Commit Graph

1364 Commits

Author SHA1 Message Date
Gregory Nutt
d87b54099a Eliminate a warning. 2018-01-31 17:54:20 -06:00
Gregory Nutt
8191640320 sched/task: Correct a compile error introduced with last big set of changes. 2018-01-31 16:17:23 -06:00
Gregory Nutt
50ca32e254 Squashed commit of the following:
sched/:  Convert legitimate uses of task_create() to nxtask_create().  Review handling of returned values from all uses of kthread_create() (as well as nxtask_create()).
    graphics/:  Review return values for all calls to kthread_start() because it no longer returns an errno.
    drivers/:  threads started by drivers should be kernel threads, not user tasks.  Review return values for all calls to kthread_start() because it no longer returns an errno.
    configs/:  threads started by board bringup logic should be kernel threads, not user tasksi (part 2 of 2).
    sched/task:  Add nxtask_create().  Kthread_create() and nxtask_create() are internal OS functions and should not modify the errno variable.  configs/:  threads started by board bringup logic should be kernel threads, not user tasks.
2018-01-31 16:11:54 -06:00
Gregory Nutt
da50646bcf sched/wdog: wd_start() is an internal OS function and should not set the errno value. Reviewed and updated every call to wd_start() to verify if return value is used and if so if the errno value is accessed. 2018-01-31 10:09:14 -06:00
Masayuki Ishikawa
d295f11a3a SMP: Introduce a new global IRQ clearing logic and tasklist protection.
The previous implementation of clearing global IRQ in sched_addreadytorun()
and sched_removereadytorun() was done too early. As a result, nxsem_post()
would have a chance to enter the critical section even nxsem_wait() is
still not in blocked state. This patch moves clearing global IRQ controls
from sched_addreadytorun() and sched_removereadytorun() to sched_resumescheduler()
to ensure that nxsem_post() can enter the critical section correctly.

For this change, sched_resumescheduler.c is always necessary for SMP configuration.
In addition, by this change, task_exit() had to be modified so that it calls
sched_resumescheduler() because it calls sched_removescheduler() inside the
function, otherwise it will cause a deadlock.

However, I encountered another DEBUGASSERT() in sched_cpu_select() during
HTTP streaming aging test on lc823450-xgevk. Actually sched_cpu_select()
accesses the g_assignedtasks which might be changed by another CPU. Similarly,
other tasklists might be modified simultaneously if both CPUs are executing
scheduling logic. To avoid this, I introduced tasklist protetion APIs.

With these changes, SMP kernel stability has been much improved.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-31 15:35:36 +09:00
Gregory Nutt
3521aaf944 Squashed commit of the following:
binfmt/, configs/, grahics/, libc/, mm/, net/, sched/:  OS references to the errno variable should always use the set_errno(), get_errno() macros
    arch/arm/src/stm32 and stm32f7:  Architecture-specific code is not permitted to modify the errno variable.  drivers/ and libc/:  OS references to the errno variable should always use the set_errno(), get_errno() macros
2018-01-30 17:57:36 -06:00
Gregory Nutt
82982f7972 sched/: Fix several inappropriate accesses to get_errno() that were missed in previous changes (some going back to nuttx-.23). Add new nxsched_setscheduler() and nxsched_getaffinity() which are equivalent to their counterparts without the nx on front. These versions do not modify the errno value. Changed all calls within the OS to use these newer versions of the functions. 2018-01-30 16:16:41 -06:00
Gregory Nutt
170a50c690 Squashed commit of the following:
sched/sched:  Correct some build issues introduced by last set of changes.
    sched/sched:  Add new internal OS function nxsched_setaffinity() that is identical to sched_isetaffinity() except that it does not modify the errno value.  All usage of sched_setaffinity() within the OS is replaced with nxsched_setaffinity().
    sched/sched:  Internal functions sched_reprioritize() and sched_setpriority() no longer movidify the errno value.  Also renamed to nxsched_reprioritize() and sched_setpriority().
    sched/sched:  Add new internal OS function nxsched_getscheduler() that is identical to sched_getscheduler() except that it does not modify the errno value.  All usage of sched_getscheduler() within the OS is replaced with nxsched_getscheduler().
    sched/sched:  Add new internal OS function nxsched_setparam() that is identical to sched_setparam() except that it does not modify the errno value.  All usage of sched_setparam() within the OS is replaced with nxsched_setparam().
    sched/sched:  Add new internal OS function nxsched_getparam() that is identical to sched_getparam() except that it does not modify the errno value (actually, the previous value erroneously neglected to set the errno value to begin with, but this fixes both issues).  All usage of sched_getparam() within the OS is replaced with nxsched_getparam().
2018-01-30 11:08:18 -06:00
Gregory Nutt
12e3e47d3c Update comments, mostly spelling errors. 2018-01-27 09:37:46 -06:00
Gregory Nutt
bcffeae4fd Update README and some comments 2018-01-20 12:59:56 -06:00
Gregory Nutt
82cc0ead67 sched/sched: Fix some priority inheritance related issues noted during review of logic. Also add some REVISIT comments for some issues noted in the design. 2018-01-20 07:44:35 -06:00
Gregory Nutt
be3c2d1e36 Change ASSERT(false) to DEBUGPANIC(). 2018-01-19 09:07:19 -06:00
Gregory Nutt
f012fe96cb sched/sched/sched_sporadic.c: fix compiler error when priority inheritance is enabled. Noted by eunb.song@samsung.com 2018-01-19 08:54:29 -06:00
Masayuki Ishikawa
99b944fb6e sched/semaphore: Add ASSERT(false) in nxsem_post() if no waiting task is found.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-19 22:17:58 +09:00
Masayuki Ishikawa
ab3fa89023 SMP: Introduce spin_lock_wo_note() and spin_unlock_wo_note()
These APIs are used in sched_note.c to protect instumentation data.
The deffrence between these APIs to exsiting spin_lock() and spin_unlock()
is that they do not perform insturumentation to avoid recursive call
when SCHED_INSTRUMENTATION_SPINLOCKS=y.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-17 13:29:42 +09:00
Gregory Nutt
e238c8b090 sched/clock/clock_systimer.c: Change the way that the 64-bit time is sampled. Previously, we disabled interrupts before sampling the 64-bit timer since the uint64_t access is not atomic on most CPUs. However, disabling (local) interrupts does not work in the SMP case. In that case, the timer interrupt will be running on only one of the CPUs; disabling interrupts on a different CPU will provide no protection from timer rollover. To work around this, logic was added that samples 64-bit timer is sampled twice and if 32-bit rollover was detected between samples, then loops until there is no rollover. 2018-01-15 11:05:45 -06:00
Masayuki Ishikawa
0ecef4dbcb clock_systimer: Replace critical section APIs with spinlock APIs. (64bit only)
If SMP=n or SMP=y && SPINLOCK_IRQ=n, this works in the same way as before.
If SMP=y && SPINLOCK_IRQ=y, performance will be improved.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-15 15:08:11 +09:00
Gregory Nutt
134bac3810 arch/arm/src/lpc54xx: Add configuration logic to the empty SPI driver. Still missing all data tranfer logic. 2018-01-13 15:38:55 -06:00
Gregory Nutt
fdf4e40b6a configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations. 2018-01-13 08:34:58 -06:00
Gregory Nutt
0080225473 sched/irq: Add a configuration option to show interrupt information via a procfs file. 2018-01-12 18:26:46 -06:00
Gregory Nutt
9f80e4ccf1 sched/: Various fixes for typos, improved parameter verification. 2018-01-12 18:26:45 -06:00
Gregory Nutt
7d131fe711 Update TODO list 2018-01-03 08:32:57 -06:00
Gregory Nutt
b2adb4917f arch/arm/src/lpc54xx: Add register level debug output for Ethernet testing. Fixed a few start up problems. Still hangs on start-up, however. 2017-12-31 11:11:57 -06:00
Masayuki Ishikawa
e1f71f988b sched/semaphore/spinlock.c: Add memory barrier operations in spin_unlock()
In ARM document regarding memory barrires, SP_DMB() must be issued
before changing a spinlock state to SP_UNLOCKED. However, we found
that SP_DSB() is also needed to ensure that spin_unlock() works
correctly for network streaming aging test.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-12-21 17:40:08 +09:00
Masayuki Ishikawa
27d4bb43e6 Merged in masayuki2009/nuttx.nuttx/lc823450_smp_test (pull request #557)
sched/sched: Remove DEBUGASSERT() in sched_mergepending()

Because this DEBUGASSERT() assumes that while loop executes only once.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-18 12:09:06 +00:00
Masayuki Ishikawa
6150299f54 Merged in masayuki2009/nuttx.nuttx/irq_spinlock (pull request #550)
SMP: Introduce spin_lock_irqsave() and spin_unlock_irqrestore()

These APIs are simplified version of enter_critical_section() and
leave_critical_section() to protect data (e.g. registers) in SMP mode.
By using these APIs inside drivers, performace will be improved.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-07 19:39:04 +00:00
Juha Niskanen
e8ee632378 sched/task/task_exithook.c: Clear atexit() function pointer before calling it. On most archs, up_assert() calls exit() so without this change, if atexit() function triggers an assertion we are in endless loop. 2017-11-30 06:41:57 -06:00
Masayuki Ishikawa
5acd26c88f sched/semaphore/spinlock.c: Disable local interrupts in spin_setbit() and spin_clrbit() in order to avoid a deadlock condition. 2017-11-23 06:55:53 -06:00
Gregory Nutt
b9fa3e167e Changes from review of clock_nanosleep(): Misplaced right bracket, but return value in one failure case. 2017-11-11 18:01:28 -06:00
Gregory Nutt
35ee844590 sched/signal/sig_nanosleep.c and libc/time/lib_nanosleep.c: Implement clock_nanosleep(). nanosleep() is now reduced to a libc wrapper around clock_nanosleep(). 2017-11-11 17:44:59 -06:00
Juha Niskanen
cc7af2b0d0 procfs: Fix uptime being close to maximum 32-bit value in certain config 2017-11-10 09:01:39 -06:00
Gregory Nutt
93f7cd2d53 sched/sched/sched_cpuselect.c: For SMP, In order to find the cpu with the lowest priority thread, we have to remember the already found lowest priority. Noted by Anonymous in Issue #75 2017-11-06 13:33:46 -06:00
Masayuki Ishikawa
09d4874509 Merged in masayuki2009/nuttx.nuttx/lc823450 (pull request #524)
Fix DEBUGASSERT() issues with nxhello on lc823450-xgevk

* sched/task: Remove DEBUGASSERT in task_exitstatus() and task_groupexit()

* graphics: Change DEBUGASSERT condition in nx_runinstance()

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-10-31 16:53:00 +00:00
Jussi Kivilinna
8eaa587c98 sched: move POSIX thread specific data from pthread TCB to common TCB structure. This change allows using pthread_getspecific/pthread_setspecific from main thread. Patch also enables using pthread data with config option CONFIG_DISABLE_PTHREAD=y. 2017-10-25 07:06:42 -06:00
Gregory Nutt
5b385f4d4d kthread_create(): Rename kernel_thread() to kthread_create() for better naming consistency with task_create() and kthread_delete(). 2017-10-16 11:38:00 -06:00
Gregory Nutt
b1a41b7620 task_delete(): Do not permit user applications to delete kernel threads. 2017-10-16 09:07:27 -06:00
Gregory Nutt
3c3c712887 nxsig_timedwait: Add logic to suppress the wait if there is a pending cancellation. 2017-10-12 09:53:17 -06:00
Gregory Nutt
fd58bfd9c0 sched/signal: Add logic to wake up a thread that is waiting on a signal if it is canceled. 2017-10-12 08:55:19 -06:00
Gregory Nutt
3cd41b0408 sched/task: task_exithook.c fails to link if signals are disabled because was unconditionally trying to send the SIGCHLD signal to the parent in certain configurations. Noted by Jeongchan Kim. 2017-10-11 10:43:30 -06:00
Gregory Nutt
eb79a575f6 Fix a few places where there was a semicolon following the 'if' condition, makeing the following logic unconditional. 2017-10-10 14:24:13 -06:00
Gregory Nutt
e11e3b2607 Squashed commit of the following:
Change all calls to mq_receive() and mq_timedreceive() in the OS to calls to nxmq_receive() and nxmq_timedreceive(), making appropriate changes for differences in return values.

    sched/mqueue:  Add nxmq_receive() and mxmq_timedreceive() which are functionally equivalent to the standard mq_receive and mq_timedreceive() except that (1) they do not create cancellation points, and (2) the do not modify the application's errno variable.
2017-10-10 09:57:40 -06:00
Gregory Nutt
fca07be1df Squashed commit of the following:
Change all calls to mq_send() and mq_timedsend() in the OS to calls to nxmq_send() and nxmq_timedsend(), making appropriate changes for differences in return values.

    sched/mqueue:  Add internal function nxmq_send() and nxmq_timedsend() that are equivalent to mq_send() and mq_timedsend() except that they do not create cancellation points and do to not modify the errno variable.
2017-10-10 08:44:12 -06:00
Gregory Nutt
9b61cc6b25 task: Add new cancellation point interface, check_cancellation_point(). 2017-10-09 09:43:04 -06:00
Gregory Nutt
e7c52bac60 Squashed commit of the following:
sched/mqueue:  Rename all private static functions for use the nxmq_ vs. mq_ naming.

    sched/mqueue:  Rename all OS internal functions declared in sched/mqueue/mqueue.h to begin with nxmq_ vs. mq_.  The mq_ prefix is reserved for standard application interfaces.
2017-10-09 09:06:46 -06:00
Gregory Nutt
a857cc04e4 Fix some build problems after recent separation of internal OS from application interfaces. The build problem only occurs in the PROTECTED and KERNEL builds where separate libraries are built for the applications and for use within the OS. In these cases, the correct interfaces must be used. This commit fixes a few of these, so I can get through build testing, but there are many more that need fixin'. 2017-10-08 08:13:47 -06:00
Gregory Nutt
d633c9bf8c Squashed commit of the following:
Replace all calls to sigprocmask() in the OS proper with calls to nxsig_procmask().

    sched/signal:  Add internal OS interface nxsig_procmask().  This internal interface is equivalent to the standard sigprocmask() used by applications except that it does not modify the errno value.  Also fixes a problem in that the original sigprocmask() was not setting the errno.
2017-10-07 12:16:10 -06:00
Gregory Nutt
4810499d3a Squashed commit of the following:
Replace all calls to sigqueue() in the OS proper with calls to nxsig_queue() to avoid accessing the errno variable.

    sched/signal:  Add nxsig_queue() which is functionally equivalent to sigqueue() except that it does not modify the errno variable.
2017-10-07 10:57:09 -06:00
Gregory Nutt
a20e4e7eef Eliminate a warning introduced with last commit. 2017-10-07 08:51:31 -06:00
Gregory Nutt
9e25d89223 Squashed commit of the following:
Replace all usage kill() in the OS proper with nxsig_kill().

    sched/signal:  Add nxsig_kill() which is functionally equivalent to kill() except that it does not modify the errno variable.
2017-10-07 08:22:18 -06:00
Gregory Nutt
936df1bcb5 Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep().
Squashed commit of the following:

    Change all calls to usleep() in the OS proper to calls to nxsig_usleep()

    sched/signal:  Add a new OS internal function nxsig_usleep() that is functionally equivalent to usleep() but does not cause a cancellaption point and does not modify the errno variable.

    sched/signal:  Add a new OS internal function nxsig_sleep() that is functionally equivalent to sleep() but does not cause a cancellaption point.
2017-10-06 10:15:01 -06:00
Gregory Nutt
fdd0dcc0b6 This commit adds internal versions of the signal interfaces:
sigtimedwait() -> nxsig_timedwait()
  sigwaitinfo()  -> nxsig_waitinfo()
  nanosleep()    -> nxsig_nanosleep()

The internal OS versions differ from the standard application interfaces in that:

  - They do not create cancellation points, and
  - they do not modify the application's errno variable

Squashed commit of the following:

    sched/signal:  Replace all usage of sigwaitinfo(), sigtimedwait(), and nanosleep() with the OS internal counterparts nxsig_waitinfo(), nxsig_timedwait(), and nxsig_nanosleep().

    sched/signal:  Add nxsig_nanosleep().  This is an internal OS version of nanosleep().  It differs in that it does not set the errno varaiable and does not create a cancellation point.

    sched/signal:  Add nxsig_timedwait() and nxsig_waitinfo().  These are internal OS versions of sigtimedwait() and sigwaitinfo().  They differ in that they do not set the errno varaiable and they do not create cancellation points.
2017-10-06 08:28:20 -06:00
Gregory Nutt
21c97b16cf Revert "sem_wait.c edited online with Bitbucket. Fix some correct but useless code."
What was I thinking?  I missed that litle minus sign and the possibility that the errno might be some positive non-zero value.

This reverts commit 43880878e4.
2017-10-05 16:01:01 -06:00
Gregory Nutt
43880878e4 sem_wait.c edited online with Bitbucket. Fix some correct but useless code. 2017-10-05 21:55:24 +00:00
Gregory Nutt
8198ba6a6d This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_
This is analogous to similar renaming that was done previously for semaphores.

Squashed commit of the following:

    sched/signal:  Fix a few compile warnings introduced by naming changes.

    sched/signal:  Rename all private, internal signl functions to use the nxsig_ prefix.

    sched/signal:  Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces.

    sched/signal:  Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 13:25:25 -06:00
Gregory Nutt
7cc63f90d9 sched/semaphore: sem_trywait() modifies the errno value and, hence, should not be used within the OS. Use nxsem_trywait() instead. 2017-10-05 07:59:06 -06:00
Gregory Nutt
29b5b3667f sched/semaphore: sem_timedwait() is a cancellation point and, hence, cannot be called from within the OS. Created nxsem_timedwait() that is equivalent but does not modify the errno and does not cause cancellation. All calls to sem_timedwait() change to calls to nxsem_timedwait() in the OS. 2017-10-05 07:24:54 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following:
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following:
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following:
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Gregory Nutt
374f1bd46c binfmt: Don't schedule starthook if there are no constructors. 2017-10-02 14:04:50 -06:00
Bruno Herrera
24767a0c66 Fixes for problems found by Coverity in the nuttx repository:
net/socket/recvfrom.c: Check fromlen integrity before using it.

    net/socket/net_sockets.c: Always check for valid psock before using.

    net/tcp/tcp_send_unbuffered.c:  Avoid using psock beforing checking its integrity.

    sched/timer/timer_create.c: Fix watchdog resource leak if cannot allocate a new timer.
2017-09-25 07:17:09 -06:00
Gregory Nutt
d33857002a sched/env_dup.c: Fix an error in the duplication of the child tasks environment in the special case where the parent's environment was created, but then all of the variables were unset. In that case, there is still an allocation in place but the size of the allocation is zero. This case was not being handled correctly when a child task attempts to create its environment and inherit the zero-size partent environment. Noted by Anthony Merlino. 2017-09-18 19:02:54 -06:00
Gregory Nutt
9eebd4b0f4 sched/waitpid.c: Eliminate a warning detected by GCC 6 2017-09-15 13:04:25 -06:00
Gregory Nutt
808238c871 Update some comments. 2017-09-11 14:27:02 -06:00
Gregory Nutt
7fbceacb46 Mark an untested driver as EXPERIMENTAL in its Kconfig; Update some comments. 2017-09-11 09:35:39 -06:00
Boris Astardzhiev
087a0cf2c7 waitpid(): Corrects two problems when CONFIG_SCHED_HAVE_PARENT+CONFIG_SCHED_CHILD_STATUS are enabled: (1) Was erroring out if the waited for task had already exited, and (2) was not freeing resources when a wait was completed. 2017-09-04 17:10:37 -06:00
Gregory Nutt
4993b0cb66 Work queue: In a recent change for a problem noted by Pascal Speck, it was noted (again by Pascal Speck) that the cancellation of existing work and replacement with new work must be atomic. Thanks, Pascal. 2017-08-31 07:43:47 -06:00
Gregory Nutt
92f44c5607 Networking: Move net/inet/net_monitor.c to net/tcp/tcp_monitor.c in preparation for design change to fix monitoring of duplicated sockets. 2017-08-29 08:40:13 -06:00
Gregory Nutt
bbf4d5048a work_queue() must cancel existing work prior to queuing new work, otherwise the work queue can become corrupted. Problem noted by Pascal Speck. 2017-08-28 07:46:48 -06:00
Arjun Hary
b274a97840 Miscellaneous fixes from astyle tool. 2017-08-14 17:19:27 -06:00
Gregory Nutt
6579078287 Eliminate another warning. 2017-08-12 11:24:11 -06:00
Gregory Nutt
baf4c0d011 Minor change to last PR: errno should not be modified if no error occurred. 2017-08-07 06:33:53 -06:00
Masayuki Ishikawa
4530a72379 sched/: Fix return value in sched_setaffinity() 2017-08-07 15:00:31 +09:00
Gregory Nutt
6b6d7ce9b9 sig_timedwait: Pending signal structure used after it has been releasd. From anonymous Bitbucket Issue 59. 2017-07-27 12:32:47 -06:00
Gregory Nutt
031fbfc6bc sched/: Remove dangling space at the end of lines. 2017-06-28 13:33:04 -06:00
Gregory Nutt
5e8037390c Fix problems in last commit noted by Jeongchan Kim: last change returned -EINVAL vs EINVAL; Treat the case where the mutex is already unlocked just like the case where the mutex is held by another thread -- return EPERM. 2017-06-22 06:26:00 -06:00
Gregory Nutt
0c3aef9591 Trivial typo fix 2017-06-21 06:48:13 -06:00
Gregory Nutt
6618336a39 pthread_mutex_unlock(): Missing check for the case where pthread_mutex_lock() is called when the mutex is not locked. In that case, it would increment the underlying semaphore avove 1. This is the fix for a problem noted by initialkjc@yahoo.com. 2017-06-21 06:40:09 -06:00
Gregory Nutt
2d4ba3ee3f IEEE 802.15.4 MAC: Add list management and prioritization logic that will permit the MAC layer to support bound multiple clients. 2017-06-18 11:00:47 -06:00
Gregory Nutt
2245dddaf9 Break up some long lines 2017-06-14 13:42:56 -06:00
Gregory Nutt
23a6ff5846 pthreads: Move pthread_barrier_init, pthread_barrier_destroy, and pthread_barrier_wait from sched/pthreads to libc/pthreads. This just coordinate other OS interface calls but are not a fundamental OS interfaces and, hence, do not belong within the OS. 2017-06-14 07:59:54 -06:00
Gregory Nutt
ae168bffa0 pthreads: Move pthread_cond_init and pthread_cond_destory from sched/pthreads to libc/pthreads. This just coordinate other OS interface calls but are not a fundamental OS interfaces and, hence, do not belong within the OS. 2017-06-14 07:48:45 -06:00
Gregory Nutt
557fd6504f pthreads: Move pthread_once from sched/pthreads to libc/pthreads. pthread_once just coordinates other OS interface calls but is not a fundamental OS interface and, hence, does not belong within the OS. 2017-06-14 07:31:10 -06:00
Gregory Nutt
8ae5450268 pthreads: Move pthread_yield from sched/pthreads to libc/pthreads. it is a simple wrapper for sched_yield and does not belong within the OS. 2017-06-14 07:31:10 -06:00
Gregory Nutt
0fe9c2f3f9 pthread mutex: Remove bogus DEBUGASSERT. Problem noted by Jussi Kivilinna 2017-06-01 06:28:23 -06:00
Gregory Nutt
90dda9357e pthread robust mutexes: Fix memmory trashing problem: the main task may also use mutexes; need to check thread type before accessing pthread-specific mutex data structures. Problem noted by Jussi Kivilinna. 2017-05-31 10:55:37 -06:00
Gregory Nutt
a8708424c2 pthread_trylock: Fixes a problem in pthread_trylock() noted by initialkjc@yahoo.com. When CONFIG_PTHREAD_MUTEX_UNSAFE=y, the special return value EAGAIN was not being detected due to differences in reporting of returned values. 2017-05-29 07:05:06 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
ba12817f9c Upate some comments 2017-05-11 13:15:31 -06:00
EunBong Song
03bd3688bc pthread: Fix compilation error on pthread_cond_wait when CONFIG_CANCELLATION_POINTS and CONFIG_PTHREAD_MUTEX_UNSAFE are enabled. 2017-05-02 07:14:04 -06:00
Jussi Kivilinna
e835803166 yslog: use monotonic clock for timestamp when available 2017-04-26 10:38:15 -06:00
Gregory Nutt
d5207efb5a Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
Jussi Kivilinna
33ddaa0b10 clock: add testing for 32-bit overflow of 64-bit system timer 2017-04-21 08:55:07 -06:00
Jussi Kivilinna
c57d49f420 clock: Add new type ssystime_t for relative 64-bit ticks, change ticks<->time conversion functions to use ssystime_t 2017-04-21 08:51:31 -06:00
Jussi Kivilinna
325ba1a803 clock: add clock_resynchronize and use subseconds RTC
Add clock_resynchronize for better synchronization of CLOCK_REALTIME and CLOCK_MONOTONIC to match RTC after resume from low-power state.

Add up_rtc_getdatetime_with_subseconds under CONFIG_ARCH_HAVE_RTC_SUBSECONDS to allow initializing (and resynchronizing) system clock with subseconds accuracy RTC.
2017-04-21 08:45:57 -06:00
Nobutaka Toyoshima
150036eb8b sched: Fix tg_flags check with GROUP_FLAG_NOCLDWAIT
Jira: PDFW15IS-208
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-04-14 14:50:44 +09:00
Juha Niskanen (Haltian)
b4747286b1 Add logic to disable cancellation points within the OS. This is useful when an internal OS function that is NOT a cancellation point calls an OS function which is a cancellation point. In that case, irrecoverable states may occur if the cancellation is within the OS. 2017-04-11 11:03:25 -06:00
Gregory Nutt
c08ba10d32 include/: Add some definitions needed by apps/wireless/wapi 2017-04-10 14:56:23 -06:00
Gregory Nutt
c36bf090f0 pthread: Minor logic fix in pthread_mutex_consistent. Updat some comments. 2017-04-10 10:10:41 -06:00
Gregory Nutt
948332ca34 pthreads: Backed most of last pthread changes. Found the 'real' root poblem. A one like error in pthread_mutex.c. 2017-04-10 09:51:03 -06:00
Gregory Nutt
b51b72b2db pthreads: Re-order some operations so that mutexes are placed in the inconsistent state BEFORE the clean-up callbacks are called. 2017-04-10 08:11:16 -06:00
Jussi Kivilinna
dffb8a67e3 Add entropy pool and strong random number generator
Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output.

Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 07:38:37 -06:00
Gregory Nutt
eb344d7260 Fix an assertion noted by Jussi Kivilinna.
This was a consequence of the recent robust mutex changes.  If robust mutexes are selected, then each mutex that a thread takes is retained in a list in threads TCB.  If the thread exits and that list is not empty, then we know that the thread exitted while holding mutexes.  And, in that case, each will be marked as inconsistent and the any waiter for the thread is awakened.

For the case of pthread_mutex_trywait(), the mutex was not being added to the list!  while not usually a fatal error, this was caught by an assertion when pthread_mutex_unlock() was called:  It tried to remove the mutex from the TCB list and it was not there when, of course, it shoule be.

The fix was to add pthread_mutex_trytake() which does sem_trywait() and if successful, does correctly add the mutext to the TCB list.  This should eliminated the assertion.
2017-03-29 07:50:40 -06:00
Gregory Nutt
941360bf12 Correct some spacing 2017-03-27 10:49:41 -06:00
Gregory Nutt
b07d3fc305 Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES 2017-03-27 09:08:14 -06:00
Gregory Nutt
f2f798cb29 pthread mutexes: Finish logic to support configuration mutex robustness. 2017-03-27 08:50:45 -06:00
Gregory Nutt
666208cf23 pthread mutexes: Add option to support both unsafe and robust mutexes via pthread_mutexattr_get/setrobust(). 2017-03-26 18:37:24 -06:00
Gregory Nutt
8b3c554e45 pthreads: Add a configuration option to disable robust mutexes and revert to the traditional unsafe mutexes. 2017-03-26 17:37:28 -06:00
Gregory Nutt
86ab384d77 Forget to add some files in previous commits 2017-03-26 15:46:19 -06:00
Gregory Nutt
8b23c16b90 pthreads: pthread_mutex_consistent() needs to clear flags. 2017-03-26 14:44:57 -06:00
Gregory Nutt
34c5e1c18f Minor cleanup from recent changes. 2017-03-26 14:04:07 -06:00
Gregory Nutt
5a69453e16 pthreads: Add some assertions. 2017-03-26 13:54:43 -06:00
Gregory Nutt
fe03ef02c4 when pthread exits or is cancelled, mutexes held by thread are marked inconsistent and the highest priority thread waiting for the mutex is awakened. 2017-03-26 13:37:05 -06:00
Gregory Nutt
6e623ce06f pthreads: Partial implementation of final part of robust mutexes: Keep list of all mutexes held by a thread in a list in the TCB. 2017-03-26 12:46:57 -06:00
Gregory Nutt
2c37d369ab pthread: Fix return value of pthread_give/takesemaphore(). Add option to pthread_takesemaphore to ignore EINTR or not. 2017-03-26 11:22:17 -06:00
Gregory Nutt
363403fb1f pthreads: Add more robustness characteristics: pthread_mutex_lock() and trylock() will now return EOWNERDEAD if the mutex is locked by a thread that no longer exists. Add pthread_mutex_consistent() to recover from this situation. 2017-03-26 10:35:23 -06:00
Gregory Nutt
5fb85451cb Update some comments 2017-03-22 08:08:43 -06:00
Gregory Nutt
f5a957158d Review of last PR: Setting CONFIG_SMP_NCPUS=1 should only be permitted in a debug configuration. 2017-03-22 06:29:38 -06:00
Masayuki Ishikawa
a1f0802855 Kconfig: Change the minimum SMP_NCPUS to 1 2017-03-22 10:04:37 +09:00
Gregory Nutt
6893843cc5 sched/semaphore: Fix a warning aout an unused variable when priority inheritance is enabled. 2017-03-21 13:47:56 -06:00
Gregory Nutt
e8e3c2f362 sched/semaphore: Convert strange use of DEBUGASSERT to DEBUGPANIC. 2017-03-21 13:34:17 -06:00
David Sidrane
d76157db7b sem_holder:Clean up from Review
Spelling and backward DEBUGASSERT along with one gem

  if (sem->holder[0].htcb != NULL || sem->holder[**1**].htcb != NULL)
2017-03-21 08:03:06 -10:00
David Sidrane
7601a27cee sem_holder:The logic for the list version is unchanged 2017-03-16 14:16:18 -10:00
David Sidrane
3cc2a4f7c9 sem_holder: Fixes improper restoration of base_priority
in the case of CONFIG_SEM_PREALLOCHOLDERS=0

   The call to sem_restorebaseprio_task context switches in the
   sem_foreachholder(sem, sem_restoreholderprioB, stcb); call
   prior to releasing the holder. So the running task is left
   as a holder as is the started task. Leaving both slots filled
   Thus failing to perforem the boost/or restoration on the
   correct tcb.

   This PR fixes this by releasing the running task slot prior
   to reprioritization that can lead to the context switch.
   To faclitate this, the interface to sem_restorebaseprio
   needed to take the tcb from the holder prior to the
   holder being freed. In the failure case where sched_verifytcb
   fails it added the overhead of looking up the holder.

   There is also the adfitinal thunking on the foreach to
   get from holer to holder->tcb.

   An alternate approach could be to leve the interface the same
   and allocate a holder on the stack of sem_restoreholderprioB
   copy the sem's holder to it, free it as is done in this pr
   and and then pass that address sem_restoreholderprio as the
   holder. It could then get the holder's tcb but we would
   keep the same sem_findholder in sched_verifytcb.
2017-03-15 17:12:45 -10:00
David Sidrane
55fb9645a7 Guard from pend_reprios overlow 2017-03-15 07:42:55 -10:00
David Sidrane
caf8bac7fb missing semi 2017-03-13 22:54:13 +00:00
David Sidrane
d66fd9f965 semaphore:sem_boostholderprio prevent overrun of pend_reprios
The second case rtcb->sched_priority <= htcb->sched_priority
  did not check if there is sufficient space in the pend_reprios
  array.
2017-03-13 12:34:39 -10:00
David Sidrane
3c00651cfe semaphore:sem_holder sem_findholder missing inintalization of pholder
sem_findholder would fail and code optimization coverd this up.
2017-03-13 11:56:31 -10:00
David Sidrane
4d760c5ea4 semaphore:sem_holder add DEBUGASSERT s 2017-03-13 10:46:26 -10:00
Gregory Nutt
399f306744 A few cosmetic changes 2017-03-11 08:58:42 -06:00
David Sidrane
6cc8f9100b Priority Inversion fixes:typo 2017-03-10 06:37:46 -10:00
Gregory Nutt
360539afac Priority inheritance: When CONFIG_SEM_PREALLOCHOLDERS==0, there is only a single, hard-allocated holder structure. This is problem because in sem_wait() the holder is released, but needs to remain in the holder container until sem_restorebaseprio() is called. The call to sem_restorebaseprio() must be one of the last things the sem_wait() does because it can cause the task to be suspended. If in sem_wait(), a new task gets the semaphore count then it will fail to allocate the holder and will not participate in priority inheritance. This fix is to add two hard-allocated holders in the sem_t structure: One of the old holder and one for the new holder. 2017-03-10 09:30:15 -06:00
Gregory Nutt
a93e46d00c Cosmetic 2017-03-10 08:54:50 -06:00
Gregory Nutt
c976a66f8d net/drivers/skeleton.c: Back out serialization changes of the last commit. They are not necessary in the skeleton.c example because the calls to net_lock() at the beginning of each worker function will enforce serialization. 2017-03-04 11:33:36 -06:00
Gregory Nutt
b55a98e900 Olimex-STM32-P407: Enable task names 2017-03-04 08:49:24 -06:00
Gregory Nutt
47ebe1e320 Update some comments 2017-03-03 12:48:58 -06:00
Gregory Nutt
e1218c4b4b Smaller vector tables: Add irq_mapped_t. 2017-03-03 10:20:40 -06:00
Gregory Nutt
04c9ccdd2d Update TODO list and some Kconfig comments. 2017-03-03 09:20:25 -06:00
Gregory Nutt
c2b620b4f8 Implements support for smaller interrupt tables as described at http://www.nuttx.org/doku.php?id=wiki:howtos:smallvectors . This is largely the work of Mark Schulte. However, I have made several changes to match with the Wiki document. If you like the change, thanks go to Marc. For any errors you can blame me. 2017-03-03 09:20:25 -06:00
Masayuki Ishikawa
d78113e4ad Revert "CONFIG_START_YEAR/MONTH/DAY not required if an RTC is used"
This reverts commit 4035ed8c6c.
2017-03-03 10:42:10 +09:00
Masayuki Ishikawa
54b1f5ce2a Merged in masayuki2009/nuttx.nuttx/remove_unused_variable (pull request #233)
Remove unused variable

Approved-by: Gregory Nutt
2017-03-02 12:39:32 +00:00
Gregory Nutt
094795e0ed Review parameter usage in sigtimedwait(); update some comments. 2017-03-02 06:39:05 -06:00
Masayuki Ishikawa
237e041fba Remove an unused variable when calling sigwaitinfo() 2017-03-02 13:14:00 +09:00
Masayuki Ishikawa
4043239cfc Remove an unused variable when calling sigtimedwait() 2017-03-02 13:13:53 +09:00
Gregory Nutt
02b1e1ec1a Fixes for coding standard: '*' needs to 'snuggle' with following variable name 2017-02-28 18:22:57 -06:00
Gregory Nutt
840c5935a3 Correct a typo from one of the preceding commits. 2017-02-27 11:58:20 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
4dbc0a27c6 pthread_create: g_pthreadname[] is not used if CONFIG_TASK_NAME_SIZE==0. 2017-02-26 18:15:16 -06:00
Gregory Nutt
12a4a58aa6 Update some wdog-related comments 2017-02-24 10:58:37 -06:00
Gregory Nutt
dca77fa06a sigtimedwait: When timer expires, up_unblock_task() is called. This is okay in the single CPU case because interrupts are disable in the timer interrupt handler. But it is insufficient in the SMP case. enter_ and leave_critical_section() must be called in order to manage spinlocks correctly. 2017-02-24 10:07:23 -06:00
Gregory Nutt
cb7c5f9921 Implement strings.h macros as inline functions when possible for better C++ compatibility. 2017-02-22 10:20:58 -06:00
Gregory Nutt
4f5879f998 C library: Add ffs(). Add strings.h. Move strcasecmp, strncasecmp, bzero, bcmp, and bcopy to where they belong in strings.h.h, not string.h. bzero, bcmp, and bcopy are legacy functions; the contemporary counterparts should be used instead. 2017-02-16 16:10:09 -06:00
Gregory Nutt
74189d84e2 Cancellation points: Fix some backward logic in conditional compilation. 2017-02-02 06:42:41 -06:00
Gregory Nutt
e0f199e42e Missing semicolon in previous commit 2017-01-31 14:18:20 -06:00
Gregory Nutt
154873a3d0 Timer logic: Add private function prototypes to eliminate a warning; Functions should not be inline because the may recurse. 2017-01-31 13:45:22 -06:00
Gregory Nutt
e30b2617e3 Shared Libs: Implement module based shared libraries for the PROTECTED mode build 2017-01-29 13:03:53 -06:00
Gregory Nutt
2c45f482b1 Module names are not needed in libc/modlib when the module library is used only for shared library support. 2017-01-29 12:23:24 -06:00
Gregory Nutt
86bdd0a4c7 Modules: Move last of many C files from sched/module to libc/modlib 2017-01-29 11:54:54 -06:00
Gregory Nutt
6da66fb5c8 Modules: Move next five of many C files from sched/module to libc/modlib 2017-01-29 11:17:29 -06:00
Gregory Nutt
5e94dd22bb Modules: Move first five of many C files from sched/module to libc/modlib 2017-01-29 10:05:15 -06:00
Gregory Nutt
00e46b5966 Move gnu-elf.ld from sched/module to libc/modlib. Update paths in Make.defs files to account for new location of file 2017-01-29 09:03:01 -06:00
Gregory Nutt
2717e781f0 libc/modlib: Add build a configuration logic for a shared module library. 2017-01-29 08:55:27 -06:00
Gregory Nutt
b79ca9dcdd Modules: Move sched/module/module.h to include/nuttx/lib/modlib.h 2017-01-29 08:24:42 -06:00
Gregory Nutt
68a7110195 sched/modules: Add support for dependencies between modules. 2017-01-27 11:43:27 -06:00
Gregory Nutt
6a4880f415 SMP: Fix timer related issues: Round robin and sporadic scheduling were only being performed for tasks running on the CPU that processes the system timer interrupt. Similary, CPU load measurements were only be processed for running on the CPU that receives the sampling interrupt. 2017-01-23 12:14:01 -06:00
Gregory Nutt
4574a1ca42 Modules: Extend the module interface so that we can access symbols exported by the module. 2017-01-22 14:26:22 -06:00
Gregory Nutt
d90e66a024 Kernel Modules: Module initializer may now return a symbol table (not yet used for anything) 2017-01-22 11:37:49 -06:00
Gregory Nutt
1823c78663 Update some comments 2017-01-22 10:17:51 -06:00
Gregory Nutt
686041f8e7 CPU load: Correct computation of the nominal period to use when the source is a oneshot timer. 2017-01-22 07:12:22 -06:00
rg
1e38884088 Fix a compile error: in sched_cpuload.c:Line136, the variables ts and secs are not defined if CONFIG_CPULOAD_ONESHOT_ENTROPY = 0. However, these variables are used regardless of CONFIG_CPULOAD_ONESHOT_ENTROPY at lines~180:onwards. 2017-01-22 06:48:11 -06:00
Gregory Nutt
edd9186540 ELF: Move ARMv7-A and ARMv7-R versions of ELF relocation logic to libc/machine 2017-01-21 14:40:26 -06:00
Gregory Nutt
fba247b119 Update some comments 2017-01-13 16:32:09 -06:00
Gregory Nutt
99bb2dda5d i.MX6: Corrects behavior of last SMP patch with i.MX6 2017-01-13 12:29:57 -06:00
Gregory Nutt
a51b5b7e17 Add REVISIT to comments. 2017-01-13 09:40:17 -06:00
Gregory Nutt
37e6e6a52e Eliminate a warning 2017-01-13 06:56:13 -06:00
Gregory Nutt
9ce4022096 SMP: Fix an error in critical section logic when performing a context switch from an interrupt handler. The g_cpu_irqset bit was not being set for the CPU so other CPUs did not know about the critical section. 2017-01-13 06:48:10 -06:00
Masayuki Ishikawa
acbfa47f70 sched_note: Fix spinlock instrumentation 2017-01-12 08:04:28 -06:00
Gregory Nutt
d5b1ca14e2 Update README and some comments. 2017-01-02 13:54:07 -06:00
Gregory Nutt
04557a1198 Eliminate a warning 2016-12-31 14:47:32 -06:00
Gregory Nutt
8f716a386b SMP: Use irq_cpu_locked() in sched_removereadytorun() and sched_setpriority() 2016-12-29 10:40:58 -06:00
Gregory Nutt
af92a67fc5 SMP: Use irq_cpu_locked() in sched_mergepending() 2016-12-29 08:53:31 -06:00
Gregory Nutt
e7d2b9f0e8 SMP: Move sharable function to common file as irq_cpu_locked(). Use irq_cpu_locked() in sched_unlock() 2016-12-29 08:17:10 -06:00
Gregory Nutt
96394f339e SMP: Fix a gap where we may try to make modifications to the task lists without being in a critical sections. That permits concurrent access to the tasks lists and many subtle problems. This fix just remains in the critical section throughout the operation (and possible until the task is restore in the event of a context switch). Makes a big difference in stability 2016-12-28 13:58:24 -06:00
Gregory Nutt
88da65ad8a sched_cpulocked: Avoid use of spinlock. That has been reported to cause a deadlock. 2016-12-28 12:10:17 -06:00
Gregory Nutt
72490f84e6 SMP: Make checks for CPU lock set more robust. There are certains conditions early in initialization on during interrupt handling where things need to be done a little differently. 2016-12-28 10:21:05 -06:00
Gregory Nutt
cfb876263a SMP: There were certain conditions that we must avoid by preventing releasing the pending tasks while withn a critical section. But this logic was incomplete; there was no logic to prevent other CPUs from adding new, running tasks while on CPU is in a critical section.
This commit corrects this.  This is matching logic in sched_addreadytorun to avoid starting new tasks within the critical section (unless the CPU is the holder of the lock).  The holder of the IRQ lock must be permitted to do whatever it needs to do.
2016-12-27 08:49:07 -06:00
Gregory Nutt
e0f3f4ae19 Update some coments 2016-12-26 16:12:27 -06:00
Gregory Nutt
849a5dc2a9 SMP: Enforce this rule: Tasks which are normally restored when sched_unlock() is called must remain pending (1) if we are in a critical section, i.e., g_cpu_irqlock is locked , or (2) other CPUs still have pre-emption disabled, i.e., g_cpu_schedlock is locked. In those cases, the release of the pending tasks must be deferred until those conditions are met. 2016-12-26 08:15:02 -06:00
Gregory Nutt
d45a81d643 Revert "SMP: Fix a error introduced in 36b676eea6 and fully decouple disabling of pre-emption from critical sections."
This reverts commit 9aedf1bdec.
2016-12-26 07:48:22 -06:00
Gregory Nutt
9aedf1bdec SMP: Fix a error introduced in 36b676eea6 and fully decouple disabling of pre-emption from critical sections. 2016-12-25 06:54:43 -06:00
Gregory Nutt
efb86382c3 SMP: Back out deferred IRQ locking. This was accidentally merged into master and it looks like it is going to be more work than I thought to get it working again. Changes will go to the irqlock branch. 2016-12-24 19:53:37 -06:00
Gregory Nutt
3af6b2a9a6 Update a comment 2016-12-24 19:01:07 -06:00
Gregory Nutt
f55bad863b SMP: Fix logic error in last change: Deferred restoration of IRQ lock only applies if the context switch was on this CPU. 2016-12-24 18:52:58 -06:00
Gregory Nutt
36b676eea6 SMP sched_unlock: Should merging depend on g_cpu_irqlock or not? Let's at least be consistent. And don't use irqcount; use g_cpu_irqlock. 2016-12-24 13:45:11 -06:00
Gregory Nutt
d75a7643d0 Fix a trivial typo 2016-12-23 13:01:20 -06:00
Gregory Nutt
e6fff09ef8 Implement deferred IRQ locking. So far only form ARMv7-M. 2016-12-23 07:55:41 -06:00
Gregory Nutt
d648f9c8b4 Add task_testcancel() 2016-12-10 16:34:14 -06:00
Gregory Nutt
f132960789 Add task_setcanceltype() 2016-12-10 16:06:14 -06:00
Gregory Nutt
5fb207eb36 Add task_setcancelstate() 2016-12-10 15:16:46 -06:00
Gregory Nutt
698597a838 task_delete() now obeys all cancellation point semantics. 2016-12-10 14:39:19 -06:00