Most of the functions used to describe the SoCs capabilities are
available for all Espressif's chips. This commit uses this set of
common functions and remove outdated functions that perform the
same operations in a chip level.
1. pm configuration demonstrates the use of power management present on the ESP32-S3.
2. You can use the pmconfig command to test the power management, for details look at
``Documentation/platforms/xtensa/esp32s3/boards/esp32s3-devkit/index.rst``
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32s3 targets and removes the need
for running 'make bootloader' command for it.
Other related fix, but not directly to Simple Boot:
- Instrumentation is required to run from IRAM to support it during
initialization. `is_eco0` function also needs to run from IRAM.
- `rtc.data` section placement was fixed.
- Provide arch-defined interfaces for efuses, in order to decouple
board config level from arch-defined values.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
This commit implements the common RMT driver (already available for
the other Espressif's xtensa-based devices) for ESP32.
This allows us to have a proper separation between the lower and
upper-half drivers and use the 'ws2812' example to drive WS2812 RGB
LEDs.
This commit just rearranges the order of the types, data and
functions without modifying them. This is done to make it look more
similar with ESP32's ble adapter and ease maintanence.
Most of the functions used to set the peripherals are available for
all Espressif's chips. This commit uses this set of functions and
remove outdated functions that perform the same operations in a
chip level.
This commit updates the Wi-Fi and the BLE driver of ESP32. Most of
the changes rely on using the common sources and header files for
xtensa-based Espressif's SoCs.
The new Wi-Fi driver supports WPA3-SAE for both Station and SoftAP
mode. BLE's coexistence mode was enhanced according to the latest
libraries.
Please note that other sources required minor changes in order to
be compatible with the common sources.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
This driver is used with QEMU, to make it possible
to use networking.
This is not the MAC in ESP32, however, it can be used with QEMU.
The code was shamelessly copied from 31dac92e5f
cpu0 thread0: cpu1:
sched_yield()
nxsched_set_priority()
nxsched_running_setpriority()
nxsched_reprioritize_rtr()
nxsched_add_readytorun()
up_cpu_pause()
IRQ enter
arm64_pause_handler()
enter_critical_section() begin
up_cpu_paused() pick thread0
arm64_restorestate() set thread0 tcb->xcp.regs to CURRENT_REGS
up_switch_context()
thread0 -> thread1
arm64_syscall()
case SYS_switch_context
change thread0 tcb->xcp.regs
restore_critical_section()
enter_critical_section() done
leave_critical_section()
IRQ leave with restore CURRENT_REGS
ERROR !!!
Reason:
As descript above, cpu0 swith task: thread0 -> thread1, and the
syscall() execute slowly, this time cpu1 pick thread0 to run at
up_cpu_paused(). Then cpu0 syscall execute, cpu1 IRQ leave error.
Resolve:
Move arm64_restorestate() after enter_critical_section() done
This is a continued fix with:
https://github.com/apache/nuttx/pull/6833
Signed-off-by: ligd <liguiding1@xiaomi.com>
Use private naming to avoid conflicts with user applications
In file included from libuv/src/unix/internal.h:25,
from libuv/src/unix/udp.c:23:
libuv/src/uv-common.h:57: warning: "container_of" redefined
57 | #define container_of(ptr, type, member) \
|
In file included from nuttx/include/nuttx/list.h:47,
from nuttx/include/nuttx/tls.h:40,
from nuttx/include/nuttx/sched.h:48,
from nuttx/include/nuttx/arch.h:87,
from nuttx/include/nuttx/userspace.h:35,
from nuttx/include/nuttx/mm/mm.h:30,
from nuttx/include/nuttx/kmalloc.h:34,
from nuttx/include/nuttx/lib/lib.h:31,
from nuttx/include/stdio.h:35,
from apps/system/libuv/libuv/include/uv.h:59,
from libuv/src/unix/udp.c:22:
nuttx/include/nuttx/nuttx.h:48: note: this is the location of the previous definition
48 | #define container_of(ptr, type, member) \
|
Signed-off-by: chao an <anchao@lixiang.com>
1. Fix issue of system blocking due to disable dcache.
2. Support Ext-SRAM-Cache mmu mapping in SMP mode.
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
The board's microphone uses 24-bit i2s and this commit also fixes
the segmentation fault caused by the audio buffer overflow.
arch/xtensa/src/esp32/esp32_i2s.c: Fix bug regarding 24-bit audio and add AUDIOIOC_STOP to ioctl
drivers/audio/audio_i2s.c: Report number of channels on AUDIOIOC_GETCAPS
in boards/xtensa/esp32/esp32-sparrow-kit:
/configs/nsh/defconfig: Add I2S configs
/src/esp32-sparrow-kit.h: Add the signature of esp32_i2sdev_initialize()
/src/esp32_bringup.c: Add call to esp32_i2sdev_initialize()
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
WS2812 data is encoded into RMT items according to the RMT clock
source. This commit makes it by using the actual clock source in
spite of a pre-defind value.
Enable with ./tools/configure.sh -l esp32-devkitc:dac
DAC channel 0 = GPIO 25
DAC channel 1 = GPIO 26
default path: /dev/dac0
Resolution 8 bits = values 0~255
Voltage: 0~Vref
The reference voltage 'Vref' here is input from the pin VDD3P3_RTC
which ideally equals to the power supply VDD (3.3V).
- A pre-built IDF bootloader is used by default;
- `ESP32S3_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32S3_PARTITION_TABLE.
- A pre-built IDF bootloader is used by default;
- `ESP32S2_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32S2_PARTITION_TABLE.
- A pre-built IDF bootloader is used by default;
- `ESP32_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32_PARTITION_TABLE.
ESP32 is supported on NuttX starting from chip revision 3.0. This,
however, didn't prevent the user from using older chip revisions,
which caused unexpected behaviors. This commit checks chip revision
before finishing booting NuttX.
This commit is intended to update the EFUSE's register content and
update related configs:
- Remove duplicated configs from `esp32_soc.h`;
- Add missing header files from APB registers;
- Add missing macro definitions from EFUSE;
- Update related code to use the new macros;
Newly added logging in `sched/task_exit.c` obsoletes the existing
ones in `arch/up_exit()`, thus remove the latter to reduce duplications.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
The RT-Timer thread may call the `start_rt_timer` function. This
function gets the spinlock with interrupts disabled to ensure
exclusive access. However, this was already being performed in the
RT-Timer thread, causing a deadlock.
Following up the 'Espressif HAL fullly integration for ESP32s2/s3'
changes in https://github.com/apache/nuttx/pull/11428
There are few missing interrupt type constants need update. So
update them to avoid the build error.
By integrating the Espressif`s HAL repository into the current
ESP32-S2 implementation on NuttX, it is possible to call functions
that makes it easier to setup the registers of the ESP32-S2,
enabling the usage of common Espressif drivers.
By integrating the Espressif`s HAL repository into the current
ESP32-S3 implementation on NuttX, it is possible to call functions
that make it easier to set up the registers of the ESP32-S3 and
enables the usage of common Espressif drivers. Please note that
Espressif's HAL repository was already being used for the Wi-Fi
driver. Then, this commit includes other source files to be used
by other drivers other than Wi-Fi and reorganize the build process.
This lower-half WS2812 LED driver uses the RMT peripheral of the
Espressif's SoCs to drive the RGB addressable LEDs. Compared to
the SPI-based implementation, it is faster!
The lower-half implementation of the RMT character driver based on
Espressif HAL enables using the RMT peripheral of ESP32, ESP32-S2
and ESP32-S3 as a common xtensa-based Espressif driver.
The RMT packages on Espressif SoCs are 4-byte long and are known as
"items". Please check the Techinal Reference Manual of the chip to
obtain more details.
1. Solve wifi may not work bug for bbpll not lock or not stable when enable RF.
2. Improved timing tuning stability on ESP32-S3.
The root cause of the issue:
The application won't re-calibrate the BBPLL clock if it's already enabled.
We add a force-recalib function in the app startup code to make sure even if
the patch is applied by OTA, the clock is still re-calibrated.
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
The `xxx_ipv6multicast` function in each driver is not adapted to
multiple IPv6 addresses yet, and they're redundant, so try to take them
into common code.
Change:
1. Add MAC `g_ipv6_ethallnodes` and `g_ipv6_ethallrouters` in
`icmpv6_devinit` and call them in `netdev_register`
2. Add multicast MAC for Neighbor Solicitation when adding any IPv6
address, and remove them when IPv6 address is removed
3. Select `NET_MCASTGROUP` when `NET_ICMPv6` because now we need
`d_addmac` when we have ICMPv6
Note:
We want modules outside net stack to call functions like
`netdev_ipv6_add` and never touch the related MAC address, so these MAC
functions are added as internal functions to `net/netdev/netdev.h`
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Add registration function instrumentation API,
which can achieve instrumentation of entering and
exiting functions through the compiler's functionality.
We can use CONFIG_ARCH_INSTRUMENT_ALL to add instrumentation for all
source, or add '-finstrument-functions' to CFLAGS for Part of the
source.
Notice:
1. use CONFIG_ARCH_INSTRUMENT_ALL must mark _start or entry noinstrument_function,
becuase bss not set.
2. Make sure your callbacks are not instrumented recursively.
use instrument_register to register entry function and exit function.
They will be called by the instrumented function
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
1. Configurable mapping of virtual address to psram physical address
2. Access SPIRAM memory at high physical address through bank switching
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
1. If CONFIG_ESP32S3_PHY_INIT_DATA_IN_PARTITION and CONFIG_ESP32S3_SUPPORT_MULTIPLE_PHY_INIT_DATA are enabled,
PHY initialization data (PHY initialization data is used for RF calibration) will be loaded from a partition.
2. The corresponding PHY init data type can be automatically switched according to the country code,
China's PHY init data bin is used by default, country code can be modified through the wapi command: wapi country <ifname> <country code>.
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
This commit sets the BLE's interrupt as a IRAM-enabled interrupt,
which enables it to run during a SPI flash operation. This enables
us to create a cache to off-load semaphores and message queues
operations and treat them when the SPI flash operation is finished.
By doing that, we avoid packet losses during a SPI flash operation.
This commit provides an interface to register ISRs that run from
IRAM and keeps track of the non-IRAM interrupts. It enables, for
instance, to avoid disabling all the interrupts during a SPI flash
operation: IRAM-enabled ISRs are, then, able to run during these
operations.
It also makes the code look more similar to the ESP32-S3 SPI flash
implementation by creating a common `esp32_spiflash_init` that is
responsible to create the SPI flash operation tasks. The function
intended to initialize the SPI flash partions was, then, renamed to
`board_spiflash_init`.
Whenever we enter/leave a critical section, the interrupt status is
saved and, then, restored. However, for the ESP32's BLE adapter,
entering/leaving a critical section is done on separate functions
that need to be registered as a callback.
The status flag was being saved as a global variable. However,
calling nested enter_critical_section would overwrite this global
variable that was storing the previous flag and, when leaving the
last critical section, the restored status would be different from
the one expected. The proposed solution for this issue is to create
a global array to store the interrupt status flags for nested calls.
When ESP32's BLE is enabled, select the option to pin the HCI TX
thread to a specific core. This is necessary to avoid problems
with the BLE task that runs pinned to the PRO CPU (core 0) while
running with SMP enabled.
The BIT macro is widely used in NuttX,
and to achieve a unified strategy,
we have placed the implementation of the BIT macro
in bits.h to simplify code implementation.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
or long time data transmission.
The spin_lock in the wlan_recvframe() function that receives
RX data packets from the wireless network card and the critical
section lock in the iob_remove_queue() processing are nested,
which causes the interrupt to be disabled for a longer period
of time, resulting in a risk of deadlock.
When we build NuttX on macOS, it shows many `sed` messages (and the build still completes successfully):
```text
$ tools/configure.sh pinephone:nsh
$ make
sed: illegal option -- r
```
This is due to the Makefiles executing `sed -r` which is not a valid option on macOS.
This PR proposes to change `sed -r` to `sed -E` because:
- `sed -E` on macOS is equivalent to `sed -r` on Linux
- `sed -E` and `sed -r` are aliases according to the GNU `sed` Manual
- `sed -E` is already used in nuttx_add_romfs.cmake, nuttx_add_symtab.cmake and process_config.sh
It looks like we do not need to send the 9 clock ticks whenever we reset
the FSM. We are already doing this in i2c_reset function if necessary.
This makes the i2c transfers much faster, for example the i2c(-tool) dev
scan feature.
Whenever we enter/leave a critical section, the interrupt status is
saved and, then, restored. However, for the ESP32-S3's BLE adapter,
entering/leaving a critical section is done on separate functions
that need to be registered as a callback.
The status flag was being saved as a global variable. However,
calling nested enter_critical_section would overwrite this global
variable that was storing the previous flag and, when leaving the
last critical section, the restored status would be different from
the one expected. The proposed solution for this issue is to create
a global array to store the interrupt status flags for nested calls.
This commit sets the BLE's interrupt as a IRAM-enabled interrupt,
which enables it to run during a SPI flash operation. This enables
us to create a cache to off-load semaphores and message queues
operations and treat them when the SPI flash operation is finished.
By doing that, we avoid packet losses during a SPI flash operation.
This commit provides an interface to register ISRs that run from
IRAM and keeps track of the non-IRAM interrupts. It enables, for
instance, to avoid disabling all the interrupts during a SPI flash
operation: IRAM-enabled ISRs are, then, able to run during these
operations.
When allocating a CPU interrupt, make sure to select the correct
CPU core to query for it. Simply checking for the current CPU does
not satisfy this requirement because the CPU allocation thread may
be executed by the other core: it's necessary to stick with the
intended CPU passed as an argument of the `esp32s3_setup_irq`.
The registered `task_create_wrapper` receives the `core_id`, but
the current implementation ignores this parameter while calling
`esp_task_create_pinned_to_core`. This commit fix this.
When allocating a CPU interrupt, make sure to select the correct
CPU core to query for it. Simply checking for the current CPU does
not satisfy this requirement because the CPU allocation thread may
be executed by the other core: it's necessary to stick with the
intended CPU passed as an argument of the `esp32_setup_irq`.
