Commit Graph

32602 Commits

Author SHA1 Message Date
Michael Jung
fe44948ea4 arch/arm/src/lpc17xx/lpc17_usbdev.c: Fix loss of RX initiatives. USB bulk endpoints are double buffered on LPC17xx MCUs. This means that up to two packets might be received on an OUT endpoint that can not be handled immediately if the receive request queue is empty. Thus, rxpending must be a counter not a boolean flag. 2018-05-20 12:42:30 -06:00
Gregory Nutt
cce5d017b4 arch/arm/src/imxrt: Fix some eDMA interrupt controls. 2018-05-20 12:21:36 -06:00
Gregory Nutt
20f1597fa5 arch/arm/src/imxrt: IOMUXC logic now uses peripheral clock helpers (I think it was enabling the wrong clocks anyway). Minor updates to eDMA logic. 2018-05-20 12:02:50 -06:00
Gregory Nutt
9c9c0eb4d5 arch/arm/src/imxrt: Add eDMA interrupt decode logic. 2018-05-20 10:59:36 -06:00
Gregory Nutt
87df439909 arch/arm/src/imxrt: Add eDMA initialization logic. 2018-05-20 10:34:27 -06:00
Gregory Nutt
0f6aeb7cff arch/arm/src/imxrt: Centralilze and standardize control of peripheral clocking. Add logic to initialize the DMAMUX. 2018-05-20 10:03:45 -06:00
Gregory Nutt
6529a5666e Update README file 2018-05-19 17:32:56 -06:00
Gregory Nutt
9da3d4a2a9 drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories. 2018-05-19 16:46:21 -06:00
Alan Carvalho de Assis
cc1d68bd92 arch/arm/src/stm32: Include needed headers to get stm32_i2s.c compiled
configs/stm32f4discovery/include/board.h: Add SPI DMA pins definitions to get CS43L22 audio DAC working
configs/stm32f4discovery/audio: Add board configuration for CS43L22 audio example
configs/stm32f4discovery:  Update README
2018-05-19 16:12:21 -06:00
Gregory Nutt
2366c13f87 include/nuttx/fb.h: Fix a type _BEND -> _BLEND 2018-05-18 13:36:58 -06:00
Gregory Nutt
23ff4b4206 configs/stm32l1discovery: Fix a typo introduced in the Make.defs file. 2018-05-18 11:46:22 -06:00
Gregory Nutt
10ec45ae9e configs/stm32l1discovery: Add support for the STM32L152RCT6 version. 2018-05-18 11:34:55 -06:00
Gregory Nutt
c84342d357 include/nuttx/video/fb.h: No, I was right the first time. sys/types.h is needed in some inclusion contexts. 2018-05-18 08:21:08 -06:00
Gregory Nutt
d813c867aa include/nuttx/fb: Last change was wrong. It was not a missing header. It was just a dumb typo. 2018-05-18 08:03:48 -06:00
Gregory Nutt
eaa1570fba include/video/fb.h: Use of size_t requires inclusion of sys/types.h 2018-05-18 07:50:10 -06:00
Gregory Nutt
8b0b7636a8 include/nuttx/video/fb.h: Make type used for overlay number consistent; Use standardized types (size_t and fb_coord_t) whenever possible. 2018-05-18 07:24:36 -06:00
Dmitriy Linikov
76f0e68812 arch/arm/src/stm32: Added Vbat measurement to adc driver for STM32F20xx and STM32F4xxx.
As with the MCU temperature and VREFINT measurement, this patch requires user to enable the corresponding channel first. For Vbat channel the ioctl cmd is IO_ENABLE_DISABLE_VBAT_CH, and its arg should be a pointer to bool which must be true to enable and false to disable the Vbat channel.

Moreover, since Vbat input contains a built-in voltage divider, it is highly suggested to disable Vbat input channel after measurement is done in order to prevent battery drain through the divider.
2018-05-18 06:45:46 -06:00
Gregory Nutt
af8b1abf73 Merged fboverlay into master 2018-05-17 16:11:09 -06:00
Gregory Nutt
fe364ba1f4 arch/arm/src/imxrt: A little more eDMA logic. Slow progress. 2018-05-17 14:23:58 -06:00
Gregory Nutt
1acc765156 arch/arm/src/imxrt: A little more DMA-related logic. Still no significant logic in place. 2018-05-17 09:48:45 -06:00
Gregory Nutt
a186383f2a Recent changes to UDP in order to correct problems with UDP connection mode introduced a new bug: The 'to' address passed to sendto() must now be NULL in connection mode. But there are errors because there was one place where the 'to' address was still being used.
This commit adds logic to first check for UDP connection mode.  If the UDP socket is connected, then the NULL 'to' address is ignored and saved connection address is used instead.
2018-05-17 07:46:09 -06:00
Anthony Merlino
5e2d7c227d net/sixlowpan: TCP send should have PSH and ACK flags set when sending. This matches the standard network (Ethernet) TCP send logic. 2018-05-17 06:45:46 -06:00
Gregory Nutt
f91c3666a1 arch/arm/src/imxrt: A little more DMA logic. Still far from complete. 2018-05-16 16:20:30 -06:00
Gregory Nutt
ea8d78c9c5 arch/arm/src/imxrt: Add framework for eDMA support. Initial port is a rip off from the SAMA5Dx and is little more than the framework for the DMA support. 2018-05-16 14:28:22 -06:00
Gregory Nutt
9bb4a80838 arch/arm/src/imxrt/chip: Remove un-necessary TCD structure. 2018-05-16 12:35:10 -06:00
Gregory Nutt
3b355d52f2 arch/arm/src/imxrt/chip: Add more eDMA register definitions. Still missing TCD definitions. 2018-05-16 12:01:05 -06:00
Gregory Nutt
8f0b87a2d9 arch/arm/src/imxrt/chip: Add more eDMA register definitions. Still missing bit-field definitions. 2018-05-16 09:49:48 -06:00
Jake Choy
4638e3f4c7 rch/arm/src/imxrt/chip: Add Ethernet pin properties. 2018-05-16 07:50:24 -06:00
Gregory Nutt
79ab957982 arch/arm/src/imxrt/chip: Add DMA MUX register definition header file. 2018-05-16 07:25:37 -06:00
Gregory Nutt
d519358fd9 configs/nucleo-l452re/src: board.h must always be the last header file included. 2018-05-15 17:17:20 -06:00
William Douglas
c708f66aea Squashed commit of the following:
commit 7fd1f0d78546fa0315f4077b779efdd884e5bd53
Author: William Douglas <william@rocklandscientific.com>
Date:   Tue May 15 13:19:31 2018 -0700

    Add support for the second SDMMC device.

    The second SDMMC device was already supported but
    the clock was never enabled.  This fixes that.
2018-05-15 17:08:20 -06:00
Gregory Nutt
2b2f3bf263 arch/arm/src/imxrt/chip: Add DMA channel assignments. 2018-05-15 14:44:33 -06:00
Anthony Merlino
19ebdb4ef9 Merged in antmerlino/nuttx/sixlowpan_hc06_fix (pull request #644)
sixlowpan: Preserve big-endian (network order) when uncompressing address.

This change is the counterpart to another recent endianness fix that occurred on compression of the ip address.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-15 17:32:40 +00:00
Jake Choy
034ab467e6 arch/arm/src/imxrt: Corrects some IOMUX controls. 2018-05-15 10:16:57 -06:00
Gregory Nutt
c82724d462 arch/arm/src/imxrt: Add missing support for the Cortex-M7 caches; configs/imxrt1050-evk: Enable I- and D-Caches in the nsh configuration. Calibrate the delay loop. Add support for the on-board LED. 2018-05-15 10:05:16 -06:00
Gregory Nutt
c681519720 arch/arm/src/imxrt/imxrt_serial.c: Fix some interrupt instabilities; must be in a critical section when modifying serial interrupts. configs/imxrt1050-evk/nsh/defconfig: Use the BASEPRI register to enable/disable interrupts; enable the PROCFS file system. 2018-05-15 07:50:19 -06:00
Juha Niskanen
0275c8e9c7 configs/nucleo-l452re: Add buttons example 2018-05-15 07:50:19 -06:00
Gregory Nutt
2c94eb1188 board.h edited online with Bitbucket 2018-05-15 04:24:26 +00:00
Gregory Nutt
2fa738e08c arch/arm/src/imxrt: Various fixes from attempt at initial bringup. 2018-05-14 16:07:34 -06:00
Gregory Nutt
3a34b29f76 arch/arm/src/imxrt/chip: Add pin multiplexing header files. 2018-05-14 13:29:53 -06:00
Anthony Merlino
2de86b3e40 Merged in antmerlino/nuttx/photon_rgb_fix (pull request #643)
configs/photon: Fixes build error introduced in recent rgbled changes.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-14 18:25:53 +00:00
Anthony Merlino
2ed01b3c27 Merged in antmerlino/nuttx/photon-rgbled-fix (pull request #642)
Photon rgbled fix

* configs/photon: Simplifies RGB led start-up logic.

* configs/photon: RGB led on Photon is common anode. CONFIGS_RGBLED_INVERT is now enabled

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-14 17:58:23 +00:00
Anthony Merlino
addf7f1a4c Merged in antmerlino/nuttx/multichan_rgbled_fix (pull request #641)
rgbled: Fixes led issues caused by uninitialized memory with CONFIG_RGBLED_MULTICHAN.

The uninitialized pwm_info_s struct caused a rogue channel to be started causing errros in the pwm driver

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-05-14 17:57:03 +00:00
Gregory Nutt
4e8e726ca3 net/udp: Trivial correct in comments due to copy-paste. 2018-05-14 06:36:59 -06:00
Gregory Nutt
8befa072a5 include/sys/resource.h: Trivial typo fix. 2018-05-13 12:12:49 -06:00
Gregory Nutt
3208e4835e include/sys: Add resource.h 2018-05-13 10:59:49 -06:00
Gregory Nutt
3ee61fb890 net/udp: Associated with last commit. Make sure that the new connection flag is cleared when a new UDP connection structure is allocated. 2018-05-13 10:03:55 -06:00
Gregory Nutt
fb8cf9373c net/udp: Resolve race condition in connection-less UDP sockets with read-ahead buffering.
In connection-mode UDP sockets, a remote address is retained in the UDP connection structure.  This determines both there send() will send the packets and which packets recv() will accept.

This same mechanism is used for connection-less UDP sendto:  A temporary remote address is written into the connection structure to support the sendto() operation.  That address persists until the next recvfrom() when it is reset to accept any address.

When UDP read-ahead buffering is enabled, however, that means that the old, invalid remote address can be left in the connection structure for some time.  This can cause read-ahead buffer to fail, dropping UDP packets.

Shortening the time between when he remote address is reset (i.e., immediately after the sendto() completes) is not a solution, that does not eliminate the race condition; in only makes it smaller.

With this change, a flag was added to the connection structure to indicate if the UDP socket is in connection mode or if it is connection-less.  This change effects only UDP receive operations:  The remote address in the UDP connection is always ignored if the UDP socket is not in connection-mode.

No for connection-mode sockets, that remote address behaves as before.  But for connection-less sockets, it is only used by sendto().
2018-05-13 09:57:34 -06:00
Gregory Nutt
aec56484ab arch/arm/src/kinetis + SDHC configs: Make Kinetis SDHC pullups work the same as the STM32 SDIO pullups 2018-05-12 17:12:58 -06:00
Alan Carvalho de Assis
df3d9dd357 arch/arm/src/stm32: Add internal pull-up option for SDIO pins (also picks up an unrelated change to a README.txt file) 2018-05-12 17:08:32 -06:00