sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
41,431 Commits 1 Branch 0 Tags 291 MiB
42232fa98e
Commit Graph

41431 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Abdelatif Guettouche
42232fa98e Documentation/esp32c3: Fix the OpenOCD board. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-12 10:16:05 -03:00
chenwen
16667930cb risc-v/esp32c3: Support ESP32-C3 PM standby and sleep 2021-05-12 10:15:06 -03:00
Tanushree Baindur
3156aa7532 Apps Issue #246: Replace romdisk_register() with boardctl(BOARDIOC_ROMDISK) 
C file changes:
examples/bastest/bastest_main.c, examples/elf/elf_main.c,
examples/module/module_main.c, examples/posix_spawn/spawn_main.c,
examples/romfs/romfs_main.c, examples/sotest/sotest_main.c,
examples/unionfs/unionfs_main.c

Corresponding defconfig files added/modified to test above changes:
       new file:   boards/sim/sim/sim/configs/bastest/defconfig
       new file:   boards/sim/sim/sim/configs/elf/defconfig
       modified:   boards/sim/sim/sim/configs/module/defconfig
       new file:   boards/sim/sim/sim/configs/posix_spawn/defconfig
       new file:   boards/sim/sim/sim/configs/romfs/defconfig
       modified:   boards/sim/sim/sim/configs/sotest/defconfig
       modified:   boards/sim/sim/sim/configs/unionfs/defconfig
       modified:   boards/sim/sim/sim/configs/module32/defconfig
       modified:   boards/sim/sim/sim/configs/sotest32/defconfig
 2021-05-12 04:42:18 -07:00
Abdelatif Guettouche
5bd970df4f Documentation/esp32c3: Explain debugging with OpenOCD. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-12 04:40:41 -07:00
Abdelatif Guettouche
df7bd125f8 boards/risc-v/esp32c3: Convert the README.txt to the new Documentation. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-12 04:40:41 -07:00
Xiang Xiao
276fa2ff1c drivers/serial: Change the default value of SERIAL_NPOLLWAITERS to 4 
since the console is normally opened three time as stdin, stdout and
stderr and remove the dependence on STANDARD_SERIAL because other type
of serial drivers also support the poll through the same codebase.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie68322c4647cc838b295491329969869d6ba310b
 2021-05-11 16:45:22 +01:00
Xiang Xiao
60c1b64747 libc/getopt: Remove GETOPT_INIITIALIZER macro 
since nobody reference it

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-05-11 16:40:44 +01:00
Xiang Xiao
6ebc1b27fa libc/pwd: Add NSS_BUFLEN_PASSWD macro 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I739679038b2004cc45d78f540831ba81b088a586
 2021-05-11 16:40:33 +01:00
Raman Gopalan
9b4014d048 avr32dev1: USART1 RX: Reassign pin 2021-05-10 17:11:05 -03:00
Juha Niskanen
abcb67a292 Remove final remaining CONFIG_DISABLE_SIGNALS and CONFIG_DISABLE_SIGNAL 2021-05-10 17:04:38 -03:00
Nathan Hartman
8af9d39667 Documentation, comments: Minor improvements and typos fixed 2021-05-09 19:12:13 -07:00
Xiang Xiao
56d0fbf68e nuttx/fs/fs.h: Correct the comment for the return value of nx_dup2 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-05-09 23:11:16 +01:00
Xiang Xiao
db517cc229 include/spawn.h: Add POSIX_SPAWN_SETSID definition 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7ad654a1cb9b74a9f27f52c88fffa8b487a48f33
 2021-05-09 12:34:34 -03:00
Simon Piriou
87375ae2ac fs/eventfd: add EVENT_FD_POLL as a Kconfig dependency for EVENT_FD_NPOLLWAITERS 2021-05-08 08:29:21 -07:00
Gustavo Henrique Nihei
f547883747 tools/nxstyle: Extend check to any URI scheme 2021-05-07 19:38:10 -07:00
Diego Herranz
a1c4ba379f drivers/sensors/hdc1008: add missing break 
It was not possible to use the HDC1008_MEAS_T_AND_RH
operation mode since it was running the default case too.
 2021-05-07 21:19:14 -03:00
David Sidrane
17b786399c stm32:SDIO:Use 250 Ms Data path timeout, regardless of Card Clock frequency 2021-05-07 17:39:08 -04:00
David Sidrane
3e49d49cd9 stm32h7:SDMMC:Use 250 Ms Data path timeout, regardless of Card Clock frequency 2021-05-07 17:39:08 -04:00
David Sidrane
c45e03b75f stm32f7:SDMMC:Use 250 Ms Data path timeout, regardless of Card Clock frequency 2021-05-07 17:39:08 -04:00
Gustavo Henrique Nihei
90a4e8d718 risc-v/esp32c3: Fix DMA channels' interrupt IDs 2021-05-07 16:46:41 -03:00
Dong Heng
bd8e37bb4b risc-v/esp32c3: Add ESP32-C3 (G)DMA driver and testing 2021-05-07 16:46:41 -03:00
Xiang Xiao
b8ed17b9da libc/termios: Implement TCSADRAIN and TCSAFLUSH for tcsetattr 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: If87a4931cd5a55e064f58c19a22c7ce13f538000
 2021-05-07 16:35:41 -03:00
Xiang Xiao
bf733f7213 libc/pty: Make ptsname[_r] support PSEUDOTERM_BSD config too 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I82a60ded48ea3437bd5f2b4fe328294d7077b040
 2021-05-07 16:35:20 -03:00
Liio Chen
468e08c1b4 binnfmt:Fix return before close ELF fd 
elf_init open a elf file , if both enabled
   CONFIG_NSH_BUIlTAPPS and CONFIG_NSH_FILE_APPS ,
   elf_init will read elf file in /bin directory, but
   that length is zero , elf_read failed return and NOT
   close elf fd, so this line MUST be return to errout_with_init
 2021-05-07 06:42:15 -07:00
Harri Luhtala
e5f1069654 arch/arm/src/stm32l4/hardware/stm32l4xrxx: pinmap alternative function for SPI2 2021-05-07 05:08:05 -07:00
Raman Gopalan
649e680f75 avr32dev1: Suppress linker error: Placeholder for board_app_initialize() 2021-05-06 11:25:38 -03:00
Raman Gopalan
9044594545 at32uc3_gpioirq.c: Fix typo: contex -> context 2021-05-06 11:25:38 -03:00
Julian Oes
644a0cd525 drivers/serial: fix Rx interrupt enable for cdcacm 
This is addressing an issue where Rx interrupts were not restored for
cdcacm after the buffer had been filled (in a burst).
The Rx interrupts were only restored after the watchdog timeout of 200ms
fired.

This happened because CONFIG_SERIAL_RXDMA was set, however, for the
cdcacm driver this does not actually matter as it is relying on
uart_enablerxint to be called via the ops table.

This patch makes sure that uart_enablerxint and uart_disablerxint are
always called, independent of CONFIG_SERIAL_RXDMA, relying on the ops
table to be correct for the case where it should be only a no-op.
 2021-05-06 06:49:07 -07:00
Gustavo Henrique Nihei
886009f15f tools/nxstyle: Add _Atomic keyword to whitelisted words 2021-05-06 06:48:59 -07:00
Max Kriegleder
8bcef02324 boards/nucleo-h743zi2: added netnsh config 2021-05-05 18:21:44 -03:00
Gustavo Henrique Nihei
87eb84ad73 nuttx/spi: Apply some fixes to SPI Slave documentation 2021-05-05 16:56:07 -03:00
Gustavo Henrique Nihei
534c058d93 spi: Adopt CPHA as the abbreviation for clock phase 2021-05-05 16:56:07 -03:00
David Sidrane
92dba32c8c stm32h7:Allow for reuse of the OTG_ID GPIO 
Currently Nuttx doesn't seem to be any real support for OTG.
    In the future when OTG is supported. This Knob can be removed
    and drivers can enable their pin sets based on CONFIG_OTG.
    (Adding CONFIG_OTG at this time would be misleading.)
 2021-05-05 12:22:11 -04:00
David Sidrane
cd603af958 stm32f7:Allow for reuse of the OTG_ID GPIO 2021-05-05 12:22:11 -04:00
David Sidrane
8624f9a444 s32k1xx:flexcan Use inttypes in printing macro 2021-05-05 06:07:50 -07:00
David Sidrane
7fb59e4f36 kinetis:flexcan Use inttypes in printing macro 2021-05-05 06:07:50 -07:00
David Sidrane
e5ceb062f9 stm32f7:Use inttypes in printing macro 
stm32f7:SDMMC Use inttypes in printing macro

stm32f7:CAN Use inttypes in printing macro

stm32f7:DMA Use inttypes in printing macro

stm32f7:serial fix compile error from UNUSED() change
 2021-05-05 06:07:50 -07:00
David Sidrane
cbe3e120d5 stm32h7:Use inttypes in printing macros 2021-05-05 06:07:50 -07:00
Jukka Laitinen
9b8399effe lib_modfl: Use fabsl instead of fabs for long double arguments 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-05-05 06:05:58 -07:00
raiden00pl
a74ea51aae drivers/timers/pwm.c: fix compilation warnings 2021-05-05 09:32:58 -03:00
raiden00pl
b721ba05aa stm32_pwm.c: fix compilation warnings 2021-05-05 09:32:58 -03:00
raiden00pl
7cb7fe3f38 stm32_pwm: fixes for PULSECOUNT support 
1. generate an indefinite number of pulses when info->count = 0
2. timers that don't support pulse-count shouldn't use pulse-count logic
 2021-05-05 09:32:58 -03:00
Sara Souza
873293cc3f xtensa/esp32: Applies REG_MASK to extract a field value 2021-05-05 01:30:03 -07:00
Sara Souza
50daf24242 esp32/esp32-c3: Adds two helpers to extract and include a field value 2021-05-05 01:30:03 -07:00
Sara Souza
cce42d5f74 xtensa/esp32: Reorganize the pins initialization and adds showprogress in __start 2021-05-05 01:30:03 -07:00
Sara Souza
afd6b26232 xtensa/esp32: Replace serialout/in and fixes the fifo counter issue 2021-05-05 01:30:03 -07:00
Abdelatif Guettouche
f3a6d80c95 esp32c3/hardware: Include files of the same level by their names only and 
remove unnecessary includes.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-05 01:28:22 -07:00
Abdelatif Guettouche
e24af207f8 esp32/hardware: Include files of the same level by their names only and 
remove unnecessary includes.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-05 01:28:22 -07:00
raiden00pl
7b53a5fe1c stm32_adc.c: rename a struct member in struct adccmn_data_s from 'initialized' to 'refcount' 2021-05-05 01:27:56 -07:00
raiden00pl
3fb78a8299 drivers: move the generic upper-half motor driver from drivers/power to drivers/motor 2021-05-05 09:00:22 +02:00