David Sidrane
7cc0a06f44
STM32: Allow the config to override the clock edge setting
2016-12-06 13:30:07 -10:00
Max Kriegleder
1d50259358
STM32 F4 I2c: A new implementation of the STM32 F4 I2C bottom half. The commin I2C as this did not handled correctly in the current implementation (see also https://github.com/PX4/NuttX/issues/54 ). The changes almost exclusively affect the ISR.
2016-10-24 16:32:10 -06:00
Maciej Wójcik
c719a32a40
add tim8 to stm32f103v pinmap
2016-10-19 16:34:07 +02:00
Gregory Nutt
30598c005f
Cosmetic changes from review of last PR
2016-10-15 08:56:11 -06:00
David Sidrane
909ea5e8ef
F4 Support versampling by 8
2016-10-15 03:56:07 -10:00
Jens Gräf
1d3abd17cc
dma2d: fix an error in up_dma2dcreatelayer where an invalid pointer was returned when a certain underlying function failed.
2016-10-07 13:42:24 +02:00
Gregory Nutt
d61239e38f
stm32_modifycr2 should be available on all platforms is DMA is enabled.
2016-10-06 08:50:52 -06:00
Sebastien Lorquet
9dcecd4b15
Add support for qencoders on various nucleo boards
2016-10-03 16:07:20 +02:00
Neil Hancock
ef475eb6a9
STM32 Ethernet: Correct typo in conditional logic
2016-10-01 07:32:41 -06:00
Mateusz Szafoni
9742757f26
Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not present in RMII
2016-09-22 10:05:45 +02:00
Pierre-noel Bouteville
829de7d5bd
Set USB address to avoid a failed assertion
2016-09-15 08:36:45 -06:00
Gregory Nutt
9c3bade7b4
net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck.
2016-08-30 07:59:57 -06:00
David Sidrane
f2809d52d3
stm32_otgfsdev.c edited online with Bitbucket
...
dup SOF removed as noted by Sébastien Lorquet
2016-08-26 17:20:38 +00:00
David Sidrane
87f4a8033a
BugFix:Lost first word from FIFO
...
1) Do not overwrite Reserved Bits in GINTSTS (per ref manual)*
2) Acknowledge all pending int on entry to ISR that are Only rc_w1*
3) Do not disable RXFVL*
4) Loop until RXFVL is cleared*
5) Only clear the NAK on the endpoint on the OTGFS_GRXSTSD_PKTSTS_SETUPDONE to
not loose the first WORD of FIFO all the data (Bug Fix)
Changed marked *are just driver clean up and ensure ints are not lost.
The bug fix is #5
Test case open putty and observer the Set/Get LineCoding
Without this fix #5 the Get will not match the Set, and
infact the data might be skewed by 4 bytes, that are lost
from the FIFO if the OTGFS_DOEPCTL0_CNAK bit is set in the
OTGFS_GRXSTSD_PKTSTS_SETUPRECVD as opposed to the OTGFS_GRXSTSD_PKTSTS_SETUPDONE
Set Line Coding DATA1: 4B | 00 c2 01 00 00 00 08 | c8 1B
Get Line Coding DATA1: 4B | .. .. .. .. 00 00 08 c8 .. 00 00 07 | 7a 72
2016-08-25 06:51:52 -10:00
Aleksandr Vyhovanec
6bc952a2cc
STM32: Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and STM32F107RC.
2016-08-24 10:10:33 -06:00
Gregory Nutt
ae37c9859f
Cosmetic changes from review of PR 120
2016-08-19 06:32:28 -06:00
Michał Łyszczek
0f175039ad
Fix compilation warnings for stm32 eth with certain configs
2016-08-19 09:18:18 +02:00
Gregory Nutt
c0074fd6b8
Merged in mlyszczek/nuttx/stm32butterfly2_board (pull request #118 )
...
add stm32butterfly2 development board
2016-08-18 11:14:10 -06:00
Alan Carvalho de Assis
a3e1bdde14
STM32 SPI: Fix STM32F3XXX SPI driver to read 8-bit correctly.
2016-08-18 08:38:49 -06:00
Gregory Nutt
d369eeec95
Remove a misleading comment
2016-08-18 07:13:04 -06:00
Gregory Nutt
01ae660c6c
Merged in K-man23/nuttx/stm32_adc_fix (pull request #117 )
...
Change stm32 adc dma callback to send channel number instead of index
2016-08-17 14:05:37 -06:00
Konstantin Berezenko
9b3bbc0f09
Change stm32 adc dma callback to send channel number instead of index
2016-08-17 13:02:36 -07:00
Michał Łyszczek
a05d9c18da
Add connectivity line stm32 to be able to compile SYSCFG, add definitions for
...
usb clock divs
2016-08-17 20:11:15 +02:00
Konstantin Berezenko
42ee88fe89
STM32F411 and STM32F446 map i2c2_sda_4 to different alternate function numbers
2016-08-17 11:01:44 -07:00
Gregory Nutt
8052dc4955
STM32 SPI: nbits should be unsigned. Valid range is 4-16 for F3 and L4. 8 or 16 for others.
2016-08-13 16:01:50 -06:00
Gregory Nutt
1a10518dae
Update ChangeLog
2016-08-13 12:03:12 -06:00
Gregory Nutt
eed5e41626
Add some comments
2016-08-13 10:24:40 -06:00
Gregory Nutt
172761163b
STM32F3 SPI: Cannot write 16-bit value to DR register because of how the F3 implements data packing.
2016-08-13 10:11:23 -06:00
Gregory Nutt
51fcd89b98
Add and fix some SPI debug output
2016-08-13 08:31:37 -06:00
Gregory Nutt
42202c6365
STM32 and STM32L4: Enabling DMA loses other bits in CR2
2016-08-13 08:01:41 -06:00
Gregory Nutt
efc9f674d2
Trivial changes to comments and spacing
2016-08-13 07:50:54 -06:00
Alan Carvalho de Assis
805cb5c752
STM32F3 SPI: Fix a typo
2016-08-13 07:23:48 -06:00
Gregory Nutt
da5563c0e7
STM32: Add conditional logic for STM32F37xx
2016-08-13 06:43:13 -06:00
Gregory Nutt
10f90a1738
STM32 F3: Fix more SPI issues
2016-08-12 19:00:34 -06:00
Gregory Nutt
3383a25c38
Some logic missing from last commit
2016-08-12 18:40:25 -06:00
Gregory Nutt
afb02b56d4
STM32F3 SPI: Fix the number of bit setting for the F3. It works differently than for other parts.
2016-08-12 18:32:37 -06:00
Gregory Nutt
046acf6b54
Add a simulated oneshot lowerhalf driver
2016-08-12 13:14:03 -06:00
Gregory Nutt
b4e8876b09
Correct some spacing
2016-08-12 12:41:49 -06:00
Gregory Nutt
82b86cdcf3
oneshot interface: max_delay method should return time in a standard struct timespec form.
2016-08-12 11:33:10 -06:00
Gregory Nutt
89135c55e4
drivers/timer: Add an upper-half, oneshot timer character driver.
2016-08-12 10:40:07 -06:00
Gregory Nutt
1965e25da4
STM32L4: Add oneshot lower half driver.
2016-08-11 17:14:41 -06:00
Gregory Nutt
fa6866b046
SAMA5: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver.
2016-08-11 16:47:17 -06:00
Gregory Nutt
d0ce5b1d1e
Cosmetic changes to comments and function prototypes
2016-08-11 15:15:37 -06:00
Gregory Nutt
fb349508fd
STM32 oneshot lower-half: Missed some data initialization.
2016-08-11 14:57:17 -06:00
Gregory Nutt
eb3a565153
STM32: Add oneshot lower half to build system. Fix some build problems.
2016-08-11 14:53:39 -06:00
Gregory Nutt
1bb93021df
STM32: Add a experimental oneshot, lower-half driver for STM32
2016-08-11 14:07:43 -06:00
Gregory Nutt
accbccd78a
Merged in mlyszczek/nuttx/stm32f1connline_pllfix (pull request #111 )
...
Fix bad pllmul values for stm32f1xx connectivity line.
2016-08-11 06:44:19 -06:00
Michał Łyszczek
81df56086a
Fix bad pllmul values for stm32f1xx connectivity line.
...
stm32f1xx connectivity line supports only x4, x5, x6, x7, x8, x9 and x6.5 values
2016-08-11 10:49:57 +02:00
Gregory Nutt
fdcf0f7e5f
Correct some comments
2016-08-09 15:15:21 -06:00
Gregory Nutt
b5b7a21bb6
Make reference count a uin16_t and save a couple of bytes.
2016-08-09 13:54:57 -06:00