06 -06:00
Gregory Nutt
08b85d4465 SAMA5 ADC: Seems functional in all modes including DMA 2013-10-28 10:08:12 -06:00
Gregory Nutt
848349bbd7 STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit 2013-10-27 16:23:44 -06:00
Gregory Nutt
93421a988e SAMA5 ADC: If DMA is enabled, then you should be able to configuration larger DMA transfers 2013-10-27 12:04:37 -06:00
Gregory Nutt
5033b9e3d6 SAMA5 ADC: Fix sample frequency scaling and sequencer setup 2013-10-27 10:29:07 -06:00
Gregory Nutt
5c5faa3119 SAMA5 ADC: Correct setup of time compare registers 2013-10-27 09:35:30 -06:00
Gregory Nutt
4bbe259082 SAM3/4 serial: Same supersitituous change as for SAMA5 2013-10-26 16:17:07 -06:00
Gregory Nutt
017d23cdb8 SAMA5 serial: Restore logic to minimize TX interrupts. Oddly, seems to improve ADC stability 2013-10-26 16:02:07 -06:00
Gregory Nutt
f090583cb2 SAMA5 TC: Debug instrumentation 2013-10-26 14:03:30 -06:00
Gregory Nutt
48ac4dcc2e SAMA5: Register definition file for camera interface 2013-10-26 08:25:58 -06:00
Gregory Nutt
6c7528f48c arch/arm/src/sama5/sam_adc.c: Remove a warning 2013-10-25 15:18:32 -06:00
Gregory Nutt
cf3845919b Add ioctl to support software triggering of ADC/DAC conversions 2013-10-25 14:19:09 -06:00
Gregory Nutt
48bcb3f141 sam_tc.c: Fix a timer initialization bug 2013-10-25 10:05:00 -06:00
Gregory Nutt
dad8aa9781 SAMA5 ADC+TC: Several updates/fixes from ongoing debug 2013-10-25 08:46:57 -06:00
Gregory Nutt
15c2d87fb9 SAMA5 ADC+TC: Early debug fixes + lots of new debug instrumentation 2013-10-24 16:50:51 -06:00
Gregory Nutt
29342298d3 SAMA5D3x-EK: Add support for app/examples/adc 2013-10-24 15:39:56 -06:00
Gregory Nutt
0e74e0fca1 SAMA5: Add ADC-side of the logic to hook in timer/counter logic needed to drive periodic ADC sampling 2013-10-24 13:56:23 -06:00
Gregory Nutt
8710cd4352 SAMA5: Hook in timer/counter logic so that it can driver periodic ADC sampling 2013-10-24 12:35:42 -06:00
Gregory Nutt
9f5b9c20fe STM32 PWM and ADC: Add some bits that should have been cleared. From Martin Lederhilger 2013-10-24 08:27:09 -06:00
Gregory Nutt
eb648c585b Add support for the STM32F207ZE chip. From Martin Lederhilger 2013-10-24 08:25:05 -06:00
Gregory Nutt
df0fc71210 Remove carriage returns from SAMA5 TC files just commited 2013-10-23 15:39:00 -06:00
Gregory Nutt
22d7fae119 SAMA5 Timer/counter library 2013-10-23 14:53:37 -06:00
Gregory Nutt
7692af99b6 STM32 F1 DAM fix from David Sidrane 2013-10-23 14:05:26 -06:00
Gregory Nutt
6a4ffaca12 SAMA5 CAN: Update readme on how to configure CAN 2013-10-23 11:32:12 -06:00
Gregory Nutt
13e074c5d4 Update Changelog 2013-10-23 09:13:28 -06:00
Gregory Nutt
856355668c SAMA5 CAN: Driver is now code complete but still untested 2013-10-22 15:47:52 -06:00
Gregory Nutt
46b0349408 SAMA5: Beginning of a CAN driver 2013-10-21 15:52:23 -06:00
Gregory Nutt
2edc58e383 SAMA5 CAN: Add register definition file 2013-10-21 12:22:27 -06:00
Gregory Nutt
f890af8e53 SAMA5 TC: Add timer/counter register definition file 2013-10-20 14:47:02 -06:00
Gregory Nutt
84973e9956 SAMA5 TRNG: /dev/random appears to be functional 2013-10-20 12:08:39 -06:00
Gregory Nutt
386daa25ca SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral 2013-10-20 11:38:31 -06:00
Gregory Nutt
1e2c37c04f SAMA5 WDT driver is now functional 2013-10-20 09:24:30 -06:00
Gregory Nutt
fe425e18a6 SAMA5 WDT: Miss watchdog fixes 2013-10-20 08:24:05 -06:00
Gregory Nutt
7a1d5866e5 SAMA5: Initial WDT timer (untested) 2013-10-19 12:26:47 -06:00
Gregory Nutt
49b3366eff SAMA5: Hook RTC into build system; Finish RTC alarm logic; Verify correct behavior of the basic RTC functionality 2013-10-19 10:41:20 -06:00
Gregory Nutt
0a5d287e69 SAMA5: Add GPBR register definitions 2013-10-19 10:22:21 -06:00
Gregory Nutt
d1d9cf4de6 SAMA5 RTC: Beginning of an RTC driver for the SAMA5 2013-10-18 16:56:46 -06:00
Gregory Nutt
0eea9f2ebe SAMA5: Add RTC and WDT register definition header files 2013-10-18 14:47:50 -06:00
Gregory Nutt
b661ba3e2a STM32 DMA Priority: Select the correct default for F1 and other family members 2013-10-18 14:13:53 -06:00
Gregory Nutt
1b3127149c SAMA5 LCD: Move framebuffers to center of free memory region. That creates a guard band around the framebuffers that gives a little protection from any bad writes into the framebuffer 2013-10-18 10:11:20 -06:00
Gregory Nutt
5c3f7f118c Add SDIO preflight method 2013-10-18 08:15:09 -06:00
Gregory Nutt
fd468d219f Changes to stm32_dmacapable interfaces from Mike Smith 2013-10-18 08:06:23 -06:00
Gregory Nutt
0c44715f07 STM32 DMA priority corrections from Mike Smith 2013-10-18 07:37:24 -06:00
Gregory Nutt
cda1fd00c7 Typo fixes for UART7 and UART8 DMA configs. From Mike Smith 2013-10-18 07:17:55 -06:00
Gregory Nutt
2d831bc717 SAMA5 TSD: Fix to prohibit reading samples when not valid 2013-10-17 17:26:06 -06:00
Gregory Nutt
8924101566 STM32 F103C: Correct some errors in pinmapping. From David Sidrane 2013-10-16 07:26:41 -06:00
Gregory Nutt
83982f3ef9 Misc changes to README files; Update SAMA5D3x-EK NxWM configuration to use Calibration instruction messages 2013-10-14 14:53:38 -06:00
Gregory Nutt
98ffd096a0 SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported 2013-10-13 13:08:05 -06:00
Gregory Nutt
a3bb8d3d94 SAMA5 LCDC: Move framebuffer to lower memory; I suspect some corruption by interference 2013-10-13 10:42:14 -06:00
Gregory Nutt
34557b8c6b SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes 2013-10-11 17:12:35 -06:00
Gregory Nutt
1d0e7aaeff SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work) 2013-10-10 18:44:08 -06:00
Gregory Nutt
57d04d3ff5 SAMA5 LCDC: Default resolution if now RGB565; Add option to select a different output resolution than the sofware resolution (needs to the 24BPP for this LCD). 2013-10-10 18:41:42 -06:00
Gregory Nutt
c79ae66fc2 SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM 2013-10-10 12:02:41 -06:00
Gregory Nutt
1dfcee203c SAMA5: Allow portions of external memory to be added to the heap instead of the whole thing 2013-10-10 12:00:32 -06:00
Gregory Nutt
e4e4912712 SAMA5 LCDC: Fix a few compilation errors that show up when additional layers are enabled 2013-10-09 18:46:05 -06:00
Gregory Nutt
b7f4a51ee2 SAMA5 LCDC: Few more bug fixes but still not working 2013-10-09 18:22:21 -06:00
Gregory Nutt
cc23806fa1 SAMA5 LCDC: Corrections from first debug sessions. Still a way to go 2013-10-09 13:21:27 -06:00
Gregory Nutt
f3a4fc42d7 SAMA5: LCDC driver incorporated into the build system. 2013-10-08 15:30:38 -06:00
Gregory Nutt
3ccbb7a07f SAMA5: LCD driver is code complete but untested 2013-10-08 12:16:30 -06:00
Gregory Nutt
3fd7f4f855 SAMA5: More LCDC driver progress 2013-10-08 08:57:48 -06:00
Gregory Nutt
f6dc32c30c SAMA5: More LCDC driver progress 2013-10-07 15:54:08 -06:00
Gregory Nutt
c7c6186356 SAMA5: LCDC driver progress 2013-10-07 12:05:16 -06:00
Gregory Nutt
cfd257cc0c SAMA5 LCDC: Add 'skeleton' files that will eventually become an LCDC driver for the SAMA5 2013-10-06 09:08:52 -06:00
Gregory Nutt
74db990b7e SAMA5: Completes LDCDC register definition file 2013-10-04 15:43:19 -06:00
Gregory Nutt
021bdecb05 SAMA5: Add LCD register definition header file 2013-10-04 10:11:12 -06:00
Gregory Nutt
5c9926b61e SAMA5: Touchscreen driver now works 2013-10-04 08:03:38 -06:00
Gregory Nutt
ac66287ba7 SAMA5: First changes from touchscreen debug 2013-10-03 17:11:30 -06:00
Gregory Nutt
889ea78194 SAMA5: ADC and touchscreen drivers now build without errors 2013-10-03 14:32:21 -06:00
Gregory Nutt
0001191f6c SAMA5: Integrate touchscreen and ADC drivers into the build 2013-10-03 12:49:13 -06:00
Gregory Nutt
db6d76baf5 SAMA5 ADC and touchscreen: Drivers are code complete and ready for test 2013-10-03 10:06:14 -06:00
Gregory Nutt
8b8523f935 SAMA Touchscreen/ADC: More progress 2013-10-02 16:55:22 -06:00
Gregory Nutt
b885459624 Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations 2013-10-02 08:24:46 -06:00
Gregory Nutt
afa475e948 SAMA5 ADC/Touchscreen: A little more logic 2013-10-01 14:40:34 -06:00
Gregory Nutt
183421fe07 KL: Now builds up_puts 2013-10-01 11:51:27 -06:00
Gregory Nutt
e4074e1e21 KL: Missing header file in low level getc logic 2013-10-01 11:25:01 -06:00
Gregory Nutt
bb6b31f495 SAMA5 touchscreen and ADC: A little more progress 2013-10-01 11:23:24 -06:00
Gregory Nutt
7120517af0 SAMA5 ADC/Touchscreen: A little more progress. Still not complete 2013-09-30 14:28:42 -06:00
Gregory Nutt
d4e689ef1a Add freedom-kl25z/minnsh configuration: This is an experiment to see just how small we and get an NSH configuration. From Alan Carvalho de Assis. 2013-09-30 09:20:11 -06:00
Gregory Nutt
dc3ac21264 KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis 2013-09-30 09:15:31 -06:00
Gregory Nutt
babcd56908 KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis 2013-09-30 09:11:54 -06:00
Gregory Nutt
3027dd3c54 SAMA5: Framework for an touchscreen driver (incomplete) 2013-09-30 09:04:21 -06:00
Gregory Nutt
e1fc3f51b3 SAMA5 ADC: Framework for an ADC driver (incomplete) 2013-09-30 07:22:34 -06:00
Gregory Nutt
05eb7e3da4 SAMA5 ADC: Beginning ADC register definition file 2013-09-29 18:34:09 -06:00
Gregory Nutt
fbf5359a39 Work around a start-up error in the GMAC that I still do not understand 2013-09-29 16:46:22 -06:00
Gregory Nutt
0e5caa2ae3 SAMA5 GMAC: Various fixes from initial debug 2013-09-29 15:03:57 -06:00
Gregory Nutt
7c81618f2f Dependency generation fix for directories that keep object files in a sub-directory 2013-09-29 11:46:10 -06:00
Gregory Nutt
4aaee6fb3c Clean up some naming: fd vs. fildes vs. filedes and filep vs filp 2013-09-28 16:50:07 -06:00
Gregory Nutt
22d0ebeb07 configs/compal_e88 converted to use the kconfig-frontends tools 2013-09-27 16:12:44 -06:00
Gregory Nutt
9fcbd8879a SAMA5 GMAC and GMII support is code complete and ready for test 2013-09-27 13:12:04 -06:00
Gregory Nutt
f519f94926 Networking: Fix backward conditional in test to see if address is in ARP table. From Max Holtzberg 2013-09-27 08:27:35 -06:00
Gregory Nutt
fbd09bd75f Beginng of support for GMII/RGMII PHYs 2013-09-26 15:55:21 -06:00