Commit Graph

965 Commits

Author SHA1 Message Date
Wail Khemir
540a3b701a Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c 2015-11-17 17:09:10 -05:00
Gregory Nutt
b28bd72a48 Standardize naming of user LEDs interface functions 2015-11-01 12:45:58 -06:00
Gregory Nutt
f56ed529e5 Remove prototypes for all user LED interfaces from board.h header files 2015-11-01 10:53:34 -06:00
Gregory Nutt
893bd9c7b5 Rename board_led_off to board_autoled_off 2015-11-01 09:10:08 -06:00
Gregory Nutt
78f19bbefb Rename board_led_on to board_autoled_on 2015-11-01 09:07:36 -06:00
Gregory Nutt
88c506d843 Rename board_led_initialize to board_autoled_initiaize 2015-11-01 09:03:01 -06:00
Gregory Nutt
d0c332b5c9 Add file missed in last commit 2015-10-18 08:03:17 +08:00
Alan Carvalho de Assis
82bc95c340 Add board config to support MAX6675 2015-10-18 07:54:21 +08:00
Alan Carvalho de Assis
f2d07ad135 STM32F4-Discvovery: Add low level support for the Zero Cross driver. From Alan Carvalho de Assis 2015-10-13 07:35:09 -06:00
Paul A. Patience
a778cb3a49 STM32F4-Discovery: Configure CAN2 GPIOs if UAVCAN uses two interfaces 2015-10-08 15:49:52 -04:00
Paul A. Patience
dd468add8a Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in stm32_boardinitialize() instead of in board_app_initialize() 2015-10-08 13:18:32 -04:00
Paul A. Patience
06a88178af Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize 2015-10-06 23:49:28 -04:00
Paul A. Patience
6a94d0e45a STM32F4-Discovery: Add SSD1351 SPI 4-wire interface 2015-10-06 19:05:32 -04:00
Gregory Nutt
fc58f7e538 Remove dangling whitespace 2015-10-04 15:28:03 -06:00
Gregory Nutt
79ef94a938 STM32F4-Discovery: Add support for the NSH network initialization thread in the netnsh configuration. Attempted to enable the networking monitor as well, but it turns out that the PHY interrupt is not supported with the STM32F4-DISBB base board 2015-09-28 10:58:47 -06:00
Gregory Nutt
9cc454ca0a Set non-zero task name sizes in several configurations 2015-09-28 08:36:18 -06:00
Gregory Nutt
9125e89e68 Add commented out path to the ARM GNU toolchain in setenv.sh files 2015-09-26 09:09:41 -06:00
Gregory Nutt
d86a9c9691 Refresh some configurations 2015-09-26 08:40:57 -06:00
pnb
508a55f6be STM32F4Discovery: Should not include STM32 internal files when building for application 2015-09-19 07:56:50 -06:00
Alan Carvalho de Assis
9d490482d8 Configure stm32f4discovery board to support MAX31855 driver 2015-09-13 15:50:02 -06:00
Paul A. Patience
272ab8c090 Fix typo 2015-09-10 21:20:53 -04:00
Gregory Nutt
ebf7fe9aae Eliminate warnings 2015-09-08 12:41:52 -06:00
Gregory Nutt
37111e6b2c Eliminate warnings 2015-09-08 10:19:34 -06:00
Paul A. Patience
55d8aee826 Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience" 2015-09-04 16:42:34 -06:00
Paul A. Patience
81268bb75c Add -Wundef warning flag 2015-09-01 13:19:57 -04:00
Alan Carvalho de Assis
04b777cb9a configs/stm32f4discovery/: Add support to BMP180 driver on STM32F4Discovery. From Alan Carvalho de Assis. 2015-07-20 07:22:01 -06:00
Gregory Nutt
75595ddfef Remove refereneces to DNSCLIENT IPv4/IPv6 2015-07-12 14:13:18 -06:00
Gregory Nutt
58f21e7621 Fix a typo in a README file 2015-07-11 08:16:07 -06:00
Gregory Nutt
6b506fd5f4 Refresh a configuration 2015-07-10 13:30:24 -06:00
Gregory Nutt
42f69ba42f Rename CONFIG_NETUTILS_DNS* to CONFIG_NETDB_DNS* to reflect the movement of the DNS server from apps/netutils to nuttx/libc/netdb 2015-07-10 12:09:58 -06:00
Gregory Nutt
dcb2b2077f Update protected build logic for all platforms that supported the protected build. This is necessary due to changes in the definition of the userspace interface 2015-07-10 08:35:36 -06:00
Gregory Nutt
47148fb4c8 Refresh configuration 2015-07-10 08:34:35 -06:00
Gregory Nutt
a5e185569d Refresh configuration 2015-07-05 09:06:57 -06:00
Gregory Nutt
f7ba1b1eeb Remove all references to the dedunct CONFIG_SYSTEM_SYSINFO configuration from all defconfig files 2015-07-04 15:19:11 -06:00
Gregory Nutt
6a9e986be9 Refresh/fix more broken configurations 2015-07-03 09:33:02 -06:00
Gregory Nutt
2b6c679d6b Refresh configuration 2015-07-03 07:49:53 -06:00
Gregory Nutt
d1ab9c2e0a Remove the configs/ directory 2015-06-29 13:12:29 -06:00
Gregory Nutt
9e99cfa4e0 Correct many bitbucket.org URLs 2015-06-28 09:14:52 -06:00
Gregory Nutt
2f9bf6b792 Correct many bitbucket.org URLs 2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307 This cleans up most of the remaining SourceForge references 2015-06-26 18:13:20 -06:00
Gregory Nutt
63eaa31da2 This cleans up most of the remaining SourceForge references 2015-06-26 18:13:20 -06:00
Gregory Nutt
e9d3b3d038 Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132 2015-06-01 14:16:18 -06:00
Gregory Nutt
6068820bf3 Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132 2015-06-01 14:16:18 -06:00
Gregory Nutt
add36cc3de Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis 2015-05-30 10:00:54 -06:00
Gregory Nutt
fce87336a4 Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis 2015-05-30 10:00:54 -06:00
Gregory Nutt
784f037690 STM32 F4 Discovery: Move up_cxxinitialize from nuttx/configs/stm32f4discovery/src to apps/platform/stm32f4discovery where it belongs. 2015-05-29 12:08:15 -06:00
Gregory Nutt
80470773ca STM32 F4 Discovery: Move up_cxxinitialize from nuttx/configs/stm32f4discovery/src to apps/platform/stm32f4discovery where it belongs. 2015-05-29 12:08:15 -06:00
Gregory Nutt
1787506332 Stm32 F4 Discovery; Refrsh ELF configuration; update README.txt 2015-05-29 11:42:40 -06:00
Gregory Nutt
578cd494fe Stm32 F4 Discovery; Refrsh ELF configuration; update README.txt 2015-05-29 11:42:40 -06:00
Gregory Nutt
4c8983bd88 Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in 2015-05-27 11:39:44 -06:00
Gregory Nutt
b94321cfb4 Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in 2015-05-27 11:39:44 -06:00
Gregory Nutt
0dbf579aa8 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
4adda9d428 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
d468285739 Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected. 2015-05-06 14:11:29 -06:00
Gregory Nutt
691d7c9819 Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected. 2015-05-06 14:11:29 -06:00
Gregory Nutt
d66eb8b23c Merge remote-tracking branch 'origin/master' into usbhub 2015-05-01 15:38:48 -06:00
Gregory Nutt
d1283484ac Merge remote-tracking branch 'origin/master' into usbhub 2015-05-01 15:38:48 -06:00
Gregory Nutt
f5d2f9f5c2 STM32F4-Discovery: Part of logic to initialize the ELF loaded in the board startup logic. From Leo aloe3132 2015-04-30 14:32:30 -06:00
Gregory Nutt
c4a337389c STM32F4-Discovery: Part of logic to initialize the ELF loaded in the board startup logic. From Leo aloe3132 2015-04-30 14:32:30 -06:00
Gregory Nutt
b2268c298b STM32F4-Discover: Initialize the ELF loaded in the board startup logic. From Leo aloe3132 2015-04-30 14:29:21 -06:00
Gregory Nutt
698f71a176 STM32F4-Discover: Initialize the ELF loaded in the board startup logic. From Leo aloe3132 2015-04-30 14:29:21 -06:00
Gregory Nutt
1d881c2d35 STM32F4-Discovery: Add another missing configuration; fix names of configurations 2015-04-30 13:02:38 -06:00
Gregory Nutt
9f34a34d8c STM32F4-Discovery: Add another missing configuration; fix names of configurations 2015-04-30 13:02:38 -06:00
Gregory Nutt
11583b8b25 STM32F4-Discover: Add missing logic to register the hub class 2015-04-30 11:27:20 -06:00
Gregory Nutt
f36b833955 STM32F4-Discover: Add missing logic to register the hub class 2015-04-30 11:27:20 -06:00
Gregory Nutt
5555e6101f STM32F4-Discovery: Add configuration option to select the size of the stack used with the usbhost waiter. Needs to be bigger when a hub is supported 2015-04-30 11:26:35 -06:00
Gregory Nutt
fc3d30f0ba STM32F4-Discovery: Add configuration option to select the size of the stack used with the usbhost waiter. Needs to be bigger when a hub is supported 2015-04-30 11:26:35 -06:00
Gregory Nutt
4585717b7f STM32 HUB: Fix more compilation errors when hub support is enabled 2015-04-30 08:00:41 -06:00
Gregory Nutt
dfa4a1f7ac STM32 HUB: Fix more compilation errors when hub support is enabled 2015-04-30 08:00:41 -06:00
Gregory Nutt
4e6b842d09 Fix some errors in initial re-verification of USB host on the STM32F4-Discovery 2015-04-30 07:28:30 -06:00
Gregory Nutt
e34ca32852 Fix some errors in initial re-verification of USB host on the STM32F4-Discovery 2015-04-30 07:28:30 -06:00
Gregory Nutt
084ba74a87 First cut, dirty conversion of EFM32, STM32 FS and HS host drivers to the new interfaces 2015-04-29 15:53:58 -06:00
Gregory Nutt
52cbeead7f First cut, dirty conversion of EFM32, STM32 FS and HS host drivers to the new interfaces 2015-04-29 15:53:58 -06:00
Gregory Nutt
119bd7fe8a USB HUB: Update all USB host connection waiter application threads to use the the new connection interface 2015-04-28 12:21:23 -06:00
Gregory Nutt
7042225a8a USB HUB: Update all USB host connection waiter application threads to use the the new connection interface 2015-04-28 12:21:23 -06:00
Gregory Nutt
91fb3c59cb USB Hub: Add USB hub header file from Kaushal Parikh 2015-04-18 11:39:26 -06:00
Gregory Nutt
98de2f5712 USB Hub: Add USB hub header file from Kaushal Parikh 2015-04-18 11:39:26 -06:00
Gregory Nutt
2cecfa1036 Fix dedbug output; used wrong macro 2015-04-16 12:37:47 -06:00
Gregory Nutt
2fe0e5624e Fix dedbug output; used wrong macro 2015-04-16 12:37:47 -06:00
Gregory Nutt
68a97a53ac Make some file section headers more consistent with standard 2015-04-08 09:15:17 -06:00
Gregory Nutt
54847a163f Make some file section headers more consistent with standard 2015-04-08 09:15:17 -06:00
Gregory Nutt
f73fdd90c9 More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize 2015-04-04 11:49:15 -06:00
Gregory Nutt
02beb0d449 More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize 2015-04-04 11:49:15 -06:00
Gregory Nutt
d90824a0fc Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/. 2015-04-01 12:37:44 -06:00
Gregory Nutt
0ec67181c9 Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/. 2015-04-01 12:37:44 -06:00
Gregory Nutt
6722e186e2 Rename pwm_devinit() to board_pwm_setup(). Add CONFIG_BOARDCTL_PWMTEST that will enable calling board_pwm_setup() from boardctl(). Replace calls to pwm_devinit() in apps/examples/pwm with calls to boardctl(). In all configurations that enable the apps/examples/pwm test, make sure that boardctl() suppoprt is properly enabled. 2015-03-31 16:59:22 -06:00
Gregory Nutt
f6e6dacb17 Rename pwm_devinit() to board_pwm_setup(). Add CONFIG_BOARDCTL_PWMTEST that will enable calling board_pwm_setup() from boardctl(). Replace calls to pwm_devinit() in apps/examples/pwm with calls to boardctl(). In all configurations that enable the apps/examples/pwm test, make sure that boardctl() suppoprt is properly enabled. 2015-03-31 16:59:22 -06:00
Gregory Nutt
afe76e9b07 Rename up_nxdrvinit() to board_graphics_setup(). Add CONFIG_BOARDCTL_GRAPHICS that will enabled calls to board_graphics_setup() from boardctrl(). In apps/ and NxWidgts/, replace all calls to up_nxdrvinit with calls to boardctl(). 2015-03-31 16:20:21 -06:00
Gregory Nutt
ded2001121 Rename up_nxdrvinit() to board_graphics_setup(). Add CONFIG_BOARDCTL_GRAPHICS that will enabled calls to board_graphics_setup() from boardctrl(). In apps/ and NxWidgts/, replace all calls to up_nxdrvinit with calls to boardctl(). 2015-03-31 16:20:21 -06:00
Gregory Nutt
15b90de919 NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation 2015-03-31 12:14:16 -06:00
Gregory Nutt
4a8e0e2359 NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation 2015-03-31 12:14:16 -06:00
Gregory Nutt
103a17d4f1 Rename arch_nshinitialize() to board_app_initialize() 2015-03-31 10:21:31 -06:00
Gregory Nutt
9c0441e2da Rename arch_nshinitialize() to board_app_initialize() 2015-03-31 10:21:31 -06:00
Gregory Nutt
245f506676 All kernel 1st pass builds: Rename files for better conformance to naming conventions 2015-03-21 15:01:32 -06:00
Gregory Nutt
95c2b350b3 All kernel 1st pass builds: Rename files for better conformance to naming conventions 2015-03-21 15:01:32 -06:00
Gregory Nutt
3bfb9dcd0b Refresh configuration 2015-03-05 11:25:10 -06:00
Gregory Nutt
9bbad2a56c Refresh configuration 2015-03-05 11:25:10 -06:00
Gregory Nutt
7583c94252 Move board_ prototypes from arch.h to board.h 2015-02-27 20:02:03 -06:00
Gregory Nutt
12d61531aa Move board_ prototypes from arch.h to board.h 2015-02-27 20:02:03 -06:00
Gregory Nutt
42327117a3 configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 18:49:24 -06:00
Gregory Nutt
f75184b5ac configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 18:49:24 -06:00
Gregory Nutt
d5dd1e383d Add support for RTC driver to the STM32F4-Discovery board 2015-02-15 10:11:01 -06:00
Gregory Nutt
f477c9b275 Add support for RTC driver to the STM32F4-Discovery board 2015-02-15 10:11:01 -06:00
Gregory Nutt
aaabd05bfc RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
3724a5e98e RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
e8b4f474d3 Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing). 2015-02-09 08:34:52 -06:00
Gregory Nutt
0195049165 Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing). 2015-02-09 08:34:52 -06:00
Gregory Nutt
357ee0a3f0 Update README files 2015-02-05 12:07:21 -06:00
Gregory Nutt
968e02a44c Update README files 2015-02-05 12:07:21 -06:00
Gregory Nutt
0cab41e36f Update README 2015-02-05 11:23:55 -06:00
Gregory Nutt
2d381d059c Update README 2015-02-05 11:23:55 -06:00
Gregory Nutt
07d232b84a STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
cc63543b80 STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
290e7465c3 Update configuration 2015-01-29 16:30:43 -06:00
Gregory Nutt
ebf1e121b5 Update configuration 2015-01-29 16:30:43 -06:00
Gregory Nutt
764b5075bc Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future 2015-01-14 10:51:09 -06:00
Gregory Nutt
babe9cf08e Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future 2015-01-14 10:51:09 -06:00
Gregory Nutt
db562b774a Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
c6f4fd7480 STM3210E-EVAL: Add a DJoystick driver 2014-11-28 13:31:09 -06:00
Gregory Nutt
421c81b315 STM3210E-EVAL: Add a DJoystick driver 2014-11-28 13:31:09 -06:00
Gregory Nutt
6498e1127e More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
2994448d85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
f4746a3e9e Fix BAS configuration from last change; refresh STM32 F4 NSH configuration 2014-11-24 09:12:56 -06:00
Gregory Nutt
8c05e06046 Fix BAS configuration from last change; refresh STM32 F4 NSH configuration 2014-11-24 09:12:56 -06:00
Gregory Nutt
e3920b130f changes for clean build with Ethernet+SLIP 2014-11-16 11:27:53 -06:00
Gregory Nutt
57bcb28991 changes for clean build with Ethernet+SLIP 2014-11-16 11:27:53 -06:00
Gregory Nutt
3715040386 Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files 2014-11-16 10:49:33 -06:00
Gregory Nutt
29dc5916af Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files 2014-11-16 10:49:33 -06:00
Gregory Nutt
07a74c3cfd Refresh configuration 2014-11-16 09:36:08 -06:00
Gregory Nutt
72f0145f69 Refresh configuration 2014-11-16 09:36:08 -06:00
Gregory Nutt
fa0512a766 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all configuration files 2014-11-16 08:07:16 -06:00
Gregory Nutt
307d869429 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all configuration files 2014-11-16 08:07:16 -06:00
Gregory Nutt
adb497959d STM32F4Discovery netnsh configuration needs to set MAC address 2014-11-15 08:32:12 -06:00
Gregory Nutt
240b688001 STM32F4Discovery netnsh configuration needs to set MAC address 2014-11-15 08:32:12 -06:00
Gregory Nutt
b0fa0a0b98 Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
113c7f25ba merge 2014-11-13 08:43:53 -06:00
Gregory Nutt
321d829552 merge 2014-11-13 08:43:53 -06:00
Gregory Nutt
39d1e97934 Refresh configuration 2014-11-13 08:40:11 -06:00
Gregory Nutt
9129391ab1 Refresh configuration 2014-11-13 08:40:11 -06:00
Gregory Nutt
f31dca368b Remove CONFIG_MAX_TASK_ARGS from all Kconfigs and defconfigs 2014-11-12 18:02:19 -06:00
Gregory Nutt
fcffafee30 Remove CONFIG_MAX_TASK_ARGS from all Kconfigs and defconfigs 2014-11-12 18:02:19 -06:00
Gregory Nutt
1381705258 Update README files 2014-11-11 09:36:33 -06:00
Gregory Nutt
333824c32b Update README files 2014-11-11 09:36:33 -06:00
Gregory Nutt
a66a10b891 Refresh configuration 2014-11-10 13:43:43 -06:00
Gregory Nutt
2818e905c7 Refresh configuration 2014-11-10 13:43:43 -06:00
Gregory Nutt
4c36103407 Refresh a configuration 2014-10-28 00:11:40 -06:00
Gregory Nutt
cf5e0c1b39 Refresh a configuration 2014-10-28 00:11:40 -06:00
Gregory Nutt
dd4d482fe2 Rename CONFIG_STM32_HAVE_USARTn to CONFIG_STM32_HAVE_UARTn for n-4,5,7,8 2014-10-27 11:29:43 -06:00
Gregory Nutt
0f1ba777f0 Rename CONFIG_STM32_HAVE_USARTn to CONFIG_STM32_HAVE_UARTn for n-4,5,7,8 2014-10-27 11:29:43 -06:00
Gregory Nutt
bdbe5393e1 Add README for non-existent port to the EFM32GG-STK3700; fix typos in related README files 2014-10-22 14:32:25 -06:00
Gregory Nutt
c8b4ab7383 Add README for non-existent port to the EFM32GG-STK3700; fix typos in related README files 2014-10-22 14:32:25 -06:00
Gregory Nutt
fbaa55e416 EFM32 Gecko Starter Kit: Must initialize LEDs on boot 2014-10-20 11:52:31 -06:00
Gregory Nutt
4fb5e6d05d EFM32 Gecko Starter Kit: Must initialize LEDs on boot 2014-10-20 11:52:31 -06:00
Gregory Nutt
f80182aea1 Typo 2014-10-17 08:37:59 -06:00
Gregory Nutt
dbaf8096b8 Typo 2014-10-17 08:37:59 -06:00
Gregory Nutt
ca57ef9fac Change naming of HP work queue configuration varaibles to be symmetric with LP work queue naming 2014-10-11 17:03:44 -06:00
Gregory Nutt
c9d7472d68 Change naming of HP work queue configuration varaibles to be symmetric with LP work queue naming 2014-10-11 17:03:44 -06:00
Gregory Nutt
4ad13d380f Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK 2014-10-11 15:59:40 -06:00
Gregory Nutt
b78fe7c270 Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK 2014-10-11 15:59:40 -06:00
Gregory Nutt
f1212bf8e9 Decouple the user-space work queue from the kernel space work queues 2014-10-11 15:50:22 -06:00
Gregory Nutt
9292e3d9de Decouple the user-space work queue from the kernel space work queues 2014-10-11 15:50:22 -06:00
Gregory Nutt
857d0b8e76 Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask() 2014-10-09 06:09:03 -06:00
Gregory Nutt
4efb064169 Remove non-standard, conditional syslog_enable(), instead only the required, standard setlogmask() 2014-10-09 06:09:03 -06:00
Gregory Nutt
2b77c9ceb9 Remaining files under nuttx/configs changed to use the corrected syslog interfaces 2014-10-08 15:32:00 -06:00
Gregory Nutt
27a7f8b018 Remaining files under nuttx/configs changed to use the corrected syslog interfaces 2014-10-08 15:32:00 -06:00
Gregory Nutt
0cdd0bf667 Refresh STM32F4Discovery kosest configuration file 2014-09-29 08:00:51 -06:00
Gregory Nutt
d35492e703 Refresh STM32F4Discovery kosest configuration file 2014-09-29 08:00:51 -06:00
Gregory Nutt
9041a95605 STM32F4-Discovery: Fix some backwad conditional compilation 2014-09-29 06:49:55 -06:00
Gregory Nutt
60f8a8ec86 STM32F4-Discovery: Fix some backwad conditional compilation 2014-09-29 06:49:55 -06:00
Gregory Nutt
7939ff50d9 Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
b33c2d9cef Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
4aa785a503 Rename CONFIG_EXAMPLES_NXCONSOLE to CONFIG_EXAMPLES_NXTERM; rename CONFIG_NXWM_NXCONSOLE to CONFIG_NXWM_NXTERM 2014-09-20 14:25:51 -06:00
Gregory Nutt
3d050101eb Rename CONFIG_EXAMPLES_NXCONSOLE to CONFIG_EXAMPLES_NXTERM; rename CONFIG_NXWM_NXCONSOLE to CONFIG_NXWM_NXTERM 2014-09-20 14:25:51 -06:00
Gregory Nutt
1a1ed4a112 Rename CONFIG_NXCONSOLE* to CONFIG_NXTERM* 2014-09-20 14:18:08 -06:00
Gregory Nutt
0b67b111ae Rename CONFIG_NXCONSOLE* to CONFIG_NXTERM* 2014-09-20 14:18:08 -06:00
Gregory Nutt
822208a3be Fix nsh_archinitialize return value 2014-09-20 13:36:29 -06:00
Gregory Nutt
be84c048c9 Fix nsh_archinitialize return value 2014-09-20 13:36:29 -06:00
Gregory Nutt
0e9d155c76 STM32F4Discovery: Add support for the microSD card slot on the STM32F4DIS-BB base board 2014-09-20 12:55:23 -06:00
Gregory Nutt
820a5b6dcd STM32F4Discovery: Add support for the microSD card slot on the STM32F4DIS-BB base board 2014-09-20 12:55:23 -06:00
Gregory Nutt
741750869c Add microSD card detect pin definition for the STM32F4DIS-BB board 2014-09-19 13:43:35 -06:00
Gregory Nutt
962aab5320 Add microSD card detect pin definition for the STM32F4DIS-BB board 2014-09-19 13:43:35 -06:00
Gregory Nutt
f3c615a5b0 Add STM32F4DIS-BB GPIO pin usage 2014-09-13 12:25:01 -06:00
Gregory Nutt
047eda6159 Add STM32F4DIS-BB GPIO pin usage 2014-09-13 12:25:01 -06:00
Gregory Nutt
d3c09af3c2 Add the network enabled NSH configuration for the STM32F4Discovery board with the STM32F4DIS-BB base board 2014-09-13 08:37:07 -06:00
Gregory Nutt
b7f867ef1e Add the network enabled NSH configuration for the STM32F4Discovery board with the STM32F4DIS-BB base board 2014-09-13 08:37:07 -06:00
Gregory Nutt
842f8fb051 Add STM32F4Discovery configuration with the STM32F4DIS-BB base board 2014-09-13 07:28:14 -06:00
Gregory Nutt
70c33928d8 Add STM32F4Discovery configuration with the STM32F4DIS-BB base board 2014-09-13 07:28:14 -06:00
Gregory Nutt
cb92a62dba Having a symbol table is an option. There are no symbol tables with CONFIG_BUILD_KERNEL, for example. 2014-09-12 12:48:22 -06:00
Gregory Nutt
8f30804e05 Having a symbol table is an option. There are no symbol tables with CONFIG_BUILD_KERNEL, for example. 2014-09-12 12:48:22 -06:00
Gregory Nutt
e09923cd8e Every defconfig file should now have a valid setting for CONFIG_WDOG_INTRESERVE 2014-09-03 06:55:06 -06:00
Gregory Nutt
9ee4b9e2b1 Every defconfig file should now have a valid setting for CONFIG_WDOG_INTRESERVE 2014-09-03 06:55:06 -06:00
Gregory Nutt
3dd8c08714 Remove final traces of the 8015 from the NuttX source tree 2014-09-01 13:21:15 -06:00
Gregory Nutt
23147c40a5 Remove final traces of the 8015 from the NuttX source tree 2014-09-01 13:21:15 -06:00
Gregory Nutt
f15246ec6c Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported 2014-08-31 10:54:55 -06:00
Gregory Nutt
3c1a70c9dc Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported 2014-08-31 10:54:55 -06:00
Gregory Nutt
05b9ee3ad4 Various changes/fixes to get configs/stm32f4discovery/kostest working after the big configuration renaming (and after a long period of bit rot) 2014-08-29 16:23:46 -06:00
Gregory Nutt
0f5dc2fc65 Various changes/fixes to get configs/stm32f4discovery/kostest working after the big configuration renaming (and after a long period of bit rot) 2014-08-29 16:23:46 -06:00
Gregory Nutt
9a5cb4b5b1 Some initial clean-up in verifying the CONFIG_BUILD_PROTECTED configuration change 2014-08-29 15:07:35 -06:00
Gregory Nutt
faf16f229c Some initial clean-up in verifying the CONFIG_BUILD_PROTECTED configuration change 2014-08-29 15:07:35 -06:00
Gregory Nutt
62231a28e9 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
1b2a96c965 Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support 2014-08-24 06:42:11 -06:00
Gregory Nutt
1624e2fbcf Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support 2014-08-24 06:42:11 -06:00
Gregory Nutt
169c260be6 Update some STM32F4Discovery configurations 2014-08-22 15:24:26 -06:00
Gregory Nutt
f7899c655a Update some STM32F4Discovery configurations 2014-08-22 15:24:26 -06:00
Gregory Nutt
5f340dc70a Update some STM32F4Discovery configurations 2014-08-22 15:19:25 -06:00
Gregory Nutt
d863ddb60f Update some STM32F4Discovery configurations 2014-08-22 15:19:25 -06:00
Gregory Nutt
49deb059d4 Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems 2014-08-07 13:42:47 -06:00
Gregory Nutt
0aa7209765 Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems 2014-08-07 13:42:47 -06:00
Gregory Nutt
7edc6a5666 Remove CONFIG_DISABLE_CLOCK 2014-08-07 12:35:24 -06:00
Gregory Nutt
caba61999a Remove CONFIG_DISABLE_CLOCK 2014-08-07 12:35:24 -06:00
Gregory Nutt
bb6ba5198b Rename CONFIG_NX_MOUSE to CONFIG_NX_INPUT, then add CONFIG_NX_XYINPUT_MOUSE and CONFIG_XYINPUT_TOUCHSCREEN 2014-07-16 16:31:31 -06:00
Gregory Nutt
8182037783 Rename CONFIG_NX_MOUSE to CONFIG_NX_INPUT, then add CONFIG_NX_XYINPUT_MOUSE and CONFIG_XYINPUT_TOUCHSCREEN 2014-07-16 16:31:31 -06:00
Gregory Nutt
19d8b0ce97 Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
befcb1c961 Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
cbe4d3573d Rename apps/examples/uip to apps/examples/webserver 2014-07-03 17:31:17 -06:00
Gregory Nutt
44988c6ca6 Rename apps/examples/uip to apps/examples/webserver 2014-07-03 17:31:17 -06:00
Gregory Nutt
285f66a2c1 NET: Rename uiplib/UIPLIB to netlib/NETLIB 2014-07-02 16:04:25 -06:00
Gregory Nutt
0eb1666cb0 NET: Rename uiplib/UIPLIB to netlib/NETLIB 2014-07-02 16:04:25 -06:00
Gregory Nutt
f3df5f2bb5 Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
2abe0dd6dd Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
bb5f545173 STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
6a8a62c0c1 STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
2dbaed4779 The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name 2014-05-05 08:52:02 -06:00
Gregory Nutt
f924601fc1 The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name 2014-05-05 08:52:02 -06:00
Gregory Nutt
77605055ba Add logic to register HID keybaord and mouse classes; fix some conditional compilation. From Leo 2014-04-17 11:22:46 -06:00
Gregory Nutt
6d0863b657 Add logic to register HID keybaord and mouse classes; fix some conditional compilation. From Leo 2014-04-17 11:22:46 -06:00
Gregory Nutt
51950d7850 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
Gregory Nutt
e21212f2b4 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
Gregory Nutt
ab5b37189b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
f8024cf409 More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
bce2e4b7bb STM32 OTG FS Hose and others: Remove some warnings 2014-04-12 09:58:23 -06:00
Gregory Nutt
38728a35f5 STM32 OTG FS Hose and others: Remove some warnings 2014-04-12 09:58:23 -06:00
Gregory Nutt
069ea487ae Long needed clean up of DNS resolver for coding style and naming conventions 2014-04-11 12:25:32 -06:00
Gregory Nutt
3e085ec0af Long needed clean up of DNS resolver for coding style and naming conventions 2014-04-11 12:25:32 -06:00
Gregory Nutt
6cf9895b95 configs/*/defconfig: Increase the number of pre-allocated watchdogs in configurations that use networking or USB 2014-04-09 10:57:56 -06:00
Gregory Nutt
6be62a7ef3 configs/*/defconfig: Increase the number of pre-allocated watchdogs in configurations that use networking or USB 2014-04-09 10:57:56 -06:00
Gregory Nutt
a32e0e2b30 SAM4E-EK: Add an NSH configuration that uses a USB CDC/ACM console 2014-03-22 09:27:43 -06:00
Gregory Nutt
f066b87828 SAM4E-EK: Add an NSH configuration that uses a USB CDC/ACM console 2014-03-22 09:27:43 -06:00
Gregory Nutt
847d7e6645 Typo fixed 2014-03-20 10:56:43 -06:00
Gregory Nutt
de0c5d50da Typo fixed 2014-03-20 10:56:43 -06:00
Gregory Nutt
ca25657f7e Refresh several defconfig files to (1) bring them up-to-date, and (2) to confirm that no bugs were introduced in recent massive Kconfig file changes 2014-03-06 16:02:18 -06:00
Gregory Nutt
bd8a0aec21 Refresh several defconfig files to (1) bring them up-to-date, and (2) to confirm that no bugs were introduced in recent massive Kconfig file changes 2014-03-06 16:02:18 -06:00
Gregory Nutt
7050b91155 Removed the CONFIG_NUTTX_NEWCONFIG setting from every defconfig file 2014-03-06 12:23:26 -06:00
Gregory Nutt
596bdc73df Removed the CONFIG_NUTTX_NEWCONFIG setting from every defconfig file 2014-03-06 12:23:26 -06:00
Gregory Nutt
5317d78c41 Use common naming for rest of the toolchains too 2014-03-05 16:29:58 -06:00
Gregory Nutt
72164cb176 Use common naming for rest of the toolchains too 2014-03-05 16:29:58 -06:00
Gregory Nutt
d7d856e504 Use common naming for all buildroot toolchains 2014-03-05 15:37:07 -06:00
Gregory Nutt
79dc48a71a Use common naming for all buildroot toolchains 2014-03-05 15:37:07 -06:00
Gregory Nutt
dd0a0258d9 configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools 2014-03-04 08:58:01 -06:00
Gregory Nutt
18f74bade9 configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools 2014-03-04 08:58:01 -06:00
Gregory Nutt
183aea202b Fix a typo in the STM32F4 Discovery board Makefile. From Max Kriegleder 2014-03-01 14:16:34 -06:00
Gregory Nutt
e0a9decf48 Fix a typo in the STM32F4 Discovery board Makefile. From Max Kriegleder 2014-03-01 14:16:34 -06:00
Gregory Nutt
f32456d562 configs/eagle100/nsh converted to use the kconfig-frontends tools 2014-03-01 14:12:05 -06:00
Gregory Nutt
e4c56e27ed configs/eagle100/nsh converted to use the kconfig-frontends tools 2014-03-01 14:12:05 -06:00
Gregory Nutt
58eed436e9 Removed almost all ostest configurations 2014-02-28 19:19:11 -06:00
Gregory Nutt
cbcabe3314 Removed almost all ostest configurations 2014-02-28 19:19:11 -06:00
Gregory Nutt
c3b73474ab Refresh the STM32F4Discover/cxxtext configuration 2014-02-28 10:00:25 -06:00
Gregory Nutt
0a61c545e0 Refresh the STM32F4Discover/cxxtext configuration 2014-02-28 10:00:25 -06:00
Gregory Nutt
de80fe2e04 configs/*/defconfig: If CONFIG_NSH_LIBRARY is set, make sure that CONFIG_NSH_READLINE is also set or the configuration will use the CLE the next time it is reconfigured 2014-02-28 07:45:51 -06:00
Gregory Nutt
47ca6ef4d4 configs/*/defconfig: If CONFIG_NSH_LIBRARY is set, make sure that CONFIG_NSH_READLINE is also set or the configuration will use the CLE the next time it is reconfigured 2014-02-28 07:45:51 -06:00
Gregory Nutt
f1ae3f4c76 Comment out all CONFIG_APPS_DIR settings in all defconfig files. We con't know where the apps/ dir will be be until install time 2014-02-21 15:35:53 -06:00
Gregory Nutt
bcaab16d1f Comment out all CONFIG_APPS_DIR settings in all defconfig files. We con't know where the apps/ dir will be be until install time 2014-02-21 15:35:53 -06:00
Gregory Nutt
3de471e675 STM32F4 Discovery: Rename most everything in the board source directory to conform with the ever evolving naming standard 2014-02-03 17:19:30 -06:00
Gregory Nutt
76c982583d STM32F4 Discovery: Rename most everything in the board source directory to conform with the ever evolving naming standard 2014-02-03 17:19:30 -06:00
Gregory Nutt
42a86a9cba rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
2f837ccd2a rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
f797601f19 Rename up_irqbutton() to board_button_irq() 2014-01-24 14:04:07 -06:00
Gregory Nutt
1d5b2d3d3e Rename up_irqbutton() to board_button_irq() 2014-01-24 14:04:07 -06:00
Gregory Nutt
f4d84ecd7e Rename up_buttons() to board_buttons() 2014-01-24 13:59:24 -06:00
Gregory Nutt
1ac245b9c6 Rename up_buttons() to board_buttons() 2014-01-24 13:59:24 -06:00
Gregory Nutt
e5bfdcf36c Rename up_buttoninit to board_button_intialize 2014-01-24 13:50:23 -06:00
Gregory Nutt
b0c0df84f6 Rename up_buttoninit to board_button_intialize 2014-01-24 13:50:23 -06:00
Gregory Nutt
efbf03ad76 The optimization level can now be selected as part of the configuration 2014-01-24 07:45:35 -06:00
Gregory Nutt
f3f5378acc The optimization level can now be selected as part of the configuration 2014-01-24 07:45:35 -06:00
Gregory Nutt
ac8ace08f1 Change how TCP read-ahead is selected to better integrate with TCP write buffering 2014-01-13 13:55:51 -06:00
Gregory Nutt
7eef2f9410 Change how TCP read-ahead is selected to better integrate with TCP write buffering 2014-01-13 13:55:51 -06:00
Gregory Nutt
628839fdf8 Looks like an error all all kernel build linker scripts 2013-12-30 17:57:20 -06:00
Gregory Nutt
a463c71ac3 STM3240G-EVAL: Add kernel build mode support and an NxWM kernel mode configuration 2013-12-29 13:15:08 -06:00
Gregory Nutt
c51659a8df Fix cloned typo in user space definition 2013-12-27 10:31:37 -06:00
Gregory Nutt
91052a1029 Finishes separation of debug symbols and optimization selections 2013-12-20 13:23:42 -06:00
Gregory Nutt
9e416c2363 Looks like an error all all kernel build linker scripts 2013-12-30 17:57:20 -06:00
Gregory Nutt
804e80d0cb STM3240G-EVAL: Add kernel build mode support and an NxWM kernel mode configuration 2013-12-29 13:15:08 -06:00
Gregory Nutt
79d1ad4bc2 Fix cloned typo in user space definition 2013-12-27 10:31:37 -06:00
Gregory Nutt
cbf86ac01f Finishes separation of debug symbols and optimization selections 2013-12-20 13:23:42 -06:00
Gregory Nutt
635a3cb3fa A10: Timer interrupt handler 2013-12-13 12:42:26 -06:00
Gregory Nutt
994a49f8b8 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
d6b81cc7ef A10: Timer interrupt handler 2013-12-13 12:42:26 -06:00
Gregory Nutt
692b087d07 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
33e3bbefd5 Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested 2013-09-25 18:50:14 -06:00
Gregory Nutt
b3ecd158ac Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested 2013-09-25 18:50:14 -06:00
Gregory Nutt
229c5748c5 Move apps/examples/cdcacm to apps/system/cdcacm 2013-09-25 17:23:03 -06:00
Gregory Nutt
fa027d30e0 Move apps/examples/cdcacm to apps/system/cdcacm 2013-09-25 17:23:03 -06:00
Gregory Nutt
024cb72187 Move apps/examples/usbmsc to apps/system/usbmsc 2013-09-25 16:54:39 -06:00
Gregory Nutt
0b450bc202 Move apps/examples/usbmsc to apps/system/usbmsc 2013-09-25 16:54:39 -06:00
Gregory Nutt
f19af5572d Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
8134ab2d3d Clean up some LP17xx and STM32 USB host configuration compilation errors due to the massive changes to the USB host interfaces needed to support the SAMA5 2013-08-13 17:43:19 -06:00
Gregory Nutt
16ac25fd09 Clean up some LP17xx and STM32 USB host configuration compilation errors due to the massive changes to the USB host interfaces needed to support the SAMA5 2013-08-13 17:43:19 -06:00
Gregory Nutt
567c513046 Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports. 2013-08-13 15:03:46 -06:00
Gregory Nutt
1700d06d89 Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports. 2013-08-13 15:03:46 -06:00
Gregory Nutt
3fbe4dd685 First of several changes needed to support multiple USB host root hubs 2013-08-12 14:44:06 -06:00
Gregory Nutt
e09bd50fdd First of several changes needed to support multiple USB host root hubs 2013-08-12 14:44:06 -06:00
Gregory Nutt
6424d0d63a Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
ed49812d2c Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
efded598fd Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
70f0ffdfc5 Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
17810f3e6f Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
179bae1aee Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory 2013-06-25 09:13:30 -06:00
Gregory Nutt
3d1f29217e Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory 2013-06-25 09:13:30 -06:00
Gregory Nutt
581e409c37 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
d11050e978 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
e474546f27 Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes 2013-06-21 09:32:57 -06:00
Gregory Nutt
add0a67995 Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes 2013-06-21 09:32:57 -06:00
Gregory Nutt
b40def3027 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
1f056e3826 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
9ab85d01ef Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
83ecc03d17 Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
936c435d2e Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board 2013-06-03 15:11:56 -06:00
Gregory Nutt
a732e03139 Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board 2013-06-03 15:11:56 -06:00
Gregory Nutt
0906d557c3 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
4748599a43 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
5336c8c0d5 Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
6db3a75c55 Optimize request buffer sizes in the serial USB drivers so that we avoid so many NULL packets and so that the OUT request buffer size is exactly the max packet size. 2013-05-29 12:30:37 -06:00
Gregory Nutt
47bbf54f11 Optimize request buffer sizes in the serial USB drivers so that we avoid so many NULL packets and so that the OUT request buffer size is exactly the max packet size. 2013-05-29 12:30:37 -06:00
Gregory Nutt
245cd9366d Fix STM32F1 and F3 USB device driver. It was not handling NULL packets correctly and it prevent use of the driver with the CDC/ACM class 2013-05-29 10:26:00 -06:00
Gregory Nutt
aa9589ac8f Fix STM32F1 and F3 USB device driver. It was not handling NULL packets correctly and it prevent use of the driver with the CDC/ACM class 2013-05-29 10:26:00 -06:00
Gregory Nutt
ec635b5678 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
6d3a292f02 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
5de300ffc2 Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available). 2013-05-03 12:52:33 -06:00
Gregory Nutt
72179b7773 Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available). 2013-05-03 12:52:33 -06:00
Gregory Nutt
13f5e5f3d7 Fix typos in Kconfig files 2013-04-20 17:37:32 -06:00
Gregory Nutt
b9c6062e5e Fix typos in Kconfig files 2013-04-20 17:37:32 -06:00
Gregory Nutt
79d0f577d0 Fix comments, references to the old SVN, and links to the old SVN. Replace with equivalent GIT info 2013-04-19 18:35:06 -06:00
Gregory Nutt
2848f657ed Fix comments, references to the old SVN, and links to the old SVN. Replace with equivalent GIT info 2013-04-19 18:35:06 -06:00
Gregory Nutt
556f27f674 make oldcoonfig updates to configurations 2013-04-18 11:39:17 -06:00
Gregory Nutt
58bebcaac4 make oldcoonfig updates to configurations 2013-04-18 11:39:17 -06:00
Gregory Nutt
b53760bf9c Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
Gregory Nutt
23db0682b7 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
8cfc753b8f Add nxlines configuratin for the Open1788
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5795 42af7a65-404d-4744-a932-0658087f49c3
2013-03-27 18:29:22 +00:00
patacongo
50546cb1a2 Add nxlines configuratin for the Open1788
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5795 42af7a65-404d-4744-a932-0658087f49c3
2013-03-27 18:29:22 +00:00
patacongo
b2ef4a0f24 binfmt_execmodule() calls to sched_releasttcb() was not updated to use the second, thread type parameter
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5779 42af7a65-404d-4744-a932-0658087f49c3
2013-03-23 19:06:40 +00:00
patacongo
82b86f9c4a binfmt_execmodule() calls to sched_releasttcb() was not updated to use the second, thread type parameter
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5779 42af7a65-404d-4744-a932-0658087f49c3
2013-03-23 19:06:40 +00:00
patacongo
983a9dca49 Rework of kernel build signal dispatch to user-space handlers
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5778 42af7a65-404d-4744-a932-0658087f49c3
2013-03-23 14:46:02 +00:00