sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
29,922 Commits 1 Branch 0 Tags 291 MiB
c27cee2a94
Commit Graph

2376 Commits

Author SHA1 Message Date
Gregory Nutt
e29b50e00a Fix recurring naming problem: KXTJ9 vs KXJT9. 2017-02-18 08:08:41 -06:00
David Sidrane
11d1b2e636 Typo mmcsd/mmcsd_sdio.c 2017-02-13 13:24:47 -10:00
Marc Rechté
d501ffc563 Kinetis SDHC driver fixes. 2017-02-09 11:28:30 -06:00
Alan Carvalho de Assis
248d5d3185 MMC/SD SDIO: Some drivers need to start DMA before sending CMD24 and some AFTER 2017-02-09 11:13:05 -06:00
Gregory Nutt
0df1c556dc drivers/lcd: ssd1306_configspi() must have global scope. 2017-02-09 07:45:25 -06:00
Wolfgang Reißnegger
cfe7c4012e USBMSC: Always set LUN readonly flag. 2017-02-08 17:17:19 -08:00
Gregory Nutt
9f859774a1 setvbuf: Add support for configuration of line buffering. 2017-02-08 11:28:24 -06:00
Gregory Nutt
764f503150 Remove duplicate setting for SDIO_DMA from drivers/mmcsd/Kconfig 2017-02-06 13:16:52 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
2a4791f4ee Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set. 2017-01-31 09:51:15 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
a70ea9d3bc Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev. 2017-01-30 07:26:38 -06:00
Alan Carvalho de Assis
c482437325 MMCSD_SDIO: Only wait for card ejected if card detection is supported 2017-01-26 07:44:17 -06:00
Gregory Nutt
ba2b345990 Remove a few remaining use of the obsolteted 'Compilation Switches' program section 2017-01-22 08:57:18 -06:00
Gregory Nutt
5e0c18b535 Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198) 
Adding missing CONFIG_ prefix
 2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b Adding missing CONFIG_ prefix 2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered. 2017-01-15 13:00:50 -06:00
Gregory Nutt
2d9668fbd2 Fix a typo in a comment 2017-01-12 16:24:41 -06:00
Aleksandr Vyhovanec
bf528f2071 packed_struct replaced by begin_packed_struct and end_packed_struct 2017-01-09 14:17:49 +03:00
David Sidrane
548108764a BugFix:uart_ops_s portion of cdcacm will not be initalized with correct functions if CONFIG_SERIAL_DMA is lit. 
This fixes the issses in a C99 compatible way
 2016-12-17 04:29:41 -10:00
Gregory Nutt
4795d58e03 Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers. 2016-12-15 07:16:24 -06:00
Gregory Nutt
ca92ecafa7 MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine. 2016-12-14 17:44:12 -06:00
Gregory Nutt
f4f32bc740 MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines. 2016-12-14 17:04:27 -06:00
Alan Carvalho de Assis
3c4a8d05b0 MMC/SD SDIO driver: Change the endianess order to read the return of long response command 2016-12-14 14:17:52 -06:00
Gregory Nutt
f063e4c5ac Remove Calypso architecture support and support for Calypso SERCOMM driver. 2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b Remove all Calypso board configurations 2016-12-13 18:24:49 -06:00
Gong Darcy
44b7975a5e SSD1306: Fix errors in SPI mode configuration 2016-12-04 10:07:46 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
ad3897531f C5471 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 12:17:55 -06:00
Gregory Nutt
43459fe75e DM09x0 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 11:42:15 -06:00
Gregory Nutt
eba1e076ec PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT 2016-12-03 09:50:14 -06:00
Gregory Nutt
bfa1da14e2 LM3S Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 08:32:49 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Janne Rosberg
8442bf66b9 usbhost_cdcacm: add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to supported class and proto 2016-11-30 12:20:23 -06:00
Janne Rosberg
4b282f219a usbhost_composite: fix end offset in usbhost_copyinterface() 2016-11-30 12:18:23 -06:00
Gregory Nutt
96be43b270 drivers/net/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:44:23 -06:00
Gregory Nutt
1793c1f8e1 Trivial, cosmetic change 2016-11-29 15:03:51 -06:00
Gregory Nutt
9ee3f3b933 sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled. 2016-11-28 18:36:26 -06:00
Gregory Nutt
d65be718c2 sched_note: Extend OS instrumentation to include some SMP events. 2016-11-27 17:14:57 -06:00
Gregory Nutt
0804286ad3 arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS. 2016-11-19 09:20:01 -06:00
Wolfgang Reißnegger
88539a7497 USBMSC: Fix length of mode6 sense reply packet. 2016-11-18 17:23:21 -08:00
Gregory Nutt
cdbc66addd Merge branch 'master' of bitbucket.org:nuttx/nuttx 2016-11-18 09:30:40 -06:00
Gregory Nutt
936b55f608 drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers. 2016-11-18 09:22:49 -06:00
Gregory Nutt
175ec43628 Merged in slorquet/nuttx/timerfixes (pull request #171) 
Timerfixes
 2016-11-18 14:45:36 +00:00
Gregory Nutt
52560bba37 ENC28J60: Allow either HP or LP work queue to be used. 2016-11-18 08:41:27 -06:00
Sebastien Lorquet
5363d0619a Fix warnings 2016-11-18 15:26:08 +01:00
Gregory Nutt
47b52a2633 Fix an error in manually bringing in Sebastien's changes; Update some comments. 2016-11-17 16:15:06 -06:00
Gregory Nutt
9acd57c819 Fix up some naming and update some comments. 2016-11-17 15:50:39 -06:00
Gregory Nutt
19c1c9d78b All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems. 2016-11-17 15:03:31 -06:00
Sebastien Lorquet
197cec58d2 timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage. 2016-11-17 14:38:21 -06:00
Gregory Nutt
d4a048c0c6 Timer driver: Add hooks to support signal notification of timer expiration. Commented out because invasive interface changes would also be required to complete the implementation. 2016-11-17 12:41:11 -06:00
Gregory Nutt
ecb2d4cbc1 drivers/timer: Remove the TIOC_SETHANDLER IOCTL call. This calls directly from the timer driver into application code. That is non-standard, non-portable, and cannot be supported 2016-11-17 11:52:42 -06:00
Alan Carvalho de Assis
a6b7730f8c Add Vishay VEML6070 driver and support for STM32F103-Minimum board 2016-11-13 11:44:28 -06:00
Marc Rechté
58c2cd2843 drivers/ioexpander: Add some debug output. 2016-11-08 07:46:25 -06:00
Gregory Nutt
b0dffdc2ca Fix a number of header files with mismatched 'extern C {' and '}' 2016-11-05 07:25:05 -06:00
Gregory Nutt
6ff6cca1a0 Fix some mispellings of semaphore 2016-11-03 17:48:36 -06:00
Gregory Nutt
4fcbe8e410 drivers: Disable priority inheritance on all semaphores used for signaling 2016-11-03 11:00:47 -06:00
Gregory Nutt
47b043df1e drivers/serial.c: Make sure that priority inheritance is not enabled for the signaling semaphores used in the serial driver. 2016-11-03 08:16:59 -06:00
Paul A. Patience
d89765e1d0 spi: Fix Kconfig warning 
This commit moves the ARCH_HAVE_SPI options outside the check
for SPI. Those options don't depend on SPI, and Kconfig files
in arch/ enable them even if SPI isn't enabled.

Sourcing the driver's Kconfig in drivers/Kconfig only if
support for the driver is enabled prevents us from defining
these ARCH_HAVE options in the driver's Kconfig. We should
probably remove the other checks in drivers/Kconfig and check
if the drivers are enabled only in their Kconfig.
 2016-11-02 13:16:12 -04:00
Gregory Nutt
8dd2494407 Review of last PR: Fix return value (ERROR is not a value return value in this context). Fix some spacing. 2016-11-01 15:13:09 -06:00
Aleksandr Vyhovanec
be1626ad7b Added EEPROM timeout 2016-11-02 00:03:16 +03:00
Gregory Nutt
de6db52b52 Oops... Last commit had some garbage in the file 2016-10-24 15:36:11 -06:00
Gregory Nutt
3d4ce55ebd Oops.. a couple of hunks failed in the last patch. Hope I got them fixed correctly. 2016-10-24 15:25:40 -06:00
Max Nekludov
146d7e7921 drivers/net/tun.c: Fix bug in TUN interface driver 2016-10-24 15:17:01 -06:00
Max Kriegleder
77e5115e23 syslog: Fixes required for file syslog output 2016-10-19 08:27:20 -06:00
Janne Rosberg
847d2b4218 usbhost/composite: fix compile; missing semicolons 2016-10-18 11:52:23 -06:00
Janne Rosberg
72f13db4bf usbhost/enumerate: fix possible buffer overwrite 2016-10-18 08:15:19 -06:00
Gregory Nutt
6a0917ae7f Eliminate warnings 2016-10-06 07:44:17 -06:00
Gregory Nutt
2da3da7fd6 Costmetic changes from review of last commit 2016-09-25 17:24:39 -06:00
Gregory Nutt
0908a6c6b9 Fix calculations using MSEC_PER_TICK. If USEC_PER_TICK is less than 1000, then MSEC_PER_TICK will be zero. It will be inaccurate in any case. 2016-09-25 08:17:33 -06:00
Alan Carvalho de Assis
61980caee5 drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project. 2016-09-16 12:45:53 -06:00
Gregory Nutt
de3e35f00a include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique 2016-09-16 09:39:51 -06:00
Aleksandr Vyhovanec
b0f973d901 MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F. 2016-09-02 11:00:04 -06:00
Aleksandr Vyhovanec
3f40541b21 MTD: Fixed cloned typos in several FLASH drivers. 2016-09-02 07:27:57 -06:00
Gregory Nutt
7f6a403b96 USB host composite is at least partially functional. No longer depends on CONFIG_EXPERIMENTAL 2016-09-02 07:26:29 -06:00
Gregory Nutt
e958c32e4d USB host composite: Using wrong interface number from interface descriptor. 2016-08-31 13:29:38 -06:00
Gregory Nutt
ebe829c4b9 USB host composite: A test should be <= not just < 2016-08-31 13:24:38 -06:00
Gregory Nutt
7ea9632592 Change the way that contactless IOCTL commands are defined. All IOCTL commands must be unique. 2016-08-31 11:30:22 -06:00
Gregory Nutt
4b0e8e56cf Add contactless/ directory to Documentation 2016-08-31 10:58:08 -06:00
Gregory Nutt
7b75a32ca1 Improve some comments 2016-08-31 08:16:12 -06:00
Gregory Nutt
cb7c1c1f14 USB host composite: Add an option to permit support only a subset of the composite intefaces. 2016-08-31 07:56:27 -06:00
Sebastien Lorquet
1d1affdd2b fix mfrc522 2016-08-31 13:46:27 +02:00
Sebastien Lorquet
d4048f3eeb CL fixes 2016-08-31 13:41:49 +02:00
Sebastien Lorquet
90568f9e8f Add CL make.defs 2016-08-31 13:25:21 +02:00
Sebastien Lorquet
e5ba71caf8 add cl kconfig 2016-08-31 13:24:19 +02:00
Sebastien Lorquet
3bf11c7203 Add contactless drivers, with renames 2016-08-31 13:20:53 +02:00
Sebastien Lorquet
3654b841bc Move contactless drivers to their own directory 2016-08-31 13:08:58 +02:00
Gregory Nutt
aa0d1868f5 USB host composite: Fix places where the wrong pointer was used; Add a test for an error condition. 2016-08-30 13:58:01 -06:00
Gregory Nutt
ac623abc7d USB host composite: Reosolves last remaining REVISIT design issues. Compiles clean with no errors and warning and is fully ready for testing. 2016-08-30 10:52:41 -06:00
Gregory Nutt
ee83e49f75 Update a comment 2016-08-29 15:43:11 -06:00
Gregory Nutt
1ce4db8008 USB host composite: Save some information that will be needed to create a class-specific configuration. 2016-08-29 15:02:15 -06:00
Gregory Nutt
f4f807100b Update comment 2016-08-29 14:55:03 -06:00
Alpo Leinonen
7d5173ca09 USB host composite: Several syntactic errors fixed 2016-08-29 07:53:57 -06:00
Gregory Nutt
43abb7cb3a Mark USB host compsite feature EXPERMENTAL; update ChangeLog 2016-08-28 14:51:55 -06:00
Gregory Nutt
31c364457a CLASS_CONNECT needs to be called for each member of the composite. 2016-08-28 08:48:40 -06:00
Gregory Nutt
58b45d64d7 Fix composite connect method. 2016-08-28 08:33:38 -06:00
Gregory Nutt
5d4428be93 Add check of class ID in device scriptor header 2016-08-27 10:53:43 -06:00
Gregory Nutt
c973e0d3ba Add the logic necessary to abstract the register lookup information for each candiate class 2016-08-27 10:31:18 -06:00
Gregory Nutt
2460d41ae0 Add more logic to the USB host composite wrapper. 2016-08-26 17:03:16 -06:00
Gregory Nutt
0860621e60 Fill one more case of 'Missing logic' in the USB host composite wrapper. 2016-08-26 12:34:58 -06:00
Gregory Nutt
3c0b287fe9 Fill in a little of the 'Missing logic' in the USB host composite wrapper. 2016-08-26 12:24:35 -06:00
Gregory Nutt
ea8ce7acb6 Trivial rename 2016-08-26 11:05:50 -06:00
Gregory Nutt
a228b0cc36 Add a little more meat to the still very USB host composite skeleton. Not quite so boney now. 2016-08-26 10:33:41 -06:00
Gregory Nutt
fa4e9e3c1c Add a little more meat to the still very bony USB host composite skeleton. 2016-08-26 10:13:35 -06:00
Gregory Nutt
579e338cd3 Add a little more meat to the USB host composite skeleton. Still pretty bony. 2016-08-26 09:47:38 -06:00
Gregory Nutt
8a1d6c9ed8 Basic framework that might be used to add USB host support 2016-08-26 09:07:52 -06:00
Gregory Nutt
c51b642f81 Fix some driver return values. If sem_wait fails, the errcode is in errno, not the return value. 2016-08-25 07:15:59 -06:00
Alexander Entinger
221fcfd8f1 drivers/sensors: Add driver for the Bosch BMG160 3 axis gyroscop. 2016-08-24 09:41:04 -06:00
Alexander Entinger
0044910e33 drivers/sensors: Add driver for the LIS3DSH 3 axis accelerometer. 2016-08-24 08:28:45 -06:00
Beat Küng
dd1f679891 mtd: Add Fujistu MB85RS256B ramtron support 
contributed by flatlevel from https://github.com/PX4/NuttX/pull/79
 2016-08-23 18:27:04 +00:00
Entinger Alexander
b29287b022 drivers/sensors: Add driver for the MLX90393 3 axis magnetometer. 2016-08-23 10:48:08 -06:00
Entinger Alexander
338bf8c9e3 drivers/sensors: Add drvier for the LIS3MDL 3 axis magnetometer 2016-08-23 08:22:47 -06:00
Gregory Nutt
60b70f7dbb Make xorshift128 re-entrant so that we do do have to suffer the overhad of serialization controls. 2016-08-21 07:47:53 -06:00
Gregory Nutt
6f833be9d5 Separate XorShift128 PRNG from /dev/urandom and make it generally available. 2016-08-20 11:36:02 -06:00
Gregory Nutt
cbebd9c99b Lower case hex 2016-08-17 17:32:53 -06:00
Alan Carvalho de Assis
d3a5bd4ba0 drivers/audio/tonic.: Remove dependency on LIBM for creating a static table with frequencies notes. 2016-08-17 16:41:00 -06:00
Alan Carvalho de Assis
229a200734 Add NULL termination to tune string and fix missing break 2016-08-17 16:34:49 -06:00
Alan Carvalho de Assis
8b99dd4cdb drivers/audio: Add Audio Tone Generator for NuttX 2016-08-16 13:20:05 -06:00
Piotr Mienkowski
053aea552f Add support for SAMV7 DACC module 2016-08-15 08:00:36 -06:00
Gregory Nutt
32ebeb15b4 Trivial changes from review of PR 115 2016-08-14 13:47:07 -06:00
Gregory Nutt
ade02a513b Merged in v01d/nuttx/ssd1306-128 (pull request #115) 2016-08-14 13:42:24 -06:00
v01d
943c853939 semantic changes 2016-08-14 16:23:13 -03:00
v01d
02a7fd2430 Make OLED 132x64 use 128x64 for the time being 2016-08-14 14:54:58 -03:00
Gregory Nutt
4b582f0ae9 Fix some comments 2016-08-14 07:16:18 -06:00
Gregory Nutt
e963e8d879 Changes from review of PR 112 2016-08-13 16:53:23 -06:00
Gregory Nutt
72a2fed1d0 Merged in v01d/nuttx/ssd1306_fixes (pull request #112) 
SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes
 2016-08-13 16:33:28 -06:00
v01d
21e930cdba SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes 2016-08-13 19:20:20 -03:00
Gregory Nutt
ab16ad7530 Fix some bugs in the oneshot driver logic 2016-08-12 14:19:11 -06:00
Gregory Nutt
82b86cdcf3 oneshot interface: max_delay method should return time in a standard struct timespec form. 2016-08-12 11:33:10 -06:00
Gregory Nutt
89135c55e4 drivers/timer: Add an upper-half, oneshot timer character driver. 2016-08-12 10:40:07 -06:00
Gregory Nutt
caea59b340 SPI bit order: Add configuration setting to indicate if an architecture-specif SPI implementation does or does not support LSB bit order. 2016-08-08 12:21:20 -06:00
Gregory Nutt
6df28bc74e Make bit-order SPI H/W feature configurable for better error detection 2016-08-08 11:54:13 -06:00
Gregory Nutt
21859af6d9 Add check of return value in drivers affected by last change: Report the error on a failure to set the bit order. 2016-08-08 08:40:37 -06:00
Gregory Nutt
7d4cb73bd6 STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers. 
This change three things:  (1) It adds HWFEAT_LSBFIRST as a new H/W feature.  (2) It changes the implementations of SPI_SETBITS in the STM32 and EFM32 derivers so that negated bit numbers are simply errors and it adds the SPI_HWFEATURES method that can set the LSB bit order, and (3) It changes all calls with negative number of bits from all drivers: The number of bits is now always positive and SPI_HWFEATUREs is called with HWFEAT_LSBFIRST to set the bit order.
 2016-08-08 08:28:13 -06:00
Gregory Nutt
9965cbe428 drivers/: Review and correct some stylistic inconsistencies 2016-08-07 09:43:48 -06:00
Alan Carvalho de Assis
10a7698112 drivers/wireless/mfrc522.c: Fix memory free command 2016-08-07 07:34:01 -06:00
Alan Carvalho de Assis
bfac90f720 Add MFRC522 RFID ISO14443 and Mifare transceiver driver 2016-08-06 08:45:52 -06:00
Gregory Nutt
83c7b4d5d6 SPI driver: Correct return value in case of a certain error condition 2016-08-06 08:07:30 -06:00
Gregory Nutt
50e9a5fa33 Add more options to spi_transfer 2016-08-05 13:22:18 -06:00
Gregory Nutt
5407a673fc Tiva TM4C-1294 Launchpad: tiva_appinit.c is a better home for board_pwm_setup() vs. tiva_bringup.c 2016-08-05 13:05:41 -06:00
Gregory Nutt
7048d08123 drivers/spi: Add an SPI character driver that will permit access to the SPI bus for testing purposes. This driver is a simple wrapper around spi_transfer(). 2016-08-05 11:07:35 -06:00
Gregory Nutt
7da67bc80a drivers/spi: Add a helper function that encapsulates and manages a sequency of SPI transfers. 2016-08-05 10:23:04 -06:00
Gregory Nutt
3d5df2e5af Extend I/O Expander interrupt controls; Add test of level sensitve interrupt to Simulated I/O expander 2016-08-04 16:19:52 -06:00
Gregory Nutt
1f9799b68d I/O Expanders: Interrupt detection logic should not ignore the no-change case. Still need to handle level interrupts even with no change. 2016-08-03 13:10:20 -06:00
Gregory Nutt
803b540e8a Fix various issues with I/O expander and GPIO lower half drivers from testing with simulated I/O expander 2016-08-03 12:46:54 -06:00
Gregory Nutt
778a8131bf SIM: Add a simulated I/O Expander driver 2016-08-03 09:44:48 -06:00
Gregory Nutt
7ba445868c KXJT9: In read(), return multiple samples if the user-provided buffer will hold multiple samples. 2016-08-02 17:32:47 -06:00
Gregory Nutt
30229c217b Cosmetic changes 2016-08-02 10:46:19 -06:00
Gregory Nutt
c32d40fd7d KXJT9 Accelerometer driver from the Motorola Moto Z MDK 2016-08-02 10:38:14 -06:00
Gregory Nutt
62bc64bc55 Back out last Makefile.unix change. After puzzling about this for a while, I moved the definitions to apps/Make.defs. Also includes some cosmetic changes to GPIO lower half driver comments. 2016-08-02 08:37:30 -06:00
Gregory Nutt
9685fd8c99 GPIO driver: Add an IOCTL to unregister a signal handler 2016-08-01 13:52:27 -06:00
Gregory Nutt
0f9fb09a53 GPIO driver: Add an IOCTL command to get the pin type 2016-08-01 12:09:00 -06:00
Gregory Nutt
d0f6a23a32 Ooops.. forgot to add files before last commit 2016-08-01 11:15:29 -06:00
Gregory Nutt
d47aa75669 Add PCF8574 I/O Expander driver. Some cleanup also of other expander drivers. 2016-08-01 11:10:11 -06:00
Gregory Nutt
e0f3df5d97 Remove another lingering kruft 2016-08-01 10:01:28 -06:00
Gregory Nutt
583dad647c TCA64xx: Remove some unused kruft 2016-08-01 09:59:36 -06:00
Gregory Nutt
9d9ff44736 GPIO lower half: Add conditional logic to handle the case where the I/O expander does not support interrupts. 2016-08-01 09:06:58 -06:00
Gregory Nutt
bf60f11801 Remove some unnecessary header file inclusions 2016-08-01 08:55:13 -06:00
Gregory Nutt
3e79ffc6dd Some updates to the last commit 2016-08-01 08:49:15 -06:00
Gregory Nutt
6090f69bfd Add a GPIO lower-half driver that can be used to register a GPIO character driver for accessing pins on an I/O expander. 2016-08-01 08:43:10 -06:00
Gregory Nutt
91b1006d42 I/O Expander Interface: Add argument to interrupt callback. Add a method to detach the interrupt. 2016-08-01 07:26:04 -06:00
Gregory Nutt
fb84e51d5b Minor improvements/fixes to the TCA64xx driver. 2016-08-01 06:48:05 -06:00
Gregory Nutt
c0b83cb4b4 First (untested) cut at a TCA64XX I/O Expander driver leverages from Project Ara 2016-07-31 19:52:44 -06:00
Gregory Nutt
8fab9fb00f Rethink last commit -- probably going down the wrong path 2016-07-31 18:33:04 -06:00
Gregory Nutt
8a67509b34 I/O Expander: Encode and extend I/O expander options to include interrupt configuration. 2016-07-31 18:19:59 -06:00
Gregory Nutt
9f00d87c07 Another update to the I/O Expander skeleton.c file 2016-07-31 17:03:25 -06:00
Gregory Nutt
bbe7a97685 Remove a duplicated line 2016-07-31 16:41:12 -06:00
Gregory Nutt
b98a966135 Another update to the I/O Expander skeleton.c file 2016-07-31 16:39:44 -06:00
Gregory Nutt
c6d65b0943 Update I/O Expander skeleton.c file 2016-07-31 15:43:36 -06:00
Gregory Nutt
99843fe5fe I/O Expander: Update skelton file 2016-07-31 14:42:30 -06:00
Gregory Nutt
becf7e70c4 Add an I/O Expander skelton driver 2016-07-31 11:52:59 -06:00
Gregory Nutt
5f9ee79298 I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h definitons. Add support for an attach() method that may be used when any subset of pin interrupts occur. 
PCA9555 Driver:  Replace the signalling logic with a simple callback using the new definitons of ioexpander.h.  This repartitioning of functionality is necessary because (1) the I/O expander driver is the lower-lower part of any driver that uses GPIOs (include the GPIO driver itself) and should not be interacting directly with the much higher level application layer.  And (2) in order to be compatible with the GPIO driver (and any arbitrary upper half driver), the PCA9555 should not directly signal, but should call back into the upper half.  The upper half driver that interacts directly with the application is the appropriate place to be generating signal.
 2016-07-31 11:09:47 -06:00
Gregory Nutt
79c8bb7ddf Updae more comments 2016-07-27 08:03:09 -06:00
Gregory Nutt
59e0c4411f Correct some comments 2016-07-26 13:39:20 -06:00
Gregory Nutt
0c7f5d62e4 More comments 2016-07-26 12:13:30 -06:00
Gregory Nutt
084d200a66 PTY: Cosmetic, update some comments 2016-07-26 10:09:35 -06:00
Gregory Nutt
eaaa69da0a serial.c: Fix an error in FIONWRITE calculation 2016-07-26 06:47:53 -06:00
Gregory Nutt
e0b4a10dfa drivers/serial/pty.c, serial.c, usbdev/cdcacm.c, include/nuttx/fs/ioctl.h: Fix FIONWRITE and add FIONSPACE. All implementations of FIONWRITE were wrong. FIONWRITE should return the number of bytes waiting in the outgoing send queue, not the free space. Rather, FIONSPACE should return the free space in the send queue. 2016-07-25 14:06:32 -06:00
Gregory Nutt
eb94cc5419 Update some comments 2016-07-24 12:48:37 -06:00
Wolfgang Reissnegger
4f83d58b24 USBMSC: Fix reversed logic on waiting for SCSI thread start. 
The scsi thread was waiting for the wrong condition.

However, this was masked by the fact that the code creating the scsi thread
was also holding usbmsc_scsi_lock(priv) while initializing data, hence this
lock synchronized the scsi thread start with init completion.
 2016-07-23 20:11:00 -07:00
Wolfgang Reissnegger
2974d2b07e USBMSC: Add locks when removing request from queue. 2016-07-23 20:10:41 -07:00
Wolfgang Reissnegger
81f7758848 USBMSC: Fix usbtrace() string. 2016-07-23 20:10:20 -07:00
Gregory Nutt
2d92bffdcc Trivial change left in editor 2016-07-23 13:53:37 -06:00
Gregory Nutt
a932578e76 GPIO driver: Add support for receiving signals from interrupt pins. 2016-07-23 13:53:06 -06:00
Gregory Nutt
9a8c3572db serial.c: Fix a race condition noted by Stefan Kolb. Between the test if the TX buffer is full and entering a critical section, bytes may be removed from the TX buffer making the wait unnecessary. The unnecessary wait is an inefficiency, but not really a problem. But with USB CDC/ACM it can be a problem because the entire TX buffer may be emptied when we lose the race. If that happens that uart_putxmitchar() can hang waiting for data to be removed from an empty TX buffer. 2016-07-22 07:47:59 -06:00
Gregory Nutt
7370d3171a Move include/nuttx/lib.h to include/nuttx/lib/lib.h 2016-07-21 14:05:44 -06:00
Gregory Nutt
23a876ab9c Move include/nuttx/math.h to include/nuttx/lib/math.h 2016-07-21 13:58:09 -06:00
Gregory Nutt
10fff9011a Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h 2016-07-21 13:34:54 -06:00
Gregory Nutt
ee9c66186c ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers. 2016-07-20 14:02:18 -06:00
Gregory Nutt
46dbbe837e rwbuffer.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:54:38 -06:00
Gregory Nutt
1b9b3a7b47 pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Gregory Nutt
e73e82a923 Move prototypes of mkfifo2() from sys/stat.h and pipe2() from unistd.h. They are non-standard and should not be in such a public place. They are not in include/nuttx/fs/fs.h (which isn't a great place either). 2016-07-20 11:57:18 -06:00
Gregory Nutt
2cacc6204a Kconfig: If Pseudo-terminals are enabled, then pipes must be selected as well 2016-07-19 14:26:40 -06:00
Gregory Nutt
318f34fb7d Psuedo-terminal pipe size is now configurable 2016-07-19 14:26:41 -06:00
Gregory Nutt
b28fa8a609 Move pipe() and mkpipe() to nuttx/libc. Change syscalls to pipe2() and mkfifo2() 2016-07-19 14:15:26 -06:00
Gregory Nutt
671d7fae31 Add mkfifo2() and pipe2() which are just like mkfifo() and pipe(), but allow control of the size of the underlying, in-memory circular buffer 2016-07-19 13:51:05 -06:00
Gregory Nutt
9a44f3017b Fix a few typos in the last commit 2016-07-19 13:40:54 -06:00
Gregory Nutt
d6bf67f9ff Alloc different sizes for pipe and fifo buffers 2016-07-19 13:34:18 -06:00
Gregory Nutt
56582e2263 Update some comments 2016-07-19 10:40:23 -06:00
Gregory Nutt
8bf4684de8 Update some comments 2016-07-19 09:53:52 -06:00
Gregory Nutt
a4458c5016 PTY: Fix a race condition in test-fifo-empty-before-read logic 2016-07-19 06:45:02 -06:00
Gregory Nutt
d9fbf4c90f Eliminate some warnings 2016-07-18 11:27:06 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
Gregory Nutt
6194467c13 PTY: Fix termios read input processing.. what was I thinking? Also, if some data was read, pty_read() should not block on the empty FIFO. 2016-07-18 08:00:56 -06:00
Gregory Nutt
e0aaa168aa /dev/urandom: Add option to replace software PRNG with hardware TRNG. 2016-07-18 07:03:47 -06:00
Gregory Nutt
bf25eef79f Update comments in Kconfig 2016-07-18 06:43:08 -06:00
Ken Pettit
39174da3be Remove naming conflict in drivers/mtd/filemntd.c 2016-07-17 20:19:44 -06:00
Gregory Nutt
1b7455c171 Update comments in a Kconfig 2016-07-17 11:09:01 -06:00
Gregory Nutt
07e20479ad /dev/random: Add configuration option to use the congruential PRNG. 2016-07-17 07:56:25 -06:00
Gregory Nutt
ffd3a31649 Rename lib_rand.c to lib_srand.c 2016-07-17 07:11:09 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
ded91e451b PTY: Add TERMIOS support. 2016-07-16 10:43:44 -06:00
Alan Carvalho de Assis
8fa14b8fed Fix poll-related compile issues introduced with recent PTY changes 2016-07-16 07:03:38 -06:00
Gregory Nutt
6a75f2df89 PTY: Add some encode to reduce the likely of misinterpreting the return value of the file open() method 2016-07-15 17:13:21 -06:00
Gregory Nutt
4b1553d3ad PTY: Fix some tricky issues. Now seems to be working. A lot more testing is needed 2016-07-15 14:29:32 -06:00
Gregory Nutt
4b5149b244 PTY: Fix a few errors from early testing 2016-07-15 14:09:02 -06:00
Gregory Nutt
9ecd558002 Add the correct implementation of the file_poll() function 2016-07-15 11:34:08 -06:00
Gregory Nutt
f7f7036db8 Update some comments 2016-07-15 11:15:33 -06:00
Gregory Nutt
4d1b811117 PTY: Add support for the poll() method. 2016-07-15 10:07:33 -06:00
Gregory Nutt
95555a0199 PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt() 2016-07-15 09:39:33 -06:00
Gregory Nutt
6139860c0b PTY: Added PTY IOCTL command definitions. Add support for TIOCGPTN. LIB: Implement ptsname() and ptsname_r() 2016-07-15 08:33:47 -06:00
Gregory Nutt
bcbe9806d2 In SUSv1 model, need to tried the PTY driver pair as unlinked if the master closes its reference 2016-07-15 07:33:48 -06:00
Gregory Nutt
14c216107a PTY: Need to free PTMX minor number is slave is unlinked 2016-07-15 07:22:36 -06:00
Gregory Nutt
e50646336b Add PTY header files 2016-07-15 07:19:42 -06:00
Gregory Nutt
7fa5093fff PTYs prototypes hooked into build and configuration system (as EXPERIMENTAL) 2016-07-15 06:48:10 -06:00
Gregory Nutt
ccf4bfafcb Prototype versions of ptmx/pty suppoprt. Still under developement; not yet hooked into build or configuration system. 2016-07-14 20:20:48 -06:00
Ken Pettit
fea2aaba05 SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256, adds DEBUGASSERT for invalid geometry and additional memory debug logic. Also fixes the dangling pointer on error bug. 2016-07-14 10:31:28 -06:00
Gregory Nutt
6fda036615 Eliminate a warning 2016-07-13 14:09:51 -06:00
Gregory Nutt
74037a7951 Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #97) 
fixes to n25qxxx mtd driver for smartfs support, etc...
 2016-07-12 12:16:13 -06:00
ziggurat29
74777499bc alter the notion of 'blocksize' to be equivalent to 'flash write page size' in order to align with assumptions in the smartfs driver (at least, maybe other things do as well). 
Correct a bug that was previously masked by having blocksize=eraseblocksize which would cause buffer overflows and delicious hardfaults.
Trivial spelling changes in comments, etc.
 2016-07-12 11:46:08 -05:00
Sebastien Lorquet
0d41a1cd42 Before accessing the sst26 flash, the "Global Unlock" command must me executed, which I do in the sst26 driver. 
BUT. re-reading the datasheet, the WREN instruction is required to enable the execution of this command. This was not done.

I have no idea how the driver currently works except by chance. The writes
should never happen at all, the flash is half-enabled!
 2016-07-12 10:34:03 -06:00
Heath Petersen
dc72e16625 handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not enabled 2016-07-12 06:50:58 +00:00
Frank Benkert
5d3cdff16b drivers/pipes/Kconfig: Add missing configuration for pipe ring buffer size. 2016-07-08 06:32:58 -06:00
ziggurat29
2cadf783fd cdcacm_unbind leaks write request objects. This arises due to freeing the 
bulk IN endpoint before the loop that frees the requests via cdcasm_freereq.
That function checks the parameters and skips the freeing if either is NULL.
Freeing the bulk IN enpoint will cause the first param to be NULL, thereby
bypassing the free operation.  To fix, I moved the release of the bulk IN
endpoint until after to loop (much as was the case for the OUT and read
requests, which did not exhibit the problem).
 2016-07-07 12:02:23 -05:00
Paul A. Patience
0690391d42 ioexpander/gpio: Add missing argument to gpin_read and gpout_read 2016-07-05 15:55:16 -04:00
Gregory Nutt
02b91d9880 Add a SYSLOG character device that can be used to re-direct output to the SYSLOG 2016-07-05 12:58:18 -06:00
Gregory Nutt
a39ce80add SYSLOG logic should use existing file interfaces, not re-invent them. 2016-07-05 12:12:44 -06:00
Gregory Nutt
3b825b3e00 Improve a debug assertion 2016-07-05 09:50:54 -06:00
Gregory Nutt
5b6fafb3f5 Several MTD FLASH drivers nullify the freed 'priv' structure and failed to return NULL as stated in the comments. Result, will operate on a NULL pointer later. Noted by David Sidrane. 2016-06-30 17:49:53 -06:00
Gregory Nutt
a897fd4ccf Eliminate use of apps/system/usbmonitor. Use drivers/usbmonitor instead. 2016-06-30 13:09:22 -06:00
Gregory Nutt
7c34a77b54 Move apps/system/usbmonitor to nuttx/drivers/usbmonitor 2016-06-30 12:24:33 -06:00
Gregory Nutt
cbb36416ab Need to use back- not forward-slash in character constant 2016-06-27 09:52:50 -06:00
Michael Spahlinger
3d5e690977 Shadow-Mode: The output- and configuration registers of the IO-Expander 
are held in the microcontrollers memory and only written to the IO-Expander.
 This reduces bus traffic and is more error-proof than the normal read-
 modify-write operation.

 Retry Mode: If enabled and an error occurs while writing to the IO-Expander the
 current transmission is automatically repeated once.
 2016-06-27 08:11:54 -06:00
Gregory Nutt
b16fdaf155 Some small improvements to GPIO driver 2016-06-26 11:24:35 -06:00
Gregory Nutt
db50f13511 Correct some typos in DEBUGASSERT statements 2016-06-24 14:34:21 -06:00
Gregory Nutt
20708c7c5e GPIO driver: Fix inconsistency in naming; beef up a debug assertion. 2016-06-24 11:32:24 -06:00
Gregory Nutt
ae19ca45e0 drivrs/ioexpander: Add support for a very simple GPIO drivers. It supports only pre-conrigured input and output pins and only basic input and output operations. 2016-06-24 09:43:49 -06:00
Wolfgang Reissnegger
d27ebee070 [sam34][timer] Fix ops check in TCIOC_STOP. 2016-06-23 17:12:24 -07:00
Gregory Nutt
acf3b14fe2 Trivial typo fix in README and document 2016-06-22 16:17:57 -06:00
Gregory Nutt
31b8e52267 Update README and documentatino 2016-06-22 14:47:40 -06:00
Gregory Nutt
0cb137d021 SYSLOG device flush logic not meaningful if SYSLOG file channels not supported 2016-06-22 13:35:53 -06:00
Gregory Nutt
1774ff2ed9 Add SYSLOG documentation to the porting guide 2016-06-22 12:26:54 -06:00
Gregory Nutt
b3acebd292 Update/replace drivers/syslog/README.txt 2016-06-22 10:47:27 -06:00
Gregory Nutt
9c87749afc SYSLOG device channel: Pre-pending CR to LF is now a configuration option 2016-06-22 10:08:20 -06:00
Gregory Nutt
91b82dcae3 SYSLOG character device channel will now expand LF to CR-LF 2016-06-22 08:36:50 -06:00
Gregory Nutt
82c890db23 syslog_dev_flush() needs to check if the inode is a mountpoint before calling the flush() method. Noted by David Sidrane. 2016-06-22 05:58:33 -06:00
Gregory Nutt
35cb2fb87d Eliminate a warning 2016-06-21 16:59:46 -06:00
Gregory Nutt
cb55c06153 sched_file_channel(): Comments say that we need to lock the scheduler, but we do not. 2016-06-21 16:39:28 -06:00
Gregory Nutt
8a9bd9af9d SYSLOG: Some rather complex conditional compilation missed a case. 2016-06-21 15:08:09 -06:00
Gregory Nutt
0e1e3bc404 Add a file that I forgot in the last commit; Also update some comments. 2016-06-21 13:33:17 -06:00
Gregory Nutt
e6a1d53869 Extend SYSLOG logic so that we can send SYSLOG output to a file. Not verified on initial commit. 2016-06-21 12:54:47 -06:00
Paul A. Patience
2f76f6e848 can: Add support for poll 2016-06-21 13:02:46 -04:00
David Sidrane
205a4b8498 Missing EXTERN on global variable declaration 2016-06-21 10:09:09 -06:00
Gregory Nutt
8f0c2cdd13 SYSLOG: Change configuration selections to assure that one and only one SYSLOG device can be selected. Also add a check to assure that it is appropriate to use up_putc as the low-level syslog device. Adds CONFIG_SYSLOG_CONSOLE and CONFIG_SYSLOG_SERIAL_CONSOLE. 2016-06-21 09:59:09 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
485aa6b231 SIM: Comment out skip scheduler debug output that can hang the simulation. 2016-06-21 08:59:01 -06:00
Gregory Nutt
c5ac473bc0 SYSLOG: Remove an obsolete, unused configuration item from Kconfig file 2016-06-21 07:58:42 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
5385266756 SYSLOG: Fix a compile problem with assertions enabled. 2016-06-21 07:24:14 -06:00
Sebastien Lorquet
9a22ed1095 Trivial but required change to build SPI EEPPROM driver. 2016-06-21 06:29:26 -06:00
Gregory Nutt
29a99bef0f serial/Kconfig: Oops put SERIAL_CONSOLE definition within if-endif condition. Better outside 2016-06-20 17:49:16 -06:00
Gregory Nutt
cf1375daf7 Break syslog_channel.c up into syslog_channel.c, syslog_putc.c, syslog_force.c and syslog_flush.c to limited what is brought into the link. Separate syslog_emergstream.c from syslog_stream.c. Didn't help in the case I was looking at. 2016-06-20 17:10:52 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
5002e27e84 Since syslog_add_intbuffer can now be called from the IDLE thread, it must use a critical section. Also fix an error in circular buffer index handling. 2016-06-20 07:50:07 -06:00
Gregory Nutt
f4c47636e7 SYSLOG: Debug output from the IDLE task should be forced like interrupt level output 2016-06-20 07:35:38 -06:00
Gregory Nutt
fa365e85f5 Update some cmoments 2016-06-20 06:11:22 -06:00
Stefan Kolb
a68232863e Fix missing implementation of static function 2016-06-20 06:11:21 -06:00
Gregory Nutt
9a19d64610 Reanem syslogstream.c to syslog_steam.c for consistency 2016-06-19 18:19:34 -06:00
Gregory Nutt
7dd66a4620 Need to pass va_list as a reference to vsyslog. This is because va_list is a structure in some compilers and passing of structures in the NuttX sycalls does not work. 2016-06-19 14:50:00 -06:00
Gregory Nutt
690a0e7a6e Eliminate another warning 2016-06-19 13:58:39 -06:00
Gregory Nutt
b68822805f Eliminate a warning 2016-06-19 13:56:49 -06:00
Gregory Nutt
e480b385e6 SYSLOG: syslog_initialize.c appeared twice is list of sources 2016-06-19 13:55:23 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
9434d3e945 There is now one-and-only-one copy of syslog_putc. It is in the SYSLOG channel logic and can redirect syslog output as needed. All former syslog_putc versions were renamed and the corresponding SYSLOG device initializaiton now calls syslog_channel() 2016-06-19 13:03:20 -06:00
Gregory Nutt
d82942cf3b Merge remote-tracking branch 'origin/master' into syslog 2016-06-19 11:20:31 -06:00
Gregory Nutt
9f260ca193 Some renaming so that future features will fit in better; If the architecture provides its only system logging (via CONFIG_ARCH_SYSLOG), then syslog_initialize() is stubbed out 2016-06-19 11:16:12 -06:00
Gregory Nutt
19c6a82f8b a few cosmetic changes 2016-06-19 09:52:34 -06:00
Gregory Nutt
a43cdbff0b Add missing file header 2016-06-19 09:48:42 -06:00
Gregory Nutt
f59196247c Merge remote-tracking branch 'origin/master' into syslog 2016-06-19 09:47:13 -06:00
Gregory Nutt
99ad3e9bcf Need to capture return value from ramlog_syslog_initialize() 2016-06-19 09:41:35 -06:00
Gregory Nutt
0f18f3bd15 Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally 2016-06-19 09:39:21 -06:00
Gregory Nutt
de58cb6027 Some higher level SYSLOG features are disabled if the architecture-specific logic provides its own SYSLOG functionality 2016-06-19 09:21:52 -06:00
Gregory Nutt
3bd953316f Add a hook before the existing syslog_initialize() call; rename the old syslog_initialize() to syslog_dev_initialize(). 2016-06-19 09:12:33 -06:00
Gregory Nutt
12150bc6c1 Merge remote-tracking branch 'origin/master' into syslog 2016-06-19 08:48:10 -06:00