In case of high TX network traffic, netdriver_loop() that reads data from netdev
was invoked via up_idle() only after high TX network traffic had stopped.
That resulted in massive delay and drop of TCP ACK packets and
any other packets from netdev (tun/tap device).
For example, task is blocked by nxsem_wait(sem1), use nxsem_wait(sem2)
in signal handler, and take sem2 successfully, after exit from signal
handler to task, nxsem_wait(sem1) returns OK, but the correct result
should be -EINTR.
Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
we have many different hostfs implementation now, so it's better
to select the implementation explicitly, just like what we have
done for arm(FS_HOSTFS vs. ARM_SEMIHOSTING_HOSTFS).
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
When use poweroff command,host_abort will be called,but may be make __stack_chk_fail irq, and host_abort be called in PANIC(), so bring infinite loop, in turn it can not exit SIM.
Signed-off-by: buyuer <dingddding@163.com>
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found that sim_cpu_start() calls pthread_attr_init()
which locates not on the host OS but on the NuttX
- This commit fixes this issue by adding the symbol names
to nuttx-names.in
Impact:
- sim in SMP mode
- NOTE: stack usage for CPU1/2/3 IDLE is still incorrect on macOS
Testing:
- Tested with ostest on Ubuntu 18.04 (x86_64) and macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since this macro isn't check from host side after:
commit cee43ce280
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Jul 16 02:23:59 2021 +0800
arch/sim: Initialize the idle thread stack info correctly
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found the issue depends on pthread stack settings
and perhaps it might affect the host signal handling.
- This commit fixes this issue by just reverting the pthread
stack setting only for macOS.
Impact:
- sim:smp on macOS
- Stack usage for CPU1/2/3 IDLE will be incorrect
Testing:
- Tested with ostest on macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
use the same condition check in declaration and reference
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7b05316e914708fceeddac394d784ee3720a3c1b
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia54efbbca4b69706150bc4178844b316688a104e
1.Move all special process to mm_takesemaphore
2.Remove the support of recurive lock
3.Remove mm_trysemaphore function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie216a6294ab67c5d427f31b089beb15c532f08fe
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
and remove mm_sbrk and kmm_sbrk since it's wrong to expose
sbrk to other heaps except the default userspace heap.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Root casue:
when do thread exit, need add free stack operation to mm_delaylist,
but in SMP mode, CPU0 thread1 exit, at this time, CPU1 call malloc
and free mm_delaylist.
Fix:
Divide mm_delaylist for per CPU in SMP mode.
Change-Id: Ibf7d04614ea2f99fb5b506356b7346a0d94f0590
Signed-off-by: ligd <liguiding1@xiaomi.com>
since kernel component should use UTC instead local time
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf939e1ab0af8e577105f539d2553bc67b3b3d10
instead calling kmm_heapmember or umm_heapmember because:
1.The stack supplied by caller may allocate from heap too
2.It's hard to implement these two function in ASan case
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I196377822b7c4643ab4f29b7c1dc41dcd7c4dab1
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
specified the name of remote proc(rpmsg server)
Change-Id: I0086bb43727a2bbb5e68f88907b5e4608182ef9c
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
N/A
specified the name of remote proc(rpmsg server)
Change-Id: Ie270d651071e87a40a80ab489597ae18db9814f0
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
Reapply the following commit [1], which has been reverted by
the recent change [2] with no obvious reasons.
Also, add a comment block to explain the calculation.
[1]
```
commit 298c2e5e4f
Author: YAMAMOTO Takashi <yamamoto@midokura.com>
Date: Wed Jan 29 03:26:43 2020 +0900
sim: Fix stack alignment
The recent x86-64 convention requires 16-byte alignment before
(not after) calling a function.
This fixes snprintf crash I observed on macOS while saving XMM registers.
```
[2]
```
commit 2335b69120
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Mon Apr 12 23:44:08 2021 +0800
arch: Allocate the space from the beginning in up_stack_frame
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
```
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This fixes the problem that an assertion in sim build aborted NuttX
even when the assertion was generated from userspace (in which case
simpy the task needs to exit). This required moving the relevant code
into the sim blob.
Summary:
- In the previous implementation, signal handling for SMP was done
in a critical section that is not correct
- This commit fixes this issue
Impact:
- signal handling for SMP
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
add support to attach the devices via HCI TTY to Bluetooth Host
Reference:
drivers/wireless/bluetooth/bt_uart_shim.c
Signed-off-by: chao.an <anchao@xiaomi.com>
Reuse the reserved fields of hci buffer to avoid redundant packet type splitting
Change-Id: I79d70ae939111bb909a6e0981c50e401734590f2
Signed-off-by: chao.an <anchao@xiaomi.com>
nuttx.rel: In function `rpmsg_serialinit':
nuttx/arch/sim/src/sim/up_rptun.c:257: undefined reference to `uart_rpmsg_init'
collect2: error: ld returned 1 exit status
Makefile:310: recipe for target 'nuttx' failed
Change-Id: I93a20941bc07f749165dc8f012da46ddb7b02b00
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary
- This commit fixes interrupt handling for SMP
- The following are the changes
- Introduce up_copyfullstate.c
- Add enter_critical_section() to up_exit()
- Add a critical section to up_schedule_sigaction()
- Introduce pseudo timer thread to send periodic events
- UART and interval timer are now handled in the pause handler
- Apply the same SMP related code as other CPU architectures
- However, signal handling and context switching are not changed
- Also enable debug features and some tools in smp/defconfig
Imact
- SMP only
Testing
- Tested with sim:smp on ubuntu18.04 x86_64
- Tested with hello, taskset, smp, ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>