Gregory Nutt
|
e3258a3b1f
|
Support the the TC3200 from Jim Ewing
|
2014-08-26 15:13:57 -06:00 |
|
Gregory Nutt
|
032ff50313
|
Add up_addrenv_coherent which will be called before address environment switches
|
2014-08-26 14:53:19 -06:00 |
|
Gregory Nutt
|
d6a4eb6266
|
up_coherent_dcache should do nothing the the length is zero
|
2014-08-26 14:51:53 -06:00 |
|
Gregory Nutt
|
e8094292e3
|
Rename up_addrenv_assign() to up_addrenv_clone() and generalize its arguments so that can be used for other purposes
|
2014-08-26 12:16:05 -06:00 |
|
Gregory Nutt
|
cb8e081dba
|
Mostly cosmetic use of uintptr_t to hold addresses instead of uint32_t
|
2014-08-26 10:44:10 -06:00 |
|
Gregory Nutt
|
b1066775a2
|
Fix confusion about what is a page of data and what is a page of L2 page table; restructure functions to reduce duplicated logic
|
2014-08-26 10:41:43 -06:00 |
|
Gregory Nutt
|
45d0b2c5fb
|
Add lots of debug output
|
2014-08-26 07:54:43 -06:00 |
|
Gregory Nutt
|
b3473bfa26
|
Cortex-A address environment: Fix some section mapping and address increments
|
2014-08-26 06:33:26 -06:00 |
|
Gregory Nutt
|
a593729cb2
|
ARMv7-A: Use of write back might be unpredictable
|
2014-08-25 16:34:22 -06:00 |
|
Gregory Nutt
|
cfa8174fe4
|
Bugfixes.. still integrating SAMA5 ELF with address environment
|
2014-08-25 15:27:58 -06:00 |
|
Gregory Nutt
|
9857f09baf
|
SAMA5 ELF configuration with address environments finally builds without errors
|
2014-08-25 13:59:02 -06:00 |
|
Gregory Nutt
|
699a54a022
|
Misc changed to get the SAMA5 ELF configuration with address environments working
|
2014-08-25 13:28:13 -06:00 |
|
Gregory Nutt
|
8907616478
|
Cortex-A/SAMA5 address environment support is code complete (untested)
|
2014-08-25 11:18:32 -06:00 |
|
Gregory Nutt
|
2566ba7b1d
|
Change naming of ELF interfaces from arch_ to up_ for consistency
|
2014-08-25 06:47:14 -06:00 |
|
Gregory Nutt
|
1f5813a763
|
After cached related fix, the ELF example is now functional
|
2014-08-24 14:12:45 -06:00 |
|
Gregory Nutt
|
839e206a4a
|
Modify ADDRENV Kconfigs. Z180 does not need all of the virtual address settings that the ARM does
|
2014-08-24 12:54:37 -06:00 |
|
Gregory Nutt
|
dde84a0a20
|
addrenv interface changes: up_addrenv_create() may need to create .text and .bss/.data separately because of differing access privileges (read/execute vs read/write). And, as a consequence, up_addrenv_vaddr() needs to be split into up_addrenv_vtext(0 and up_addrenv_vdata().
|
2014-08-24 11:54:14 -06:00 |
|
Gregory Nutt
|
95c79c675c
|
Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment
|
2014-08-24 09:57:53 -06:00 |
|
Gregory Nutt
|
66abb71c57
|
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
|
2014-08-24 06:42:11 -06:00 |
|
Gregory Nutt
|
41196945d6
|
ARMv7-A: Add skeleton environment and build support for process address environments
|
2014-08-23 18:59:24 -06:00 |
|
Gregory Nutt
|
29406c0d20
|
Add option to select 64-bit build platform
|
2014-08-22 18:21:32 -06:00 |
|
Gregory Nutt
|
01566dd322
|
STM32 serial: MAke uart_devs[] const. From Freddie Chopin
|
2014-08-22 16:20:52 -06:00 |
|
Gregory Nutt
|
52b3735310
|
Recent STM32 UART change: Wasn't that logic backward? Shouldn't that have been disable the USART if (1) we don't have than many USARTs OR (2) we don't have that particular USART -- not AND.
|
2014-08-22 16:16:23 -06:00 |
|
Gregory Nutt
|
f58ba70547
|
A few fixes for compilation errors due to recent address environment fixes
|
2014-08-22 15:55:00 -06:00 |
|
Gregory Nutt
|
d989807e76
|
uintptr_t should be 64-bits under Cygwin64
|
2014-08-22 15:18:55 -06:00 |
|
Gregory Nutt
|
d40553b538
|
An address environment is the property of a task group, not of a thread
|
2014-08-22 12:32:34 -06:00 |
|
Gregory Nutt
|
b01d3e396e
|
STM32 F401: Only 3 USARTS, but need to set STM32_NUSARTS to six because they are not numbered sequentially
|
2014-08-22 09:02:58 -06:00 |
|
Gregory Nutt
|
033de28cfa
|
STM32 F401: Correct support for USART6 on this chip. From Freddie Chopin
|
2014-08-22 06:49:16 -06:00 |
|
Gregory Nutt
|
2bc16b2ba5
|
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
|
2014-08-21 11:16:55 -06:00 |
|
Gregory Nutt
|
96e1bf0ec2
|
NSH link management now works! The last fix was to the Ethernet drivers: They cannot disable clocking to the Ethernet blok on ifdown. Otherwise, we cannot communicate with the PHY
|
2014-08-17 17:54:46 -06:00 |
|
Gregory Nutt
|
754541a381
|
Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires
|
2014-08-17 16:51:56 -06:00 |
|
Gregory Nutt
|
2fab4eaa5a
|
In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts)
|
2014-08-17 13:03:18 -06:00 |
|
Gregory Nutt
|
e0ef5a08bc
|
For all SAM Ethernet, need to enable management interface before reading PHY regisers in IOCTL
|
2014-08-17 11:09:54 -06:00 |
|
Gregory Nutt
|
2edcca009c
|
SAM3/4 Ethernet: Clone ioctl support from the SAMA5
|
2014-08-17 06:54:37 -06:00 |
|
Gregory Nutt
|
4c90c03028
|
Use the device name assigned by the registration process, not our best guess
|
2014-08-16 15:14:39 -06:00 |
|
Gregory Nutt
|
8f6f564971
|
More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic
|
2014-08-16 15:04:09 -06:00 |
|
Gregory Nutt
|
329ae8024d
|
Implement all network ioctls, including the new ioctl to setup PHY event notifications.
|
2014-08-16 14:09:14 -06:00 |
|
Gregory Nutt
|
85070e057e
|
Modified to support the change to the network ioctl signature changes. Also add support for new ioctl to setup PHY event notifications.
|
2014-08-16 14:08:58 -06:00 |
|
Gregory Nutt
|
74735bb495
|
Fix conditional compilation error
|
2014-08-12 10:00:58 -06:00 |
|
Gregory Nutt
|
511d7bb38a
|
Adds support for localtime. From Max Neklyudov
|
2014-08-12 06:18:22 -06:00 |
|
Gregory Nutt
|
1474a56014
|
Fix a computation error in the fix for the last computational error
|
2014-08-11 12:07:49 -06:00 |
|
Gregory Nutt
|
304b3b547c
|
Correct time conversion, 1000000 not 1000 to convert seconds to microseconds.
|
2014-08-11 11:14:10 -06:00 |
|
Gregory Nutt
|
6e7cb4be58
|
Comment out reassessment of timer in the middle of context switches. Need to revisit
|
2014-08-11 07:05:47 -06:00 |
|
Gregory Nutt
|
bb1213ab89
|
SAMA5 Tickless: Corrects some logic errors with timer/counter frequency
|
2014-08-10 19:04:18 -06:00 |
|
Gregory Nutt
|
bffc875d2e
|
Cosmetic
|
2014-08-10 16:09:45 -06:00 |
|
Gregory Nutt
|
a2ee73235d
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
77d49f50e0
|
Don't try to return time remaining if the timespec pointer is NULL
|
2014-08-10 11:39:16 -06:00 |
|
Gregory Nutt
|
9a4e1f6fdd
|
Move TC debug options to one file
|
2014-08-10 11:38:44 -06:00 |
|
Gregory Nutt
|
33965a21e3
|
Update comments
|
2014-08-10 11:38:08 -06:00 |
|
Gregory Nutt
|
42b1bcdf33
|
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
|
2014-08-10 10:47:38 -06:00 |
|
Gregory Nutt
|
9cb0b680ac
|
SAMA5 Timer/counter repair: Missing sem_post() caused a hang
|
2014-08-09 18:34:52 -06:00 |
|
Gregory Nutt
|
c61ec08ee8
|
SAMA5: Use the one-shot and free-running timers to implement tickless OS support for SAMA5
|
2014-08-09 17:14:51 -06:00 |
|
Gregory Nutt
|
19ee65ac3e
|
SAMA5 free-running timer: Add support for a free-running timer wrapper around the low-level timer/counter logic.
|
2014-08-09 16:43:48 -06:00 |
|
Gregory Nutt
|
f9601b6801
|
SAMA5 oneshot: Some clean-up and correction to the initial implementation
|
2014-08-09 16:42:04 -06:00 |
|
Gregory Nutt
|
e4981b09d9
|
SAMA5 timer/counter: Add support for a one-shot timer wrapper around the low-level timer/counter logic. This also involved several changes that rippled into the ADC driver (untested).
|
2014-08-09 15:27:55 -06:00 |
|
Gregory Nutt
|
c7662e3f92
|
SAMA5 T/C: Can now handle non-constant BOARD_MCK_FREQUENCY. Also now supports methods to attach user interrupt handlers
|
2014-08-09 10:30:45 -06:00 |
|
Gregory Nutt
|
5d143578b0
|
Fix errors in documentation and comments related to the Tickless OS. From Vijay Kumar
|
2014-08-09 06:41:38 -06:00 |
|
Gregory Nutt
|
6455f60c60
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
Gregory Nutt
|
4dc151097e
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
Gregory Nutt
|
c98ece6bec
|
Move task control files from sched/ to sched/task
|
2014-08-08 16:44:08 -06:00 |
|
Gregory Nutt
|
1c99d53bb1
|
Move clock functions from sched/ to sched/clock
|
2014-08-08 14:43:02 -06:00 |
|
Gregory Nutt
|
192f82f380
|
Move interrupt dispatch logic from sched/ to sched/irq
|
2014-08-08 14:31:15 -06:00 |
|
Gregory Nutt
|
39183d37b8
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
Gregory Nutt
|
8b2a8fceba
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
f140e112e0
|
Implements the tickless OS
|
2014-08-07 11:39:16 -06:00 |
|
Gregory Nutt
|
c275ebef35
|
Add support for a simulated interval timer support verification of the tickless OS.
|
2014-08-06 18:29:29 -06:00 |
|
Gregory Nutt
|
595ec296fb
|
Don't build in sched_processtimer.c if CONFIG_SCHED_TICKLESS is selected.
|
2014-08-06 18:27:10 -06:00 |
|
Gregory Nutt
|
94afad9b70
|
if CONFIG_SCHED_TICKLESS is defined, then the global variable g_system_timer does not exist
|
2014-08-06 18:26:16 -06:00 |
|
Gregory Nutt
|
594083d870
|
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
|
2014-08-06 16:26:01 -06:00 |
|
Gregory Nutt
|
d4a29fcf7e
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
553a16fac5
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
1fc8f2b06d
|
SAMA5 SSC: Verify that the requested bit width is supported. Correct some alignment tests that depend upon the data bit width.
|
2014-08-02 14:26:49 -06:00 |
|
Gregory Nutt
|
715cf207ea
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
5e92347d60
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
d68a6059e0
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
c2c2921901
|
SAMA5D SSC: Needs to account for data offset in audio buffer.
|
2014-07-31 19:14:24 -06:00 |
|
Gregory Nutt
|
513329fd24
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
ffcc0b8da3
|
SAMA5: Changes needed for a clean SAMA5D3 build after all of the recent SAMA5D4 changes.
|
2014-07-31 11:09:56 -06:00 |
|
Gregory Nutt
|
c0c4cda763
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
611ea42dbf
|
SAMA5D HSMCI: Fix a problem on card insertion/removal callback handling. Interrupts were being disable so that the callbacks occurred with interrupts disabled. This resulted in loss of some interrupts and some not-so-good behaviors. The solution is to perform all callbacks on the work thread unconditionally (2014-7-29).
|
2014-07-30 10:19:41 -06:00 |
|
Gregory Nutt
|
059812c872
|
SAMA5D HSMCI: Add method to do RX transfer without DMA. The 8-byte SCR transfer was failing silently with the DMA transfer, leaving the SD card in single bit mode
|
2014-07-29 21:13:28 -06:00 |
|
Gregory Nutt
|
8bbbc5b255
|
Cosmetic changes to comments
|
2014-07-29 07:17:01 -06:00 |
|
Gregory Nutt
|
e053158f95
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
29ea8ab0e4
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
Gregory Nutt
|
42a975af74
|
Fixes to last SAMA5 PMIC checkin
|
2014-07-28 17:09:37 -06:00 |
|
Gregory Nutt
|
99927e918d
|
LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit.
|
2014-07-28 07:23:49 -06:00 |
|
Gregory Nutt
|
dd4be66f1c
|
ARM: Move L2 cache initialization to much later in the sequence
|
2014-07-27 10:03:33 -06:00 |
|
Gregory Nutt
|
b57d2182ab
|
ARMv7-A L2 Cache currently depends on EXPERIMENTAL because it does not yet work properly
|
2014-07-26 18:48:54 -06:00 |
|
Gregory Nutt
|
6f5280d284
|
ARMv7 L2 Cache: Minor bugfixes/improvements
|
2014-07-26 18:48:26 -06:00 |
|
Gregory Nutt
|
ee59870325
|
Enables cache early in boot-up sequence
|
2014-07-26 18:48:00 -06:00 |
|
Gregory Nutt
|
4e146d2ec2
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
873788bf5a
|
New cache.h file. Renames cp15_XYZ_cache() to arch_XYZ_cache() and addes L2 cache support if L2 cache is enabled
|
2014-07-26 18:46:52 -06:00 |
|
Gregory Nutt
|
2eb526253b
|
Rename ARMv7-A cache.h to cp15_cache.h. Things will be broken on this commit until I get the new cache.h in place.
|
2014-07-26 16:54:19 -06:00 |
|
Gregory Nutt
|
6d9ca195ee
|
arch/arm/src/armv7-a/arm_l2cc_pl310.c, l2cc.h, l2cc_pl310.h, Kconfig: Add initiali support for the ARM L2CC-PL310 L2 cache.
|
2014-07-26 16:50:08 -06:00 |
|
Gregory Nutt
|
fcbf89c6f6
|
ARMv7-A: L2CC PL310 address filtering is an optional feature
|
2014-07-25 19:46:09 -06:00 |
|
Gregory Nutt
|
a007fa3f5e
|
ARMv7-A: Add missing L2CC PL310 bit definitions
|
2014-07-25 19:41:35 -06:00 |
|
Gregory Nutt
|
e74f37445b
|
rch/arm/armv7-a/l2cc_pl310.h: Move arch/arm/sama5/chip/sam_l2cc.h to arch/arm/armv7-a/l2cc_pl310.h. Adjust the two corresponding Kconfig files as well.
|
2014-07-25 17:25:17 -06:00 |
|
Gregory Nutt
|
2ec0ab3b5e
|
3rd time is a charm. Max is right, the initial priority setting should be NVIC_SYSH_PRIORITY_MIN
|
2014-07-24 16:51:07 -06:00 |
|
Gregory Nutt
|
1366ce0a02
|
Oops, should have been NVIC_SYSH_PRIORITY_DEFAULT
|
2014-07-24 16:42:15 -06:00 |
|
Gregory Nutt
|
a3d20b2fa1
|
LPC17 Ethernet: Added option to use the kernel worker thread to do most of the workload with CONFIG_NET_WORKER_THREAD option in Kconfig. Eliminated a problem with PHY DP83848C : it doesn't need a specific initialization on mbed. Critical bufix: From time to time (after some hours) the Ethernet receiver would lose one receive interrupt and the IP stack never recover because there is no receive watchdog as the transmit watchdog. From Max
|
2014-07-24 16:39:18 -06:00 |
|